User Tools

Site Tools


toh:belkin:f7d4401

Belkin F7D4401

CPU Ram Flash Network USB Serial JTag
BCM4716 rev 1 @ 453 MHz 64MiB 8MiB 4 x 1 Yes Yes Yes

Hardware Info

Architecture: MIPS
Vendor: Broadcom
Bootloader: CFE
System-On-Chip: BCM4718
CPU Speed: 453 Mhz
Flash size: 8 MiB
RAM: 64 MiB
Wireless: BCM4329 and BCMa8d8
Ethernet: BCM47xx GBit, BCM53115 Switch
USB: 2 x USB 2.0
Serial: Yes
JTAG: Yes
ADSL Modem: Yes

Supported Versions

Version/Model S/N OpenWrt Version Supported Model Specific Notes
v1 ? WIP R36241 Patches @ https://github.com/gmtii/openwrt-f7d4401/blob/master/f7d4401-r36241.patch adapted from http://manojpi.blogspot.com

Bootlogs

OEM bootlog

Linux version 2.6.22 (violet@localhost.localdomain) (gcc version 4.1.2) #72 Thu Jan 13 11:23:05 CST 2011 CPU revision is: 00019740 Found chip type AI (0x19a14716) Chipc: rev 31, caps 0x184807c9, chipst 0x8800 pmurev 5, pmucaps 0x11242c05 No PLL init done for chip 4716 rev 1 pmurev 5 si_kattach done. ccrev = 31, wd_msticks = 32 Determined physical RAM map: memory: 04000000 @ 00000000 (usable) On node 0 totalpages: 16384 Normal zone: 128 pages used for memmap Normal zone: 0 pages reserved Normal zone: 16256 pages, LIFO batch:3 Built 1 zonelists. Total pages: 16256 Kernel command line: root=/dev/mtdblock2 console=ttyS0,115200 init=/sbin/preinit Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, linesize 32 bytes. Synthesized TLB refill handler (20 instructions). Synthesized TLB load handler fastpath (32 instructions). Synthesized TLB store handler fastpath (32 instructions). Synthesized TLB modify handler fastpath (31 instructions). PID hash table entries: 256 (order: 8, 1024 bytes) CPU: BCM4716 rev 1 at 453 MHz Using 226.500 MHz high precision timer. Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 60652k/65536k available (2817k kernel code, 4824k reserved, 1131k data, 132k init, 0k highmem) Calibrating delay loop... 225.28 BogoMIPS (lpj=112640) Mount-cache hash table entries: 512 NET: Registered protocol family 16 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using membase 8000000 PCI: Initializing host PCI: Reset RC PCI: Fixing up bus 0 PCI: Fixing up bridge PCI: Setting latency timer of device 0000:01:00.0 to 64 PCI: Fixing up bridge PCI: Setting latency timer of device 0000:01:00.1 to 64 PCI: Enabling device 0000:01:00.1 (0004 -> 0006) PCI: Fixing up bus 1 Time: MIPS clocksource has been installed. NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered gpio_init 479 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher fuse init (API version 7.8) io scheduler noop registered (default) Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A loop: module loaded PPP generic driver version 2.4.2 PPP MPPE Compression module registered NET: Registered protocol family 24 Physically mapped flash: Found 1 x16 devices at 0x0 in 8-bit bank Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 Amd/Fujitsu Extended Query Table at 0x0040 number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Flash device: 0x800000 at 0x1c000000 Physically mapped flash: squash filesystem with lzma found at block 1763 Creating 4 MTD partitions on "Physically mapped flash": 0x00000000-0x00030000 : "boot" 0x00030000-0x007f0000 : "linux" 0x001b8f78-0x007f0000 : "rootfs" 0x007f0000-0x00800000 : "nvram" Found a 0MB serial flash sflash: found no supported devices usbmon: debugfs is not available GACT probability on Mirror/redirect action on u32 classifier input device check on Actions configured Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (512 buckets, 4096 max) ctnetlink v0.93: registering with nfnetlink. ip_tables: (C) 2000-2006 Netfilter Core Team ClusterIP Version 0.8 loaded successfully arp_tables: (C) 2002 David S. Miller TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Ebtables v2.0 registered 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller VFS: Mounted root (squashfs filesystem) readonly. Freeing unused kernel memory: 132k freed Warning: unable to open an initial console. Algorithmics/MIPS FPU Emulator v1.5 emf: module license 'Proprietary' taints kernel. et_module_init: msglevel set to 0x1 PCI: Setting latency timer of device 0000:00:02.0 to 64 si_doattach: incoming bus is PCI but it's a lie, switching to SI devid:0x4715 Found chip type AI (0x19a14716) Chipc: rev 31, caps 0x184807c9, chipst 0x8800 pmurev 5, pmucaps 0x11242c05 No PLL init done for chip 4716 rev 1 pmurev 5 eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.128.0 wl_module_init: msglevel set to 0x1 wl_module_init: msglevel2 set to 0x0 PCI: Setting latency timer of device 0000:00:01.0 to 64 si_doattach: incoming bus is PCI but it's a lie, switching to SI devid:0x4329 Found chip type AI (0x19a14716) Chipc: rev 31, caps 0x184807c9, chipst 0x8800 pmurev 5, pmucaps 0x11242c05 No PLL init done for chip 4716 rev 1 pmurev 5 Overriding device id = 0x4329 wlc_bmac_attach, deviceid 0x4329 nbands 1 eth1: Broadcom BCM4329 802.11 Wireless Controller 5.10.128.0 (Compiled in . at 11:24:59 on Jan 13 2011) PCI: Enabling device 0000:01:01.0 (0000 -> 0002) PCI: Setting latency timer of device 0000:01:01.0 to 64 Found chip type AI (0x1381a8d8) Chipc: rev 34, caps 0x58500000, chipst 0x20081 pmurev 6, pmucaps 0x108c2606 Neither SPROM nor OTP has valid image Applying 43224B0+ WARs Overriding device id = 0x432d wlc_bmac_attach, deviceid 0x432d nbands 1 eth2: Broadcom BCMa8d8 802.11 Wireless Controller 5.10.128.0 (Compiled in . at 11:24:59 on Jan 13 2011) br0: starting userspace STP failed, staring kernel STP vlan2: add 33:33:00:00:00:01 mcast address to master interface vlan2: add 01:00:5e:00:00:01 mcast address to master interface vlan2: add 33:33:ff:e2:cd:ef mcast address to master interface vlan2: dev_set_promiscuity(master, 1) device eth0 entered promiscuous mode device vlan2 entered promiscuous mode si_pmu_fast_pwrup_delay: chip 4716 rev 1 delay 15000 wl0: wlc_switch_ab_11n ERROR 0 restoring amsdu to 0 wl0: wlc_switch_ab_11n ERROR 0 restoring amsdu to 0 wl0: wlc_set_rate_override: 5G band not available wl0: wlc_set_rate_override: 5G band not available si_pmu_fast_pwrup_delay: chip 4716 rev 1 delay 15000 device eth1 entered promiscuous mode si_pmu_fast_pwrup_delay: chip 43224 rev 1 delay 7000 wl1: wlc_switch_ab_11n ERROR 0 restoring amsdu to 0 wl1: wlc_switch_ab_11n ERROR 0 restoring amsdu to 0 wl1: wlc_set_rate_override: 2.4G band not available wl1: wlc_set_rate_override: 2.4G band not available si_pmu_fast_pwrup_delay: chip 43224 rev 1 delay 7000 device eth2 entered promiscuous mode br0: port 3(eth2) entering listening state br0: port 2(eth1) entering listening state br0: port 1(vlan2) entering listening state br0: port 3(eth2) entering learning state br0: port 2(eth1) entering learning state br0: port 1(vlan2) entering learning state br0: topology change detected, propagating br0: port 3(eth2) entering forwarding state br0: topology change detected, propagating br0: port 2(eth1) entering forwarding state br0: topology change detected, propagating br0: port 1(vlan2) entering forwarding state br1: starting userspace STP failed, staring kernel STP vlan2: add 33:33:00:00:00:02 mcast address to master interface vlan2: add 33:33:ff:00:00:00 mcast address to master interface ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver PCI: Setting latency timer of device 0000:00:04.0 to 64 ohci_hcd 0000:00:04.0: OHCI Host Controller ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:04.0: irq 5, io mem 0x18009000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PCI: Setting latency timer of device 0000:00:04.1 to 64 ehci_hcd 0000:00:04.1: EHCI Host Controller ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:04.1: irq 5, io mem 0x18004000 ehci_hcd 0000:00:04.1: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected vlan1: Setting MAC address to 94 44 52 e2 cd f0. vlan1: add 33:33:00:00:00:02 mcast address to master interface vlan1: add 33:33:00:00:00:01 mcast address to master interface vlan1: add 01:00:5e:00:00:01 mcast address to master interface vlan1: add 33:33:ff:e2:cd:f0 mcast address to master interface vlan1: add 33:33:ff:00:00:00 mcast address to master interface sxuptp: sxuptp_keepalive_thread start USB port mode selector has been enabled usbcore: registered new interface driver sxuptp_driver jcpcore: start jcp_command_register: new command registered GET USB_DEVICE_LIST jcp_command_register: new command registered EXEC SCANNER CONNECT jcp_command_register: new command registered EXEC SCANNER DISCONNECT Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. wl0: wl_link_up: link up wl1: wl_link_up: link up vlan1: dev_set_allmulti(master, 1)

OpenWrt bootlog

[ 0.000000] Linux version 3.6.11 (gmtii@dell) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2012.12 r36194) ) #4 Sun Apr 7 13:37:37 CEST 2013 [ 0.000000] CPU revision is: 00019740 (MIPS 74Kc) [ 0.000000] bcm47xx: using bcma bus [ 0.000000] bcma: bus0: Found chip with id 0x4716, rev 0x01 and package 0x0A [ 0.000000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x1F, class 0x0) [ 0.000000] bcma: bus0: Core 3 found: MIPS 74K (manuf 0x4A7, id 0x82C, rev 0x01, class 0x0) [ 0.000000] bcma: bus0: Found rev 5 PMU (capabilities 0x11242C05) [ 0.000000] bcma: bus0: Found parallel flash [ 0.000000] bcma: bus0: Early bus registered [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 04000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x03ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x03ffffff] [ 0.000000] On node 0 totalpages: 16384 [ 0.000000] free_area_init_node: node 0, pgdat 802de970, node_mem_map 81000000 [ 0.000000] Normal zone: 128 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 16256 pages, LIFO batch:3 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200 [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 61572k/65536k available (2416k kernel code, 3964k reserved, 519k data, 164k init, 0k highmem) [ 0.000000] NR_IRQS:128 [ 0.032000] Calibrating delay loop... 225.02 BogoMIPS (lpj=450048) [ 0.036000] pid_max: default: 32768 minimum: 301 [ 0.036000] Mount-cache hash table entries: 512 [ 0.036000] NET: Registered protocol family 16 [ 0.056000] bio: create slab at 0 [ 0.060000] Switching to clocksource MIPS [ 0.068000] NET: Registered protocol family 2 [ 0.068000] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 0.068000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [ 0.068000] TCP: Hash tables configured (established 2048 bind 2048) [ 0.068000] TCP: reno registered [ 0.068000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.068000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.068000] NET: Registered protocol family 1 [ 0.068000] PCI: CLS 0 bytes, default 32 [ 0.072000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x11, class 0x0) [ 0.072000] bcma: bus0: Core 2 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x00, class 0x0) [ 0.072000] bcma: bus0: Core 4 found: USB 2.0 Host (manuf 0x4BF, id 0x819, rev 0x04, class 0x0) [ 0.072000] bcma: bus0: Core 5 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0E, class 0x0) [ 0.072000] bcma: bus0: Core 6 found: DDR1/DDR2 Memory Controller (manuf 0x4BF, id 0x82E, rev 0x01, class 0x0) [ 0.072000] bcma: bus0: Core 7 found: Internal Memory (manuf 0x4BF, id 0x80E, rev 0x07, class 0x0) [ 0.072000] bcma: bus0: Core 8 found: I2S (manuf 0x4BF, id 0x834, rev 0x00, class 0x0) [ 0.316000] bcma: bus0: Using SPROM revision 8 provided by platform. [ 0.316000] bcma: bus0: PMU resource config unknown or not needed for device 0x4716 [ 0.320000] bcma: bus0: Workarounds unknown or not needed for device 0x4716 [ 0.320000] bcma: bus0: Initializing MIPS core... [ 0.320000] bcma: bus0: Moved i2s interrupt to oob line 7 instead of 8 [ 0.320000] bcma: bus0: set_irq: core 0x0812, irq 3 => 3 [ 0.320000] bcma: bus0: set_irq: core 0x082d, irq 4 => 4 [ 0.320000] bcma: bus0: set_irq: core 0x0819, irq 5 => 5 [ 0.320000] bcma: bus0: set_irq: core 0x0820, irq 6 => 6 [ 0.320000] bcma: bus0: set_irq: core 0x0800, irq 2 => 2 [ 0.320000] bcma: bus0: set_irq: core 0x0834, irq 0 => 2 [ 0.320000] bcma: bus0: IRQ reconfiguration done [ 0.320000] bcma: core 0x0800, irq : 2(S)* 3 4 5 6 D I [ 0.320000] bcma: core 0x082c, irq : 2(S) 3 4 5 6 D I* [ 0.320000] bcma: core 0x0812, irq : 2(S) 3* 4 5 6 D I [ 0.320000] bcma: core 0x082d, irq : 2(S) 3 4* 5 6 D I [ 0.320000] bcma: core 0x0819, irq : 2(S) 3 4 5* 6 D I [ 0.320000] bcma: core 0x0820, irq : 2(S) 3 4 5 6* D I [ 0.320000] bcma: core 0x082e, irq : 2(S) 3 4 5 6 D* I [ 0.320000] bcma: core 0x080e, irq : 2(S) 3 4 5 6 D I* [ 0.320000] bcma: core 0x0834, irq : 2(S)* 3 4 5 6 D I [ 0.320000] bcma: bus0: PCIEcore in host mode found [ 0.496000] PCI host bridge to bus 0000:00 [ 0.496000] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0bffffff] [ 0.496000] pci_bus 0000:00: root bus resource [io 0x0100-0x07ff] [ 0.496000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.496000] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff] [ 0.496000] pci 0000:00:00.0: [14e4:4716] type 00 class 0x060000 [ 0.496000] bcma: PCI: Fixing up bridge 0000:00:00.0 [ 0.496000] bcma: PCI: Fixing up device 0000:00:00.0 [ 0.496000] pci 0000:00:00.0: reg 10: [mem 0x00000000-0x00003fff 64bit] [ 0.496000] pci 0000:00:00.0: reg 18: [mem 0x00000000-0x07ffffff 64bit] [ 0.496000] pci 0000:00:00.0: supports D1 D2 [ 0.496000] pci 0000:00:00.1: [14e4:0000] type 00 class 0x060000 [ 0.496000] bcma: PCI: Fixing up bridge 0000:00:00.1 [ 0.496000] bcma: PCI: Fixing up device 0000:00:00.1 [ 0.496000] pci 0000:00:00.1: reg 10: [mem 0x00000000-0x00003fff 64bit] [ 0.496000] pci 0000:00:00.1: reg 18: [mem 0x00000000-0x07ffffff 64bit] [ 0.496000] pci 0000:00:00.1: supports D1 D2 [ 0.496000] pci 0000:00:01.0: [14e4:a8d8] type 00 class 0x028000 [ 0.496000] pci 0000:00:01.0: reg 10: [mem 0x00000000-0x00003fff 64bit] [ 0.496000] bcma: PCI: Fixing up addresses 0000:00:01.0 [ 0.496000] pci 0000:00:01.0: BAR 0: assigned [mem 0x08000000-0x08003fff 64bit] [ 0.496000] pci 0000:00:01.0: supports D1 D2 [ 0.496000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 0.500000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002) [ 0.500000] bcma: PCI: Fixing up device 0000:00:01.0 [ 0.500000] bcma: bus1: Found chip with id 0xA8D8, rev 0x01 and package 0x08 [ 0.500000] bcma: bus1: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0) [ 0.500000] bcma: bus1: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0) [ 0.500000] bcma: bus1: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0) [ 0.500000] bcma: bus1: Found rev 6 PMU (capabilities 0x108C2606) [ 0.632000] bcma: bus1: Using SPROM revision 8 provided by platform. [ 0.632000] bcma: bus1: PMU resource config unknown or not needed for device 0xA8D8 [ 0.644000] bcma: bus1: Bus registered [ 0.648000] bcma: bus0: Bus registered [ 0.652000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.652000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.652000] msgmni has been set to 120 [ 0.652000] io scheduler noop registered [ 0.652000] io scheduler deadline registered (default) [ 0.652000] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled [ 0.676000] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 2) is a U6_16550A [ 1.140000] console [ttyS0] enabled [ 1.144000] bcm47xx_pflash: flash init: 0x1c000000 0x02000000 [ 1.152000] Physically mapped flash: Found 1 x16 devices at 0x0 in 8-bit bank. Manufacturer ID 0x00007f Chip ID 0x0000cb [ 1.164000] Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 [ 1.164000] Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 [ 1.164000] Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 [ 1.164000] Amd/Fujitsu Extended Query Table at 0x0040 [ 1.168000] Amd/Fujitsu Extended Query version 1.1. [ 1.172000] number of CFI chips: 1 [ 1.176000] bcm47xx_pflash: Flash device: 0x2000000 at 0x1fc00000 [ 1.184000] bcm47xx_part: Found Belkin_F7D4401 header:cfe [ 1.188000] bcm47xx_part: bootloader size: 196608 [ 1.196000] Found board: "Belkin F7D4401" [ 1.200000] bcm47xx_part: Looking for dual image [ 1.208000] bcm47xx_part: Found Belkin_F7D4401 header:root [ 1.216000] bcm47xx_part: TRX offset : 0 [ 1.656000] bcm47xx_part: Updating TRX offsets and length: [ 1.664000] bcm47xx_part: old trx = [0x0000001c, 0x00000968, 0x000f7c00], len=0x003c1000 crc32=0x15633263 [ 1.672000] bcm47xx_part: new trx = [0x0000001c, 0x00000968, 0x000f7c00], len=0x000f7c00 crc32=0x982c2f94 [ 3.552000] bcm47xx_part: Done [ 3.556000] 4 bcm47xx partitions found on MTD device Physically mapped flash [ 3.560000] Creating 4 MTD partitions on "Physically mapped flash": [ 3.568000] 0x000000000000-0x000000030000 : "cfe" [ 3.576000] 0x000000030000-0x0000007f0000 : "linux" [ 3.584000] 0x000000127c00-0x0000007f0000 : "rootfs" [ 3.588000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only [ 3.604000] mtd: partition "rootfs" set to be root filesystem [ 3.612000] mtd: partition "rootfs_data" created automatically, ofs=3B0000, len=440000 [ 3.620000] 0x0000003b0000-0x0000007f0000 : "rootfs_data" [ 3.628000] 0x0000007f0000-0x000000800000 : "nvram" [ 3.640000] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds) [ 3.648000] TCP: cubic registered [ 3.652000] NET: Registered protocol family 17 [ 3.656000] 8021q: 802.1Q VLAN Support v1.8 [ 3.668000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 3.676000] Freeing unused kernel memory: 164k freed [ 5.652000] diag: kernel found a "Belkin F7D4401" [ 5.656000] diag: Detected 'Belkin PlayMax F7D4401' [ 5.660000] diag: led:power [ 5.664000] diag: led:diag [ 5.668000] diag: led:wlan [ 5.672000] diag: led:wlan_red [ 5.672000] diag: led:led_usb0 [ 5.676000] diag: led:led_usb1 [ 5.868000] bgmac bcma0:1: Found PHY addr: 30 (NOREGS) [ 5.880000] bgmac bcma0:1: Support for Roboswitch not implemented [ 5.912000] bgmac: Broadcom 47xx GBit MAC driver loaded [ 6.120000] roboswitch: Probing device 'eth0' [ 6.208000] roboswitch: found a 53115! at eth0 [ 12.268000] Compat-drivers backport release: compat-drivers-2013-01-21-1 [ 12.272000] Backport based on wireless-testing.git master-2013-02-22 [ 12.280000] compat.git: wireless-testing.git [ 12.324000] cfg80211: Calling CRDA to update world regulatory domain [ 12.328000] cfg80211: World regulatory domain updated: [ 12.336000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 12.344000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.352000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.360000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.368000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.376000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.836000] SCSI subsystem initialized [ 13.068000] usbcore: registered new interface driver usbfs [ 13.072000] usbcore: registered new interface driver hub [ 13.080000] usbcore: registered new device driver usb [ 14.428000] wl: module license 'unspecified' taints kernel. [ 14.436000] Disabling lock debugging due to kernel taint [ 14.572000] wl0: Broadcom BCM4329 802.11 Wireless Controller 5.10.56.27 [ 14.580000] SSB/BCMA glue driver successfully attached [ 15.340000] PPP generic driver version 2.4.2 [ 15.844000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 16.012000] NET: Registered protocol family 24 [ 16.128000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 16.136000] ehci-platform ehci-platform.0: Generic Platform EHCI Controller [ 16.144000] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1 [ 16.152000] ehci-platform ehci-platform.0: irq 5, io mem 0x18004000 [ 16.168000] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00 [ 16.172000] hub 1-0:1.0: USB hub found [ 16.176000] hub 1-0:1.0: 2 ports detected [ 16.308000] nf_conntrack version 0.5.0 (964 buckets, 3856 max) [ 17.092000] usbcore: registered new interface driver cdc_acm [ 17.100000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 17.204000] usbcore: registered new interface driver usbserial [ 17.212000] usbcore: registered new interface driver usbserial_generic [ 17.220000] USB Serial support registered for generic [ 17.224000] usbserial: USB Serial Driver core [ 17.352000] Initializing USB Mass Storage driver... [ 17.360000] usbcore: registered new interface driver usb-storage [ 17.364000] USB Mass Storage support registered. [ 17.584000] usbcore: registered new interface driver cp210x [ 17.588000] USB Serial support registered for cp210x [ 17.704000] usbcore: registered new interface driver pl2303 [ 17.712000] USB Serial support registered for pl2303 [ 17.816000] usbcore: registered new interface driver usbhid [ 17.820000] usbhid: USB HID core driver [ 22.496000] device eth0.1 entered promiscuous mode [ 22.500000] device eth0 entered promiscuous mode [ 22.508000] br-lan: port 1(eth0.1) entered forwarding state [ 22.512000] br-lan: port 1(eth0.1) entered forwarding state [ 24.516000] br-lan: port 1(eth0.1) entered forwarding state [ 33.016000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0 [ 33.032000] jffs2_build_filesystem(): unlocking the mtd device... done. [ 44.244000] usb 1-2: new high-speed USB device number 3 using ehci-platform [ 44.388000] scsi0 : usb-storage 1-2:1.0 [ 45.392000] scsi 0:0:0:0: Direct-Access SanDisk Cruzer 8.02 PQ: 0 ANSI: 0 CCS [ 45.408000] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 33.036000] jffs2_build_filesystem(): erasing all blocks after the end marker... done. [ 69.512000] jffs2: notice: (834) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 de.

toh/belkin/f7d4401.txt · Last modified: 2013/04/17 07:05 (external edit)