Cubietruck

For further Allwinner-based boards, please refer to soc.allwinner.sunxi

Hardware highlights

Model Ports
Cubietruck 2x USB2, 10/100/1000 Mbps ethernet, WiFi, Bluetooth, SATA, UEXT, VGA, HDMI, TOSlink, audio, IR

Wireless/Bluetooth = Broadcom BCM4329/BCM40181

Serial

You can use your usual serial levelshifter. Pinout is:


[ USB ]  GND    RX TX          [ WIFI ] [VGA]
          o  o  o  o 

Status

  • Please refer to soc.allwinner.sunxi regarding the Allwinner A20 SOC.
  • Booting from SD
  • Ethernet working
  • Wireless not working (needs kmod-brcmfmac)

Installation process

Please refer to soc.allwinner.sunxi.

dmesg

U-Boot 2013.10-rc2 (Feb 01 2014 - 13:07:47) Allwinner Technology

CPU:   Allwinner A20 (SUN7I)
Board: Cubietruck
I2C:   ready
DRAM:  2 GiB
MMC:   SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   emac
Hit any key to stop autoboot:  0
reading uEnv.txt
240 bytes read in 3 ms (78.1 KiB/s)
Loaded environment from uEnv.txt
Running uenvcmd ...
reading uImage
2307464 bytes read in 115 ms (19.1 MiB/s)
reading dtb
14308 bytes read in 5 ms (2.7 MiB/s)
## Booting kernel from Legacy Image at 46000000 ...
   Image Name:   ARM OpenWrt Linux-3.12.5
   Created:      2014-02-01  14:07:55 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2307400 Bytes = 2.2 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 49000000
   Booting using the fdt blob at 0x49000000
   Loading Kernel Image ... OK
   Using Device Tree in place at 49000000, end 490067e3

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.12.5 (zalan@zlaptop) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r39315) ) #1 SMP PREEMPT Sat Feb 1 15:07:15 CET 2014
[    0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Allwinner A1X (Device Tree), model: Cubietech Cubietruck
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] PERCPU: Embedded 7 pages/cpu @c1504000 s7104 r8192 d13376 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522768
[    0.000000] Kernel command line: console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 2074764K/2097152K available (3199K kernel code, 151K rwdata, 912K rodata, 166K init, 600K bss, 22388K reserved, 1318912K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc040bf2c   (4112 kB)
[    0.000000]       .init : 0xc040c000 - 0xc0435bc0   ( 167 kB)
[    0.000000]       .data : 0xc0436000 - 0xc045bfb8   ( 152 kB)
[    0.000000]        .bss : 0xc045bfb8 - 0xc04f21f4   ( 601 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 26843ms
[    0.000000] Console: colour dummy device 80x30
[    0.000202] Calibrating delay loop... 1915.28 BogoMIPS (lpj=9576448)
[    0.059916] pid_max: default: 32768 minimum: 301
[    0.060103] Mount-cache hash table entries: 512
[    0.060942] CPU: Testing write buffer coherency: ok
[    0.061273] /cpus/cpu@0 missing clock-frequency property
[    0.061292] /cpus/cpu@1 missing clock-frequency property
[    0.061305] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.061341] Setting up static identity map for 0xc0011510 - 0xc0011544
[    0.120172] CPU1: failed to boot: -38
[    0.120198] Brought up 1 CPUs
[    0.120205] SMP: Total of 1 processors activated.
[    0.120212] CPU: All CPU(s) started in SVC mode.
[    0.124741] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[    0.125044] pinctrl core: initialized pinctrl subsystem
[    0.125408] regulator-dummy: no parameters
[    0.125719] NET: Registered protocol family 16
[    0.126018] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.131760] bio: create slab <bio-0> at 0
[    0.132283] reg-fixed-voltage ahci-5v.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@0, deferring probe
[    0.132309] platform ahci-5v.3: Driver reg-fixed-voltage requests probe deferral
[    0.132337] reg-fixed-voltage usb1-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
[    0.132352] platform usb1-vbus.4: Driver reg-fixed-voltage requests probe deferral
[    0.132373] reg-fixed-voltage usb2-vbus.5: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
[    0.132387] platform usb2-vbus.5: Driver reg-fixed-voltage requests probe deferral
[    0.132764] SCSI subsystem initialized
[    0.133207] usbcore: registered new interface driver usbfs
[    0.133275] usbcore: registered new interface driver hub
[    0.133402] usbcore: registered new device driver usb
[    0.134249] Switched to clocksource hstimer
[    0.139652] NET: Registered protocol family 2
[    0.140585] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.140721] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.140843] TCP: Hash tables configured (established 8192 bind 8192)
[    0.140924] TCP: reno registered
[    0.140943] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.141003] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.141350] NET: Registered protocol family 1
[    0.142523] audit: initializing netlink socket (disabled)
[    0.142576] type=2000 audit(0.130:1): initialized
[    0.143382] bounce pool size: 64 pages
[    0.149689] VFS: Disk quotas dquot_6.5.2
[    0.149944] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.151530] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.151565] msgmni has been set to 1476
[    0.152389] io scheduler noop registered
[    0.152403] io scheduler deadline registered
[    0.152438] io scheduler cfq registered (default)
[    0.154772] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    0.188379] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.210392] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A
[    0.702382] console [ttyS0] enabled
[    0.706557] sun4i-mdio 1c0b080.mdio: no regulator found
[    0.711869] libphy: sun4i_mii_bus: probed
[    0.754899] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.761465] ehci-platform: EHCI generic platform driver
[    0.766841] sunxi-ehci: Allwinner sunXi EHCI driver
[    0.771827] platform 1c14000.ehci0: Driver sunxi-ehci requests probe deferral
[    0.779078] platform 1c1c000.ehci1: Driver sunxi-ehci requests probe deferral
[    0.786355] usbcore: registered new interface driver usb-storage
[    0.792546] mousedev: PS/2 mouse device common for all mice
[    0.799343] sunxi-mci 1c0f000.sdc: base:0xf0098000 irq:64
[    0.806005] TCP: cubic registered
[    0.809325] Initializing XFRM netlink socket
[    0.813618] NET: Registered protocol family 17
[    0.818229] 8021q: 802.1Q VLAN Support v1.8
[    0.822529] Registering SWP/SWPB emulation handler
[    0.827870] registered taskstats version 1
[    0.832581] ahci-5v: 5000 mV
[    0.835993] usb1-vbus: 5000 mV
[    0.839422] usb2-vbus: 5000 mV
[    0.842827] sunxi-ehci 1c14000.ehci0: EHCI Host Controller
[    0.848440] sunxi-ehci 1c14000.ehci0: new USB bus registered, assigned bus number 1
[    0.856321] sunxi-ehci 1c14000.ehci0: irq 71, io mem 0x01c14000
[    0.874266] sunxi-ehci 1c14000.ehci0: USB 2.0 started, EHCI 1.00
[    0.880539] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.887370] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.894600] usb usb1: Product: EHCI Host Controller
[    0.899474] usb usb1: Manufacturer: Linux 3.12.5 ehci_hcd
[    0.904905] usb usb1: SerialNumber: 1c14000.ehci0
[    0.910161] hub 1-0:1.0: USB hub found
[    0.913992] hub 1-0:1.0: 1 port detected
[    0.918567] sunxi-ehci 1c1c000.ehci1: EHCI Host Controller
[    0.924074] sunxi-ehci 1c1c000.ehci1: new USB bus registered, assigned bus number 2
[    0.931923] sunxi-ehci 1c1c000.ehci1: irq 72, io mem 0x01c1c000
[    0.954276] sunxi-ehci 1c1c000.ehci1: USB 2.0 started, EHCI 1.00
[    0.960528] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.968358] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.976619] usb usb2: Product: EHCI Host Controller
[    0.981494] usb usb2: Manufacturer: Linux 3.12.5 ehci_hcd
[    0.986905] usb usb2: SerialNumber: 1c1c000.ehci1
[    0.992104] hub 2-0:1.0: USB hub found
[    0.995917] hub 2-0:1.0: 1 port detected
[    1.000229] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.007376] Waiting for root device /dev/mmcblk0p2...
[    1.362837] mmc0: new SD card at address 8f42
[    1.367710] mmcblk0: mmc0:8f42 SU02G 1.84 GiB
[    1.373791]  mmcblk0: p1 p2
[    1.445348] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[    1.454369] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[    1.466616] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
[    1.474523] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    1.481521] Freeing unused kernel memory: 164K (c040c000 - c0435000)
procd: Console is alive
procd: - preinit -
probing /dev/mmcblk0 for uboot env data
Detected generic sunxi // generic sunxi
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    2.036539] ahci sunxi-ahci: controller can't do PMP, turning off CAP_PMP
[    2.043337] ahci sunxi-ahci: forcing PORTS_IMPL to 0x1
[    2.048594] ahci sunxi-ahci: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[    2.056902] ahci sunxi-ahci: flags: ncq sntf pm led clo only pio slum part ccc
[    2.065264] scsi0 : ahci_platform
[    2.069056] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
[    2.424265] ata1: SATA link down (SStatus 0 SControl 300)
[    2.446486] sdhci: Secure Digital Host Controller Interface driver
[    2.452669] sdhci: Copyright(c) Pierre Ossman
[    2.457814] sdhci-pltfm: SDHCI platform and OF driver helper
mount_root[    4.988492] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
: mounting /dev/root
[    5.001490] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
procd: - early -
procd: - ubus -
procd: - init -
Please press Enter to activate this console.
[    8.616338] NET: Registered protocol family 10
[    8.626573] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
[    8.646229] tun: Universal TUN/TAP device driver, 1.6
[    8.651289] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    8.676432] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    8.691228] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    8.734998] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
[    8.741796] sunxi-rtc 1c20d00.rtc: RTC enabled
[    8.769429] u32 classifier
[    8.772147]     input device check on
[    8.778855]     Actions configured
[    8.783723] Mirror/redirect action on
[    8.804800] Loading modules backported from Linux version master-2014-01-23-0-g62c147d
[    8.812720] Backport generated by backports.git backports-20140124-0-g1256d3e
[    8.822215] ip_tables: (C) 2000-2006 Netfilter Core Team
[    8.889169] sun4i-emac 1c0b000.ethernet: using random MAC address de:de:06:01:cc:6f
[    8.900369] sun4i-emac 1c0b000.ethernet: eth0: at f0238000, IRQ 87 MAC: de:de:06:01:cc:6f
[    8.960509] xt_time: kernel timezone is -0000
[    8.973345] cfg80211: Calling CRDA to update world regulatory domain
[    8.986026] cfg80211: World regulatory domain updated:
[    8.991184] cfg80211:  DFS Master region: unset
[    9.023251] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    9.031753] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.039546] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.047317] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    9.055078] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[    9.062811] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[    9.070606] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[    9.082837] PPP generic driver version 2.4.2
[    9.088788] NET: Registered protocol family 24
[    9.099451] usbcore: registered new interface driver rt73usb
[    9.107405] usbcore: registered new interface driver rtl8187
[    9.121200] usbcore: registered new interface driver rt2500usb
[    9.131837] usbcore: registered new interface driver rt2800usb
[    9.141696] usbcore: registered new interface driver rtl8192cu
[   11.644644] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready



BusyBox v1.19.4 (2014-02-01 13:12:56 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 BARRIER BREAKER (Bleeding Edge, r39440)
 -----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
 -----------------------------------------------------
root@OpenWrt:/#

Tags

Back to top

toh/cubietech/cubietruck.txt · Last modified: 2014/05/14 10:15 by lorema