Differences

This shows you the differences between two versions of the page.

toh:buffalo:wbmr-hp-g300h [2014/03/02 13:49]
toh:buffalo:wbmr-hp-g300h [2014/08/23 15:56] (current)
lutzr add link to bug report
Line 51: Line 51:
Although the WBMR-HP-G300H is supported in the current stable Attitude Adjustment 12.9 release, the pre-compiled image is fairly basic and must be tuned to work properly (ADSL, wifi, LUCI web interface and LEDs). Although the WBMR-HP-G300H is supported in the current stable Attitude Adjustment 12.9 release, the pre-compiled image is fairly basic and must be tuned to work properly (ADSL, wifi, LUCI web interface and LEDs).
-==== Turn on ADSL nas0 interface ====+==== Turn on ADSL nas0 interface in Attitude Adjustment 12.09 ====
-The ADSL interface is disabled in the image so turn it on:+The ADSL interface is disabled in the Attitude Adjustment 12.09 image so turn it on:
<code> <code>
/etc/init.d/br2684ctl enable /etc/init.d/br2684ctl enable
Line 59: Line 59:
</code> </code>
 +With Barrier Breaker 14.07-rc3 this is not necessary
==== Configure ADSL ==== ==== Configure ADSL ====
Line 89: Line 90:
fwannex a is for normal telephone lines, fwannex b is for ISDN. Option annex a2p means ADSL2+, annex a is standard ADSL. Username and password options are often not needed. fwannex a is for normal telephone lines, fwannex b is for ISDN. Option annex a2p means ADSL2+, annex a is standard ADSL. Username and password options are often not needed.
 +
 +=== Barrier Breaker 14.07-rc3 ===
 +
 +At least this version has a mismatch of the preinstalled ADSL firmware and its setting in /etc/config/network. As long as these do not match you won't get any ADSL connection.
 +
 +The preinstalled ADSL firmware is annex b, but set in /etc/config/network is annex a. If you want to use annex b, you have to change the adsl section to:
 +<code>
 +config adsl 'dsl'
 + option annex 'b'
 + option firmware '/lib/firmware/adsl.bin'
 +</code>
 +Otherwise you would have to install the annex a firmware.
 +
 +There is also a bug report about this: https://dev.openwrt.org/ticket/17443
==== Configure WIFI ==== ==== Configure WIFI ====

Back to top

toh/buffalo/wbmr-hp-g300h.1393764576.txt.bz2 · Last modified: 2014/03/02 13:49 (external edit)