User Tools

Site Tools


toh:devolo:devolo_dlan_pro_1200_wifi_ac

devolo dLAN pro 1200+ WiFi ac

Under Construction!
This page is currently under construction. You can edit the article to help completing it.

Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about right. A picture is good, too. Edit the page to see how to add pictures.

FIXME Any text with a light background (like this one) provides instructions for creating the Details Page. When you have filled in correct/useful information (instead of any template that's there) remove the instructions, as well as the <WRAP> that encloses it.

devolo dLAN pro 1200+ WiFi ac

FIXME

Getting started with a new Device Page

  1. This is an empty template that suggests the information that should be present on a well-constructed Device Page. This means, that you have to fill it with life and information.
  2. There are several "fixme" tags with text on a light background (like this text) throughout this template. As you fill in the page, remove those tags so that people can judge its completeness.
  3. When there are no more "fixme" tags left, delete this one too, along with the <WRAP> that encloses it.

Keep the articles modular

  • Please include only model specific information, omit bla,bla and put everything generic into separate articles
  • If you have no time to write certain stuff, link to generic.overview
  • basic.config should lead the way, do not explain this again
  • DO NOT provide a complete howto here! Instead groom the general HowTos.

Supported Versions

Experimental Versions

None at this time.

Hardware Highlights

ModelVersionSoCCPU MHzFlash MBRAM MBWLAN HardwareWLAN2.4WLAN5.0100M portsGbit portsModemUSB
dLAN pro 1200+ WiFi acAtheros AR934456016128Atheros AR9344, QCA9882-BR4Ab/g/na/n/ac-2Powerline-

Installation

Flash Layout

OpenWrt

Addr. Name Notes
0x000000000000-0x000000040000 "u-boot" ro
0x000000040000-0x000000050000 "u-boot-env" ro
0x000000050000-0x000000060000 "Config1" ro, DON'T TOUCH!
0x000000060000-0x000000070000 "Config2" ro, DON'T TOUCH!
0x000000070000-0x000000ff0000 "firmware" "kernel"+"rootfs"+"rootfs_data" autosplit
0x000000ff0000-0x000001000000 "art" ro, DON'T TOUCH!

OEM easy installation

The method to install OpenWrt depends on the currently running devolo firmware version.

  1. If your device is running the "dLAN® pro 1200+ WiFi ac 1.1.1" firmware the OpenWrt image is installed through the native Web UI firmware update page.
  2. If it's running a lower firmware version than version 1.1.1 or with a "delos dLAN® pro 1200+ WiFi ac" firmware 3.0.0 or higher, you can either up/downgrade to firmware "dLAN® pro 1200+ WiFi ac 1.1.1" and then execute step 1, or install using the TFTP method below.
  3. If it's running a "delos dLAN® pro 1200+ WiFi ac" firmware, you can instead of the TFTP method use sysupgrade with the -F option to install OpenWrt as explained below.

OEM installation with sysupgrade on "delos dLAN® pro 1200+ WiFi ac 3.0.0" or higher

generic.sysupgrade

Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing.

  • Login as root via SSH on the configured device IP address (static or DHCP) with the Web-UI password, then enter the following commands:

cd /tmp
wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
sysupgrade -F -n /tmp/xxx.abc
If you flashed a wrong image you have to debrick the device.

OEM installation using the TFTP method

generic.flashing.tftp

  1. download the OpenWrt sysupgrade image
  2. the image on the TFTP server must be called "uploadfile"
  3. setup your TFTP server to use the IP address 192.168.0.100/24
  4. connect an ethernet cable between your computer and one of the LAN ports
  5. power it up while pushing down the reset button
  6. wait until Home/WiFi-LEDs blink red/white a few times and stay on, then release the reset button
  7. wait until LEDs stop to blink red/white
  8. the device should boot now

If you flashed a wrong image you have to repeat the process with the correct image.

Specific values needed for tftp

TFTP server IPv4 address 192.168.0.100
Firmware TFTP image Latest OpenWrt release
Firmware filename on TFTP server uploadfile

Upgrading OpenWrt

LuCI Web Upgrade Process

Terminal Upgrade Process

If you don't have a GUI (LuCI) available, you can alternatively upgrade via the command line. There are two command line methods for upgrading:

  • sysupgrade
  • mtd

Note: It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing.

sysupgrade

  • Login as root via SSH on 192.168.1.1, then enter the following commands:

cd /tmp
wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
sysupgrade /tmp/xxx.abc

mtd

If sysupgrade does not support this router, use mtd.

  • Login as root via SSH on 192.168.1.1, then enter the following commands:

cd /tmp
wget http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
mtd write /tmp/xxx.abc firmware && reboot

Debricking

generic.debrick

You can flash a new OpenWrt firmware with TFTP → oem_installation_using_the_tftp_method.

Failsafe mode

Basic configuration

Basic configuration After flashing, proceed with this.
Set up your Internet connection, configure wireless, configure USB port, etc.

Specific Configuration

Network interfaces

The default network configuration is:

Interface Name Description Default configuration
br-lan LAN & WiFi & Powerline 192.168.1.1/24
wlan0 WiFi 5 GHz Radio0 disabled
wlan1 WiFi 2.4 GHz Radio1 disabled

Switch Ports (for VLANs)

dLAN pro 1200+ WiFi ac uses an Atheros AR8327 switch. Switch ports 1, 5, 6 are not used. The default configuration doesn't use VLANs.

LAN 2 is the interface that's placed next to the reset button.

Port Switch port
CPU (eth0) 0
Powerline 2
LAN 1 3
LAN 2 4

Buttons

hardware.button on howto use and configure the hardware button(s). Here, we merely name the buttons, so we can use them in the above Howto.

The Devolo dLAN pro 1200+ WiFi ac has the following buttons:

BUTTON Event
Reset reset
WiFi wps
Home/dLAN BTN_0

LEDs

The Devolo dLAN pro 1200+ WiFi ac has the following LEDs:

LED sysfs name
dLAN error (red) devolo:error:dlan
dLAN status (white) devolo:status:dlan
WiFi status (white) devolo:status:wlan

Powerline interface

The Powerline (PLC) interface of the dLAN pro 1200+ WiFi ac requires 3rd party firmware which is not available from standard OpenWrt package feeds. There will be a package feed on github which you must add to OpenWrt buildroot so you can build a firmware image which supports the plc interface.

FIXME Add instructions to compile packages required to setup the Powerline interface.

Hardware

Info

General
Brand Devolo
Model dLAN pro 1200+ WiFi ac
Versions
Device Type WiFi Router
Availability Available
Comments - general
OpenWrt Support
Supported Since Revision https://dev.openwrt.org/changeset/46342
Supported Since Release 15.05
Supported Current Release 15.05.1
Unsupported
Hardware
Instruction set MIPS32
Sub Instruction Set MIPS32 74K series
Bootloader U-Boot
Target ar71xx
System-On-Chip Atheros AR9344
CPU MHz 560
Flash MB 16
RAM MB 128
Network
Ethernet 100M ports -
Ethernet Gbit ports 2
Switch Atheros AR8327
Modem Powerline
VLAN ¿
Comments - network ports
Wireless
WLAN 2.4GHz b/g/n
WLAN 5.0GHz a/n/ac
WLAN Hardware
Detachable Antennas -
Comments - WLAN
Interfaces
USB ports -
SATA ports -
Serial ¿
JTAG ¿
Comments - USB & SATA ports
Misc
LED count 3
Button count 3
Power supply ¿
Links
Forum Topic URL http://¿
WikiDevi URL http://¿
OEM device homepage URL http://www.devolo.com/en/Business-Solutions/Wi-Fi-Pro/dLAN-pro-1200+-WiFi-ac
Firmware OEM Stock URL http://www.devolo.com/en/Business-Solutions/Wi-Fi-Pro/dLAN-pro-1200+-WiFi-ac/Starter-Kit/Downloads?jumpTo=subsitetop
Firmware OpenWrt Install URL https://downloads.openwrt.org/chaos_calmer/15.05.1/ar71xx/generic/openwrt-15.05.1-ar71xx-generic-dlan-pro-1200-ac-squashfs-sysupgrade.bin
Firmware OpenWrt Upgrade URL https://downloads.openwrt.org/chaos_calmer/15.05.1/ar71xx/generic/openwrt-15.05.1-ar71xx-generic-dlan-pro-1200-ac-squashfs-sysupgrade.bin
Edit the underlying data View/Edit data

Photos

Front:
Insert photo of front of the casing

Back:
Insert photo of back of the casing

Backside label:
Insert photo of backside label

Opening the case

DANGER due to electricity

Users should never open devolo dLAN devices.

Opening the device poses a risk of electric shock!

Note: This will void your warranty!

Main PCB:
Insert photo of PCB

Serial

port.serial general information about the serial port, serial port cable, etc.

How to connect to the Serial Port of this specific device:
Insert photo of PCB with markings for serial port

Serial connection parameters
for Devolo dLAN pro 1200+ WiFi ac
115200, 8N1

JTAG

port.jtag general information about the JTAG port, JTAG cable, etc.

How to connect to the JTAG Port of this specific device:
Insert photo of PCB with markings for JTAG port

Bootloader mods

Hardware mods

None so far.

Bootlogs

U-Boot bootlog

U-Boot 1.1.4 (Build from QSDK-1.0 at May 13 2015 - 08:57:02) DB120 DRAM: sri Wasp 1.3 wasp_ddr_initial_config(271): (32bit) ddr2 init wasp_ddr_initial_config(448): Wasp ddr init done Tap value selected = 0xd [0x0 - 0x1b] dvl: configure GPIOs: setting output gpio states (set 0x00002000, clear 0x0020d000) set gpio direction (in/out) previous setting was: 0x0003f30b new setting will be: 0x00530b10 setting gpio OUT function mappings setting gpio IN function mappings clearing and disabling all gpio interrupts 128 MB Top of RAM usable for U-Boot at: 88000000 Reserving 214k for U-Boot at: 87fc8000 Reserving 192k for malloc() at: 87f98000 Reserving 44 Bytes for Board Info at: 87f97fd4 Reserving 36 Bytes for Global Data at: 87f97fb0 Reserving 128k for boot params() at: 87f77fb0 Stack Pointer at: 87f77f98 Now running in RAM - U-Boot at: 87fc8000 Flash Manuf Id 0xc2, DeviceId0 0x20, DeviceId1 0x18 flash size 16MB, sector count = 256 Flash: 16 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: ag934x_enet_initialize... No valid address in Flash. Using fixed address wasp reset mask:c02200 WASP ----> S17 PHY * athrs17_reg_init: complete : cfg1 0x80000000 cfg2 0x7114 eth0: 00:03:7f:09:0b:ad eth0 up eth0 Cal in flash at 0x9fff1000 Setting 0xb8116290 to 0x50a02d0f TFTP autoupdate supported (using reset gpio). CAUTION: Using quick erase. Remove soon! Checking for pressed RESET key ... Key is NOT pressed. Skipping autoupdate. Hit any key to stop autoboot: 0 ## Booting image at 9f070000 ... Image Name: MIPS OpenWrt Linux-3.18.29 Created: 2017-01-09 9:30:36 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 1160476 Bytes = 1.1 MB Load Address: 80060000 Entry Point: 80060000 Verifying Checksum at 0x9f070040 ...OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80060000) ... ## Giving linux memsize in bytes, 134217728 Starting kernel ...


OEM bootlog

COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE


OpenWrt bootlog

COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING


Notes

Space for additional notes, links to forum threads or other resources.

Tags

toh/devolo/devolo_dlan_pro_1200_wifi_ac.txt · Last modified: 2017/02/26 12:18 by Jalakas