Differences

This shows you the differences between two versions of the page.

--- toh:d-link:dir-600 [2012/11/13 05:29]
uvray313
+++ toh:d-link:dir-600 [2013/04/26 15:34] (current)
oldcomputerjunk
@@ Line 8: / Line 8: @@
 ^ Version/Model ^ S/N ^ OpenWrt Version Supported ^ Model Specific Notes ^
 | A1 | - | [[https://forum.openwrt.org/viewtopic.php?pid=103396|yes]] | same HW as [[toh:frys::fr54rtr|FRYS FR-54RTR]], similar to [[toh:d-link:DIR-615]] E1-E4 |
-| B1 & B2 | - | other hardware | same HW as [[toh:d-link:dir-300revb|DIR-300 Rev.B]] |
+| B1 & B2 | for B2, see [[toh:d-link:dir-300revb|DIR-300(B1)/DIR-600(B1&B2)]] | other hardware | same HW as [[toh:d-link:dir-300revb|DIR-300(B1)/DIR-600(B1&B2)]] |
 ==== Hardware Highlights ====
@@ Line 494: / Line 494: @@
 I will also host the modified ''mach-dir600-a1.c'' file for anyone that wants it (eventually).
+FIXME @jkiddo: - I recently ported the DIR-632-A1, and for this board the WLAN is not a normal GPIO, to get the WLAN LED to work you actually have to call <code>
+   ap9x_pci_setup_wmac_led_pin(0, DIR_632_A1_WLAN_GPIO_LED); </code>
+where DIR_632_A1_WLAN_GPIO_LED is 0 in this case, I have seen it as 1 in other boards. I suspect you need to do something similar here...
 ===== Failsafe mode =====

toh/d-link/dir-600.1352780979.txt.bz2 · Last modified: 2012/11/13 05:29 by uvray313

OpenWrt