User Tools

Site Tools


toh:asus:rt-ac56u

Asus RT-AC56U

If you can confirm that OpenWrt is running on this device (i.e. you or someone else has tested it), please update the data accordingly. → Click View/Edit data

IEEE 802.11ac capable device from 2013. Works with Chaos Calmer 15.05 without 802.11ac support

SoC: Broadcom BCM4708A0 (MIPS ????@800 MHz)
Flash: 128 MiB (Spansion?)
RAM: 256MiB ESMT M15F2G16128A
Wireless: Broadcom BCM43217 for bgn + Broadcom BCM4352 for ac/an
USB : 2x (with USB 3.0 support?)

Firmware Images

Official

Snapshot

Flashing Firmware

The firmware can be flashed from within the OEM web interface.

Bootlog/dmesg output

OpenWRT

root@OpenWrt:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 SMP Fri Sep 4 14:50:34 CEST 2015 [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Asus RT-AC56U (BCM4708) [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 65536 [ 0.000000] free_area_init_node: node 0, pgdat c0371640, node_mem_map c6df8000 [ 0.000000] Normal zone: 256 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] HighMem zone: 4352 pages used for memmap [ 0.000000] HighMem zone: 32768 pages, LIFO batch:7 [ 0.000000] PERCPU: Embedded 9 pages/cpu @c6dd4000 s5952 r8192 d22720 u36864 [ 0.000000] pcpu-alloc: s5952 r8192 d22720 u36864 alloc=9*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65280 [ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 255948K/262144K available (2886K kernel code, 106K rwdata, 404K rodata, 180K init, 276K bss, 6196K reserved, 131072K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc033edc4 (3292 kB) [ 0.000000] .init : 0xc033f000 - 0xc036c000 ( 180 kB) [ 0.000000] .data : 0xc036c000 - 0xc03869b8 ( 107 kB) [ 0.000000] .bss : 0xc03869b8 - 0xc03cbacc ( 277 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: platform modifies aux control register: 0x0a130000 -> 0x7a530001 [ 0.000000] L2C: platform provided aux values permit register corruption. [ 0.000000] L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x7a530001 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e530001 [ 0.000014] sched_clock: 64 bits at 400MHz, resolution 2ns, wraps every 2748779069440ns [ 0.008560] Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816) [ 0.101298] pid_max: default: 32768 minimum: 301 [ 0.106263] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.113121] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.120937] CPU: Testing write buffer coherency: ok [ 0.126260] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.132248] Setting up static identity map for 0x11a60 - 0x11a94 [ 0.140258] CPU1: Booted secondary processor [ 0.178358] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.178445] Brought up 2 CPUs [ 0.191899] SMP: Total of 2 processors activated (3188.32 BogoMIPS). [ 0.198498] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x13) [ 0.207213] CPU: This may indicate a broken bootloader or firmware. [ 0.221001] NET: Registered protocol family 16 [ 0.226386] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.270272] Switched to clocksource arm_global_timer [ 0.276470] NET: Registered protocol family 2 [ 0.281904] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.289148] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) [ 0.295748] TCP: Hash tables configured (established 1024 bind 1024) [ 0.302392] TCP: reno registered [ 0.305787] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.311868] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.318576] NET: Registered protocol family 1 [ 0.323167] PCI: CLS 0 bytes, default 64 [ 0.324056] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.331227] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.337292] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.347622] msgmni has been set to 243 [ 0.352067] bounce: pool size: 64 pages [ 0.356094] io scheduler noop registered [ 0.360218] io scheduler deadline registered (default) [ 0.365874] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.374770] console [ttyS0] disabled [ 0.378593] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 117, base_baud = 6250000) is a 16550 [ 0.387779] console [ttyS0] enabled [ 0.394912] bootconsole [earlycon0] disabled [ 0.403966] 18000400.serial: ttyS1 at MMIO 0x18000400 (irq = 117, base_baud = 6250000) is a 16550 [ 0.414157] libphy: Fixed MDIO Bus: probed [ 0.418309] bgmac: Broadcom 47xx GBit MAC driver loaded [ 0.423713] bcma: bus0: Found chip with id 53010, rev 0x00 and package 0x02 [ 0.430737] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2A, class 0x0) [ 0.439309] bcma: bus0: bcma_of_get_irq() failed with rc=-22 [ 0.439322] bcma: bus0: Core 1 found: Chipcommon B (manuf 0x4BF, id 0x50B, rev 0x01, class 0x0) [ 0.448049] bcma: bus0: bcma_of_get_irq() failed with rc=-22 [ 0.448061] bcma: bus0: Core 2 found: DMA (manuf 0x4BF, id 0x502, rev 0x01, class 0x0) [ 0.456013] bcma: bus0: Core 3 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0) [ 0.464400] bcma: bus0: Core 4 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0) [ 0.472788] bcma: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0) [ 0.481170] bcma: bus0: Core 6 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0) [ 0.489518] bcma: bus0: Core 7 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0) [ 0.498052] bcma: bus0: Core 8 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0) [ 0.506591] bcma: bus0: Core 9 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0) [ 0.515158] bcma: bus0: bcma_of_get_irq() failed with rc=-22 [ 0.515171] bcma: bus0: Core 10 found: ARM Cortex A9 core (ihost) (manuf 0x4BF, id 0x510, rev 0x01, class 0x0) [ 0.525198] bcma: bus0: Core 11 found: USB 2.0 (manuf 0x4BF, id 0x504, rev 0x01, class 0x0) [ 0.533574] bcma: bus0: Core 12 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x01, class 0x0) [ 0.541972] bcma: bus0: bcma_of_get_irq() failed with rc=-22 [ 0.541985] bcma: bus0: Core 13 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0) [ 0.550198] bcma: bus0: bcma_of_get_irq() failed with rc=-22 [ 0.550210] bcma: bus0: Core 14 found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0) [ 0.559549] bcma: bus0: bcma_of_get_irq() failed with rc=-22 [ 0.559562] bcma: bus0: Core 15 found: Denali DDR2/DDR3 memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0) [ 0.570282] bcma: bus0: bcma_of_get_irq() failed with rc=-22 [ 0.570294] bcma: bus0: Core 16 found: ROM (manuf 0x4BF, id 0x508, rev 0x01, class 0x0) [ 0.578330] bcma: bus0: Core 17 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0) [ 0.587930] bcma: bus0: bcma_of_get_irq() failed with rc=-22 [ 0.587943] bcma: bus0: Core 18 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0) [ 0.608443] bcm_nand bcma0:17: NAND Controller rev 6.01 [ 0.638417] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1 [ 0.644746] nand: AMD/Spansion NAND 128MiB 3,3V 8-bit [ 0.649788] nand: 128MiB, SLC, page size: 2048, OOB size: 64 [ 0.656922] mtd_read error while parsing (offset: 0x20000)! [ 1.785136] random: nonblocking pool is initialized [ 2.058682] 5 bcm47xxpart partitions found on MTD device bcm_nand [ 2.064747] Creating 5 MTD partitions on "bcm_nand": [ 2.069706] 0x000000000000-0x000000080000 : "boot" [ 2.076243] 0x000000080000-0x000000200000 : "nvram" [ 2.084694] 0x000000200000-0x000008000000 : "firmware" [ 2.329273] 0x00000020001c-0x000000600000 : "linux" [ 2.342436] 0x000000600000-0x000008000000 : "ubi" [ 2.580039] bcm53xxspiflash spi32766.0: unrecognized JEDEC id bytes: ff, ff, ff [ 2.587385] bcm53xxspiflash: probe of spi32766.0 failed with error -2 [ 2.649728] can not parse nvram name (null)boardnum(null) with value 40:16:7e:6c:22:10 got -22 [ 2.729890] bcma: bus0: Using SPROM revision 8 provided by platform. [ 2.730220] bgmac bcma0:3: Found PHY addr: 30 (NOREGS) [ 2.736225] bgmac bcma0:3: Support for Roboswitch not implemented [ 2.743930] b53_common: found switch: BCM53011, rev 3 [ 2.749761] bgmac bcma0:4: Invalid MAC addr: 00:00:00:00:00:00 [ 2.755600] bgmac bcma0:4: Using random MAC: ae:1b:8d:16:05:0d [ 2.761488] bgmac bcma0:4: Found PHY addr: 0 [ 2.767645] bgmac: Timeout waiting for reg 0x180 [ 2.772271] bgmac bcma0:4: Writing to PHY 0 register 0x0 failed [ 2.779297] bgmac: Timeout waiting for reg 0x180 [ 2.783894] bgmac bcma0:4: Reading PHY 0 register 0x0 failed [ 2.789532] bgmac bcma0:4: PHY reset failed [ 2.793701] bgmac bcma0:4: Support for Roboswitch not implemented [ 2.800872] bgmac bcma0:5: Invalid MAC addr: 00:00:00:00:00:00 [ 2.806712] bgmac bcma0:5: Using random MAC: 8a:1e:59:a2:1b:a9 [ 2.812609] bgmac bcma0:5: Found PHY addr: 0 [ 2.818779] bgmac: Timeout waiting for reg 0x180 [ 2.823380] bgmac bcma0:5: Writing to PHY 0 register 0x0 failed [ 2.830408] bgmac: Timeout waiting for reg 0x180 [ 2.835007] bgmac bcma0:5: Reading PHY 0 register 0x0 failed [ 2.840648] bgmac bcma0:5: PHY reset failed [ 2.844812] bgmac bcma0:5: Support for Roboswitch not implemented [ 2.851964] bgmac: Unsupported core_unit 3 [ 2.856063] bgmac: probe of bcma0:6 failed with error -524 [ 2.861667] pci_host_bcm5301x bcma0:7: initializing PCIe controller [ 3.138382] pci_host_bcm5301x bcma0:7: link: UP [ 3.143038] pci_host_bcm5301x bcma0:7: PCI host bridge to bus 0000:00 [ 3.149482] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fffffff] [ 3.156329] pci_bus 0000:00: root bus resource [io 0x0000] [ 3.161888] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 3.169806] pci 0000:00:00.0: [14e4:8011] type 01 class 0x020000 [ 3.169870] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 3.170075] PCI: bus0: Fast back to back transfers disabled [ 3.175793] pci 0000:01:00.0: [14e4:a8db] type 00 class 0x028000 [ 3.175837] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit] [ 3.175947] pci 0000:01:00.0: supports D1 D2 [ 3.176143] PCI: bus1: Fast back to back transfers disabled [ 3.181720] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.181740] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01 [ 3.181851] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff] [ 3.188628] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x08007fff 64bit] [ 3.195920] pci 0000:00:00.0: PCI bridge to [bus 01] [ 3.200873] pci 0000:00:00.0: bridge window [mem 0x08000000-0x080fffff] [ 3.207791] pci_host_bcm5301x bcma0:8: initializing PCIe controller [ 3.488376] pci_host_bcm5301x bcma0:8: link: UP [ 3.493016] pci_host_bcm5301x bcma0:8: PCI host bridge to bus 0001:00 [ 3.499458] pci_bus 0001:00: root bus resource [mem 0x40000000-0x47ffffff] [ 3.506300] pci_bus 0001:00: root bus resource [io 0x0000] [ 3.511858] pci_bus 0001:00: No busn resource found for root bus, will use [bus 00-ff] [ 3.519764] pci 0001:00:00.0: [14e4:8011] type 01 class 0x020000 [ 3.519821] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold [ 3.520018] PCI: bus0: Fast back to back transfers disabled [ 3.525709] pci 0001:01:00.0: [14e4:4360] type 00 class 0x028000 [ 3.525748] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit] [ 3.525849] pci 0001:01:00.0: supports D1 D2 [ 3.526014] PCI: bus1: Fast back to back transfers disabled [ 3.531588] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.531607] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01 [ 3.531766] pci 0001:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff] [ 3.538547] pci 0001:01:00.0: BAR 0: assigned [mem 0x40000000-0x40007fff 64bit] [ 3.545829] pci 0001:00:00.0: PCI bridge to [bus 01] [ 3.550785] pci 0001:00:00.0: bridge window [mem 0x40000000-0x400fffff] [ 3.557703] pci_host_bcm5301x bcma0:9: initializing PCIe controller [ 3.948375] pci_host_bcm5301x bcma0:9: link: DOWN [ 3.954164] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds, Software Timer) [ 3.963126] bcma: bus0: Bus registered [ 3.966995] bcma-pci-bridge 0000:01:00.0: enabling device (0140 -> 0142) [ 3.973746] bcma: bus1: Found chip with id 43217, rev 0x00 and package 0x08 [ 3.980719] bcma: bus1: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x27, class 0x0) [ 3.989233] bcma: bus1: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0) [ 3.997837] bcma: bus1: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x14, class 0x0) [ 4.005892] bcma: bus1: Found rev 12 PMU (capabilities 0x108C260C) [ 4.117751] bcma: bus1: Using SPROM revision 8 provided by platform. [ 4.117774] bcma: bus1: PMU resource config unknown or not needed for device 0xA8D1 [ 4.119788] bcma: bus1: Workarounds unknown or not needed for device 0xA8D1 [ 4.198601] bcma: bus1: Bus registered [ 4.202413] bcma-pci-bridge 0001:01:00.0: enabling device (0140 -> 0142) [ 4.209141] bcma: bus2: Found chip with id 0x4352, rev 0x03 and package 0x01 [ 4.216186] bcma: bus2: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2B, class 0x0) [ 4.224698] bcma: bus2: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x2A, class 0x0) [ 4.233300] bcma: bus2: Core 2 found: ARM CR4 (manuf 0x4BF, id 0x83E, rev 0x02, class 0x0) [ 4.241559] bcma: bus2: Core 3 found: PCIe Gen2 (manuf 0x4BF, id 0x83C, rev 0x01, class 0x0) [ 4.249985] bcma: bus2: Core 4 found: USB 2.0 Device (manuf 0x4BF, id 0x81A, rev 0x11, class 0x0) [ 4.258880] bcma: bus2: Found rev 17 PMU (capabilities 0x10A22B11) [ 4.258890] bcma: bus2: SPROM offset 0x800 [ 4.290336] bcma: bus2: Invalid SPROM read from the PCIe card, trying to use fallback SPROM [ 4.318662] bcma: bus2: Using SPROM revision 11 provided by platform. [ 4.318682] bcma: bus2: PMU resource config unknown or not needed for device 0x4352 [ 4.320684] bcma: bus2: Workarounds unknown or not needed for device 0x4352 [ 4.320696] bcma: bus2: Switched to core: 0x83C [ 4.321030] bcma: bus2: Bus registered [ 4.325052] TCP: cubic registered [ 4.328393] NET: Registered protocol family 17 [ 4.332903] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 4.345489] Bridge firewalling registered [ 4.349492] 8021q: 802.1Q VLAN Support v1.8 [ 4.353718] Registering SWP/SWPB emulation handler [ 4.360698] UBI: auto-attach mtd4 [ 4.364012] UBI: attaching mtd4 to ubi0 [ 5.929388] UBI: scanning is finished [ 5.950581] UBI: attached mtd4 (name "ubi", size 122 MiB) to ubi0 [ 5.956663] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 5.963441] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 5.970122] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 5.976965] UBI: good PEBs: 976, bad PEBs: 0, corrupted PEBs: 0 [ 5.982865] UBI: user volume: 2, internal volumes: 1, max. volumes count: 128 [ 5.989976] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 588730206 [ 5.998900] UBI: available PEBs: 0, total reserved PEBs: 976, PEBs reserved for bad PEB handling: 20 [ 6.008042] UBI: background thread "ubi_bgt0d" started, PID 255 [ 6.015061] UBI: ubiblock0_0 created from ubi0:0(rootfs) [ 6.020381] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem [ 6.033210] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. [ 6.040622] Freeing unused kernel memory: 180K (c033f000 - c036c000) [ 6.716156] init: Console is alive [ 6.719803] init: - watchdog - [ 6.723292] External imprecise Data abort at addr=0xb6fdc068, fsr=0x1c06 ignored. [ 7.331095] usbcore: registered new interface driver usbfs [ 7.336632] usbcore: registered new interface driver hub [ 7.342067] usbcore: registered new device driver usb [ 7.740569] init: - preinit - [ 9.768412] eth0: Link is Up - 1Gbps/Full - flow control off [ 11.043757] UBIFS: background thread "ubifs_bgt0_1" started, PID 329 [ 11.129871] UBIFS: recovery needed [ 11.316779] UBIFS: recovery completed [ 11.320562] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" [ 11.326976] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 11.336110] UBIFS: FS size: 116436992 bytes (111 MiB, 917 LEBs), journal size 5840896 bytes (5 MiB, 46 LEBs) [ 11.346050] UBIFS: reserved for root: 4952683 bytes (4836 KiB) [ 11.351893] UBIFS: media format: w4/r0 (latest is w4/r0), UUID EE6DAA18-057B-4111-8054-11E23FEC396E, small LPT model [ 11.366517] mount_root: switching to jffs2 overlay [ 11.391761] procd: - early - [ 11.394754] procd: - watchdog - [ 12.060656] procd: - ubus - [ 13.089284] procd: - init - [ 17.581929] NET: Registered protocol family 10 [ 17.590114] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 17.601512] Loading modules backported from Linux version master-2015-03-09-0-g141f155 [ 17.609404] Backport generated by backports.git backports-20150129-0-gdd4a670 [ 17.618143] ip_tables: (C) 2000-2006 Netfilter Core Team [ 17.627689] nf_conntrack version 0.5.0 (4002 buckets, 16008 max) [ 17.700192] xt_time: kernel timezone is -0000 [ 17.711481] cfg80211: Calling CRDA to update world regulatory domain [ 17.718218] cfg80211: World regulatory domain updated: [ 17.723394] cfg80211: DFS Master region: unset [ 17.727731] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 17.737513] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 17.745502] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 17.753475] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 17.761448] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 17.769414] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 17.778850] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 17.786902] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 17.794867] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 17.818258] PPP generic driver version 2.4.2 [ 17.823698] NET: Registered protocol family 24 [ 17.841579] b43-phy0: Broadcom 43217 WLAN found (core revision 30) [ 17.847759] bcma: bus1: Switched to core: 0x812 [ 17.858431] b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 17 [ 17.864597] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2057, Revision 14, Version 1 [ 17.888519] b43-phy1: Broadcom 4352 WLAN found (core revision 42) [ 17.894591] bcma: bus2: Switched to core: 0x812 [ 17.925185] bcma: bus2: HT force timeout [ 18.040698] bcma: bus2: PLL enable timeout [ 18.044785] b43-phy1 ERROR: FOUND UNSUPPORTED PHY (Analog 12, Type 11 (AC), Revision 1) [ 18.052797] b43: probe of bcma2:1 failed with error -95 [ 18.058103] Broadcom 43xx driver loaded [ Features: PNL ] [ 18.068081] usbcore: registered new interface driver brcmfmac [ 18.104308] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 21.704377] device eth0.1 entered promiscuous mode [ 21.709185] device eth0 entered promiscuous mode [ 21.721094] br-lan: port 1(eth0.1) entered forwarding state [ 21.726705] br-lan: port 1(eth0.1) entered forwarding state [ 21.768673] eth0: Link is Up - 1Gbps/Full - flow control off [ 23.720339] br-lan: port 1(eth0.1) entered forwarding state [ 326.628171] br-lan: port 1(eth0.1) entered disabled state [ 326.641061] device eth0.1 left promiscuous mode [ 326.645599] device eth0 left promiscuous mode [ 326.650160] br-lan: port 1(eth0.1) entered disabled state [ 326.671982] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready [ 326.777307] device eth0.1 entered promiscuous mode [ 326.782203] device eth0 entered promiscuous mode [ 326.790145] br-lan: port 1(eth0.1) entered forwarding state [ 326.795885] br-lan: port 1(eth0.1) entered forwarding state [ 328.790417] br-lan: port 1(eth0.1) entered forwarding state


Tags

toh/asus/rt-ac56u.txt · Last modified: 2016/01/24 17:24 by tmomas