Differences

This shows you the differences between two versions of the page.

toh:buffalo:whr-g300n:boot-log [2013/04/22 04:04] (current)
Line 1: Line 1:
 +<code>
 +U-Boot 1.1.3 for BUFFALO AIRSTATION (Aug 26 2008 - 13:08:44)
 +
 +
 +Board: Ralink APSoC DRAM:  32 MB
 +
 +Top of RAM usable for U-Boot at: 82000000
 +
 +Stack Pointer at: 81f4ff98
 +
 +relocate_code Pointer at: 81fa0000
 +
 +Now running in RAM - U-Boot at: 81fa0000
 +
 +
 +FLASH ID : 00h=[0xc2], 01h=[0x22a8], 0Eh=[0x0], 0Fh=[0x19]
 +
 +
 + Set info->start[0]=BF000000
 +
 +flash_protect ON: from 0xBF000000 to 0xBF02B84F
 +
 +protect on 0
 +
 +protect on 1
 +
 +protect on 2
 +
 +protect on 3
 +
 +protect on 4
 +
 +protect on 5
 +
 +protect on 6
 +
 +protect on 7
 +
 +protect on 8
 +
 +protect on 9
 +
 +flash_protect ON: from 0xBF030000 to 0xBF03FFFF
 +
 +protect on 10
 +
 +flash_protect ON: from 0xBF040000 to 0xBF04FFFF
 +
 +protect on 11
 +
 +uboot use  81F4FFB0 - 82000000
 +
 +Memory Test start(80000000) end(81F00000) size(01F00000)
 +
 +
 +Pattern 55555555  Writing...            Reading...
 +Pattern AAAAAAAA  Writing...            Reading...
 +Pattern 00000000  Writing...            Reading...
 +
 +Memory Test OK
 +
 +### buf_ver=[1.09] U-Boot Ver.=[1.09]
 +
 +### build_date(env)=[Aug 26 2008 - 13:08:44] build_date(bin)=[Aug 26 2008 - 13:08:44]
 +
 +============================================
 +
 +Ralink UBoot Version: 3.1
 +
 +--------------------------------------------
 +
 +ASIC 3052_MP2 (MAC to GigaMAC Mode)
 +
 +DRAM COMPONENT: 256Mbits
 +
 +DRAM BUS: 32BIT
 +
 +Total memory: 64 MBytes
 +
 +Date:Aug 26 2008  Time:13:08:44
 +
 +============================================
 +
 +icache: sets:256, ways:4, linesz:32 ,total:32768
 +
 +dcache: sets:128, ways:4, linesz:32 ,total:16384
 +
 +
 + ##### The CPU freq = 384 MHZ ####
 +
 +
 + SDRAM bus set to 32 bit
 +
 + SDRAM size =32 Mbytes
 +
 +
 +Please choose the operation:
 +
 +  1: Load system code to SDRAM via TFTP.
 +
 +  2: Load system code then write to Flash via TFTP.
 +
 +  3: Boot system code via Flash (default).
 +
 +  4: Entr boot command line interface.
 +
 +  9: Load Boot Loader code then write to Flash via TFTP.
 +
 + 0
 +
 +Net: 
 +
 + eth_register 
 +
 +Eth0 (10/100-M)
 +
 + enetvar=ethaddr,Eth addr:00:AA:BB:CC:DD:19
 +
 + 00:AA:BB:CC:DD:19:
 +
 +
 + eth_current->name = Eth0 (10/100-M)
 +
 +
 + 
 +
 +6: System Load Linux Kernel then write to Flash via TFTP Server.
 +
 +
 + netboot_common, argc= 2
 +
 + *************buf = 0x81fcb9e0
 +
 + **********NexTxPacket = 81fe3ac0
 +
 +
 + NetTxPacket = 0x81FE3AC0
 +
 +
 + NetRxPackets[0] = 0x81FE40C0
 +
 +
 + NetRxPackets[1] = 0x81FE46C0
 +
 +
 + NetRxPackets[2] = 0x81FE4CC0
 +
 +
 + NetRxPackets[3] = 0x81FE52C0
 +
 +
 + NetRxPackets[4] = 0x81FE58C0
 +
 +
 + NetRxPackets[5] = 0x81FE5EC0
 +
 +
 + NetRxPackets[6] = 0x81FE64C0
 +
 +
 + NetRxPackets[7] = 0x81FE6AC0
 +
 +
 + NetRxPackets[8] = 0x81FE70C0
 +
 +
 + NetRxPackets[9] = 0x81FE76C0
 +
 +
 + NetRxPackets[10] = 0x81FE7CC0
 +
 +
 + NetRxPackets[11] = 0x81FE82C0
 +
 +
 + NetRxPackets[12] = 0x81FE88C0
 +
 +
 + NetRxPackets[13] = 0x81FE8EC0
 +
 +
 + NetRxPackets[14] = 0x81FE94C0
 +
 +
 + NetRxPackets[15] = 0x81FE9AC0
 +
 +
 + NetRxPackets[16] = 0x81FEA0C0
 +
 +
 + NetRxPackets[17] = 0x81FEA6C0
 +
 +
 + NetRxPackets[18] = 0x81FEACC0
 +
 +
 + NetRxPackets[19] = 0x81FEB2C0
 +
 +
 + KSEG1ADDR(NetTxPacket) = 0xA1FE3AC0
 +
 +
 + NetLoop,call eth_halt !
 +
 +
 + NetLoop,call eth_init !
 +
 +Trying Eth0 (10/100-M)
 +
 +
 + Waitting for RX_DMA_BUSY status Start... done
 +
 +
 + Mac to giga Mac mode 
 +
 +
 + rx_ring = A1FCBE00, tx_ring0 = A1FCBCC0
 +
 +
 + Header Payload scatter function is Disable !!
 +
 +
 + RT2880_PDMA_GLO_CFG=00000020
 +
 +
 + *************************************************
 +
 +
 + RX_CALC_IDX0=19
 +
 +
 + RX_DRX_IDX0 = 0
 +
 +
 + *************************************************
 +
 +
 + ETH_STATE_ACTIVE!!
 +
 +
 +tftp server(receive) go, waiting:4[sec]
 +
 +Trying Eth0 (10/100-M)
 +
 +
 + ETH_STATE_ACTIVE!!
 +
 +Load address: 0x81000000
 +
 +
 +TftpServer Timeout;
 +
 +Trying Eth0 (10/100-M)
 +
 +
 + ETH_STATE_ACTIVE!!
 +
 +no file was loaded.
 +
 +
 + netboot_common, argc= 3
 +
 +
 + KSEG1ADDR(NetTxPacket) = 0xA1FE3AC0
 +
 +
 + NetLoop,call eth_halt !
 +
 +
 + NetLoop,call eth_init !
 +
 +Trying Eth0 (10/100-M)
 +
 +
 + ETH_STATE_ACTIVE!!
 +
 +Using Eth0 (10/100-M) device
 +
 +TFTP from server 192.168.11.2; our IP address is 192.168.11.1
 +
 +Filename 'firmware.ram'.
 +
 +
 + TIMEOUT_COUNT=10,Load address: 0x81000000
 +
 +Loading: *T T T T
 +
 +Retry count exceeded; starting again
 +
 + 
 +
 +3: System Boot system code via Flash.
 +
 +## Booting image at bf050000 ...
 +
 +  Image Name:  Linux Kernel Image
 +
 +  Created:      2010-02-08  10:05:05 UTC
 +
 +
 + System Control Status = 0x20440000
 +
 +  Image Type:  MIPS Linux Kernel Image (lzma compressed)
 +
 +  Data Size:    895660 Bytes = 874.7 kB
 +
 +  Load Address: 80000000
 +
 +  Entry Point:  8029b000
 +
 +  Verifying Checksum ... OK
 +
 +  Uncompressing Kernel Image ... OK
 +
 +No initrd
 +
 +## Transferring control to Linux (at address 8029b000) ...
 +
 +## Giving linux memsize in MB, 32
 +
 +
 +Starting kernel ...
 +
 +
 +
 +LINUX started...
 +
 + THIS IS ASIC
 +Linux version 2.6.21 (vc03021@mkitec-xen) (gcc version 3.3.6) #1 Mon Feb 8 18:57:30 JST 2010
 +
 + The CPU feqenuce set to 384 MHz
 +CPU revision is: 0001964c
 +Determined physical RAM map:
 + memory: 02000000 @ 00000000 (usable)
 +Built 1 zonelists.  Total pages: 8128
 +Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock4
 +Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
 +Primary data cache 16kB, 4-way, linesize 32 bytes.
 +Synthesized TLB refill handler (20 instructions).
 +Synthesized TLB load handler fastpath (32 instructions).
 +Synthesized TLB store handler fastpath (32 instructions).
 +Synthesized TLB modify handler fastpath (31 instructions).
 +Cache parity protection disabled
 +cause = 800060, status = 1100ff00
 +PID hash table entries: 128 (order: 7, 512 bytes)
 +calculating r4koff... 00177000(1536000)
 +CPU frequency 384.00 MHz
 +Using 192.000 MHz high precision timer.
 +Console: colour dummy device 80x25
 +Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
 +Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
 +Memory: 29456k/32768k available (2201k kernel code, 3312k reserved, 462k data, 116k init, 0k highmem)
 +Mount-cache hash table entries: 512
 +NET: Registered protocol family 16
 +SCSI subsystem initialized
 +NET: Registered protocol family 2
 +Time: MIPS clocksource has been installed.
 +IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
 +TCP established hash table entries: 1024 (order: 1, 8192 bytes)
 +TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
 +TCP: Hash tables configured (established 1024 bind 1024)
 +TCP reno registered
 +squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
 +squashfs: LZMA suppport for slax.org by jro
 +io scheduler noop registered (default)
 +FLASH_API: MAN_ID=C2 DEV_ID=22A8 SIZE=4MB
 +Ralink gpio driver initialized
 +HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096
 +N_HDLC line discipline registered.
 +mel_initsw initialized.
 +++ RALINK_REG_PIODATA = B0000620
 +Serial: 8250/16550 driver $Revision: 1.3 $ 2 ports, IRQ sharing disabled
 +serial8250: ttyS0 at I/O 0xb0000500 (irq = 37) is a 16550A
 +serial8250: ttyS1 at I/O 0xb0000c00 (irq = 12) is a 16550A
 +loop: loaded (max 8 devices)
 +rdm_major = 254
 +PPP generic driver version 2.4.2
 +PPP Deflate Compression module registered
 +PPP BSD Compression module registered
 +NET: Registered protocol family 24
 +physmap flash device: bfc00000 at 400000
 +RT2880 SOC Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
 + Amd/Fujitsu Extended Query Table at 0x0040
 +number of CFI chips: 1
 +cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
 +Creating 6 MTD partitions on "RT2880 SOC Physically mapped flash":
 +0x00000000-0x00030000 : "uboot"
 +0x00030000-0x00040000 : "uboot_environ"
 +0x00040000-0x00050000 : "factory_default"
 +0x00050000-0x00140000 : "linux"
 +0x00140000-0x003f0000 : "rootfs"
 +0x003f0000-0x00400000 : "user_property"
 +block2mtd: version $Revision: 1.1.1.1 $
 +u32 classifier
 +nf_conntrack version 0.5.0 (256 buckets, 2048 max)
 +ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Linux
 +ipt_time loading
 +TCP cubic registered
 +NET: Registered protocol family 1
 +NET: Registered protocol family 17
 +802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
 +All bugs added by David S. Miller <davem@redhat.com>
 +VFS: Mounted root (squashfs filesystem) readonly.
 +Freeing unused kernel memory: 116k freed
 +Warning: unable to open an initial console.
 +
 +init started:  BusyBox v1.00 (2010.02.08-09:59+0000) multi-call binary
 +
 +Please press Enter to activate this console. rc.c(324) VerifyParamsOfInit :x:create status sections
 +insmod: /lib/modules/2.6.21: No such file or directory
 +Using /lib/modules/kernel/arch/mips/rt2880/rt_timer.ko
 +Load RT2880 Timer Module(Wdg/Soft)
 +insmod: /lib/modules/2.6.21: No such file or directory
 +Using /lib/modules/kernel/drivers/net/wireless/rt2860v2_ap/rt2860v2_ap.ko
 +rt2860v2_ap: module license 'unspecified' taints kernel.
 +2860 version : 1.9.0.0 (Feb  8 2010)
 +
 +
 +=== pAd = c0420000, size = 486264 ===
 +
 +<-- RTMPAllocAdapterBlock, Status=0
 +RX DESC a1e06000  size = 2048
 +<-- RTMPAllocTxRxRingMemory, Status=0
 +1. Phy Mode = 0
 +2. Phy Mode = 0
 +3. Phy Mode = 0
 +MCS Set = 00 00 00 00 00
 +Main bssid = 00:1d:73:d1:09:98
 +The UUID Hex string is:2880288028801880a880001d73d10998
 +The UUID ASCII string is:28802880-2880-1880-a880-001d73d10998!
 +<==== RTMPInitialize, Status=0
 +0x1300 = 00064220
 +wlctl-ral-tool.c(700) wl_ral_get_e2p :DEBUG:EEPROM [0x0038]:0x0000
 +wlctl-ral-tool.c(700) wl_ral_get_e2p :DEBUG:EEPROM [0x0036]:0x0426
 +ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
 +ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
 +ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
 +ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
 +ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
 +ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
 +ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
 +call WscStop[rt28xx_close/466]
 +insmod: /lib/modules/2.6.21: No such file or directory
 +Using /lib/modules/kernel/drivers/net/raeth/raeth.ko
 +GDMA1_MAC_ADRH -- : 0x00000000
 +GDMA1_MAC_ADRL -- : 0x00000000
 +Ralink APSoC Ethernet Driver Initilization. v1.60  256 rx/tx descriptors allocated, mtu = 1600!
 +GDMA1_MAC_ADRH -- : 0x00002c00
 +GDMA1_MAC_ADRL -- : 0x001d7311
 +PROC INIT OK!
 +GDMA1_MAC_ADRH -- : 0x00000100
 +GDMA1_MAC_ADRL -- : 0x001d73d1
 +
 +phy_tx_ring = 0x01db5000, tx_ring = 0xa1db5000, size: 16 bytes
 +
 +phy_rx_ring = 0x01db6000, rx_ring = 0xa1db6000, size: 16 bytes
 +GDMA1_FWD_CFG = 10000
 +Operation not supported
 +Operation not supported
 +insmod: /lib/modules/2.6.21: No such file or directory
 +Using /lib/modules/kernel/arch/mips/rt2880/rt_timer.ko
 +insmod: cannot insert `/lib/modules/kernel/arch/mips/rt2880/rt_timer.ko': Invalid parameters (17): Invalid argument
 +rcUtil.c(2307) Wireless_Insmod :####:insmod rt_timer : FAILED
 +insmod: /lib/modules/2.6.21: No such file or directory
 +Using /lib/modules/kernel/drivers/net/wireless/rt2860v2_ap/rt2860v2_ap.ko
 +insmod: cannot insert `/lib/modules/kernel/drivers/net/wireless/rt2860v2_ap/rt2860v2_ap.ko': Invalid parameters (17): Invalid argument
 +rcUtil.c(2316) Wireless_Insmod :####:insmod rt2860v2_ap : FAILED
 +rcUtil.c(2494) Wireless_Rmmod :####:rmmod rt2860Unload RT2880 Timer Module(Wdg/Soft)
 +v2_ap : SUCCESS
 +rcUtil.c(2501) Wireless_Rmmod :####:rmmod rt_timer : SUCCESS
 +insmod: /lib/modules/2.6.21: No such file or directory
 +Using /lib/modules/kernel/net/ipv4/netfilter/nf_conntrack_proto_gre.ko
 +insmod: /lib/modules/2.6.21: No such file or directory
 +Using /lib/modules/kernel/net/ipv4/netfilter/nf_nat_proto_gre.ko
 +insmod: /lib/modules/2.6.21: No such file or directoryLoad RT2880 Timer Module(Wdg/Soft)
 +
 +Using /lib/modules/kernel/arch/mips/rt2880/rt_timer.ko
 +insmod: /lib/modules/2.6.21: No such file or directory
 +Using /lib/modules/kernel/drivers/net/wireless/rt2860v2_ap/rt2860v2_ap.ko
 +2860 version : 1.9.0.0 (Feb  8 2010)
 +
 +
 +=== pAd = c0418000, size = 486264 ===
 +
 +<-- RTMPAllocAdapterBlock, Status=0
 +RX DESC a1ee6000  size = 2048
 +<-- RTMPAllocTxRxRingMemory, Status=0
 +1. Phy Mode = 0
 +2. Phy Mode = 0
 +3. Phy Mode = 0
 +MCS Set = 00 00 00 00 00
 +Main bssid = 00:1d:73:d1:09:98
 +The UUID Hex string is:2880288028801880a880001d73d10998
 +The UUID ASCII string is:28802880-2880-1880-a880-001d73d10998!
 +<==== RTMPInitialize, Status=0
 +0x1300 = 00064220
 +wlctl-ral-tool.c(700) wl_ral_get_e2p :DEBUG:EEPROM [0x0038]:0x0000
 +wlctl-ral-tool.c(700) wl_ral_get_e2p :DEBUG:EEPROM [0x0036]:0x0426
 +ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
 +ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
 +ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
 +ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
 +ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
 +ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
 +ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
 +call WscStop[rt28xx_close/466]
 +insmod: /lib/modules/2.6.21: No such file or directory
 +Using /lib/modules/kernel/drivers/net/raeth/raeth.ko
 +insmod: cannot insert `/lib/modules/kernel/drivers/net/raeth/raeth.ko': register_vlan_device: ALREADY had VLAN registered
 +Invalid parameters (17): Invalid argument
 +SIOCSregister_vlan_device: ALREADY had VLAN registered
 +IFHWADDR: Device or resource busy
 +vconfig: socket or ioctl error for add: Invalid argument
 +vconfig: socket or ioctl error for add: Invalid argument
 +Operation not supported
 +Operation not supported
 +insmod: /lib/modules/2.6.21: No such file or directory
 +Using /lib/modules/kernel/arch/mips/rt2880/rt_timer.ko
 +insmod: cannot insert `/lib/modules/kernel/arch/mips/rt2880/rt_timer.ko': Invalid parameters (17): Invalid argument
 +rcUtil.c(2307) Wireless_Insmod :####:insmod rt_timer : FAILED
 +insmod: /lib/modules/2.6.21: No such file or directory
 +Using /lib/modules/kernel/drivers/net/wireless/rt2860v2_ap/rt2860v2_ap.ko
 +insmod: cannot insert `/lib/modules/kernel/drivers/net/wireless/rt2860v2_ap/rt2860v2_ap.ko': Invalid parameters (17): Invalid argument
 +rcUtil.c(2316) Wireless_Insmod :####:insmod rt2860v2_ap : FAILED
 +rcUtil.c(2494) Wireless_Rmmod :####:rmmod rt2860Unload RT2880 Timer Module(Wdg/Soft)
 +v2_ap : SUCCESS
 +rcUtil.c(2501) Wireless_Rmmod :####:rmmod rt_timer : SUCCESS
 +insmod: /lib/modules/2.6.21: No such file or directory
 +Using /lib/modules/kernel/net/ipv4/netfilter/nf_conntrack_proto_gre.ko
 +insmod: cannot insert `/lib/modules/kernel/net/ipv4/netfilter/nf_conntrack_proto_gre.ko': Invalid parameters (17): Invalid argument
 +insmod: /lib/modules/2.6.21: No such file or directory
 +Using /lib/modules/kernel/net/ipv4/netfilter/nf_nat_proto_gre.ko
 +insmod: cannot insert `/lib/modules/kernel/net/ipv4/netfilter/nf_nat_proto_gre.ko': Invalid parameters (17): Invalid argument
 +MidLayerModDep.c(798) startModules :INFO:Starting module init
 +MidLayerModDep.c(810) startModules :INFO:Started  module init 1[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_tz
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_tz 1[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_syslogd
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_syslogd 73[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_klogd
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_klogd 19[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_mode_check
 +insmod: /liregister_vlan_device: ALREADY had VLAN registered
 +b/modules/2.6.21: No such file or directory
 +Usiregister_vlan_device: ALREADY had VLAN registered
 +ng /lib/modules/kernel/drivers/net/raeth/raeth.ko
 +insmod: cannot insert `/lib/modules/kernel/drivers/net/raeth/raeth.ko': Invalid parameters (17): Invalid argument
 +SIOCSIFHWADDR: Device or resource busy
 +vconfig: socket or ioctl error for add: Invalid argument
 +vconfig: socket or ioctl error for add: Invalid argument
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_mode_check 1075[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_loif
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_loif 6[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_router_behavior
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_router_behavior 0[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module init
 +MidLayerModDep.c(810) startModules :INFO:Started  module init 0[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wiredlan
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wiredlan 7[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module id
 +No such device
 +MidLayerModDep.c(810) startModules :INFO:Started  module id 1009[msec]
 +MidLayLoad RT2880 Timer Module(Wdg/Soft)
 +erModDep.c(798) startModules :INFO:Starting module rc_lanif
 +insmod: /lib/modules/2.6.21: No such file or directory
 +Using /lib/modules/kernel/arch/mips/rt2880/rt_timer.ko
 +insmod: /lib/modules/2.6.21: No such file or directory
 +Using /lib/modules/kernel/drivers/net/wireless/rt2860v2_ap/rt2860v2_ap.ko
 +2860 version : 1.9.0.0 (Feb  8 2010)
 +
 +
 +=== pAd = c0418000, size = 486264 ===
 +
 +<-- RTMPAllocAdapterBlock, Status=0
 +insmod: /lib/modules/2.6.21: No such file or directory
 +Using /lib/modules/kernel/drivers/buffalo/mcsnoop.ko
 +mcsnoop: flush all snoop entry
 +rc_lanif.c(370) StartOfrc_lanif :x:PPPoE Path throw?
 +
 +
 +Algorithmics/MIPS FPU Emulator v1.5
 +mcsnoop_br_ioctl_device:229: mcast_maxage 75000 / 250
 +Cannot assign requested address
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_lanif 1250[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_udhcpd
 +udhcpd (v0.9.9-pre) started
 +max_leases value (256) not sane, setting to 64 instead
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_udhcpd 19[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_httpd
 +MidLayer.c(2557) ML_DoCommandWithCmdMax :WARN:find &,/bin/httpd
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_httpd 1020[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wireless_pre
 +insmod: /lib/modules/2.6.21: No such file or directory
 +Using /lib/modules/kernel/arch/mips/rt2880/rt_timer.ko
 +insmod: cannot insert `/lib/modules/kernel/arch/mips/rt2880/rt_timer.ko': Invalid parameters (17): Invalid argument
 +rcUtil.c(2307) Wireless_Insmod :####:insmod rt_timer : FAILED
 +insmod: /lib/modules/2.6.21: No such file or directory
 +Using /lib/modules/kernel/drivers/net/wireless/rt2860v2_ap/rt2860v2_ap.ko
 +insmod: cannot insert `/lib/modules/kernel/drivers/net/wireless/rt2860v2_ap/rt2860v2_ap.ko': Invalid parameters (17): Invalid argument
 +rcUtil.c(2316) Wireless_Insmod :####:insmod rt2860v2_ap : FAILED
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wireless_pre 42[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wireless11bg
 +wlctl-ram.c(1890) wlconf_up :DEBUG:before : 001D73D10998
 +wlctl-ram.c(1891) wlconf_up :DEBRX DESC a1989000  size = 2048
 +UG:after  : 001D73D10998
 +wlctl-<-- RTMPAllocTxRxRingMemory, Status=0
 +ral-tool.c(308) wl_ral_setparam ERROR!!! :SET:SSID = 001DYour no. of SSIDs( = 1) does not match your BssidNum( = 4)!
 +73D10998
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:HideSSID = 0
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:WirelessMode = 9
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:BGProtection = 0
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:HT_PROTECT = 0
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:CountryRegion = 0
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:HT_BW = 0
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:HT_EXTCHA = 1
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:AutoChannelSelect = 1
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:Channel = 0
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:BasicRate = 15
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:WmmCapable = 1
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:TxBurst = 0
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:APAifsn = 3;7;1;1
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:APCwmin = 4;4;3;2
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:APCwmax = 6;10;4;3
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:APTxop = 0;0;94;47
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:APACM = 0;0;0;0
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:BSSAifsn = 3;7;2;2
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:BSSCwmin = 4;4;3;2
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:BSSCwmax = 10;10;4;3
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:BSSTxop = 0;0;94;47
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:BSSACM = 0;0;0;0
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:BuffaloCapability = 9
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:DtimPeriod = 1
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:NoForwarding = 0
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:NoForwardingBTNBSSID = 0
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:HT_RDG = 1
 +wlctl-ral-tool.c(327) wl_ral_setparam :NEW:NoDirectForwardBTNBSSID = 0
 +MidLayer.c(2557) ML_DoCommandWithCmdMax :WARN:find &,iwevent
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:AuthMode = WPAPSK
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:WPAPSK = 41yh9yk1n9512
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:EncrypType = AES
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:DefaultKeyID = 2
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:RekeyMethod = TIME
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:RekeyInterval = 3600
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:TxPower = 100
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:WscConfMode = 0
 +wlctl-ral-tool.c(308) wl_ral_setparam :SET:WscConfStatus = 2
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wireless11bg 112[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wireless_post
 +MidLayer.c(2793) ML_DoCommandVariableParamEx :x:## a_pCmd = ifconfig ra0 0.0.0.0 up ##
 +
 +BuffaloCapability(9)
 +1. Phy Mode = 9
 +2. Phy Mode = 9
 +3. Phy Mode = 9
 +MCS Set = ff ff 00 00 00
 +Waiting for Wireless Events from interfaces...
 +Main bssid = 00:1d:73:d1:09:98
 +The UUID Hex string is:2880288028801880a880001d73d10998
 +The UUID ASCII string is:28802880-2880-1880-a880-001d73d10998!
 +<==== RTMPInitialize, Status=0
 +0x1300 = 00064380
 +Warning: Driver for device ra0 has been compiled with version 22
 +of Wireless Extension, while this program supports up to version 20.
 +Some things may be broken...
 +
 +00:00:12.548714  ra0      Custom driver event:(RT2860) 00:00:00:00:00:00 disconnects with our wireless client
 +MidLayer.c(2793) ML_DoCoERROR!!! mmandVariableParRTMPCancelTimer failed, Timer hasn't been initialize!
 +amEx :x:## a_pCmERROR!!! d = brctl setporRTMPCancelTimer failed, Timer hasn't been initialize!
 +tsep br0 ra0 offERROR!!!  ##
 +
 +RTMPCancelTimer failed, Timer hasn't been initialize!
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wireless_post 3027[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wireless11bg_mac_limit
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wireless11bg_mac_limit 22[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_aoss_mssid
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_aoss_mssid 6[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_nas
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_nas 3[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_ap_serv
 +server.c(249)start_ap_serv_server:INFO:---- Start !! ap_servd child process (port=22359[5757]).
 +server.c(101)standalone_ap_serv_server:INFO:listen device name = br0
 +server.c(254)start_ap_serv_server:INFO:---- Start !! ap_servd child process (port=22616[5858]).
 +server.c(101)standalone_ap_serv_server:INFO:listen device name = br0
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_ap_serv 13[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanif
 +Cannot assign requested address
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanif 1004[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_pre
 +Operation not supported
 +Operation not supported
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_pre 5038[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_auto_detect
 +MidLayer.c(2557) ML_DoCommandWithCmdMax :WARN:find &,auto_detect_retry
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_auto_detect 3050[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_auto_detect_dummy
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_auto_detect_dummy 1[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_auto_detect_dhcpcd
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_auto_detect_dhcpcd 1[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_auto_detect_pppoecd_0
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_auto_detect_pppoecd_0 1[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_auto_detect_pppoecd_1
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_auto_detect_pppoecd_1 1[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_auto_detect_pppoecd_2
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_auto_detect_pppoecd_2 1[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_auto_detect_pppoecd_3
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_auto_detect_pppoecd_3 1[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_auto_detect_pppoecd_4
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_auto_detect_pppoecd_4 1[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_auto_detect_pppoecd_check
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_auto_detect_pppoecd_check 0[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_manual
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_manual 0[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_dhcpcd
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_dhcpcd 0[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_pppoecd_0
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_pppoecd_0 0[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_pppoecd_1
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_pppoecd_1 0[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_pppoecd_2
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_pppoecd_2 0[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_pppoecd_3
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_pppoecd_3 0[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_pppoecd_4
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_pppoecd_4 0[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_pppoecd_check
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_pppoecd_check 0[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_post
 +route: SIOC[ADD|DEL]RT: No such process
 +mcsnoop: flush all snoop entry
 +Cannot assign requested address
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_post 1055[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wanctl_pppoeroute
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wanctl_pppoeroute 0[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_dnrd
 +MidLayer.c(2557) ML_DoCommandWithCmdMax :WARN:find &,dnrd
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_dnrd 6[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_ipfilter
 +iptables: Bad rule (does a matching rule exist in that chain?)
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_ipfilter 287[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_ipfilter_simple
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_ipfilter_simple 40[mcleanup /proc/net/nf_conntrack
 +sec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_ipfilter_user
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_ipfilter_user 2[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_nat
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_nat 21[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_routectl
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_routectl 10[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_lltd
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_lltd 61[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wsc
 +killall: wscd: no process killed
 +wscconfig.c(65) wsccmdctl_main :DEBUG:wscconfig start-reg
 +wsccmdctl-ram.c(415) wsc_start :!:[[[[[[[[[[[[[[[[[[[[[[[[[ wsc_start ]]]]]]]]]]]]]]]]]]]]]]]]]
 +
 +MidLayer.c(2557) ML_DoCommandWithCmdMax :WARN:find &,wscd
 +wscconfig.c(67) wsccmdctl_main :DEBUG:wscconfig start-reg success
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wsc 112[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_upnp
 +buf_ReadConfigurationFile [/tmp/wsc_config_REG.txt]*****************
 +CONFIGURED_MODE : 7
 +<config_mode>7
 +COnfMode = 7
 +UUID : 0x221acb40d79711ddb0101d4fc3355d70
 +<uuid>0x221acb40d79711ddb0101d4fc3355d70
 +DEVICE_NAME : BUFFDisable advatise PBC method
 +ALO AirStation
 +<dn>BUFFALO AirStation
 +MANUFACTURER : BUFFALO INC.
 +<manu>BUFFALO INC.
 +MODEL_NAME : WHR-G300N
 +<model>WHR-G300N
 +FIX_PIN : 10864869
 +<pin>10864869
 +CONFIGURED : yes
 +INTERFACE : ra0,ra1
 +<interface>ra0,ra1
 +<subif0>ra1
 +<if0>ra0
 +PROFILE : ra0;001D73D10998;WPAPSK;AES;41yh9yk1n9512;1;G;configured
 +<profile>
 +<prof>ra0 / 001D73D10998;WPAPSK;AES;41yh9yk1n9512;1;G;configured
 +<found if ra0>
 +PBC_WITH_AOSS : 1
 +<pbc_with_aoss>1
 +finished Read Configuration.
 +<<<<<<<<buf_WscInitiDisable advatise PBC method
 +alize>>>>>>
 +wscd[buf_WscInitialize(405)] iwpriv ra0 set WscControlIf=ra0
 +wscd[buf_WscInitialize(408)] iwpriv ra0 set WscClrProfile=0
 +wscd[buf_WscInitialize(448)] iwpriv ra0 set WscConfMode=7
 +wscd[buf_WscInitialize(450)] iwpriv ra0 set WscConfStatus=2
 +wscd[buf_WscInitialize(452)] iwpriv ra0 set WscMode=1
 +wscd[buf_WscInitialize(456)] iwpriv ra0 set WscApPinCode=10864869
 +wscd[buf_WscInitialize(462)] iwpriv ra0 set "WscProductCode=221acb40d79711ddb0101d4fc3355d70:BUFFALO AirStation:BUFFALO INC.:WHR-G300N"
 +wscd[buf_WscInitialize(465)] iwpriv ra0 set WscGetConf=0
 +wscd[buf_WscInitialize(467)] iwpriv ra0 set WscStatus=0
 +Cannot assign requested address
 +iptables v1.3.5: Couldn't find target `UPNP-PREROUTING-CHAIN'
 +
 +Try `iptables -h' or 'iptables --help' for more information.
 +iptables: iptables: No chain/target/match by that name
 +No chain/target/match by that name
 +wanctl-wanstate_check.c(41) wanstate_check_main :wanctl:Start wanstate_check Daemon
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_upnp 3069[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_wan_qos
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_wan_qos 0[msec]
 +MidLayerModDep.c(798) startModules :INFO:Starting module rc_end_signal
 +MidLayer.c(2557) ML_DoCommandWithCmdMax :WARN:find &,lanctl
 +MidLayerModDep.c(810) startModules :INFO:Started  module rc_end_signal 11[msec]
 +mcsnoop: flush all snoop entry
 +ARPING to 192.168.11.1 from 192.168.11.1 via br0
 +Sent 1 probes (1 broadcast(s))
 +Received 0 reply
 +MidLayerModDep.c(877) signalModules :INFO:signaling module rc_udhcpd
 +MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_udhcpd
 +MidLayerModDep.c(877) signalModules :INFO:signaling module rc_aoss_mssid
 +MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_aoss_mssid
 +MidLayerModDep.c(877) signalModules :INFO:signaling module rc_wanctl_auto_detect
 +MidLayer.c(2557) ML_DoCommandWithCmdMax :WARN:find &,auto_detect_retry
 +MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_wanctl_auto_detect
 +MidLayerModDep.c(877) signalModules :INFO:signaling module rc_wanctl_post
 +MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_wanctl_post
 +MidLayerModDep.c(877) signalModules :INFO:signaling module rc_wanctl_pppoeroute
 +MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_wanctl_pppoeroute
 +MidLayerModDep.c(877) signalModules :INFO:signaling module rc_dnrd
 +MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_dnrd
 +MidLayerModDep.c(877) signalModules :INFO:signaling module rc_ipfilter
 +MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_ipfilter
 +MidLayerModDep.c(877) signalModules :INFO:signaling module rc_ipfilter_simple
 +MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_ipfilter_simple
 +MidLayerModDep.c(877) signalModules :INFO:signaling module rc_routectl
 +MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_routectl
 +MidLayerModDep.c(877) signalModules :INFO:signaling module rc_wsc
 +MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_wsc
 +MidLayerModDep.c(877) signalModules :INFO:signaling module rc_upnp
 +MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_upnp
 +MidLayerModDep.c(877) signalModules :INFO:signaling module rc_wan_qos
 +MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_wan_qos
 +MidLayerModDep.c(877) signalModules :INFO:signaling module rc_udhcpd
 +MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_udhcpd
 +MidLayerModDep.c(877) signalModules :INFO:signaling module rc_aoss_mssid
 +MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_aoss_mssid
 +MidLayerModDep.c(877) signalModules :INFO:signaling module rc_wanctl_auto_detect
 +MidLayer.c(2557) ML_DoCommandWithCmdMax :WARN:find &,auto_detect_retry
 +MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_wanctl_auto_detect
 +MidLayerModDep.c(877) signalModules :INFO:signaling module rc_wanctl_post
 +MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_wanctl_post
 +MidLayerModDep.c(877) signalModules :INFO:signaling module rc_wanctl_pppoeroute
 +MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_wanctl_pppoeroute
 +MidLayerModDep.c(877) signalModules :INFO:signaling module rc_dnrd
 +MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_dnrd
 +MidLayerModDep.c(877) signalModules :INFO:signaling module rc_ipfilter
 +MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_ipfilter
 +MidLayerModDep.c(877) signalModules :INFO:signaling module rc_ipfilter_simple
 +MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_ipfilter_simple
 +MidLayerModDep.c(877) signalModules :INFO:signaling module rc_routectl
 +MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_routectl
 +MidLayerModDep.c(877) signalModules :INFO:signaling module rc_wsc
 +MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_wsc
 +MidLayerModDep.c(877) signalModules :INFO:signaling module rc_upnp
 +MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_upnp
 +MidLayerModDep.c(877) signalModules :INFO:signaling module rc_wan_qos
 +MidLayerModDep.c(888) signalModules :INFO:signaled  module rc_wan_qos
 +</code>

Back to top

toh/buffalo/whr-g300n/boot-log.txt · Last modified: 2013/04/22 04:04 (external edit)