User Tools

Site Tools


doc:howtobuild:build.wndr3700

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
doc:howtobuild:build.wndr3700 [2013/01/01 22:40]
deezer
doc:howtobuild:build.wndr3700 [2013/01/01 22:43] (current)
deezer
Line 50: Line 50:
     * NOTE: **pfk3** didn't do this step and by default OpenWrt was built with 192.168.1.1 & 255.255.255.0 for it's LAN IP/subnet.     * NOTE: **pfk3** didn't do this step and by default OpenWrt was built with 192.168.1.1 & 255.255.255.0 for it's LAN IP/subnet.
     * NOTE: You still have to "​*"​ this option in order for the router to be on the network. You don't have to change the settings though     * NOTE: You still have to "​*"​ this option in order for the router to be on the network. You don't have to change the settings though
-    * NOTE: It is not possible to set this feature in the latest [[https://​dev.openwrt.org/​changeset/​31258/​|attitude adjustment]] release+    * NOTE: It is not possible to set this feature in the latest [[https://​dev.openwrt.org/​changeset/​31258/​|attitude adjustment]] release.  See this [[http://​www.mail-archive.com/​openwrt-devel@lists.openwrt.org/​msg15992.html|mailing list post]] for more information.
   - Network -> CRDA = YES (compile as built-in package with "​*",​ not as a module with "​M"​)   - Network -> CRDA = YES (compile as built-in package with "​*",​ not as a module with "​M"​)
   - Kernel Modules -> LED Modules -> kmod-leds-wndr3700-usb = YES (compile as built-in driver as "​*",​ not as a module with "​M"​)   - Kernel Modules -> LED Modules -> kmod-leds-wndr3700-usb = YES (compile as built-in driver as "​*",​ not as a module with "​M"​)
Line 64: Line 64:
 </​code>​ </​code>​
 and it should merrily build away for at least a good half hour (or more). When you're done, you should have the resulting binaries stored in ''​~/​openwrt/​trunk/​bin/​ar71xx''​. As of trunk revision 25119, separate binaries will be created for the WNDR3700v1 and WNDR3700v2. and it should merrily build away for at least a good half hour (or more). When you're done, you should have the resulting binaries stored in ''​~/​openwrt/​trunk/​bin/​ar71xx''​. As of trunk revision 25119, separate binaries will be created for the WNDR3700v1 and WNDR3700v2.
- 
  
 ===== Installation ===== ===== Installation =====
 Please see [[toh/​netgear/​wndr3700#​installation|WNDR3700 - Installation]] or [[doc:​howto:​generic.flashing|OpenWrt - Installation]] Please see [[toh/​netgear/​wndr3700#​installation|WNDR3700 - Installation]] or [[doc:​howto:​generic.flashing|OpenWrt - Installation]]
doc/howtobuild/build.wndr3700.txt · Last modified: 2013/01/01 22:43 by deezer