Differences

This shows you the differences between two versions of the page.

doc:uci:wireless:encryption [2013/01/28 18:53]
hrebec Added section describing WPA2 Enterprise PEAP-GTC
doc:uci:wireless:encryption [2014/09/05 06:01] (current)
josephoenix Warn users to install required packages for 802.1x (other section)
Line 55: Line 55:
</code> </code>
-:!: For the key only letters (upper and lower case) and numbers are allowed. The length must be between 8 and 63 characters. +:!: The length must be between 8 and 63 characters. If the key length is 64 characters, it is treated as hex encoded.
-If the key length is 64 characters, it is treated as hex encoded.+
==== Configure WPA2 (PSK) ==== ==== Configure WPA2 (PSK) ====
Line 68: Line 67:
</code> </code>
-:!: For the key only letters (upper and lower case) and numbers are allowed. The length must be between 8 and 63 characters. +:!: The length must be between 8 and 63 characters. If the key length is 64 characters, it is treated as hex encoded.
-If the key length is 64 characters, it is treated as hex encoded.+
==== Configure WPA2 Enterprise (EAP-TLS with external RADIUS server) ==== ==== Configure WPA2 Enterprise (EAP-TLS with external RADIUS server) ====
 +
 +:!: The default ''-mini'' packages for Atheros hardware will not work with Enterprise mode. (See the [[#atheros.and.generic.mac80211.wifi|table above]].)
The example below defines WPA2 Enterprise encryption in AP mode with authentication against an external RADIUS server at 192.168.1.200, port 1812. The example below defines WPA2 Enterprise encryption in AP mode with authentication against an external RADIUS server at 192.168.1.200, port 1812.
Line 86: Line 86:
==== Configure WPA2 Enterprise Client, PEAP-GTC using One Time Password (OTP) ==== ==== Configure WPA2 Enterprise Client, PEAP-GTC using One Time Password (OTP) ====
 +:!: The default ''-mini'' packages for Atheros hardware will not work with Enterprise mode. (See the [[#atheros.and.generic.mac80211.wifi|table above]].)
 +
  *Enter the following:   *Enter the following:
<code> <code>
Line 101: Line 103:
  *Enter the following:   *Enter the following:
<code> <code>
-root@OpenWrt:~# wpa_cli -p /var/run wpa_supplicant-wlan0.conf+root@OpenWrt:~# wpa_cli -p /var/run/wpa_supplicant-wlan0
>status >status
</code> </code>

Back to top

doc/uci/wireless/encryption.1359395591.txt.bz2 · Last modified: 2013/01/28 18:53 (external edit)