User Tools

Site Tools


toh:asus:rt-n12d1

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
toh:asus:rt-n12d1 [2016/11/25 16:37]
drben [Basic configuration]
toh:asus:rt-n12d1 [2017/11/14 07:47] (current)
beetl
Line 201: Line 201:
 The pins assignment should be: The pins assignment should be:
 ^ Pin ^ Signal ^ ^ Pin ^ Signal ^
-| 1 | TxD +| 1 | RxD 
-| 2 | RxD |+| 2 | TxD |
 | 3 | GND | | 3 | GND |
 | 4 | VCC | | 4 | VCC |
  
-The settings are: 16550 :?: bauds, :?: bits, :?: parity, :?: stop bit+The settings are: 16550 :?: 115200 ​bauds, :?: bits, :?: parity, :?: stop bit
 ==== JTAG ==== ==== JTAG ====
 -> [[doc:​hardware:​port.jtag]] general information about the JTAG port, JTAG cable, etc. -> [[doc:​hardware:​port.jtag]] general information about the JTAG port, JTAG cable, etc.
toh/asus/rt-n12d1.txt · Last modified: 2017/11/14 07:47 by beetl