User Tools

Site Tools


doc:howto:firstlogin
This wiki is read only and for archival purposes only. >>>>>>>>>> Please use the new OpenWrt wiki at https://openwrt.org/ <<<<<<<<<<

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
doc:howto:firstlogin [2017/10/05 07:34]
tmomas alte Version wiederhergestellt (2017/10/04 00:46)
doc:howto:firstlogin [2018/02/01 07:35] (current)
louie Adding ssh section over telnet, separating passwd section
Line 5: Line 5:
 |{{:​meta:​icons:​tango:​48px-dialog-warning.svg.png?​nolink&​24}}| **Pre-built trunk images do not come with any web interface or GUI**. You will only be able to login using the CLI, unless you install one yourself: [[doc:​howto:​luci.essentials|LuCI Essentials]] ​ | |{{:​meta:​icons:​tango:​48px-dialog-warning.svg.png?​nolink&​24}}| **Pre-built trunk images do not come with any web interface or GUI**. You will only be able to login using the CLI, unless you install one yourself: [[doc:​howto:​luci.essentials|LuCI Essentials]] ​ |
  
-|{{:​meta:​icons:​tango:​48px-dialog-warning.svg.png?​nolink&​24}}| **Telnet was removed from trunk by 46809. In a newer trunk build, only ssh is available. Note : As of 30/04/2016, Telnet is still available in OpenWrt 15.05.1** ​ |+|{{:​meta:​icons:​tango:​48px-dialog-warning.svg.png?​nolink&​24}}| **Telnet was removed from trunk as of build 46809. In a newer trunk build, only ssh is available. Note : As of 30/04/2016, Telnet is still available in OpenWrt 15.05.1** ​ |
  
 ===== Command-line Interface(CLI) ===== ===== Command-line Interface(CLI) =====
Line 18: Line 18:
 ===== OpenWrt System Default ===== ===== OpenWrt System Default =====
 {{page>​doc:​openwrt_system_default_features&​noheader&​nofooter&​noeditbtn}} {{page>​doc:​openwrt_system_default_features&​noheader&​nofooter&​noeditbtn}}
 +
 +===== Login with ssh =====
 +  * login to your router via **''​ssh''​**:​ (The following example was done with PuTTY).<​code>​
 +login as: root
 +
 +
 +BusyBox v1.24.2 () built-in shell (ash)
 +
 +  _______ ​                    ​________ ​       __
 + ​| ​      ​|.-----.-----.-----.| ​ |  |  |.----.| ​ |_
 + ​| ​  ​- ​  ​|| ​ _  |  -__|     ​|| ​ |  |  ||   ​_|| ​  _|
 + ​|_______|| ​  ​__|_____|__|__||________||__| ​ |____|
 +          |__| W I R E L E S S   F R E E D O M
 + ​-----------------------------------------------------
 + ​DESIGNATED DRIVER (Bleeding Edge, 50140)
 + ​-----------------------------------------------------
 +  * 2 oz. Orange Juice         ​Combine all juices in a
 +  * 2 oz. Pineapple Juice      tall glass filled with
 +  * 2 oz. Grapefruit Juice     ice, stir well.
 +  * 2 oz. Cranberry Juice
 + ​-----------------------------------------------------
 +root@OpenWrt:​~#​
 +</​code>​
  
 ===== Login with telnet ===== ===== Login with telnet =====
Line 52: Line 75:
 Note : DO NOT USE the command line "​telnet 192.168.1.1"​ because this connection does not work, you will have this message "​Encryption could not be enabled."​ and next telnet connection is closed by OpenWrt device. Note : DO NOT USE the command line "​telnet 192.168.1.1"​ because this connection does not work, you will have this message "​Encryption could not be enabled."​ and next telnet connection is closed by OpenWrt device.
  
 +===== Setting a password =====
   * type **''​passwd''​** into the prompt. You will be prompted to set a new password for the user root:<​code>​   * type **''​passwd''​** into the prompt. You will be prompted to set a new password for the user root:<​code>​
 root@OpenWrt:/#​ passwd root@OpenWrt:/#​ passwd
doc/howto/firstlogin.txt · Last modified: 2018/02/01 07:35 by louie