User Tools

Site Tools


toh:buffalo:wzr-hp-ag300h

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Previous revision
toh:buffalo:wzr-hp-ag300h [2014/02/19 20:59]
toh:buffalo:wzr-hp-ag300h [2014/12/10 19:22] (current)
DomQ [Installation using the OEM web interface]
Line 17: Line 17:
 The easiest way to install OpenWrt is by using the firmware utility of the OEM web interface: The easiest way to install OpenWrt is by using the firmware utility of the OEM web interface:
   - Connect to the WebInterface at [[http://​192.168.11.1]] and go to //"​Administration"//​ -> //"​Firmware Upgrade"//​   - Connect to the WebInterface at [[http://​192.168.11.1]] and go to //"​Administration"//​ -> //"​Firmware Upgrade"//​
-  - Upload the OpenWrt-Image you want to install, e.g. [[http://​downloads.openwrt.org/​attitude_adjustment/12.09/​ar71xx/​generic/​openwrt-ar71xx-generic-wzr-hp-ag300h-squashfs-factory.bin]]+  - Upload the OpenWrt-Image you want to install, e.g. [[https://​downloads.openwrt.org/​barrier_breaker/14.07/​ar71xx/​generic/​openwrt-ar71xx-generic-wzr-hp-ag300h-squashfs-factory.bin]]
   - Make your PC obtain a new IP address from OpenWrt (''​dhclient eth0''​ or ''​pump -i eth0''​ or ''​ipconfig /​renew''​)   - Make your PC obtain a new IP address from OpenWrt (''​dhclient eth0''​ or ''​pump -i eth0''​ or ''​ipconfig /​renew''​)
   - proceed with [[doc:​howto:​basic.config]] to complete installation   - proceed with [[doc:​howto:​basic.config]] to complete installation
  
-**NOTE:** It has been reported ​that the squashfs-factory.bin ​is not working ​for this device, if the factory image is based on __DD-WRT__. See [[https://​www.mail-archive.com/​openwrt-users@lists.openwrt.org/​msg02637.html|this thread]]. Please update thread with your experience or file a bug if you run into a problem. According to the user, for installation from DD-WRT the instructions on the [[http://​wiki.openwrt.org/​toh/​buffalo/​wzr-600dhp?​s[]=wzr&​s[]=hp&​s[]=ag300h#​installation.using.the.oem.web.interface|WZR-600DHP]] page worked for him.+**NOTE:** It may happen, ​that the squashfs-factory.bin ​does not work for this device, if the factory image is based on __DD-WRT__. See [[https://​www.mail-archive.com/​openwrt-users@lists.openwrt.org/​msg02637.html|this thread]]. Please update ​the thread with your experience or file a bug if you run into a problem. According to the user, for installation from DD-WRT the instructions on the [[http://​wiki.openwrt.org/​toh/​buffalo/​wzr-600dhp?​s[]=wzr&​s[]=hp&​s[]=ag300h#​installation.using.the.oem.web.interface|WZR-600DHP]] page worked for him.
  
 ==== Installation using the TFTP method ==== ==== Installation using the TFTP method ====
Line 227: Line 227:
 For some Help with the Tags, please have a look here: [[meta:​tags]] For some Help with the Tags, please have a look here: [[meta:​tags]]
  
-{{tag>​GigabitEthernet 5Port 2PHY USB 802.11abgn 802.11abgn_simultan ath9k 128RAM 32Flash MIPS MIPS32 24Kc}}+{{tag>​GigabitEthernet 5Port 2NIC USB 802.11abgn 802.11abgn_simultan ath9k 128RAM 32Flash MIPS MIPS32 24Kc}}
toh/buffalo/wzr-hp-ag300h.1392839955.txt.bz2 · Last modified: 2014/02/19 20:59 (external edit)