User Tools

Site Tools


doc:howto:apcupsd_es500
>>>>> Wiki-merge in process >>>>> wiki.openwrt.org + openwrt.org are going to be merged soon, this wiki therefore being read only. Once pages are transfered to openwrt.org, you can edit them again.

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
doc:howto:apcupsd_es500 [2017/12/02 08:02]
bobmseagithub fix typo
doc:howto:apcupsd_es500 [2017/12/02 18:53] (current)
bobmseagithub Add link to APC SmartUps HowTo
Line 2: Line 2:
  
 This describes how to connect an APC BackUps ES-500 via the USB port on a Linksys EA3500 router. This describes how to connect an APC BackUps ES-500 via the USB port on a Linksys EA3500 router.
-This includes collecting the data, and displaying graphs.+This includes collecting the data, and displaying graphs.  This page is closely related to [[doc:​howto:​apcupsd_su700|APC SmartUps SU-700 - Linksys EA3500 - Luci Graphs]], which is worth reviewing as well, especially if you run into difficulties.
  
 Note that the collected data will be lost after a reboot of the router. ​ To save the data, you need to put it on an external device, like a USB flash drive. ​ Connecting both the UPS and a flash drive to a USB hub, which is then connected to the router, works fine for me.  Note that the collected data will be lost after a reboot of the router. ​ To save the data, you need to put it on an external device, like a USB flash drive. ​ Connecting both the UPS and a flash drive to a USB hub, which is then connected to the router, works fine for me. 
doc/howto/apcupsd_es500.txt · Last modified: 2017/12/02 18:53 by bobmseagithub