User Tools

Site Tools


doc:howto:virtualbox

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
doc:howto:virtualbox [2013/04/15 16:34]
karlp update links to AA 12.09
doc:howto:virtualbox [2015/05/22 01:34] (current)
jow [Prerequisites]
Line 6: Line 6:
   * Get an OpenWrt image:   * Get an OpenWrt image:
     * Download vdi image (ex. [[http://​downloads.openwrt.org/​attitude_adjustment/​12.09/​x86/​generic/​openwrt-x86-generic-combined-ext4.vdi|attitude_adjustment/​12.09/​x86/​]])     * Download vdi image (ex. [[http://​downloads.openwrt.org/​attitude_adjustment/​12.09/​x86/​generic/​openwrt-x86-generic-combined-ext4.vdi|attitude_adjustment/​12.09/​x86/​]])
-    * Download and convert raw image (ex. [[http://​downloads.openwrt.org/​attitude_adjustment/​12.09/​x86/​generic/​openwrt-x86-generic-rootfs-ext4.img.gz|attitude_adjustment/​12.09/​x86/​]])+    * Download and convert raw image (ex. [[https://​downloads.openwrt.org/​attitude_adjustment/​12.09/​x86/​generic/​openwrt-x86-generic-combined-ext4.img.gz|attitude_adjustment/​12.09/​x86/​]])
     * Compile your own image (//Target System -> x86// and //Target Images -> Build VirtualBox image files//) (ext4 needs to be enabled first)     * Compile your own image (//Target System -> x86// and //Target Images -> Build VirtualBox image files//) (ext4 needs to be enabled first)
  
Line 54: Line 54:
  
 ===== Troubleshooting ===== ===== Troubleshooting =====
-  * If your virtual machine won't boot, make sure your hard disk is connected using IDE (not SATA)+  * If your virtual machine won't boot, make sure your hard disk is connected using SATA (not IDE)
     * Right click your machine'​s entry on the machine list and choose //​Settings//​ then select //Storage//     * Right click your machine'​s entry on the machine list and choose //​Settings//​ then select //Storage//
-    * If you see that your hard disk image is connected to a SATA controller; under //Storage Tree// select the //SATA Controller//​ entry and then click //Remove Controller//​ +    * If you see that your hard disk image is connected to a IDE controller; under //Storage Tree// select the //IDE Controller//​ entry and then click //Remove Controller//​ 
-    * Click //Add Controller//​ and then select //IDE Controller//​ +    * Click //Add Controller//​ and then select //SATA Controller//​ 
-    * Select the //IDE Controller//​ you just added and then click //Add Attachment//​ and choose //Add Hard Disk//+    * Select the //SATA Controller//​ you just added and then click //Add Attachment//​ and choose //Add Hard Disk//
     * Add your OpenWRT image as before     * Add your OpenWRT image as before
  
doc/howto/virtualbox.1366036471.txt.bz2 · Last modified: 2013/04/15 16:34 by karlp