Differences

This shows you the differences between two versions of the page.

toh:comtrend:ar5381u [2012/09/10 01:46]
toh:comtrend:ar5381u [2014/03/10 14:09] (current)
Line 1: Line 1:
====== Comtrend AR-5381u ====== ====== Comtrend AR-5381u ======
-**<color red>The AR-5381u is currently not supported!.</color>** +Supported since [[https://dev.openwrt.org/changeset/33895|R33895]].
Line 18: Line 17:
  - Acces to http://192.168.1.1 and upload binary file.   - Acces to http://192.168.1.1 and upload binary file.
  - Wait until router reboots.   - Wait until router reboots.
 +
 +
 +===== Specific Configuration =====
 +==== Interfaces ====
 +
 +The default network configuration is:
 +^ Interface Name ^ Description ^ Default configuration ^
 +| br-lan | LAN & WiFi | 192.168.1.1/24 |
 +| eth0 | LAN ports (0 to 3) | bridged |
 +| wlan0 | WiFi | bridged (disabled) |
 +
 +==== Switch Ports (for VLANs) ====
 +This is an example to configure the switch: numbers 0-2 will be lan, labeled as Ports LAN1X, LAN2X, LAN3X on the unit, number 3 (LAN4X) will be the Internet (WAN), 8 is the internal connection to the router itself. Don't be fooled: vlan1 = eth0.1, vlan2 = eth0.2 and so on.
 +^ Port ^ Switch port ^ Mode ^
 +| LAN1X | 0 | lan |
 +| LAN2X | 1 | lan |
 +| LAN3X | 2 | lan |
 +| LAN4X | 3 | Internet (WAN) |
 +
 +<HTML>
 +<p style="padding: 10px;border:1px dashed grey;height:410px;font:9px/11px Georgia, Garamond, Serif;overflow:Auto">
 +<code>#
 +config interface 'loopback'
 +        option ifname 'lo'
 +        option proto 'static'
 +        option ipaddr '127.0.0.1'
 +        option netmask '255.0.0.0'
 +
 +config globals 'globals'
 +        option ula_prefix 'fda5:ace8:376d::/48'
 +
 +config interface 'lan'
 +        option ifname 'eth0.1'
 +        option type 'bridge'
 +        option proto 'static'
 +        option ipaddr '192.168.1.1'
 +        option netmask '255.255.255.0'
 +        option ip6assign '60'
 +
 +config interface 'wan'
 +        option ifname 'eth0.2'
 +        option proto 'dhcp'
 +       
 +config switch
 +        option name 'eth0'
 +        option reset '1'
 +        option enable_vlan '1'
 +
 +config switch_vlan
 +        option device 'eth0'
 +        option vlan '1'
 +        option ports '0 1 2 8t'
 +
 +config switch_vlan
 +        option device 'eth0'
 +        option vlan '2'
 +        option ports '3 8t'
 +
 +</code>
 +</p>
 +</HTML>
Line 23: Line 83:
===== Hardware ===== ===== Hardware =====
==== Info ==== ==== Info ====
-| **[[wp>Instruction set|Architecture]]:**    | [[wp>MIPS architecture|MIPS]] |+| **[[wp>Instruction set|Instruction set]]:**    | [[wp>MIPS architecture|MIPS]] |
| **Vendor:**          | [[wp>Broadcom]] | | **Vendor:**          | [[wp>Broadcom]] |
| **[[doc:techref:Bootloader]]:**    | [[doc:techref:bootloader:CFE]] | | **[[doc:techref:Bootloader]]:**    | [[doc:techref:bootloader:CFE]] |
-| Bootloader version | 1.0.37-106.5-9 | 
-| **[[doc:hardware:soc|System-On-Chip]]:**  | Broadcom BCM6328 | 
-| **[[doc:hardware:cpu|CPU]]/Speed**        | BMIPS4350 / 320 MHz | 
| **Board ID:**      | 96328A-1241N | | **Board ID:**      | 96328A-1241N |
-| **Flash-Chip:**      | MX25L128 +| **[[doc:hardware:soc|System-On-Chip]]:**  | Broadcom BCM6328 | 
-| Flash size | 16 MiB | +| **[[doc:hardware:cpu|CPU]] @Frq**        | BMIPS4350 V7.5 @320 MHz | 
-| RAM | 64 MiB | +| **Flash-Chip:**      | MX25L12845EMI-10G (SPI) / 64KB block size x 256 main blocks
-| Wireless | BCM43225 (14e4:a8d8) 802.11b/g/n +| **Flash size** | 16 MiB | 
-| Wireless power | ? mW |+| **RAM-Chip** | [[http://pdf1.alldatasheet.com/datasheet-pdf/view/312992/ETRON/EM68B16CWPA-25H.html|EM68B16CWPA-25H]] / DDR2-800 | 
 +| **RAM size** | 64 MiB | 
 +| **Wireless** | BCM43225 (14e4:a8d8) 802.11b/g/n (onboard) |
| **Ethernet:**        | Internal BRCM6328 Switch | | **Ethernet:**        | Internal BRCM6328 Switch |
-| USB | yes +| **USB** | yes |
-| Power adapter | ? | +
-| Power margin | ? | +
-| Antenna | 2x | +
-| Antenna gain | ? dBi |+
| **[[doc:hardware:port.serial|Serial]]:**          | [[#Serial|Yes]] | | **[[doc:hardware:port.serial|Serial]]:**          | [[#Serial|Yes]] |
| **[[doc:hardware:port.jtag|JTAG]]:**            | [[#JTAG|?]]  | | **[[doc:hardware:port.jtag|JTAG]]:**            | [[#JTAG|?]]  |
Line 46: Line 101:
==== Photos ==== ==== Photos ====
=== Router === === Router ===
-{{:toh:comtrend:ar5381u.jpg}}+{{:toh:comtrend:ar5381u.jpg?500x300|}} 
 +=== Board up === 
 +{{:toh:comtrend:ar5381u_board_up.jpg?500x300|}} 
 +=== Board down === 
 +{{:toh:comtrend:ar5381u_board_down.jpg?500x300|}}
==== JTAG ==== ==== JTAG ====
Line 56: Line 115:
-> [[doc:hardware:port.serial]] general information about the serial port, serial port cable, etc. -> [[doc:hardware:port.serial]] general information about the serial port, serial port cable, etc.
-N/A+How to connect to the Serial Port of this specific device: 
 + 
 +{{:toh:comtrend:ar5381u_board_serial.jpg?500x300|}} 
 + 
 +**Photo of PCB with markings**
===== GPIO ===== ===== GPIO =====
==== LEDs ==== ==== LEDs ====
Read: [[doc:uci:system#leds|System configuration: Leds]] to configure the leds Read: [[doc:uci:system#leds|System configuration: Leds]] to configure the leds
-^ Pin ^ Event ^ Active ^ +^ Pin ^ Event ^ Active ^ Soldered
-| 4 | power | Low | +| 2 | inet (green) | Low | Yes
-| 3 | alarm | Low | +| 3 | alarm (red) | Low | Yes
-| 2 | inet | Low |+| 4 | power (green) | Low | Yes | 
 +| 5 | wps | Low | No | 
 +| 8 | power (red) | Low | No | 
 +| 11 | alarm (green) | Low | No |
==== Buttons ==== ==== Buttons ====
-> [[doc:howto:hardware.button]] on howto use and configure the hardware button(s). -> [[doc:howto:hardware.button]] on howto use and configure the hardware button(s).
-^ Pin ^ Event ^ Active ^ +^ Pin ^ Event ^ Active ^ Soldered
-| 23 | Reset | Low |+| 23 | Reset | Low | Yes | 
 +| 24 | Extra 1 | Low | No | 
 +| 31 | Extra 2 | Low | No |
===== Bootlogs ===== ===== Bootlogs =====
Line 75: Line 143:
<HTML> <HTML>
<p style="padding: 10px;border:1px solid grey;height:600px;font:10px/14px Georgia, Garamond, Serif;overflow:Auto;background-color:#FFFFFF"> <p style="padding: 10px;border:1px solid grey;height:600px;font:10px/14px Georgia, Garamond, Serif;overflow:Auto;background-color:#FFFFFF">
-<code> +<code>CFE version 1.0.37-106.5-9 for BCM96328 (32bit,SP,BE)
-CFE version 1.0.37-106.5-9 for BCM96328 (32bit,SP,BE)+
Build Date: 2010-12-20 22:52:56 (tony@broadcom_eu) Build Date: 2010-12-20 22:52:56 (tony@broadcom_eu)
Copyright (C) 2000-2009 Broadcom Corporation. Copyright (C) 2000-2009 Broadcom Corporation.
Line 572: Line 639:
</HTML> </HTML>
-==== Openwrt Bootlog ====+==== OpenWrt ====
<HTML> <HTML>
<p style="padding: 10px;border:1px solid grey;height:600px;font:10px/14px Georgia, Garamond, Serif;overflow:Auto;background-color:#FFFFFF"> <p style="padding: 10px;border:1px solid grey;height:600px;font:10px/14px Georgia, Garamond, Serif;overflow:Auto;background-color:#FFFFFF">
Line 763: Line 830:
</p> </p>
</HTML> </HTML>
 +
 +===== Tags =====
 +{{tag>bcm63xx bcm6328}}

Back to top

toh/comtrend/ar5381u.1347234402.txt.bz2 · Last modified: 2012/09/10 01:46 (external edit)