User Tools

Site Tools


toh:asus:rt-n10u

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
toh:asus:rt-n10u [2017/11/27 06:26]
L117 [Flash Layout]
toh:asus:rt-n10u [2017/11/27 07:30] (current)
tmomas Moved TFTP install to the correct place; non working fcc link removed
Line 2: Line 2:
 Wireless-N150 Router with USB port. Wireless-N150 Router with USB port.
 RT-N10U B seems the same router but just black cover. RT-N10U B seems the same router but just black cover.
-http://​www.asus.com/​Networks/​Wireless_Routers/​RTN10U/​+[[http://​www.asus.com/​Networks/​Wireless_Routers/​RTN10U/​]]
  
 ===== Supported Versions ===== ===== Supported Versions =====
Line 9: Line 9:
  
 <WRAP box center 80%> {{:​meta:​icons:​tango:​48px-emblem-question.svg.png }} If you can **confirm** that OpenWrt is running on this device (i.e. you or someone else has **tested** it), please update the data accordingly. -> Click //View/Edit data// <WRAP box center 80%> {{:​meta:​icons:​tango:​48px-emblem-question.svg.png }} If you can **confirm** that OpenWrt is running on this device (i.e. you or someone else has **tested** it), please update the data accordingly. -> Click //View/Edit data//
-/* Special style definitions for the various Tables of Hardware. ​           */ 
-{{page>​meta:​infobox:​tohstyles&​noheader&​nofooter&​noeditbtn&​inline&​indent&​link}} 
 ---- datatable ---- ---- datatable ----
 cols    : Model, Versions, Supported Since Rev_url, Supported Since Rel, Supported Current Rel, Device Techdata_pageid cols    : Model, Versions, Supported Since Rev_url, Supported Since Rel, Supported Current Rel, Device Techdata_pageid
Line 34: Line 32:
  
 ==== Flash Layout ==== ==== Flash Layout ====
- 
-== TFTP method == 
-1. Install tftp (E.g. on Debian and derivatives it can be done with **apt install tftp**). 
- 
-2. Unplug all Ethernet cables, except one that connected to machine with tftp installed. 
- 
-3. Configure (on machine with tftp) network as follows: IP 192.168.1.15 / NETMASK 255.255.255.0 / GATEWAY 192.168.1.1 
- 
-4. Power off router by either unpressing power button or plugging out power cable. 
- 
-5. Push and hold reset button (Reset, not WPS one!) 
- 
-6. While holding reset button, power on router and wait until power led will start to blink slowly. Then release reset button. 
- 
-7. Launch tftp and issue following commands: 
- 
-connect 192.168.1.1 
- 
-mode binary 
- 
-put name_of_rom.trx 
- 
-quit 
- 
-8. Wait 5 minutes (Five! Not 2, not 3, not 4 and 30 seconds) 
- 
-9. Power off router, wait about 15 seconds, then power on. It will take a little time to boot OpenWRT, but then you should be done. 
  
 You can also check out [[doc:​techref:​Flash.Layout]] article. It contains an example and a couple of explanations. You can also check out [[doc:​techref:​Flash.Layout]] article. It contains an example and a couple of explanations.
Line 78: Line 49:
 ==== OEM installation using the TFTP method ==== ==== OEM installation using the TFTP method ====
  
-If you want to upgrade using TFTP you follow these steps (as an alternative ​to the above install process.+  - Install tftp (E.g. on Debian and derivatives it can be done with **apt install tftp**). 
 +  - Unplug all Ethernet cables, except one that connected ​to machine with tftp installed. 
 +  - Configure ​(on machine with tftp) network ​as follows: IP 192.168.1.15 / NETMASK 255.255.255.0 / GATEWAY 192.168.1.1 
 +  - Power off router by either unpressing power button or plugging out power cable. 
 +  - Push and hold reset button (Reset, not WPS one!) 
 +  - While holding reset button, power on router and wait until power led will start to blink slowly. Then release reset button. 
 +  - Launch tftp and issue following commands:\\ <​code>​ 
 +connect 192.168.1.1 
 + 
 +mode binary 
 + 
 +put name_of_rom.trx 
 + 
 +quit 
 +</​code>​ 
 +  - Wait 5 minutes (Five! Not 2, not 3, not 4 and 30 seconds) 
 +  - Power off router, wait about 15 seconds, then power on. It will take a little time to boot OpenWrt, but then you should be done.
  
 ==== Upgrading OpenWrt ==== ==== Upgrading OpenWrt ====
Line 670: Line 657:
 ===== Notes ===== ===== Notes =====
  
-https://​fjallfoss.fcc.gov/​oetcf/​eas/​reports/​ViewExhibitReport.cfm?​mode=Exhibits&​RequestTimeout=500&​calledFromFrame=N&​application_id=415934&​fcc_id=%27MSQRTN10U%27 +Support Forum thread: ​[[https://​forum.openwrt.org/​viewtopic.php?​id=37414]]
- +
-Support Forum thread: https://​forum.openwrt.org/​viewtopic.php?​id=37414+
  
 ASUS released the source code for this and other models: ​ ASUS released the source code for this and other models: ​
-https://​www.asus.com/​Networking/​RTN10U_B/​HelpDesk_Download/​ +  * [[https://​www.asus.com/​Networking/​RTN10U_B/​HelpDesk_Download/​]] 
-http://​dlcdnet.asus.com/​pub/​ASUS/​wireless/​RT-N10U_B1/​GPL_RT_N10U_B1_30043763754.zip+  * [[http://​dlcdnet.asus.com/​pub/​ASUS/​wireless/​RT-N10U_B1/​GPL_RT_N10U_B1_30043763754.zip]]
  
 ===== Tags ===== ===== Tags =====
 [[meta:​tags|How to add tags]] [[meta:​tags|How to add tags]]
 {{tag> FastEthernet 5Port 2NIC USB  ath9k DetachableAntenna 32RAM 8Flash MIPS MIPS32 34K}} {{tag> FastEthernet 5Port 2NIC USB  ath9k DetachableAntenna 32RAM 8Flash MIPS MIPS32 34K}}
toh/asus/rt-n10u.txt · Last modified: 2017/11/27 07:30 by tmomas