User Tools

Site Tools


inbox:ubiquiti:ubiquiti_nanostation_ac_loco
>>>>> Wiki-merge in process >>>>> wiki.openwrt.org + openwrt.org are going to be merged soon, this wiki therefore being read only. Once pages are transfered to openwrt.org, you can edit them again.

Ubiquiti Nanostation AC loco

Under Construction!
This page is currently under construction. You can edit the article to help completing it.

The Ubiquiti NanoStation AC loco is a (dual band) 5 GHz AC outdoor PoE CPE. NanoStation AC loco

OpenWrt support

WIP, working OpenWrt tree on GitHub

Hardware highlights

CPU Ram Flash Network WLAN USB Serial JTag
Atheros AR9342 @ 535 MHz 64 MiB 16 MiB 1x 1000/100/10 bgn/ac No Yes No

Hardware

Info

Architecture: MIPS
Vendor: Ubiquiti
Bootloader: U-Boot
System-On-Chip: Atheros AR9342 - MIPS 74Kc V4.12
CPU/Speed 535 MHz
Flash-Chip: Macronix MX25L12805D
Flash size: 128 Mbit
RAM: 64 MiB
Wireless: Atheros AR9342 & Qualcomm/Atheros QCA988X
Ethernet: 1000/100/10 Mbit/s (Atheros AR8035 PHY)
USB: None
Serial: Yes, 8N1 115200
JTAG: No

Photos

Insert photo of front of the casing

Insert photo of back of the casing

Insert photo of backside label

Opening the case

Depress the latch on the back of the device

Slide out the PCB assembly

Serial

port.serial general information about the serial port, serial port cable, etc.

How to connect to the Serial Port of this specific device:
Serial port

Serial connection parameters
for Ubiquiti Nanostation AC loco
115200, 8N1

JTAG

None

Bootlogs

OEM bootlog

COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE


OpenWrt bootlog

COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING


Notes

Tags

inbox/ubiquiti/ubiquiti_nanostation_ac_loco.txt · Last modified: 2018/01/31 19:21 by tsys