|Version/Model||Launch Date||S/N||OpenWrt Version Supported||Model Specific Notes|
|v1||2010-01||-||?||there is some support available r38327|
|MIPS@500MHz||128MiB||256KiB serial+512MiB NAND||4 x 1||Yes||Yes||?|
This device is NOT SUPPORTED by OpenWrt.
First let's have a quick view at the Flash Layout with the stock firmware and after OpenWrt has been installed. When you later want to understand, what mtd/sysupgrade do, have a second look here:
After flashing, proceed with Basic configuration.
Set up your Internet connection, configure wireless, configure USB port, etc.
How to connect to Serial Port
How to connect to JTAG interface, and how to reflash the device with JTAG tools
See port.jtag for more JTAG details.
FriXtender - http://frixtender.de/
For some Help with the Tags, please have a look here: tags