User Tools

Site Tools


doc:howto:generic.failsafe

Old Revisions

These are the older revisons of the current document. To revert to an old revision, select it from below, click Edit this page and save it.

  • 2016/01/03 15:16 OpenWrt Failsafe – [Stage 2: Detect when failsafe mode can be triggered] hnyman (current)
  • 2015/10/29 00:33 Show differences to current revisions OpenWrt Failsafe [Flash new firmware in failsafe mode] edit "on router via telnet nc ip salmander
  • 2015/10/28 23:56 Show differences to current revisions OpenWrt Failsafe add "Flash new firmware in failsafe mode" it's only able via netcat. i struggle half a day with this problem. hope it helps others. salmander
  • 2015/09/08 11:58 Show differences to current revisions OpenWrt Failsafe [Stage 4: Log into the router using failsafe] KanjiMonster
  • 2015/07/18 07:42 OpenWrt Failsafe[Stage 2: Detect when failsafe mode can be triggered] grumbler_eburg
  • 2015/07/18 07:19 OpenWrt Failsafe[Stage 1: Computer IP settings] grumbler_eburg
  • 2015/07/03 18:17 OpenWrt Failsafe[OpenWrt Failsafe] edited grammer in opening sentence zacsketches
  • 2014/10/21 23:31 OpenWrt Failsafelink for changeset 42985 added tmomas
  • 2014/10/21 23:26 OpenWrt FailsafeAdditional note (r42985) added tmomas
  • 2014/06/22 19:22 OpenWrt Failsafe zxdavb
  • 2014/06/22 19:21 OpenWrt Failsafe zxdavb
  • 2014/02/19 09:12 OpenWrt Failsafefix "filesafe" to "failsafe" flashadmin
  • 2014/01/12 17:45 OpenWrt Failsafe jeffkletsky
  • 2014/01/12 17:43 OpenWrt FailsafeAdditional information on TP-Link routers and failsafe jeffkletsky
  • 2013/12/07 20:33 OpenWrt Failsafe timmillerdyck
  • 2013/12/07 20:33 OpenWrt Failsafeblink speed update timmillerdyck
  • 2013/12/07 20:23 OpenWrt FailsafeAdd information on detecting safe mode using a LED blink method timmillerdyck
  • 2013/07/16 21:11 OpenWrt Failsafe lorema
  • 2013/07/03 11:45 OpenWrt Failsaferemove bs lorema
  • 2013/07/03 11:44 OpenWrt Failsafe lorema
  • 2013/07/03 11:42 OpenWrt Failsafeon eth0 lorema
  • 2013/07/03 11:15 OpenWrt Failsafe lorema
  • 2013/07/03 11:13 OpenWrt Failsaferemove the "important" information lorema
  • 2013/07/03 11:12 OpenWrt Failsaferemove the dumb warning lorema
  • 2013/07/03 11:11 OpenWrt Failsafereplace "box" with "device"; introduce link to -> [[doc:howto:generic.debrick]] lorema
  • 2013/06/07 10:49 OpenWrt Failsafe lorema
  • 2013/06/07 10:45 OpenWrt Failsafe lorema
  • 2013/06/07 10:34 OpenWrt Failsafe lorema
  • 2013/05/23 17:38 OpenWrt Failsafe xorox90
  • 2013/05/23 17:38 OpenWrt Failsafe xorox90
  • 2013/04/18 15:24 OpenWrt Failsaferemoved unconfirmed information.. telnet does not require currently connected port be it wan or ethernet to be changed khairilyazit
  • 2013/04/18 14:14 OpenWrt Failsafe 70d7a4f46
  • 2013/02/14 07:04 OpenWrt Failsafe buntalo
  • 2013/02/11 14:30 OpenWrt Failsafe buntalo
  • 2013/02/11 14:26 OpenWrt Failsafe buntalo
  • 2013/02/11 14:24 OpenWrt Failsafe buntalo
  • 2013/02/11 14:24 OpenWrt Failsafe buntalo
  • 2013/02/11 14:21 OpenWrt Failsafe buntalo
  • 2013/01/07 18:20 OpenWrt Failsafeedit for readibility eugenius
  • 2013/01/06 21:14 OpenWrt Failsafe eugenius
  • 2012/10/22 19:44 OpenWrt Failsafeadd fancy images jow
  • 2012/10/22 19:16 OpenWrt Failsafenote on recvudp for win32 jow
  • 2012/09/25 15:53 OpenWrt Failsafeadd warning about switch leaking hauke
  • 2012/09/25 15:47 OpenWrt Failsafeadd listen for port 4919 and could be just one Ethernet port hauke
  • 2012/09/16 08:00 OpenWrt Failsafeold revision restored orca
  • 2012/09/15 16:06 OpenWrt Failsafe se13322
  • 2012/07/25 09:08 OpenWrt Failsafe 70d7a4f46
  • 2012/07/25 09:07 OpenWrt Failsafe 70d7a4f46
  • 2012/07/22 19:05 OpenWrt Failsafe 70d7a4f46
  • 2012/07/22 18:57 OpenWrt Failsafe 70d7a4f46
  • 2012/07/22 18:56 OpenWrt Failsafe 70d7a4f46
  • 2012/07/22 18:45 OpenWrt Failsafe 70d7a4f46
  • 2012/07/22 18:44 OpenWrt Failsafe 70d7a4f46
  • 2012/07/22 18:40 OpenWrt Failsafe 70d7a4f46
  • 2012/05/06 16:38 OpenWrt Failsafedevice specific info turned over to device page arminm
  • 2012/05/06 16:34 OpenWrt Failsafe arminm
  • 2012/05/06 16:32 OpenWrt Failsafeadding info arminm
  • 2012/04/17 01:45 OpenWrt Failsafe bateau
  • 2012/04/02 02:51 OpenWrt FailsafeLooks redundant to me. Both of the last lines lead to factory reset. blindbox
  • 2012/04/02 02:50 OpenWrt Failsafe blindbox
  • 2012/04/02 02:46 OpenWrt FailsafeWhy are we hiding the command called 'firstboot'? It got deleted and I'm adding it back in blindbox
  • 2012/03/13 13:37 OpenWrt Failsafe almursi
  • 2012/03/12 19:31 OpenWrt Failsafeclean overlay with rm almursi
  • 2011/12/10 00:45 OpenWrt Failsafe written_direcon
  • 2011/11/05 14:22 OpenWrt Failsafeis not generic orca
  • 2011/10/30 05:03 OpenWrt FailsafeI hope this is more acceptable, hopefully a google search "openwrt factory reset" will find this page ispyisail
  • 2011/10/30 01:22 OpenWrt Failsafeold revision restored orca
  • 2011/10/30 00:27 OpenWrt Failsafe ispyisail
  • 2011/10/19 05:59 OpenWrt Failsafe h
  • 2011/10/18 01:49 OpenWrt FailsafeLess fud. Sorry, all the routers I've tried, they all have configurable buttons blindbox
  • 2011/10/05 11:31 OpenWrt Failsafe orca
  • 2011/09/23 17:14 OpenWrt Failsafere-arange orca
  • 2011/08/28 11:50 OpenWrt Failsafe orca
  • 2011/08/27 21:52 OpenWrt Failsafe blindbox
  • 2011/08/19 12:29 OpenWrt Failsafelink to script in dev orca
  • 2011/08/19 12:21 OpenWrt Failsafemended orca
  • 2011/07/28 15:13 OpenWrt Failsafehow to reboot in failsafe without power-cycling bastian.bittorf
  • 2011/07/27 13:39 OpenWrt Failsafeclarify mount_root loswillios
  • 2011/07/24 16:00 OpenWrt Failsafeextendet with steps i used to recover andreas85
  • 2011/05/28 20:28 OpenWrt FailsafeGeneralised the hardware button method and removed additional infos blindbox
  • 2011/04/04 18:42 OpenWrt Failsafelink to preinit orca
  • 2011/03/30 21:00 OpenWrt Failsafe marcoanttonnio
  • 2011/03/23 21:17 OpenWrt Failsafe rommon
  • 2011/03/23 21:16 OpenWrt Failsafe rommon
  • 2011/03/21 01:36 OpenWrt Failsafe orca
  • 2011/03/20 23:03 OpenWrt Failsafenot done yet orca
  • 2011/03/20 18:03 OpenWrt FailsafeLinks to inbox:booting changed to doc:techref:process.boot orca
  • 2011/03/20 01:35 OpenWrt Failsafeexplain don't just erase orca
  • 2011/03/19 21:56 OpenWrt Failsafe written_direcon
  • 2011/03/17 17:29 OpenWrt Failsafe orca
  • 2011/03/17 17:24 OpenWrt Failsafe orca
  • 2011/03/17 17:23 OpenWrt Failsafeangelegt orca
doc/howto/generic.failsafe.txt · Last modified: 2016/01/03 15:16 by hnyman