Table of Contents
AVM FRITZ!Box Fon WLAN 7390
Supported Versions
| Version/Model | Launch Date | S/N | OpenWrt Version Supported | Model Specific Notes |
|---|---|---|---|---|
| v1 | 2009-01 | - | no | - |
Hardware Highlights
| CPU | Ram | Flash | Network | USB | Serial | JTag |
|---|---|---|---|---|---|---|
| MIPS@500MHz | 128MiB | 16MiB+512MiB | 4 x 1 | Yes | Yes | ? |
Installation
NOT SUPPORTED by OpenWrt But check out http://freetz.org/
- obtain.firmware You should download a stable image with factory and SquashFS in the Name.
- generic.flashing Now write this firmware-file onto the flash-chip of your device
Flash Layout
First let's have a quick view at the Flash Layout with the stock firmware and after OpenWrt has been installed. When you later want to understand, what mtd/sysupgrade do, have a second look here:
Basic configuration
After flashing, proceed with Basic configuration.
Set up your Internet connection, configure wireless, configure USB port, etc.
Hardware
Info
- SoC: Ikanos Fusiv Vx180
| Architecture: MIPS |
| Vendor: Ikanos |
| Bootloader: |
| System-On-Chip: Ikanos Fusiv Vx180 |
| CPU MIPS 24KEc V?.? 500 Mhz |
| xDSL: |
| VoIP: |
| Flash-Chip: |
| Flash size: 16384 KiB + 512MiB |
| RAM: 128 MiB |
| Wireless: |
| Ethernet: |
| USB: Yes 2 x 2.0 |
| Serial: Yes |
| JTAG: Yes |
Photos
Opening the case
Serial
How to connect to Serial Port
JTAG
How to connect to JTAG interface, and how to reflash the device with JTAG tools
See port.jtag for more JTAG details.
Bootloader Mods
Hardware mods
Other Info
- Free DSP Compiler Available http://open.neurostechnology.com/node/1020
- AVM Wiki (de) http://www.wehavemorefun.de/fritzbox/Main_Page
Tags
For some Help with the Tags, please have a look here: tags
toh/avm/fritz.box.wlan.7390.txt · Last modified: 2011/03/11 18:48 by orca