User Tools

Site Tools


playground:meshextender2

Serval Project Mesh Extender v2.0

Under Construction!
This page is currently under construction. You can edit the article to help completing it.

First prototype

OpenWrt support

The device ships with OpenWrt 14.07 Barrier Breaker, inside the GL-iNet Domino Core

Hardware highlights

CPU Ram Flash Network WLAN USB Serial JTag
Atheros AR9331 @ 400 MHz 64 MiB 16 MiB 2x 10/100 bgn 1x 2.0 Yes ?

Installation

Hardware

Info

Architecture: MIPS
Vendor: Qualcomm Atheros
Bootloader: U-Boot
System-On-Chip: Atheros AR9331 - MIPS 24K
CPU/Speed 400 MHz
Flash-Chip: Winbond
Flash size: 16 MiB
RAM: 64 MiB
Wireless: AR9331 2.4GHz 802.11bgn
Ethernet: 2 x 10/100 Mbit/s w/ vlan support
USB: 1x 2.0
Serial: Yes
JTAG: Not populated

Photos

Insert photo of front of the casing

Insert photo of back of the casing

Insert photo of backside label

Insert photo of PCB

Opening the case

FIXME Describe what needs to be done to open the device, e.g. remove rubber feet, adhesive labels, screws, …

Serial

port.serial general information about the serial port, serial port cable, etc.

How to connect to the Serial Port of this specific device:
Insert photo of PCB with markings for serial port

FIXME Replace EXAMPLE by real values.

Serial connection parameters
for Evaluation boards / unbranded boards meshextender2 @@Version@@
EXAMPLE 115200, 8N1

JTAG

port.jtag general information about the JTAG port, JTAG cable, etc.

How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port

Bootlogs

OEM bootlog

COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE


OpenWrt bootlog

COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING


Notes

Tags

playground/meshextender2.txt · Last modified: 2016/12/20 13:49 by gui