User Tools

Site Tools


toh:asus:wl500b

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

toh:asus:wl500b [2012/12/27 14:53] (current)
Line 1: Line 1:
 +====== ASUS WL-500b ======
 +This is an 802.11b version of [[wl500g|Asus WL-500g]]. It has got the same board inside, only miniPCI wireless card is different.
 +
 +===== Available versions =====
 +^ Version/​Model ^ S/N ^ OpenWrt Version Supported ^ Model Specific Notes ^
 +| v? | 46IGE16103 | Kamikaze 8.09.2 , Backfire 10.03.1 | |
 +| v1 | upto 48IGE17770 (?) | Whiterussian 0.9 | WiFi miniPCI Broadcom WL-120b (BCM4301) |
 +| v2 | 48IGE17771 and above | ? | WiFi miniPCI Ralink WL-127 (Ralink RT2400) |
 +
 +===== Installation =====
 +Wireless interface worked only in White Russian 0.9 and older for me (and only in AP mode or client mode with WEP encryption). If you want to use this device in client mode with WPA encryption, you may replace your wireless card with something better (WL-120g, Atheros CM9, etc.).
 +
 +===== Experience with 46IGE16103 =====
 +Working versions:
 +  * Kamikaze 8.09.2 (r18961) - brcm2.4
 +  * Backfire 10.03.1 - brcm2.4, brcm47xx(not recommended,​ see below)
 +
 +Small bits:
 +  * SSH is refused for 60 seconds after ping is available. You have to be patient.
 +  * USB soundcard works on all versions.
 +
 +
 +
 +==== Backfire 10.03.1 brcm47xx issues ====
 +  * Everything is slower. Reply to ping after power-on is 63 seconds (for brcm2.4 it is 30 seconds). SSH connection takes 5-6 seconds instead of 1-3 seconds.
 +  * Installing packages hangs sometimes.
 +
 +==== Root on external USB storage ====
 +Reason for having root on external drive is that you want to install more packages than fit into 1.5mb of internal memory.
 +
 +  * For Backfire'​s 10.03+ : use the [[doc/​howto/​extroot#​openwrt.backfire.10.03|extroot ability]] as it is easy to setup (just copy data to usb, update /​etc/​config/​fstab and reboot).
 +  * For rest use the "​Changing mini_fo'​s storage directory (/jffs on external media)"​ [[https://​forum.openwrt.org/​viewtopic.php?​id=10816&​p=1|[howto] Changing mini_fo'​s storage directory (/jffs)]]
 +
 +To check if root is mounted from external disk, check it for space: //df -h /overlay// or //df -h /jffs//. Do not install some of important usb packages like '​kmod-usb-core'​ when root is on external usb. That will probably disconnect the usb with root. So reboot without usb, install packages on internal root and copy updated root to usb root afterwards.
 +
  
toh/asus/wl500b.txt · Last modified: 2012/12/27 14:53 (external edit)