User Tools

Site Tools


doc:howto:ddns.client
This wiki is read only and for archival purposes only. >>>>>>>>>> Please use the new OpenWrt wiki at https://openwrt.org/ <<<<<<<<<<

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
doc:howto:ddns.client [2018/01/02 16:35]
datashuttle [using scheduler]
doc:howto:ddns.client [2018/01/02 16:43] (current)
datashuttle [using scheduler]
Line 447: Line 447:
  
 === using scheduler === === using scheduler ===
-**__Since CC 15.05__** each configuration/​section of //​ddns-scripts//​ can be configured to run once including retry on error so it is guaranteed that the update is send to the provider.\\+**__Since CC 15.05__** each configuration/​section of //​ddns-scripts//​ can be configured to run onceincluding retry on errorso it is guaranteed that the update is sent to the provider.\\
  
-To configure your configuration/​section to run once you need to set '''​option force_interval'''​ to '''​0'''​. ​Setting ​of '''​option force_unit'''​ is ignored.\\ +To configure your configuration/​section to run onceset the '''​option force_interval'''​ to '''​0'''​. ​By doing so, any setting ​of '''​option force_unit'''​ is ignored.\\ 
-Inside LuCI set '''​Force Interval'''​ in [Timer Settings]-tab of your desired configuration\\ +Inside LuCIset the '''​Force Interval''' ​setting ​in the [Timer Settings]-tab of your desired configurationor edit '''/​etc/​config/​ddns''' ​via console.
-or edit '''/​etc/​config/​ddns''' ​on console.+
 <​code|/​etc/​config/​ddns>​ <​code|/​etc/​config/​ddns>​
 config '​service'​ '​myddns'​ config '​service'​ '​myddns'​
Line 459: Line 458:
  
 If you set //ddns// service to '''​enable''',​ then all configurations/​sections are started during interface '''​ifup'''​.\\ If you set //ddns// service to '''​enable''',​ then all configurations/​sections are started during interface '''​ifup'''​.\\
-The configuration/section ​configured to run once will stop after successful update.\\+The configurations/sections ​configured to run once will stop after successful update.\\
 To guarantee that your configurations only run once not looking for an interface event you need to disable //ddns// service.\\ To guarantee that your configurations only run once not looking for an interface event you need to disable //ddns// service.\\
 To start your configuration via [[doc:​howto:​notuci.config?#​etccrontabsroot_cronjob_aka_crontab|built-in crond]], use the following entry as the ''​command''​ inside the crontab configuration (replace '''​myddns'''​ with the name of your configuration/​section):​ To start your configuration via [[doc:​howto:​notuci.config?#​etccrontabsroot_cronjob_aka_crontab|built-in crond]], use the following entry as the ''​command''​ inside the crontab configuration (replace '''​myddns'''​ with the name of your configuration/​section):​
doc/howto/ddns.client.txt · Last modified: 2018/01/02 16:43 by datashuttle