U-Boot 1.1.3 for BUFFALO AIRSTATION (Aug 26 2008 - 13:08:44)


Board: Ralink APSoC DRAM:  32 MB

Top of RAM usable for U-Boot at: 82000000

Stack Pointer at: 81f4ff98

relocate_code Pointer at: 81fa0000

Now running in RAM - U-Boot at: 81fa0000


FLASH ID : 00h=[0xc2], 01h=[0x22a8], 0Eh=[0x0], 0Fh=[0x19]


 Set info->start[0]=BF000000

flash_protect ON: from 0xBF000000 to 0xBF02B84F

protect on 0

protect on 1

protect on 2

protect on 3

protect on 4

protect on 5

protect on 6

protect on 7

protect on 8

protect on 9

flash_protect ON: from 0xBF030000 to 0xBF03FFFF

protect on 10

flash_protect ON: from 0xBF040000 to 0xBF04FFFF

protect on 11

uboot use  81F4FFB0 - 82000000

Memory Test start(80000000) end(81F00000) size(01F00000)


Pattern 55555555  Writing...            Reading...
Pattern AAAAAAAA  Writing...            Reading...
Pattern 00000000  Writing...            Reading...

Memory Test OK

### buf_ver=[1.09] U-Boot Ver.=[1.09]

### build_date(env)=[Aug 26 2008 - 13:08:44] build_date(bin)=[Aug 26 2008 - 13:08:44]

============================================ 

Ralink UBoot Version: 3.1

-------------------------------------------- 

ASIC 3052_MP2 (MAC to GigaMAC Mode)

DRAM COMPONENT: 256Mbits 

DRAM BUS: 32BIT 

Total memory: 64 MBytes

Date:Aug 26 2008  Time:13:08:44

============================================ 

icache: sets:256, ways:4, linesz:32 ,total:32768

dcache: sets:128, ways:4, linesz:32 ,total:16384 


 ##### The CPU freq = 384 MHZ #### 


 SDRAM bus set to 32 bit 

 SDRAM size =32 Mbytes


Please choose the operation: 

   1: Load system code to SDRAM via TFTP. 

   2: Load system code then write to Flash via TFTP. 

   3: Boot system code via Flash (default).

   4: Entr boot command line interface.

   9: Load Boot Loader code then write to Flash via TFTP. 

 0 

Net:   

 eth_register  

Eth0 (10/100-M)

 enetvar=ethaddr,Eth addr:00:AA:BB:CC:DD:19

 00:AA:BB:CC:DD:19:


 eth_current->name = Eth0 (10/100-M)


   

6: System Load Linux Kernel then write to Flash via TFTP Server. 


 netboot_common, argc= 2 

 *************buf = 0x81fcb9e0

 **********NexTxPacket = 81fe3ac0


 NetTxPacket = 0x81FE3AC0 


 NetRxPackets[0] = 0x81FE40C0


 NetRxPackets[1] = 0x81FE46C0


 NetRxPackets[2] = 0x81FE4CC0


 NetRxPackets[3] = 0x81FE52C0


 NetRxPackets[4] = 0x81FE58C0


 NetRxPackets[5] = 0x81FE5EC0


 NetRxPackets[6] = 0x81FE64C0


 NetRxPackets[7] = 0x81FE6AC0


 NetRxPackets[8] = 0x81FE70C0


 NetRxPackets[9] = 0x81FE76C0


 NetRxPackets[10] = 0x81FE7CC0


 NetRxPackets[11] = 0x81FE82C0


 NetRxPackets[12] = 0x81FE88C0


 NetRxPackets[13] = 0x81FE8EC0


 NetRxPackets[14] = 0x81FE94C0


 NetRxPackets[15] = 0x81FE9AC0


 NetRxPackets[16] = 0x81FEA0C0


 NetRxPackets[17] = 0x81FEA6C0


 NetRxPackets[18] = 0x81FEACC0


 NetRxPackets[19] = 0x81FEB2C0


 KSEG1ADDR(NetTxPacket) = 0xA1FE3AC0 


 NetLoop,call eth_halt ! 


 NetLoop,call eth_init ! 

Trying Eth0 (10/100-M)


 Waitting for RX_DMA_BUSY status Start... done


 Mac to giga Mac mode  


 rx_ring = A1FCBE00, tx_ring0 = A1FCBCC0


 Header Payload scatter function is Disable !! 


 RT2880_PDMA_GLO_CFG=00000020 


 ************************************************* 


 RX_CALC_IDX0=19 


 RX_DRX_IDX0 = 0 


 ************************************************* 


 ETH_STATE_ACTIVE!! 


tftp server(receive) go, waiting:4[sec]

Trying Eth0 (10/100-M)


 ETH_STATE_ACTIVE!! 

Load address: 0x81000000


TftpServer Timeout;

Trying Eth0 (10/100-M)


 ETH_STATE_ACTIVE!! 

no file was loaded.


 netboot_common, argc= 3 


 KSEG1ADDR(NetTxPacket) = 0xA1FE3AC0 


 NetLoop,call eth_halt ! 


 NetLoop,call eth_init ! 

Trying Eth0 (10/100-M)


 ETH_STATE_ACTIVE!! 

Using Eth0 (10/100-M) device

TFTP from server 192.168.11.2; our IP address is 192.168.11.1

Filename 'firmware.ram'.


 TIMEOUT_COUNT=10,Load address: 0x81000000

Loading: *T T T T 

Retry count exceeded; starting again

   

3: System Boot system code via Flash.

## Booting image at bf050000 ...

   Image Name:   Linux Kernel Image

   Created:      2010-02-08  10:05:05 UTC


 System Control Status = 0x20440000 

   Image Type:   MIPS Linux Kernel Image (lzma compressed)

   Data Size:    895660 Bytes = 874.7 kB

   Load Address: 80000000

   Entry Point:  8029b000

   Verifying Checksum ... OK

   Uncompressing Kernel Image ... OK

No initrd

## Transferring control to Linux (at address 8029b000) ...

## Giving linux memsize in MB, 32


Starting kernel ...



LINUX started...

 THIS IS ASIC
Linux version 2.6.21 (vc03021@mkitec-xen) (gcc version 3.3.6) #1 Mon Feb 8 18:57:30 JST 2010

 The CPU feqenuce set to 384 MHz
CPU revision is: 0001964c
Determined physical RAM map:
 memory: 02000000 @ 00000000 (usable)
Built 1 zonelists.  Total pages: 8128
Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock4
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 16kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
cause = 800060, status = 1100ff00
PID hash table entries: 128 (order: 7, 512 bytes)
calculating r4koff... 00177000(1536000)
CPU frequency 384.00 MHz
Using 192.000 MHz high precision timer.
Console: colour dummy device 80x25
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 29456k/32768k available (2201k kernel code, 3312k reserved, 462k data, 116k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
SCSI subsystem initialized
NET: Registered protocol family 2
Time: MIPS clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
io scheduler noop registered (default)
FLASH_API: MAN_ID=C2 DEV_ID=22A8 SIZE=4MB
Ralink gpio driver initialized
HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096
N_HDLC line discipline registered.
mel_initsw initialized. 
++ RALINK_REG_PIODATA = B0000620
Serial: 8250/16550 driver $Revision: 1.3 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0xb0000500 (irq = 37) is a 16550A
serial8250: ttyS1 at I/O 0xb0000c00 (irq = 12) is a 16550A
loop: loaded (max 8 devices)
rdm_major = 254
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
NET: Registered protocol family 24
physmap flash device: bfc00000 at 400000
RT2880 SOC Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 6 MTD partitions on "RT2880 SOC Physically mapped flash":
0x00000000-0x00030000 : "uboot"
0x00030000-0x00040000 : "uboot_environ"
0x00040000-0x00050000 : "factory_default"
0x00050000-0x00140000 : "linux"
0x00140000-0x003f0000 : "rootfs"
0x003f0000-0x00400000 : "user_property"
block2mtd: version $Revision: 1.1.1.1 $
u32 classifier
nf_conntrack version 0.5.0 (256 buckets, 2048 max)
ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Linux
ipt_time loading
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 116k freed
Warning: unable to open an initial console.

init started:  BusyBox v1.00 (2010.02.08-09:59+0000) multi-call binary

Please press Enter to activate this console. rc.c(324) VerifyParamsOfInit :x:create status sections
insmod: /lib/modules/2.6.21: No such file or directory
Using /lib/modules/kernel/arch/mips/rt2880/rt_timer.ko
Load RT2880 Timer Module(Wdg/Soft)
insmod: /lib/modules/2.6.21: No such file or directory
Using /lib/modules/kernel/drivers/net/wireless/rt2860v2_ap/rt2860v2_ap.ko
rt2860v2_ap: module license 'unspecified' taints kernel.
2860 version : 1.9.0.0 (Feb  8 2010)


=== pAd = c0420000, size = 486264 ===

<-- RTMPAllocAdapterBlock, Status=0
RX DESC a1e06000  size = 2048
<-- RTMPAllocTxRxRingMemory, Status=0
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
Main bssid = 00:1d:73:d1:09:98
The UUID Hex string is:2880288028801880a880001d73d10998
The UUID ASCII string is:28802880-2880-1880-a880-001d73d10998!
<==== RTMPInitialize, Status=0
0x1300 = 00064220
wlctl-ral-tool.c(700) wl_ral_get_e2p :DEBUG:EEPROM [0x0038]:0x0000
wlctl-ral-tool.c(700) wl_ral_get_e2p :DEBUG:EEPROM [0x0036]:0x0426
ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
call WscStop[rt28xx_close/466]
insmod: /lib/modules/2.6.21: No such file or directory
Using /lib/modules/kernel/drivers/net/raeth/raeth.ko
GDMA1_MAC_ADRH -- : 0x00000000
GDMA1_MAC_ADRL -- : 0x00000000
Ralink APSoC Ethernet Driver Initilization. v1.60  256 rx/tx descriptors allocated, mtu = 1600!
GDMA1_MAC_ADRH -- : 0x00002c00
GDMA1_MAC_ADRL -- : 0x001d7311
PROC INIT OK!
GDMA1_MAC_ADRH -- : 0x00000100
GDMA1_MAC_ADRL -- : 0x001d73d1

phy_tx_ring = 0x01db5000, tx_ring = 0xa1db5000, size: 16 bytes

phy_rx_ring = 0x01db6000, rx_ring = 0xa1db6000, size: 16 bytes
GDMA1_FWD_CFG = 10000
Operation not supported
Operation not supported
insmod: /lib/modules/2.6.21: No such file or directory
Using /lib/modules/kernel/arch/mips/rt2880/rt_timer.ko
insmod: cannot insert `/lib/modules/kernel/arch/mips/rt2880/rt_timer.ko': Invalid parameters (17): Invalid argument
rcUtil.c(2307) Wireless_Insmod :####:insmod rt_timer : FAILED
insmod: /lib/modules/2.6.21: No such file or directory
Using /lib/modules/kernel/drivers/net/wireless/rt2860v2_ap/rt2860v2_ap.ko
insmod: cannot insert `/lib/modules/kernel/drivers/net/wireless/rt2860v2_ap/rt2860v2_ap.ko': Invalid parameters (17): Invalid argument
rcUtil.c(2316) Wireless_Insmod :####:insmod rt2860v2_ap : FAILED
rcUtil.c(2494) Wireless_Rmmod :####:rmmod rt2860Unload RT2880 Timer Module(Wdg/Soft)
v2_ap : SUCCESS
rcUtil.c(2501) Wireless_Rmmod :####:rmmod rt_timer : SUCCESS
insmod: /lib/modules/2.6.21: No such file or directory
Using /lib/modules/kernel/net/ipv4/netfilter/nf_conntrack_proto_gre.ko
insmod: /lib/modules/2.6.21: No such file or directory
Using /lib/modules/kernel/net/ipv4/netfilter/nf_nat_proto_gre.ko
insmod: /lib/modules/2.6.21: No such file or directoryLoad RT2880 Timer Module(Wdg/Soft)

Using /lib/modules/kernel/arch/mips/rt2880/rt_timer.ko
insmod: /lib/modules/2.6.21: No such file or directory
Using /lib/modules/kernel/drivers/net/wireless/rt2860v2_ap/rt2860v2_ap.ko
2860 version : 1.9.0.0 (Feb  8 2010)


=== pAd = c0418000, size = 486264 ===

<-- RTMPAllocAdapterBlock, Status=0
RX DESC a1ee6000  size = 2048
<-- RTMPAllocTxRxRingMemory, Status=0
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
Main bssid = 00:1d:73:d1:09:98
The UUID Hex string is:2880288028801880a880001d73d10998
The UUID ASCII string is:28802880-2880-1880-a880-001d73d10998!
<==== RTMPInitialize, Status=0
0x1300 = 00064220
wlctl-ral-tool.c(700) wl_ral_get_e2p :DEBUG:EEPROM [0x0038]:0x0000
wlctl-ral-tool.c(700) wl_ral_get_e2p :DEBUG:EEPROM [0x0036]:0x0426
ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
call WscStop[rt28xx_close/466]
insmod: /lib/modules/2.6.21: No such file or directory
Using /lib/modules/kernel/drivers/net/raeth/raeth.ko
insmod: cannot insert `/lib/modules/kernel/drivers/net/raeth/raeth.ko': register_vlan_device: ALREADY had VLAN registered
Invalid parameters (17): Invalid argument
SIOCSregister_vlan_device: ALREADY had VLAN registered
IFHWADDR: Device or resource busy
vconfig: socket or ioctl error for add: Invalid argument
vconfig: socket or ioctl error for add: Invalid argument
Operation not supported
Operation not supported
insmod: /lib/modules/2.6.21: No such file or directory
Using /lib/modules/kernel/arch/mips/rt2880/rt_timer.ko
insmod: cannot insert `/lib/modules/kernel/arch/mips/rt2880/rt_timer.ko': Invalid parameters (17): Invalid argument
rcUtil.c(2307) Wireless_Insmod :####:insmod rt_timer : FAILED
insmod: /lib/modules/2.6.21: No such file or directory
Using /lib/modules/kernel/drivers/net/wireless/rt2860v2_ap/rt2860v2_ap.ko
insmod: cannot insert `/lib/modules/kernel/drivers/net/wireless/rt2860v2_ap/rt2860v2_ap.ko': Invalid parameters (17): Invalid argument
rcUtil.c(2316) Wireless_Insmod :####:insmod rt2860v2_ap : FAILED
rcUtil.c(2494) Wireless_Rmmod :####:rmmod rt2860Unload RT2880 Timer Module(Wdg/Soft)
v2_ap : SUCCESS
rcUtil.c(2501) Wireless_Rmmod :####:rmmod rt_timer : SUCCESS
insmod: /lib/modules/2.6.21: No such file or directory
Using /lib/modules/kernel/net/ipv4/netfilter/nf_conntrack_proto_gre.ko
insmod: cannot insert `/lib/modules/kernel/net/ipv4/netfilter/nf_conntrack_proto_gre.ko': Invalid parameters (17): Invalid argument
insmod: /lib/modules/2.6.21: No such file or directory
Using /lib/modules/kernel/net/ipv4/netfilter/nf_nat_proto_gre.ko
insmod: cannot insert `/lib/modules/kernel/net/ipv4/netfilter/nf_nat_proto_gre.ko': Invalid parameters (17): Invalid argument
MidLayerModDep.c(798) startModules :INFO:Starting module init
MidLayerModDep.c(810) startModules :INFO:Started  module init 1[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_tz
MidLayerModDep.c(810) startModules :INFO:Started  module rc_tz 1[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_syslogd
MidLayerModDep.c(810) startModules :INFO:Started  module rc_syslogd 73[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_klogd
MidLayerModDep.c(810) startModules :INFO:Started  module rc_klogd 19[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_mode_check
insmod: /liregister_vlan_device: ALREADY had VLAN registered
b/modules/2.6.21: No such file or directory
Usiregister_vlan_device: ALREADY had VLAN registered
ng /lib/modules/kernel/drivers/net/raeth/raeth.ko
insmod: cannot insert `/lib/modules/kernel/drivers/net/raeth/raeth.ko': Invalid parameters (17): Invalid argument
SIOCSIFHWADDR: Device or resource busy
vconfig: socket or ioctl error for add: Invalid argument
vconfig: socket or ioctl error for add: Invalid argument
MidLayerModDep.c(810) startModules :INFO:Started  module rc_mode_check 1075[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_loif
MidLayerModDep.c(810) startModules :INFO:Started  module rc_loif 6[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_router_behavior
MidLayerModDep.c(810) startModules :INFO:Started  module rc_router_behavior 0[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module init
MidLayerModDep.c(810) startModules :INFO:Started  module init 0[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wiredlan
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wiredlan 7[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module id
No such device
MidLayerModDep.c(810) startModules :INFO:Started  module id 1009[msec]
MidLayLoad RT2880 Timer Module(Wdg/Soft)
erModDep.c(798) startModules :INFO:Starting module rc_lanif
insmod: /lib/modules/2.6.21: No such file or directory
Using /lib/modules/kernel/arch/mips/rt2880/rt_timer.ko
insmod: /lib/modules/2.6.21: No such file or directory
Using /lib/modules/kernel/drivers/net/wireless/rt2860v2_ap/rt2860v2_ap.ko
2860 version : 1.9.0.0 (Feb  8 2010)


=== pAd = c0418000, size = 486264 ===

<-- RTMPAllocAdapterBlock, Status=0
insmod: /lib/modules/2.6.21: No such file or directory
Using /lib/modules/kernel/drivers/buffalo/mcsnoop.ko
mcsnoop: flush all snoop entry
rc_lanif.c(370) StartOfrc_lanif :x:PPPoE Path throw?


Algorithmics/MIPS FPU Emulator v1.5
mcsnoop_br_ioctl_device:229: mcast_maxage 75000 / 250
Cannot assign requested address
MidLayerModDep.c(810) startModules :INFO:Started  module rc_lanif 1250[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_udhcpd
udhcpd (v0.9.9-pre) started
max_leases value (256) not sane, setting to 64 instead
MidLayerModDep.c(810) startModules :INFO:Started  module rc_udhcpd 19[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_httpd
MidLayer.c(2557) ML_DoCommandWithCmdMax :WARN:find &,/bin/httpd
MidLayerModDep.c(810) startModules :INFO:Started  module rc_httpd 1020[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wireless_pre
insmod: /lib/modules/2.6.21: No such file or directory
Using /lib/modules/kernel/arch/mips/rt2880/rt_timer.ko
insmod: cannot insert `/lib/modules/kernel/arch/mips/rt2880/rt_timer.ko': Invalid parameters (17): Invalid argument
rcUtil.c(2307) Wireless_Insmod :####:insmod rt_timer : FAILED
insmod: /lib/modules/2.6.21: No such file or directory
Using /lib/modules/kernel/drivers/net/wireless/rt2860v2_ap/rt2860v2_ap.ko
insmod: cannot insert `/lib/modules/kernel/drivers/net/wireless/rt2860v2_ap/rt2860v2_ap.ko': Invalid parameters (17): Invalid argument
rcUtil.c(2316) Wireless_Insmod :####:insmod rt2860v2_ap : FAILED
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wireless_pre 42[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wireless11bg
wlctl-ram.c(1890) wlconf_up :DEBUG:before : 001D73D10998
wlctl-ram.c(1891) wlconf_up :DEBRX DESC a1989000  size = 2048
UG:after  : 001D73D10998
wlctl-<-- RTMPAllocTxRxRingMemory, Status=0
ral-tool.c(308) wl_ral_setparam ERROR!!! :SET:SSID = 001DYour no. of SSIDs( = 1) does not match your BssidNum( = 4)!
73D10998
wlctl-ral-tool.c(308) wl_ral_setparam :SET:HideSSID = 0
wlctl-ral-tool.c(308) wl_ral_setparam :SET:WirelessMode = 9
wlctl-ral-tool.c(308) wl_ral_setparam :SET:BGProtection = 0
wlctl-ral-tool.c(308) wl_ral_setparam :SET:HT_PROTECT = 0
wlctl-ral-tool.c(308) wl_ral_setparam :SET:CountryRegion = 0
wlctl-ral-tool.c(308) wl_ral_setparam :SET:HT_BW = 0
wlctl-ral-tool.c(308) wl_ral_setparam :SET:HT_EXTCHA = 1
wlctl-ral-tool.c(308) wl_ral_setparam :SET:AutoChannelSelect = 1
wlctl-ral-tool.c(308) wl_ral_setparam :SET:Channel = 0
wlctl-ral-tool.c(308) wl_ral_setparam :SET:BasicRate = 15
wlctl-ral-tool.c(308) wl_ral_setparam :SET:WmmCapable = 1
wlctl-ral-tool.c(308) wl_ral_setparam :SET:TxBurst = 0
wlctl-ral-tool.c(308) wl_ral_setparam :SET:APAifsn = 3;7;1;1
wlctl-ral-tool.c(308) wl_ral_setparam :SET:APCwmin = 4;4;3;2
wlctl-ral-tool.c(308) wl_ral_setparam :SET:APCwmax = 6;10;4;3
wlctl-ral-tool.c(308) wl_ral_setparam :SET:APTxop = 0;0;94;47
wlctl-ral-tool.c(308) wl_ral_setparam :SET:APACM = 0;0;0;0
wlctl-ral-tool.c(308) wl_ral_setparam :SET:BSSAifsn = 3;7;2;2
wlctl-ral-tool.c(308) wl_ral_setparam :SET:BSSCwmin = 4;4;3;2
wlctl-ral-tool.c(308) wl_ral_setparam :SET:BSSCwmax = 10;10;4;3
wlctl-ral-tool.c(308) wl_ral_setparam :SET:BSSTxop = 0;0;94;47
wlctl-ral-tool.c(308) wl_ral_setparam :SET:BSSACM = 0;0;0;0
wlctl-ral-tool.c(308) wl_ral_setparam :SET:BuffaloCapability = 9
wlctl-ral-tool.c(308) wl_ral_setparam :SET:DtimPeriod = 1
wlctl-ral-tool.c(308) wl_ral_setparam :SET:NoForwarding = 0
wlctl-ral-tool.c(308) wl_ral_setparam :SET:NoForwardingBTNBSSID = 0
wlctl-ral-tool.c(308) wl_ral_setparam :SET:HT_RDG = 1
wlctl-ral-tool.c(327) wl_ral_setparam :NEW:NoDirectForwardBTNBSSID = 0
MidLayer.c(2557) ML_DoCommandWithCmdMax :WARN:find &,iwevent
wlctl-ral-tool.c(308) wl_ral_setparam :SET:AuthMode = WPAPSK
wlctl-ral-tool.c(308) wl_ral_setparam :SET:WPAPSK = 41yh9yk1n9512
wlctl-ral-tool.c(308) wl_ral_setparam :SET:EncrypType = AES
wlctl-ral-tool.c(308) wl_ral_setparam :SET:DefaultKeyID = 2
wlctl-ral-tool.c(308) wl_ral_setparam :SET:RekeyMethod = TIME
wlctl-ral-tool.c(308) wl_ral_setparam :SET:RekeyInterval = 3600
wlctl-ral-tool.c(308) wl_ral_setparam :SET:TxPower = 100
wlctl-ral-tool.c(308) wl_ral_setparam :SET:WscConfMode = 0
wlctl-ral-tool.c(308) wl_ral_setparam :SET:WscConfStatus = 2
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wireless11bg 112[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wireless_post
MidLayer.c(2793) ML_DoCommandVariableParamEx :x:## a_pCmd = ifconfig ra0 0.0.0.0 up ##

BuffaloCapability(9)
1. Phy Mode = 9
2. Phy Mode = 9
3. Phy Mode = 9
MCS Set = ff ff 00 00 00
Waiting for Wireless Events from interfaces...
Main bssid = 00:1d:73:d1:09:98
The UUID Hex string is:2880288028801880a880001d73d10998
The UUID ASCII string is:28802880-2880-1880-a880-001d73d10998!
<==== RTMPInitialize, Status=0
0x1300 = 00064380
Warning: Driver for device ra0 has been compiled with version 22
of Wireless Extension, while this program supports up to version 20.
Some things may be broken...

00:00:12.548714   ra0      Custom driver event:(RT2860) 00:00:00:00:00:00 disconnects with our wireless client
MidLayer.c(2793) ML_DoCoERROR!!! mmandVariableParRTMPCancelTimer failed, Timer hasn't been initialize!
amEx :x:## a_pCmERROR!!! d = brctl setporRTMPCancelTimer failed, Timer hasn't been initialize!
tsep br0 ra0 offERROR!!!  ##

RTMPCancelTimer failed, Timer hasn't been initialize!
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wireless_post 3027[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wireless11bg_mac_limit
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wireless11bg_mac_limit 22[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_aoss_mssid
MidLayerModDep.c(810) startModules :INFO:Started  module rc_aoss_mssid 6[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_nas
MidLayerModDep.c(810) startModules :INFO:Started  module rc_nas 3[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_ap_serv
server.c(249)start_ap_serv_server:INFO:---- Start !! ap_servd child process (port=22359[5757]).
server.c(101)standalone_ap_serv_server:INFO:listen device name = br0
server.c(254)start_ap_serv_server:INFO:---- Start !! ap_servd child process (port=22616[5858]).
server.c(101)standalone_ap_serv_server:INFO:listen device name = br0
MidLayerModDep.c(810) startModules :INFO:Started  module rc_ap_serv 13[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanif
Cannot assign requested address
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanif 1004[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_pre
Operation not supported
Operation not supported
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_pre 5038[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_auto_detect
MidLayer.c(2557) ML_DoCommandWithCmdMax :WARN:find &,auto_detect_retry
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_auto_detect 3050[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_auto_detect_dummy
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_auto_detect_dummy 1[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_auto_detect_dhcpcd
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_auto_detect_dhcpcd 1[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_auto_detect_pppoecd_0
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_auto_detect_pppoecd_0 1[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_auto_detect_pppoecd_1
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_auto_detect_pppoecd_1 1[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_auto_detect_pppoecd_2
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_auto_detect_pppoecd_2 1[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_auto_detect_pppoecd_3
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_auto_detect_pppoecd_3 1[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_auto_detect_pppoecd_4
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_auto_detect_pppoecd_4 1[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_auto_detect_pppoecd_check
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_auto_detect_pppoecd_check 0[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_manual
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_manual 0[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_dhcpcd
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_dhcpcd 0[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_pppoecd_0
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_pppoecd_0 0[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_pppoecd_1
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_pppoecd_1 0[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_pppoecd_2
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_pppoecd_2 0[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_pppoecd_3
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_pppoecd_3 0[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_pppoecd_4
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_pppoecd_4 0[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_pppoecd_check
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_pppoecd_check 0[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_post
route: SIOC[ADD|DEL]RT: No such process
mcsnoop: flush all snoop entry
Cannot assign requested address
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_post 1055[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_pppoeroute
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_pppoeroute 0[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_dnrd
MidLayer.c(2557) ML_DoCommandWithCmdMax :WARN:find &,dnrd
MidLayerModDep.c(810) startModules :INFO:Started  module rc_dnrd 6[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_ipfilter
iptables: Bad rule (does a matching rule exist in that chain?)
MidLayerModDep.c(810) startModules :INFO:Started  module rc_ipfilter 287[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_ipfilter_simple
MidLayerModDep.c(810) startModules :INFO:Started  module rc_ipfilter_simple 40[mcleanup /proc/net/nf_conntrack 
sec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_ipfilter_user
MidLayerModDep.c(810) startModules :INFO:Started  module rc_ipfilter_user 2[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_nat
MidLayerModDep.c(810) startModules :INFO:Started  module rc_nat 21[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_routectl
MidLayerModDep.c(810) startModules :INFO:Started  module rc_routectl 10[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_lltd
MidLayerModDep.c(810) startModules :INFO:Started  module rc_lltd 61[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wsc
killall: wscd: no process killed
wscconfig.c(65) wsccmdctl_main :DEBUG:wscconfig start-reg
wsccmdctl-ram.c(415) wsc_start :!:[[[[[[[[[[[[[[[[[[[[[[[[[ wsc_start ]]]]]]]]]]]]]]]]]]]]]]]]]

MidLayer.c(2557) ML_DoCommandWithCmdMax :WARN:find &,wscd
wscconfig.c(67) wsccmdctl_main :DEBUG:wscconfig start-reg success
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wsc 112[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_upnp
buf_ReadConfigurationFile [/tmp/wsc_config_REG.txt]*****************
CONFIGURED_MODE : 7
<config_mode>7
COnfMode = 7
UUID : 0x221acb40d79711ddb0101d4fc3355d70
<uuid>0x221acb40d79711ddb0101d4fc3355d70
DEVICE_NAME : BUFFDisable advatise PBC method
ALO AirStation
<dn>BUFFALO AirStation
MANUFACTURER : BUFFALO INC.
<manu>BUFFALO INC.
MODEL_NAME : WHR-G300N
<model>WHR-G300N
FIX_PIN : 10864869
<pin>10864869
CONFIGURED : yes
INTERFACE : ra0,ra1
<interface>ra0,ra1
<subif0>ra1
<if0>ra0
PROFILE : ra0;001D73D10998;WPAPSK;AES;41yh9yk1n9512;1;G;configured
<profile>
<prof>ra0 / 001D73D10998;WPAPSK;AES;41yh9yk1n9512;1;G;configured
<found if ra0>
PBC_WITH_AOSS : 1
<pbc_with_aoss>1
finished Read Configuration.
<<<<<<<<buf_WscInitiDisable advatise PBC method
alize>>>>>>
wscd[buf_WscInitialize(405)] iwpriv ra0 set WscControlIf=ra0
wscd[buf_WscInitialize(408)] iwpriv ra0 set WscClrProfile=0
wscd[buf_WscInitialize(448)] iwpriv ra0 set WscConfMode=7
wscd[buf_WscInitialize(450)] iwpriv ra0 set WscConfStatus=2
wscd[buf_WscInitialize(452)] iwpriv ra0 set WscMode=1
wscd[buf_WscInitialize(456)] iwpriv ra0 set WscApPinCode=10864869
wscd[buf_WscInitialize(462)] iwpriv ra0 set "WscProductCode=221acb40d79711ddb0101d4fc3355d70:BUFFALO AirStation:BUFFALO INC.:WHR-G300N"
wscd[buf_WscInitialize(465)] iwpriv ra0 set WscGetConf=0
wscd[buf_WscInitialize(467)] iwpriv ra0 set WscStatus=0
Cannot assign requested address
iptables v1.3.5: Couldn't find target `UPNP-PREROUTING-CHAIN'

Try `iptables -h' or 'iptables --help' for more information.
iptables: iptables: No chain/target/match by that name
No chain/target/match by that name
wanctl-wanstate_check.c(41) wanstate_check_main :wanctl:Start wanstate_check Daemon
MidLayerModDep.c(810) startModules :INFO:Started  module rc_upnp 3069[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_wan_qos
MidLayerModDep.c(810) startModules :INFO:Started  module rc_wan_qos 0[msec]
MidLayerModDep.c(798) startModules :INFO:Starting module rc_end_signal
MidLayer.c(2557) ML_DoCommandWithCmdMax :WARN:find &,lanctl
MidLayerModDep.c(810) startModules :INFO:Started  module rc_end_signal 11[msec]
mcsnoop: flush all snoop entry
ARPING to 192.168.11.1 from 192.168.11.1 via br0
Sent 1 probes (1 broadcast(s))
Received 0 reply
MidLayerModDep.c(877) signalModules :INFO:signaling module rc_udhcpd
MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_udhcpd
MidLayerModDep.c(877) signalModules :INFO:signaling module rc_aoss_mssid
MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_aoss_mssid
MidLayerModDep.c(877) signalModules :INFO:signaling module rc_wanctl_auto_detect
MidLayer.c(2557) ML_DoCommandWithCmdMax :WARN:find &,auto_detect_retry
MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_wanctl_auto_detect
MidLayerModDep.c(877) signalModules :INFO:signaling module rc_wanctl_post
MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_wanctl_post
MidLayerModDep.c(877) signalModules :INFO:signaling module rc_wanctl_pppoeroute
MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_wanctl_pppoeroute
MidLayerModDep.c(877) signalModules :INFO:signaling module rc_dnrd
MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_dnrd
MidLayerModDep.c(877) signalModules :INFO:signaling module rc_ipfilter
MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_ipfilter
MidLayerModDep.c(877) signalModules :INFO:signaling module rc_ipfilter_simple
MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_ipfilter_simple
MidLayerModDep.c(877) signalModules :INFO:signaling module rc_routectl
MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_routectl
MidLayerModDep.c(877) signalModules :INFO:signaling module rc_wsc
MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_wsc
MidLayerModDep.c(877) signalModules :INFO:signaling module rc_upnp
MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_upnp
MidLayerModDep.c(877) signalModules :INFO:signaling module rc_wan_qos
MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_wan_qos
MidLayerModDep.c(877) signalModules :INFO:signaling module rc_udhcpd
MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_udhcpd
MidLayerModDep.c(877) signalModules :INFO:signaling module rc_aoss_mssid
MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_aoss_mssid
MidLayerModDep.c(877) signalModules :INFO:signaling module rc_wanctl_auto_detect
MidLayer.c(2557) ML_DoCommandWithCmdMax :WARN:find &,auto_detect_retry
MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_wanctl_auto_detect
MidLayerModDep.c(877) signalModules :INFO:signaling module rc_wanctl_post
MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_wanctl_post
MidLayerModDep.c(877) signalModules :INFO:signaling module rc_wanctl_pppoeroute
MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_wanctl_pppoeroute
MidLayerModDep.c(877) signalModules :INFO:signaling module rc_dnrd
MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_dnrd
MidLayerModDep.c(877) signalModules :INFO:signaling module rc_ipfilter
MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_ipfilter
MidLayerModDep.c(877) signalModules :INFO:signaling module rc_ipfilter_simple
MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_ipfilter_simple
MidLayerModDep.c(877) signalModules :INFO:signaling module rc_routectl
MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_routectl
MidLayerModDep.c(877) signalModules :INFO:signaling module rc_wsc
MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_wsc
MidLayerModDep.c(877) signalModules :INFO:signaling module rc_upnp
MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_upnp
MidLayerModDep.c(877) signalModules :INFO:signaling module rc_wan_qos
MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_wan_qos

Back to top

toh/buffalo/whr-g300n/boot-log.txt · Last modified: 2013/04/22 04:04 (external edit)