User Tools

Site Tools


doc:howto:apcupsd_su700

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
doc:howto:apcupsd_su700 [2017/12/02 18:48]
bobmseagithub Change usb-to-serial converter to GUC232A. Add section: Saving the data across Reboots. Update heading format.
doc:howto:apcupsd_su700 [2017/12/02 20:10] (current)
bobmseagithub Add troubleshooting for collectd issue 617
Line 97: Line 97:
 If you don't have APC UPS graphs at this point, here are some things to check: If you don't have APC UPS graphs at this point, here are some things to check:
  
 +  - Change the data collection interval to 10 seconds. ​ This is a workaround for the issue reported in: https://​github.com/​collectd/​collectd/​issues/​617 .
 +    * Go to Statistics / Setup /
 +    * Change the Data collection interval to 10 seconds
   - Verify that serial communication to the UPS is working - On a PC   - Verify that serial communication to the UPS is working - On a PC
     * attach usb converter to PC     * attach usb converter to PC
doc/howto/apcupsd_su700.txt · Last modified: 2017/12/02 20:10 by bobmseagithub