User Tools

Site Tools



This shows you the differences between two versions of the page.

Link to this comparison view

toh:asus:wl600g [2013/03/22 00:52]
toh:asus:wl600g [2014/02/18 00:17] (current)
Line 4: Line 4:
   * Backfire (10.03.1):​\\ [[http://​​backfire/​10.03.1/​brcm63xx/​openwrt-96348GW-generic-squashfs-cfe.bin|openwrt-96348GW-generic-squashfs-cfe.bin]]   * Backfire (10.03.1):​\\ [[http://​​backfire/​10.03.1/​brcm63xx/​openwrt-96348GW-generic-squashfs-cfe.bin|openwrt-96348GW-generic-squashfs-cfe.bin]]
-  * Attitude Adjustment (12.09):\\ [[http://​​attitude_adjustment/​12.09-rc1/​brcm63xx/​generic/​openwrt-96348GW-generic-squashfs-cfe.bin|openwrt-96348GW-generic-squashfs-cfe.bin]]+  * Attitude Adjustment (12.09):\\ [[http://​​attitude_adjustment/​12.09/​brcm63xx/​generic/​openwrt-96348GW-generic-squashfs-cfe.bin|openwrt-96348GW-generic-squashfs-cfe.bin]]
   * Trunk:\\ [[http://​​snapshots/​trunk/​brcm63xx/​openwrt-96348GW-generic-squashfs-cfe.bin|openwrt-96348GW-generic-squashfs-cfe.bin]]   * Trunk:\\ [[http://​​snapshots/​trunk/​brcm63xx/​openwrt-96348GW-generic-squashfs-cfe.bin|openwrt-96348GW-generic-squashfs-cfe.bin]]
 +**NOTE:** some people reported that only backfire (10.03.1) works; Attitude Adjustment (12.09) and trunk boot but the device does not respond in any way (it is not bricked, the bootloader works, and firmware can be flashed over TFTP as described below). See bug https://​​ticket/​12389 - it looks like it's related to usb and can be avoided by disabling uhci in custom firmware.
 ===== Hardware ===== ===== Hardware =====
Line 88: Line 90:
 [[http://​​danitool/​linux/​|]] [[http://​​danitool/​linux/​|]]
 +===== Flashing over TFTP / debricking =====
 +(from [[http://​​wl-600g/​|Hacking ASUS WL600g router]], and the [[http://​​wl-600g/​debrick.htm|debrick]] subpage in particular)
 +To upload firmware over TFTP, boot into rescue mode by turning the device on while holding the RESET button. The power LED will flash slowly. Connect with cable to the router (any LAN socket), assign static IP to your computer in the range -- the wl600g itself is The device runs TFTP server, put the firmware on it:
 +<​code>​ $ tftp
 +tftp> binary
 +tftp> connect
 +tftp> verbose
 +Verbose mode on.
 +tftp> put WL-600g_1.0.3.6.A.trx
 +putting WL-600g_1.0.3.6.A.trx to​WL-600g_1.0.3.6.A.trx [octet]
 +Sent 3228760 bytes in 4.2 seconds [6150019 bits/sec]
 +tftp> q
 +The device does NOT seem to reboot automatically after flashing new firmware - wait a few minutes and do it manually.
 ===== Interesting threads ===== ===== Interesting threads =====
toh/asus/wl600g.1363909977.txt.bz2 · Last modified: 2013/03/22 00:52 (external edit)