User Tools

Site Tools


toh:bt:homehub_v2b:bootlog

OpenRG bootlog

HOME HUB V2B

/ # cat /proc/kmsg <4>[ 0.000000] PORTA2: detected HW revision 7 <4>[ 0.000000] <4>[ 0.000000] Applying Patch for CPU1 IRQ Issue <4>[ 0.000000] memsize=64M <4>[ 0.000000] Reserving memory for CP1 @0xa3f00000 <4>[ 0.000000] memsize=63M <4>[ 0.000000] CPU revision is: 00019641 <4>[ 0.000000] Primary instruction cache 16kB, physically tagged, 4-way, linesize 32 bytes. <4>[ 0.000000] Primary data cache 16kB 4-way, linesize 32 bytes. <4>[ 0.000000] Linux version 2.4.21openrg-rmk1 #4 Thu Apr 2 13:03:40 IDT 2009 <4>[ 0.000000] Determined physical RAM map: <4>[ 0.000000] memory: 00100000 @ 03f00000 (reserved) <4>[ 0.000000] User-defined physical RAM map: <4>[ 0.000000] memory: 03f00000 @ 00000000 (usable) <4>[ 0.000000] On node 0 totalpages: 16128 <4>[ 0.000000] zone(0): 16128 pages. <4>[ 0.000000] zone(1): 0 pages. <4>[ 0.000000] zone(2): 0 pages. <4>[ 0.000000] Kernel command line: mem=64512K <4>[ 0.000000] mips_counter_frequency:166666667 <4>[ 0.000000] r4k_offset: 00196e6a(1666666) <4>[ 0.000000] Calibrating delay loop… 222.00 BogoMIPS <6>[ 0.240000] Memory: 51256k/64512k available (2371k kernel code, 13256k reserved, 9608k data, 8k init, 0k highmem) <6>[ 1.090000] Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) <6>[ 1.090000] Inode cache hash table entries: 4096 (order: 3, 32768 bytes) <6>[ 1.090000] Mount cache hash table entries: 512 (order: 0, 4096 bytes) <4>[ 1.090000] Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) <4>[ 1.090000] Page-cache hash table entries: 16384 (order: 4, 65536 bytes) <4>[ 1.090000] Checking for 'wait' instruction… unavailable. <4>[ 1.090000] POSIX conformance testing by UNIFIX <4>[ 1.100000] PCI: Probing PCI hardware on host bus 0. <4>[ 1.100000] Autoconfig PCI channel 0x802a9180 <4>[ 1.100000] Scanning bus 00, I/O 0x1ae00000:0x1b000001, Mem 0x18000000:0x1a000001 <4>[ 1.100000] 00:0e.0 Class 0200: 168c:ff1d (rev 01) <4>[ 1.100000] Mem at 0x18000000 [size=0x10000] <6>[ 1.100000] Linux NET4.0 for Linux 2.4 <6>[ 1.100000] Based upon Swansea University Computer Society NET3.039 <4>[ 1.100000] Initializing RT netlink socket <4>[ 1.100000] Starting kswapd <6>[ 1.100000] Journalled Block Device driver loaded <4>[ 1.100000] fuse init (API version 7.5) <6>[ 1.100000] Initializing Cryptographic API <6>[ 1.100000] loop: loaded (max 8 devices) <6>[ 1.100000] SCSI subsystem driver Revision: 1.00 <6>[ 1.100000] md: raid0 personality registered as nr 2 <6>[ 1.100000] md: raid1 personality registered as nr 3 <6>[ 1.100000] md: raid5 personality registered as nr 4 <6>[ 1.100000] raid5: measuring checksumming speed <4>[ 1.150000] 8regs : 225.200 MB/sec <4>[ 1.200000] 32regs : 286.800 MB/sec <4>[ 1.200000] raid5: using function: 32regs (286.800 MB/sec) <6>[ 1.200000] md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>[ 1.200000] md: Autodetecting RAID arrays. <6>[ 1.200000] md: autorun … <6>[ 1.200000] md: … autorun DONE. <6>[ 1.200000] NET4: Linux TCP/IP 1.0 for NET4.0 <6>[ 1.200000] IP Protocols: ICMP, UDP, TCP, IGMP <6>[ 1.200000] IP: routing cache hash table of 512 buckets, 4Kbytes <6>[ 1.200000] TCP: Hash tables configured (established 4096 bind 8192) <6>[ 1.200000] IPv4 over IPv4 tunneling driver <6>[ 1.200000] GRE over IPv4 tunneling driver <6>[ 1.200000] NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <6>[ 1.200000] IPv6 v0.8 (usagi-stable-4.1, 20030214) for NET4.0 <6>[ 1.200000] IPv6 over IPv4 tunneling driver <1>[ 1.200000] 802.1Q VLAN Support v1.8 Ben Greear greearb@candelatech.com <1>[ 1.200000] All bugs added by David S. Miller davem@redhat.com <6>[ 1.200000] usb.c: registered new driver usbdevfs <6>[ 1.200000] usb.c: registered new driver hub <6>[ 1.200000] Initializing USB Mass Storage driver… <6>[ 1.200000] usb.c: registered new driver usb-storage <6>[ 1.200000] USB Mass Storage support registered. <6>[ 1.200000] cgu: misc_register on minor = 63 <4>[ 1.200000] ppe: ATM init succeeded (firmware version 1.1.0.2.1.13) <4>[ 1.200000] Infineon DEU initialization. <6>[ 1.200000] deu_init(): calling ifxdeu_init_des() <4>[ 1.200000] ifxdeu des initialize! <6>[ 1.200000] deu_init(): calling ifxdeu_init_aes() <4>[ 1.200000] ifxdeu aes initialize! <1>[ 1.200000] ifxdeu nitialized OK. Device Major : 254 <4>[ 1.200000] danube MAC driver loaded! <6>[ 1.200000] gptu: totally 6 16-bit timers/counters <6>[ 1.200000] gptu: misc_register on minor 62 <6>[ 1.200000] gptu: succeeded to request irq 118 <6>[ 1.200000] gptu: succeeded to request irq 119 <6>[ 1.200000] gptu: succeeded to request irq 120 <6>[ 1.200000] gptu: succeeded to request irq 121 <6>[ 1.200000] gptu: succeeded to request irq 122 <6>[ 1.200000] gptu: succeeded to request irq 123 <6>[ 1.200000] DANUBE MIPS24KEc MPS mailbox driver, Version 1.2.6 <6>[ 1.200000] © Copyright 2006, Infineon Technologies AG <4>[ 1.200000] ifx_mps_init_gpt_danube() - attaching to rising edge… <4>[ 1.200000] ifx_mps_init_gpt_danube() - calibration done, waited 718 loops! <6>[ 1.210000] IFX_MPS: using proc fs <6>[ 1.210000] NAND device: Manufacturer ID: 0xec, Chip ID: 0x75 (Samsung NAND 32MiB 3,3V 8-bit) <6>[ 1.210000] Scanning device for bad blocks <5>[ 1.260000] Creating 3 MTD partitions on "Danube Nand Controller": <5>[ 1.260000] 0x00000000-0x02000000 : "OpenRG Images" <5>[ 1.260000] 0x01e00000-0x02000000 : "Dect configuration" <5>[ 1.260000] 0x00000000-0x00004000 : "Atheros EEPROM" <4>[ 1.260000] Init NAND controller succeeded! <1>[ 1.260000] oamk: init_module() called. <1>[ 1.270000] Opening oam kernel socket <1>[ 1.270000] oamk: init_module() returned. <4>[ 1.270000] Danube Port Initialization <4>[ 1.270000] ttyS0 at MEM 0xbe100400 (irq = 2) is a IFX_ASC <4>[ 1.270000] ttyS1 at MEM 0xbe100c00 (irq = 9) is a IFX_ASC <4>[ 1.280000] VFS: Mounted root (tmpfs filesystem). <4>[ 1.280000] Mount of initial cramfs successful <6>[ 1.490000] Freeing init cramfs memory: 64k freed <6>[ 1.490000] Freeing unused kernel memory: 8k freed <4>[ 1.490000] Mounting cramfs image at 'cramfs' <6>[ 1.490000] klips_info:ipsec_init: KLIPS startup, FreeS/WAN IPSec version: 1.99 <4>[ 2.150000] Algorithmics/MIPS FPU Emulator v1.5 <4>[ 6.080000] Danube MEI version:1.00.09 <4>[ 6.080000] Danube MEI MIB version:0.90.04 <7>[ 6.140000] mib_poll_init: Starting mib_poll… <7>[ 6.240000] adsl_mib_poll: Inside mib poll loop … <4>[ 7.200000] Loading license 27b32d1bd167c7b5b96d2bbcc29f318d838bc6844712cfe1d10442762c9a506f3036fbf3e00e190cfe9456043a9ae4fb972b876fffed17b576a146f89e6a3111c94f32611b221145371bb7f5b3398c0de42b7cffe847cecc617866872263ef.SHC <4>[ 7.200000] loading license key: SHC <4>[ 7.250000] loading license key: SHC <6>[ 8.130000] JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc. <6>[ 8.570000] ath_hal: 0.9.14.25 (AR5416, REGOPS_FUNC) <6>[ 9.080000] wlan: 0.8.4.2 (Atheros/multi-bss) <6>[ 9.130000] ath_rate_atheros: Version 2.0.1 <4>[ 9.130000] Copyright © 2001-2004 Atheros Communications, Inc, All Rights Reserved <6>[ 9.180000] ath_dfs: Version 2.0.0 <4>[ 9.180000] Copyright © 2005-2006 Atheros Communications, Inc. All Rights Reserved <6>[ 9.290000] wlan: mac acl policy registered <6>[ 9.670000] ath_pci: 0.9.4.5 (Atheros/multi-bss) <6>[ 9.670000] ath_pci: CR-LSDK-1.3.1.115 <6>[ 9.680000] Changelist :0 Date: 0 <4>[ 9.690000] Chan Freq RegPwr HT CTL CTL_U CTL_L DFS <4>[ 9.690000] 1 2412n 20 HT20 1 0 1 N <4>[ 9.690000] 1 2412n 20 HT40 1 0 1 N <4>[ 9.690000] 2 2417n 20 HT40 1 0 1 N <4>[ 9.690000] 3 2422n 20 HT40 1 1 1 N <4>[ 9.690000] 4 2427n 20 HT40 1 1 1 N <4>[ 9.690000] 5 2432n 20 HT40 1 1 1 N <4>[ 9.690000] 6 2437n 20 HT40 1 1 1 N <4>[ 9.690000] 7 2442n 20 HT40 1 1 1 N <4>[ 9.690000] 8 2447n 20 HT40 1 1 1 N <4>[ 9.690000] 9 2452n 20 HT40 1 1 1 N <4>[ 9.690000] 10 2457n 20 HT40 1 1 1 N <4>[ 9.690000] 11 2462n 20 HT40 1 1 1 N <4>[ 9.690000] 12 2467n 20 HT40 1 1 0 N <4>[ 9.690000] 13 2472n 20 HT40 1 1 0 N <4>[ 9.700000] dfs_init_radar_filters: dfs→dfs_rinfo.rn_numradars: 0 <4>[ 9.700000] DFS min filter rssiThresh = 21 <4>[ 9.700000] DFS max pulse dur = 131 ticks <4>[ 9.740000] wifi0: 11ng rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps <4>[ 9.740000] wifi0: 11ng MCS: 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 <4>[ 9.740000] wifi0: mac 31.1 phy 11.0 radio 13.0 <4>[ 9.740000] wifi0: Use hw queue 1 for WME_AC_BE traffic <4>[ 9.740000] wifi0: Use hw queue 0 for WME_AC_BK traffic <4>[ 9.740000] wifi0: Use hw queue 2 for WME_AC_VI traffic <4>[ 9.740000] wifi0: Use hw queue 3 for WME_AC_VO traffic <4>[ 9.740000] wifi0: Use hw queue 8 for CAB traffic <4>[ 9.740000] wifi0: Use hw queue 9 for beacons <4>[ 9.740000] wifi0: Use hw queue 7 for UAPSD <6>[ 9.740000] wifi0: Atheros 5416 Owl emulation: mem=0x18000000, irq=22 hw_base=0xb8000000 <5>[ 10.040000] jffs2_get_inode_nodes(): Data CRC failed on node at 0x0011c11c: Read 0x687bbb27, calculated 0x6aa61935 <6>[ 24.560000] RATELIMIT: 2 messages of type IPSec kernel packet reported 23 second(s) ago <4>[ 24.560000] ipsec_null_init(alg_type=15 alg_id=11 name=null): ret=0 <4>[ 24.770000] IPV4 device driver registered <4>[ 25.050000] IFX TAPI, version 3.6.1.11, © 2007 Infineon Technologies AG IFX VMMC device driver, version 1.2.1.9, © 2007 Infineon Technologies AG <4>[ 25.350000] <4>[ 25.460000] 73M1966 Driver, Rev. 2.2.1, © 2007 Teridian Semiconductor Corp. <4>[ 25.460000] Config DANUBE FXO reset using GPIO-10 <4>[ 25.460000] Config DANUBE FXO interrupt using GPIO-1 <4>[ 25.460000] Config DANUBE FXO Chip Select using GPIO-9 <4>[ 25.460000] Config DANUBE FS <4>[ 25.470000] Config DANUBE PCLK <4>[ 25.500000] <4>[ 25.500000] <4>[ 25.500000] 73M1966 TAPI CTL, version 1.3.7, © 2007 Teridian Semiconductor Corp. <4>[ 25.500000] <4>[ 25.500000] m1966_tapi_ctl_init: CHRDEV registration completed successfully <6>[ 25.840000] dwc3884-hcd: irq 54, addr be101000 <6>[ 25.840000] usb.c: new USB bus registered, assigned bus number 1 <6>[ 25.970000] hub.c: USB hub found <6>[ 25.970000] hub.c: 1 port detected <7>[ 25.970000] dwc3884-hcd.c:1089: set_port_feature(c034d440, 0x8, 1) <7>[ 25.970000] dwc3884-hcd.c:1099: USB_PORT_FEAT_POWER <4>[ 27.470000] Vinetic: Using BBD file UK_BT_FXS.BIN <4>[ 28.570000] ok! <4>[ 28.570000] Version 11.3.1.1.0 up and running… <4>[ 28.770000] <4>[ 28.770000] m1966_tapi_open: dev_major:[221], dev_minor:[0] <4>[ 28.770000] m1966_tapi_open: Open Tapi DAA Driver, successful, device: 0 <4>[ 28.770000] m1966_process_ctl: COUNTRY:UK <4>[ 28.770000] FXO RESET 0→1 <4>[ 30.300000] VINETIC chip capabilities: <4>[ 30.300000] Type: 0 Specific: 0 Description: INFINEON TECHNOLOGIES <4>[ 30.300000] Type: 1 Specific: 6 Description: VMMC <4>[ 30.300000] Type: 2 Specific: 0 Description: POTS <4>[ 30.300000] Type: 2 Specific: 1 Description: PSTN <4>[ 30.300000] Type: 11 Specific: 6 Description: DEVICE TYPE <4>[ 30.300000] Type: 10 Specific: 258 Description: DEVICE VERSION <4>[ 30.300000] Type: 4 Specific: 0 Description: DSP <4>[ 30.300000] Type: 3 Specific: 12 Description: G.726 16 kbps <4>[ 30.300000] Type: 3 Specific: 13 Description: G.726 24 kbps <4>[ 30.300000] Type: 3 Specific: 14 Description: G.726 32 kbps <4>[ 30.300000] Type: 3 Specific: 15 Description: G.726 40 kbps <4>[ 30.300000] Type: 3 Specific: 8 Description: u-LAW <4>[ 30.300000] Type: 3 Specific: 9 Description: A-LAW <4>[ 30.300000] Type: 3 Specific: 1 Description: G.723 6.3kbps

HOME HUB V2B

toh/bt/homehub_v2b/bootlog.txt · Last modified: 2012/04/02 23:28 by jow