User Tools

Site Tools


doc:howto:wireless.hotspot.wifidog

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

doc:howto:wireless.hotspot.wifidog [2012/10/08 20:19] (current)
Line 1: Line 1:
 +====== WiFiDog ======
 +Please read [[wp>​WiFiDog Captive Portal]] for a definition of WiFiDog. It is FOSS software used to create wireless hot-spots. It is a next-generation alternative to [[http://​nocat.net/​|NoCat]]. For more information look at the [[http://​dev.wifidog.org/​wiki/​FAQ | wifidog FAQ]]. [[wp>​Captive portal]].
 +
 +  * [[http://​dev.wifidog.org/​]]
 +  * [[http://​www.authpuppy.org/​]]
 +
 +===== Preparation =====
 +==== Prerequisites ====
 +==== Required Packages ====
 +  * iptables-mod-extra ​
 +  * iptables-mod-ipopt
 +  * kmod-ipt-nat
 +  * iptables-mod-nat-extra
 +  * libpthread
 +
 +===== Installation =====
 +[[doc:​techref:​opkg]]
 +<code bash>
 +opkg update
 +opkg install wifidog
 +vi /​etc/​wifidog.conf
 +/​etc/​init.d/​wifidog enable
 +/​etc/​init.d/​wifidog start
 +netstat -a
 +</​code>​
 +
 +You can also run wifidog in foreground/​debug mode:
 +
 +<code bash>
 +wifidog -f -d 7
 +  -f means to run in foreground (do not become a background daemon)
 +  -d 7 increases debug output level to the maximum
 +</​code>​
 +
 +===== Configuration =====
 +
 +===== Start on boot =====
 +To enable/​disable start on boot:\\
 +''/​etc/​init.d/​wifidog enable'' ​ this simply creates a symlink: ''/​etc/​rc.d/​S?​0???​ -> /​etc/​init.d/???''​\\
 +''/​etc/​init.d/​wifidog disable''​ this removes the symlink again\\
 +
 +===== Administration =====
 +Follow instructions on [[http://​dev.wifidog.org/​wiki/​doc/​install/​auth-server]]
 +
 +===== Troubleshooting =====
 +
 +
 +===== Notes =====
 +  * The Project Homepage: [[http://​dev.wifidog.org/​]]
 +  * [[https://​forum.openwrt.org/​viewtopic.php?​id=24926|How to offer 2 hotspots with WiFiDog with Kernel 2.4]]
  
doc/howto/wireless.hotspot.wifidog.txt · Last modified: 2012/10/08 20:19 (external edit)