User Tools

Site Tools


toh:d-link:dwl-2100ap

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Previous revision
toh:d-link:dwl-2100ap [2012/09/29 06:50]
toh:d-link:dwl-2100ap [2014/10/25 08:54] (current)
ds
Line 4: Line 4:
 ^ H/W Ver. ^ S/N ^ OpenWrt Version Supported ^ Model Specific Notes ^ ^ H/W Ver. ^ S/N ^ OpenWrt Version Supported ^ Model Specific Notes ^
 | A2 | - | [[https://​forum.openwrt.org/​viewtopic.php?​id=27470 | backfire-10.03.1-rc1]] & [[http://​downloads.openwrt.org/​snapshots/​trunk/​atheros/​|trunk]] | - | | A2 | - | [[https://​forum.openwrt.org/​viewtopic.php?​id=27470 | backfire-10.03.1-rc1]] & [[http://​downloads.openwrt.org/​snapshots/​trunk/​atheros/​|trunk]] | - |
-| A3 | - | - | - | +| A3 | - | [[https://​forum.openwrt.org/​viewtopic.php?​id=27470 | backfire-10.03.1-rc1]] & [[http://​downloads.openwrt.org/​snapshots/​trunk/​atheros/​|trunk]] ​| - | 
-| A4 | - | - | - | +| A4 | - | [[https://​forum.openwrt.org/​viewtopic.php?​id=27470 | backfire-10.03.1-rc1]] & [[http://​downloads.openwrt.org/​snapshots/​trunk/​atheros/​|trunk]] ​| - | 
-| A5 | - | - | - |+| A5 | - | [[https://​forum.openwrt.org/​viewtopic.php?​id=27470 | backfire-10.03.1-rc1]] & [[http://​downloads.openwrt.org/​snapshots/​trunk/​atheros/​|trunk]] ​| - |
  
 ===== Hardware Highlights ===== ===== Hardware Highlights =====
Line 20: Line 20:
 | **Wireless System-On-Chip:​** Atheros AR2313A |  | **Wireless System-On-Chip:​** Atheros AR2313A | 
 | **CPU Speed:** 180/240 MHz |  | **CPU Speed:** 180/240 MHz | 
-| **Flash-Chip:​** [[http://​www.amd.com/​us-en/​assets/​content_type/​white_papers_and_tech_docs/​23579c6.pdf|AMD AM29LV320DB]] (A2) / [[http://​www.atmel.com/​dyn/​resources/​prod_documents/​doc3308.pdf|Atmel AT49BV322A]] (A2, A3) / [[http://​www.spansion.com/​Support/​Datasheets/​s29gl-m_00_b8_e.pdf|Spansion S29GL032M]] (A4) / [[http://​datasheet.octopart.com/​MX29LV320DBTI-70G-Macronix-datasheet-8325138.pdf|Macronix MX29LV320D]] (A5) | +| **Flash-Chip:​** [[http://​www.amd.com/​us-en/​assets/​content_type/​white_papers_and_tech_docs/​23579c6.pdf|AMD AM29LV320DB]] (A2) / [[http://​www.atmel.com/​dyn/​resources/​prod_documents/​doc3308.pdf|Atmel AT49BV322A]] (A2, A3) / [[http://​www.spansion.com/​Support/​Datasheets/​s29gl-m_00_b8_e.pdf|Spansion S29GL032M]] (A4) / [[http://​www.spansion.com/​Pages/​Default.aspx|Spansion S29AL032D90TFI04]] (A4) / [[http://​datasheet.octopart.com/​MX29LV320DBTI-70G-Macronix-datasheet-8325138.pdf|Macronix MX29LV320D]] (A5) | 
 | **Flash size:** 4 MiB |  | **Flash size:** 4 MiB | 
 | **RAM:** 16 MiB |  | **RAM:** 16 MiB | 
 | **Wireless:​** Atheros AR2112A |  | **Wireless:​** Atheros AR2112A | 
-| **Ethernet:​** [[http://​www.icplus.com.tw/​pp-IP101.html|IC+ IP101]] (A2) / [[http://​www.icplus.com.tw/​pp-IP101A.html|IC+ IP101A]] (A2/A3/A4) |+| **Ethernet:​** [[http://​www.icplus.com.tw/​pp-IP101.html|IC+ IP101]] (A2) / [[http://​www.icplus.com.tw/​pp-IP101A.html|IC+ IP101A]] (A2/A3/A4/A5) |
 | **USB:** No |  | **USB:** No | 
 | **Serial:** [[http://​wiki.openwrt.org/​toh/​d-link/​dwl-2100ap#​serial|Yes]] 9600-8N1| ​ | **Serial:** [[http://​wiki.openwrt.org/​toh/​d-link/​dwl-2100ap#​serial|Yes]] 9600-8N1| ​
 | **JTAG:** [[doc:​hardware:​port.jtag|Yes]] | | **JTAG:** [[doc:​hardware:​port.jtag|Yes]] |
 +
 +Same board uses in the Alpha Networks WAP-D19.
 +
 +DWL-2100 A5 uses two antennas: printed on board (to right of LED "​Wlan"​) and external.
  
 ==== Opening the case ==== ==== Opening the case ====
-**Note:** This will void your warranty!+**Note:** This will void your warranty! ​
  
   *To remove the cover losen the two screws in the bottom cover and carefully lift the top cover at the back and move it towards the front (three clamps there).   *To remove the cover losen the two screws in the bottom cover and carefully lift the top cover at the back and move it towards the front (three clamps there).
   *There are two screws holding the PCB to the bottom cover.   *There are two screws holding the PCB to the bottom cover.
  
-//Main PCB (not for A4)//+//Main PCB H/W Versions: A1, A2, A3//
  
 {{:​inbox:​d-link:​dwl-2100ap:​board.png|PCB with four modifications:​ three solder bridges and one soldering attempt at JP1 pin 2}} {{:​inbox:​d-link:​dwl-2100ap:​board.png|PCB with four modifications:​ three solder bridges and one soldering attempt at JP1 pin 2}}
  
-//Main PCB (A4)//+//Main PCB H/W Versions: ​A4, a5//
 {{:​toh:​d-link:​dwl-2100ap_a4_internal.jpg|No modification needed}} {{:​toh:​d-link:​dwl-2100ap_a4_internal.jpg|No modification needed}}
  
Line 49: Line 53:
  
 | {{:​meta:​icons:​tango:​48px-dialog-warning.svg.png?​nolink}} | The serial communication signals on the 2100AP are ranging from 0 to 3.3V. These **must not** be connected directly to a RS232 cable, which operates at much broader voltage range (-12 to +12V). An appropriate level coupler must be built for this purpose. There are many such circuits on the net, and the simplest ones might use a common MAX 3232 chip.| | {{:​meta:​icons:​tango:​48px-dialog-warning.svg.png?​nolink}} | The serial communication signals on the 2100AP are ranging from 0 to 3.3V. These **must not** be connected directly to a RS232 cable, which operates at much broader voltage range (-12 to +12V). An appropriate level coupler must be built for this purpose. There are many such circuits on the net, and the simplest ones might use a common MAX 3232 chip.|
 +
 +=== Rev. A1, A2, A3 ===
  
 JP1 (12-pin, without headers, not for A4) is the serial port.  It's wired very similarly to the serial port in the [[oldwiki:​openwrtdocs:​hardware:​netgear:​wpn824|Netgear WPN824]] (also AR2313) and  [[oldwiki:​openwrtdocs:​hardware:​netgear:​wgt624|Netgear WGT624]] (AR231**2**) JP1 (12-pin, without headers, not for A4) is the serial port.  It's wired very similarly to the serial port in the [[oldwiki:​openwrtdocs:​hardware:​netgear:​wpn824|Netgear WPN824]] (also AR2313) and  [[oldwiki:​openwrtdocs:​hardware:​netgear:​wgt624|Netgear WGT624]] (AR231**2**)
  
 +** Serial **
 <​code>​ <​code>​
        ​1 ​   JP1        ​1 ​   JP1
Line 73: Line 80:
 {{:​inbox:​d-link:​dwl-2100ap:​serial_a2.png|Solder bridges on rev. A2}} {{:​inbox:​d-link:​dwl-2100ap:​serial_a2.png|Solder bridges on rev. A2}}
  
-**Rev. A4 only:**\\ +=== Rev. A4, A5 === 
-Serial ​and jtag (A4)\\+JTAG is J5 \\ 
 +Serial ​is JP2 (TTL levels - VCC 3.3V) \\ 
 + 
 +** JP2 ** 
 +^ -1- | _ ^ -2- ^ -3- ^ -4- ^ 
 +^ TX | _ ^ VCC ^ GND ^ RX ^ 
 {{:​toh:​d-link:​dwl-2100ap_a4_serial_and_jtag.jpg|JTAG-J5;​Serial-JP2}} {{:​toh:​d-link:​dwl-2100ap_a4_serial_and_jtag.jpg|JTAG-J5;​Serial-JP2}}
-{{:​toh:​d-link:​1.gif|}} +{{:​toh:​d-link:​1.gif|Serial pinounts}}
-<​code>​ +
-JTAG is J5 +
-Serial is JP2 (TTL levels) +
-1(upper),​4-RX,​TX +
-2-GND +
-</​code>​+
  
 ===== Installing ===== ===== Installing =====
Line 172: Line 179:
 ^ Vendor ^ Type ^ Loader ^ ^ Vendor ^ Type ^ Loader ^
 | AMD | AM29LV320DB | [[http://​rghost.net/​22011231|Redboot]] | | AMD | AM29LV320DB | [[http://​rghost.net/​22011231|Redboot]] |
-| Atmel | AT49BV322A | |+| Atmel | AT49BV322A | [[http://​rghost.ru/​58414270|Redboot]] | 
 +| Spansion | S29AL032D | [[http://​rghost.net/​22011231|Redboot]] ​|
 | Spansion | S29GL032D | [[http://​rghost.net/​22011231|Redboot]] | | Spansion | S29GL032D | [[http://​rghost.net/​22011231|Redboot]] |
-| Spansion | S29GL032M | +| Spansion | S29GL032M | [[http://​rghost.ru/​58414270|Redboot]] ​
-| Macronix | MX29LV320D | |+| Macronix | MX29LV320D | [[http://​rghost.ru/​58414270|Redboot]] ​|
  
 [[http://​xoomer.virgilio.it/​ramponis/​Pages/​flash.htm|Compiled RedBoot, need file "​BootLoader Redboot con support Lzma (molto più veloce) per OpenWRT sul 2100AP"​]] [[http://​xoomer.virgilio.it/​ramponis/​Pages/​flash.htm|Compiled RedBoot, need file "​BootLoader Redboot con support Lzma (molto più veloce) per OpenWRT sul 2100AP"​]]
toh/d-link/dwl-2100ap.1348894244.txt.bz2 · Last modified: 2012/09/29 06:50 (external edit)