User Tools

Site Tools


toh:d-link:dir-320_revb1

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

toh:d-link:dir-320_revb1 [2013/02/02 18:38]
toh:d-link:dir-320_revb1 [2014/03/19 00:45] (current)
Line 1: Line 1:
-====== D-Link DIR-320 H/W Ver.: B1 == D-Link DIR-320NRU ​======+====== D-Link DIR-320 H/W Ver.: B1 ====== 
 ====== Supported Versions ====== ====== Supported Versions ======
 ^ Version/​Model ^ S/N ^ OpenWrt Version Supported ^ Model Specific Notes ^ ^ Version/​Model ^ S/N ^ OpenWrt Version Supported ^ Model Specific Notes ^
-| B1 | - | Bleeding Edge trunk r35307 (unofficial) ​Wi-Fi temporary is not working in g+n mode, working only in b or g mode |+| B1/B2 | - | > r38040 ​all B* revisions supported ​|
  
 ====== Hardware Highlights ====== ====== Hardware Highlights ======
Line 18: Line 19:
 ==== OEM easy installation ==== ==== OEM easy installation ====
  
-Is not possible now.+  - Get the firmware from [[https://​code.google.com/​p/​openwrt-on-dir-320-b1/​|here]] (patched for 4g, mpcs, oscam support) 
 +  - Plug off power cable 
 +  - Press and hold "​reset"​ button 
 +  - Plug on power cable, wait for 15 seconds 
 +  - Setup your network manually: IP 192.168.0.2 MASK 255.255.255.0 
 +  - Enter web interface 192.168.0.1 
 +  - Chose your .bin file and submit reflashing 
 +  - Setup your network to get options by DHCP 
 +  - Wait until power led will light 
 + 
 +=== Windows script using failsafe UI & curl=== 
 +|<​code>​@echo off 
 +set firmware=fw.bin 
 +set router=192.168.0.1 
 +echo =========================================================================== 
 +echo This batch file will upload %firmware% in the current directory to 
 +echo %router% during the router'​s bootup. 
 +echo. 
 +echo * Set your ethernet card's settings to: 
 +echo      IP:      192.168.0.10 
 +echo      Mask:    255.255.255.0 
 +echo      Gateway: 192.168.0.1. 
 +echo * Unplug the router'​s power cable. 
 +echo. 
 +echo Press Ctrl+C to abort or any other key to continue... 
 +pause > nul 
 +echo. 
 +echo * Press & hold reset button. 
 +echo * Re-plug the router'​s power cable. 
 +echo * Wait 10-15 seconds, then release reset button. 
 +echo. 
 +echo =============================================================================== 
 +echo Waiting for the router... Press Ctrl+C to abort. 
 +echo. 
 + 
 +:ping 
 +ping -n 1 -w 50 %router% | find "​TTL="​ 
 +if errorlevel 1 goto ping 
 + 
 +echo curl -v -0 --retry 100 --form firmware=@%firmware% -o %temp%\curl_out.tmp --progress-bar http://​%router% 
 +curl -v -0 --retry 100 --form firmware=@%firmware% -o %temp%\curl_out.tmp --progress-bar http://​%router% 
 +if errorlevel 1 goto ping 
 +echo. 
 +echo =============================================================================== 
 +echo * WAIT for about 2 minutes while the firmware is being flashed. 
 +echo * The default router address will be at 192.168.1.1. 
 +echo. 
 +pause 
 +exit /​b</​code>​|
  
 ==== OEM installation using the TFTP method ==== ==== OEM installation using the TFTP method ====
Line 35: Line 84:
 | TFTP Server Required IP Address | 192.168.0.2 | | TFTP Server Required IP Address | 192.168.0.2 |
  
-==== Upgrading OpenWrt ==== +
-<​HTML>​ +
-<​code>​ +
-Get the firmware from <a href=https://​sat-forum.info/​index.php/​topic,​9961.msg223200.html#​msg223200>​here</​a>​ (russian site, registration needed) and unzip it +
-Plug off power cable +
-Press and hold "​reset"​ button +
-Plug on power cable, wait for 15 seconds +
-Setup your network manually: IP 192.168.0.2 MASK 255.255.255.0 +
-Enter web interface 192.168.0.1 +
-Chose your .bin file and submit reflashing +
-Setup your network to get options by DHCP +
-Wait until power led will light +
-</​code>​ +
-</​HTML>​+
  
 ===== Bootlogs ===== ===== Bootlogs =====
Line 778: Line 814:
 ---- ----
   * [[toh:​d-link|D-Link]] [[toh:​categorymodel|CategoryModel]] [[toh:​categorynicfe4x1|100MB Network with 4x1 ports]]   * [[toh:​d-link|D-Link]] [[toh:​categorymodel|CategoryModel]] [[toh:​categorynicfe4x1|100MB Network with 4x1 ports]]
 +
 +===== Tags =====
 +----
 +{{tag>​ramips rt5350 usb 32ram FastEthernet usb2.0 wlan mips32 mips }}
toh/d-link/dir-320_revb1.1359826715.txt.bz2 · Last modified: 2013/02/02 18:38 (external edit)