User Tools

Site Tools


toh:linksys:wrt_ac_series

Linksys WRT AC Series

To prevent discombobulation, please follow the format already in place within this Wiki when editing
(incl. the Table of Contents)

Introduction

Official OpenWrt support for the WRT AC Series began under Chaos Calmer [CC], with Designated Driver [DD] being the current Development Branch

  • It is highly recommended to invest in a USB - TTL cable
    • This will permit the unbricking of the router should one brick it from a corrupted firmware flash
    • Please see Serial Port Synopsis for additional info

Please see Troubleshooting for common issues and solutions

Latest Discussion

2017

WRT AC Series Thread (2017)
JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC
1st / 15th 1st / 15th 1st / 15th

2016

WRT AC Series Thread (2016)
JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC
1st / 15th 1st / 15th 1st / 15th 1st / 15th 1st / 15th 1st / 15th 1st / 15th 1st / 15th 1st / 15th 1st / 15th 1st / 15th 1st / 15th

2015

WRT AC Series Thread (2015)
JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC
1st / 15th 1st / 15th 1st / 15th 1st / 15th 1st / 15th 1st / 15th 1st / 15th 1st / 15th 1st / 15th 1st / 15th 1st / 15th 1st / 15th

2014

WRT AC Series Thread (2014)
JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC
– / 15th 1st / 15th 1st / 15th 1st / 15th 1st / 15th 1st / 15th 1st / 15th 1st / 15th 1st / 15th

Supported Hardware

OEM Source Code

OEM Source Code

WRT1200AC

ModelVersionSupported Since RevSupported Since RelPlatformCPU MHzFlash MBRAM MBSwitchPower Supply Device TechdataComments
WRT1200ACv1 (caiman), v2 (caiman)https://dev.openwrt.org/changeset/4545615.05Marvell Armada 385 88F68202x 1300128NAND512Marvell 88E617612 VDC, 2.5 AView/Edit data[Launch Date: 2015.04] OEM Firmware Name: caiman.img

WRT1900AC

ModelVersionSupported Since RevSupported Since RelPlatformCPU MHzFlash MBRAM MBSwitchPower Supply Device TechdataComments
WRT1900ACv2 (cobra)https://dev.openwrt.org/changeset/4545615.05Marvell Armada 385 88F68202x 1600128NAND512Marvell 88E617612 VDC, 3.0 AView/Edit data[Launch Date: 2015.04] Serial 13J2; OEM Firmware Name: cobra.img
WRT1900ACv1 (mamba)https://dev.openwrt.org/changeset/4138715.05Marvell Armada XP MV782302x 1200128NAND256Marvell 88E617212 VDC, 4.0 AView/Edit data[Launch Date: 2014.03] Serial 13J1; OEM Firmware Name: blk-mamba.128mb.img

WRT1900ACS

ModelVersionSupported Since RevSupported Since RelPlatformCPU MHzFlash MBRAM MBSwitchPower Supply Device TechdataComments
WRT1900ACSv1 (shelby), v2 (shelby)https://dev.openwrt.org/changeset/4716515.05Marvell Armada 385 88F68202x 1600128NAND512Marvell 88E617612 VDC, 3.0 AView/Edit data[Launch Date: 2015.10] OEM Firmware Name: shelby.img

WRT3200ACM

ModelVersionSupported Since RevSupported Since RelPlatformCPU MHzFlash MBRAM MBSwitchPower Supply Device TechdataComments
WRT3200ACMv1 (rango)http://?Marvell Armada 385 88F68202x 1866256NAND512Marvell 88E635212 VDC, 3.0 AView/Edit data[Launch Date: 2016.10] OEM Firmware Name: rango.img

88W8864 mwlwifi

WiFi Bug Reports

If experiencing WiFi stability issues, verify installed WiFi driver version; update if newer version is offered, then verify if issue is still present:

opkg list-installed | grep mwlwifi

Stable

NemoAlex's Repo Installation Instructions Repo
Precompiled, installable binary

Installation

opkg update ; opkg install git-http ; cd /tmp ; git clone --depth 1 https://github.com/NemoAlex/mwlwifi-bin.git ; cd mwlwifi-bin/15.05.1 ; opkg install kmod-mwlwifi_3.18.23\+10.3.0.17-20160531-1_mvebu.ipk ; reboot

Verify:

strings /lib/modules/*.*/mwlwifi.ko | grep "^10.3"

Source Code

Kaloz's Repo Compilation Instructions Repo
Official Marvell source, compatible with both CC & DD

  • Compile: (as of July 14, 2016)
    • Modify package/kernel/mwlwifi/Makefile
      • PKG_VERSION:=10.3.0.17-20160601
      • PKG_SOURCE_VERSION:=4bb95ba1aeccce506a95499b49b9b844ecfae8a1
    • Rename package/kernel/mwlwifi/patches to patches.tmp
    • make package/kernel/mwlwifi/clean
    • make V=s (-jx)

Flash Storage Layout

If booting from primary partition, mtd6 will be named ubi, with mtd8 as ubi if booting from alternate partition
italics - title for section of flash storage bold - mtd device name for the partition monospace - name of the mtd partition

Armada XP

WRT1900AC v1
Layer 0 raw flash
128 MiB
Layer 1 mtd0
u-boot
1 MiB
mtd1
u_env
256 KiB
mtd2
s_env
256 KiB
mtd3
devinfo
1 MiB
firmware
80 MiB
mtd8
syscfg
38 MiB
Layer 2 mtd4
kernel1
40 MiB
mtd6
kernel2
40 MiB
Layer 3 primary
kernel image
3 MiB
mtd5
rootfs1 (ubi)
37 MiB
alternate
kernel image
3 MiB
mtd7
rootfs2 (ubi)
37 MiB

Armada 385

WRT1200AC / WRT1900AC v2 / WRT1900ACS
Layer 0 raw flash
128 MiB
Layer 1 mtd0
u-boot
1 MiB
mtd1
u_env
256 KiB
mtd2
s_env
256 KiB
mtd3
devinfo
1 MiB
firmware
80 MiB
mtd8
syscfg
38 MiB
Layer 2 mtd4
kernel1
40 MiB
mtd6
kernel2
40 MiB
Layer 3 primary
kernel image
6 MiB
mtd5
rootfs1 (ubi)
34 MiB
alternate
kernel image
6 MiB
mtd7
rootfs2 (ubi)
34 MiB
WRT3200ACM
Layer 0 raw flash
256 MiB
Layer 1 mtd0
u-boot
2 MiB
mtd1
u_env
128 KiB
mtd2
s_env
256 KiB
mtd3
devinfo
1920KB
mtd4
sysdiag
256KB
firmware
160 MiB
mtd9
syscfg
86 MiB
Layer 2 mtd5
kernel1
80 MiB
mtd7
kernel2
80 MiB
Layer 3 primary
kernel image
6 MiB
mtd6
rootfs1 (ubi)
74 MiB
alternate
kernel image
6 MiB
mtd8
rootfs2 (ubi)
74 MiB

Switch Layout

eth0/eth1: physical PCB connection (not directly exposed) LAN: physical LAN ports on router WAN: physical Internet port on router

Marvell 88E6172

WRT1900AC v1
sw.port 0 1 2 3 4 5 6 vlan ID
LAN 4 3 2 1 eth0 0
WAN Internet eth1 1

Marvell 88E6176

WRT1200AC / WRT1900AC v2 / WRT1900ACS
sw.port 0 1 2 3 4 5 6 vlan ID
LAN 4 3 2 1 eth1 1
WAN Internet eth0 0

Marvell 88E6352

WRT3200ACM
sw.port 0 1 2 3 4 5 6 vlan ID
LAN 4 3 2 1 eth1 1
WAN Internet eth0 0

Firmware Images

Firmware Bug Reports

Synopsis

There are several OpenWrt build sources for the WRT AC Series, with LuCI included in all except bare Development Branch builds

    • These are builds released officially by OpenWrt
        • As the name implies, this is the stable branch; it's currently based on Kernel 3.18.23 and is called Chaos Calmer [CC]
        • These are development branch snapshots, built daily by BuildBot, and should not be considered stable; it's currently based on Kernel 4.4.14, and is called Designated Driver [DD]
    • Based on the Development Branch, these are built, and maintained, by the parties listed
        • Based on Kernel 4.4.6, highly customized, and is intended to offer a complete OOBE
        • Based on Kernel 4.4.53, built for stability, containing OpenVPN, Dynamic-DNS, USB, UPnP, SQM QoS and QoS, Hardware Graphs, HW Buffer patches, and "Modern Theme" Interface.
        • Based on kernel 4.4.14, LEDE aims for versatility & ease of customization, with many similarities to, yet subtle differences from, OpenWrt [fork]
  • Please verify checksums prior to flashing firmware (ensures download is not corrupted)

OpenWrt Branches

Stable

Repository Chaos Calmer [CC] 15.05.1 (Released March 15, 2016)
Based on kernel version 3.18.23

Recommended for new members gpg sig sha256sums

WRT1200AC

WRT1200AC
This is the stable branch [CC]

  • V1 (caiman):
    • System Image SHA256: 7d8a98c617b1a62dd35f01af054d940d656ec3887526ecc34641df256be70907
    • Sysupgrade TAR SHA256: a5811a2aff004e0a64957b948fa2e68931bd9578ef84fffcc327898df8bb3762
WRT1900AC

WRT1900AC
This is the stable branch [CC]

  • V1 (mamba):
    • System Image SHA256: d5d7e0878cb4dcdf373d8d8e54ada37cc0d4b328ce54a96f253233d542d6e365
    • Sysupgrade TAR SHA256: ea5a2111c30c87dc7fe80aeb5b0ae2485cacc1c9533d4deab162d461daba3462

  • V2 (cobra):
    • System Image SHA256: c024fe4313e3305bb7210d57ba96d623689acd1009e793a41ac2e68e2997b969
    • Sysupgrade TAR SHA256: 1f0555b727c1b3b426740953fed434dbca92d97b5a10d26d5864b9883b13831e
WRT1900ACS

WRT1900ACS
This is the stable branch [CC]

  • V1 (shelby):
    • System Image SHA256: 4a7b97b94d03da57103b6cb90bc38ce616b60164e5974c3e9c7523a88e59e133
    • Sysupgrade TAR SHA256: 7e31aa183c8aabebf9bb155f6c2cb9aeee61af00cd36fcbf9fa7e506a7a0db39
kaloz

Repository Mildly Customized Chaos Calmer [CC] Build (Released October 13, 2016)
Based on kernel version 3.18.36

Config

WRT1200AC

WRT1200AC
Mildly customized CC Build with latest mwlwifi driver

WRT1900AC

WRT1900AC v1
Mildly customized CC Build with latest mwlwifi driver

WRT1900ACS

WRT1900ACS
Mildly customized CC Build with latest mwlwifi driver

WRT3200ACM

WRT3200ACM WARNING
Mildly customized CC Build with latest mwlwifi driver

Development

BuildBot GitHub Repository Designated Driver [DD] Daily Snapshot
Based on kernel version 4.4.14

Should not be considered stable Config sha256sums

WRT1200AC

WRT1200AC
Bare minimum build [DD], built daily by BuildBot, & requires installation of LuCI

WRT1900AC

WRT1900AC
Bare minimum build [DD], built daily by BuildBot, & requires installation of LuCI

WRT1900ACS

WRT1900ACS
Bare minimum build [DD], built daily by BuildBot, & requires installation of LuCI

WRT3200ACM

WRT3200ACM WARNING
Bare minimum build [DD], built daily by BuildBot, & requires installation of LuCI

Linksys OEM Builds

Official Linksys OEM Firmware
Based on kernel versions 3.2.40 & 3.10.39

WRT1200AC

WRT1200AC

WRT1900AC

WRT1900AC

WRT1900ACS

WRT1900ACS

WRT3200ACM

WRT3200ACM

Third Party Builds

These are built, and maintained, by the parties listed

arokh

Repository Fully Customized Development [DD] Build (Released April 15, 2016; r49166)
Based on kernel version 4.4.6

Build Downloads Build Info Change Log sha256sums Must be installed either via sysupgrade -n or Serial

WRT1200AC

WRT1200AC
Full package repository, highly customized, intended to offer a complete OOBE [Out of Box Experience]

WRT1900AC

WRT1900AC
Full package repository, highly customized, intended to offer a complete OOBE [Out of Box Experience]

WRT1900ACS

WRT1900ACS
Full package repository, highly customized, intended to offer a complete OOBE [Out of Box Experience]

davidc502

Repository Moderately Customized Development [DD] Build (Released March 12th, 2017)
Based on kernel version 4.4.53

Build Downloads Build Info LEDE sha256sums OpenWrt sha256sums LEDE: Kernel 4.4.53

WRT1200AC

WRT1200AC
Full package repository, built for stability, containing latest Wifi Drivers, HW Buffer patches, extra packages, and "Modern Theme" Interface.

WRT1900AC

WRT1900AC
Full package repository, built for stability, containing latest Wifi Drivers, HW Buffer patches, extra packages, and "Modern Theme" Interface.

WRT1900ACS

WRT1900ACS
Full package repository, built for stability, containing latest Wifi Drivers, HW Buffer patches, extra packages, and "Modern Theme" Interface.

WRT3200ACM

WRT3200ACM WARNING
Full package repository, built for stability, containing latest Wifi Drivers, HW Buffer patches, extra packages, and "Modern Theme" Interface.

  • V1 (rango):
    • System Image: LEDE
    • Sysupgrade TAR: LEDE

LEDE

BuildBot GitHub Repository Minimal Development [DD] Daily Snapshot Build (Forked May 2016)
Based on kernel version 4.4.14

Build Downloads Build Info Changelog Docs sha256sums Should not be considered stable

WRT1200AC

WRT1200AC
Bare minimum build, requiring installation of LuCI, aiming for versatility & ease of customization, offering a set of building blocks

WRT1900AC

WRT1900AC
Bare minimum build, requiring installation of LuCI, aiming for versatility & ease of customization, offering a set of building blocks

WRT1900ACS

WRT1900ACS
Bare minimum build, requiring installation of LuCI, aiming for versatility & ease of customization, offering a set of building blocks

WRT3200ACM

WRT3200ACM WARNING
Bare minimum build, requiring installation of LuCI, aiming for versatility & ease of customization, offering a set of building blocks

Flashing Firmware

Synopsis

Always update firmware using a wired connection, never via WiFi
Failure to adhere to this substantially raises the probability you will brick your router

  • WiFi is disabled by default; SSIDs and passwords for the two [WiFi] radios will need to be set.
    • It's imperative the WiFi Security section is read prior to enabling WiFi
    • For best results, change the channels from Auto to actual channel numbers
      • 5gHz radios function best at channels in the 150 range
    • Antenna direction and angle matters for signal strength
      • Adjust antennas while viewing dB levels via WebGUI [Network → Wireless → Wireless Overview]
  • Network connection may need to be refreshed [release/renew IP] after a flash:
    • Unplug LAN cable, wait ~5s, and plug back in
  • Modem's memory may need to be cleared if internet connection is not restored:
    1. Unplug modem and router (~15s)
    2. Turn modem back on and wait for it to fully boot (~60s)
    3. Turn router back on.

OpenWrt >> OpenWrt

PuTTY PuTTY SSH Profile

Backup

LuCI

  1. Login to OpenWrt WebUI (Default IP: 192.168.1.1)
  2. Backup current configuration
    1. System → Backup/Flash Firmware → Generate Archive

CLI

  1. Login to OpenWrt via SSH (see DropBear HowTo)
    1. Linux/BSD: SSH client built in
    2. Windows: Download PuTTY & PuTTY Profile
      1. Putty Profile
        • Line 5: "HostName"="root@192.168.1.1"
        • Line 6: "LogFileName"="&Y.&M.&D-&T_putty.log"
        • Line 58: "PublicKeyFile"="C:\\Path\\To\\PuTTY\\Key.ppk"
      2. Merge profile into registry, open/reopen PuTTY, then load SSH.OpenWrt profile
  2. Create backup archive
    1. SSH Terminal:
      cd /tmp ; sysupgrade -b -v ./backup.tar.gz
      • -b = creates an archive [.tar.gz] of files specified in sysupgrade.conf, then exits.
      • -v = more verbose
  3. Copy backup archive from router to client machine
    1. Client Machine Terminal:
      pscp -r -i "C:\OpenWrt.ppk" -2 -scp -P 22 root@192.168.1.1:/tmp/backup.tar.gz "D:\Save\Directory"
      • -r = copy directories recursively
      • -i = private key file for user authentication
      • -2 = force use of particular SSH protocol version [2]
      • -scp = force use of SCP protocol
      • -P = connect to specified port
Flash

LuCI

  1. Login to OpenWrt WebUI (Default IP: 192.168.1.1)
  2. System → Backup/Flash Firmware → Flash New Firmware Image → Choose File
    1. Select Sysupgrade tarball [*.tar] (Stable, Development, or Third Party Builds)
  3. Untick Keep Settings, then select Flash Image

CLI

  1. Login to OpenWrt via SSH (see DropBear HowTo)
    1. Linux/BSD: SSH client built in
    2. Windows: Download PuTTY & PuTTY Profile
      1. Putty Profile
        • Line 5: "HostName"="root@192.168.1.1"
        • Line 6: "LogFileName"="&Y.&M.&D-&T_putty.log"
        • Line 58: "PublicKeyFile"="C:\\Path\\To\\PuTTY\\Key.ppk"
      2. Merge profile into registry, open/reopen PuTTY, then load SSH.OpenWrt profile
  2. Download/Upload firmware image to router
    • Download via SSH Terminal:
      cd /tmp ; opkg update ; opkg install wget ; wget Image-Link
      OR
    • Upload via Client Machine Terminal:
      pscp -r -i "C:\OpenWrt.ppk" -2 -scp -P 22 "D:\image.img" root@192.168.1.1:/tmp
      • -r = copy directories recursively
      • -i = private key file for user authentication
      • -2 = force use of particular SSH protocol version [2]
      • -scp = force use of SCP protocol
      • -P = connect to specified port
  3. Flash image
    1. SSH Terminal:
      cd /tmp ; sysupgrade -n -v image-name
      • -n = do not save configuration over reflash
      • -v = more verbose
Restore

LuCI

  1. Login to OpenWrt WebUI (Default IP: 192.168.1.1)
  2. System → Backup/Flash Firmware → Restore Backup → Choose File → Upload Archive…

CLI

  1. Login to OpenWrt via SSH (see DropBear HowTo)
    1. Linux/BSD: SSH client built in
    2. Windows: Download PuTTY & PuTTY Profile
      1. Putty Profile
        • Line 5: "HostName"="root@192.168.1.1"
        • Line 6: "LogFileName"="&Y.&M.&D-&T_putty.log"
        • Line 58: "PublicKeyFile"="C:\\Path\\To\\PuTTY\\Key.ppk"
      2. Merge profile into registry, open/reopen PuTTY, then load SSH.OpenWrt profile
  2. Copy backup archive from client machine to router
    1. Client Machine Terminal:
      pscp -r -i "C:\OpenWrt.ppk" -2 -scp -P 22 "D:\backup.tar.gz" root@192.168.1.1:/tmp
      • -r = copy directories recursively
      • -i = private key file for user authentication
      • -2 = force use of particular SSH protocol version [2]
      • -scp = force use of SCP protocol
      • -P = connect to specified port
  3. Restore backup archive
    1. SSH Terminal:
      cd /tmp ; sysupgrade -r -v backup.tar.gz
      • -r = restores an archive [.tar.gz] created with sysupgrade -b, then reboots.
      • -v = more verbose

OEM >> OpenWrt

PuTTY PuTTY SSH Profile

Backup

Backup Current Settings

  1. Login to Linksys WebUI (Default IP: 192.168.1.1; Password: admin)
  2. Backup Linksys OEM configuration: (to restore if reverting to OEM)
    1. TroubleshootingDiagnostics
    2. Router ConfigurationRestore ConfigurationBackup
Flash

Flash Image

  1. ConnectivityManual Update
  2. Select factory image [*.img] (Stable, Development, or Third Party Builds)
    1. Once flash completes, router will reboot
  3. If the image selected
    1. Has LuCI pre-installed:
    2. Does not have LuCI pre-installed:
        1. Linux/BSD: SSH client built in
        2. Windows: Download PuTTY & PuTTY Profile
          1. Putty Profile
            • Line 5: "HostName"="root@192.168.1.1"
        3. Merge profile into registry, open/reopen PuTTY, then load SSH.OpenWrt profile

OpenWrt >> OEM

PuTTY PuTTY SSH Profile

Prerequisite

If VLAN config was altered, it must be defaulted prior to flashing

  1. Login to OpenWrt via SSH
    1. Linux/BSD: SSH client built in
    2. Windows: Download PuTTY & PuTTY Profile
      1. Putty Profile
        • Line 5: "HostName"="root@192.168.1.1"
        • Line 6: "LogFileName"="&Y.&M.&D-&T_putty.log"
        • Line 58: "PublicKeyFile"="C:\\Path\\To\\PuTTY\\Key.ppk"
      2. Merge profile into registry, open/reopen PuTTY, then load SSH.OpenWrt profile
  2. Save the following to vlan.sh:
    #!/bin/sh
     
    swconfig dev switch0 set enable_vlan 0
    for port in 0 1 2 3 4 5 6; do
      swconfig dev switch0 port $port set qmode 0 
      swconfig dev switch0 port $port set pvid 0 
    done
  3. Run vlan.sh:
    chmod ./vlan.sh +x ; ./vlan.sh
Backup

LuCI

  1. Login to OpenWrt WebUI (Default IP: 192.168.1.1)
  2. Backup current configuration
    1. System → Backup/Flash Firmware → Generate Archive

CLI

  1. Login to OpenWrt via SSH (see DropBear HowTo)
    1. Linux/BSD: SSH client built in
    2. Windows: Download PuTTY & PuTTY Profile
      1. Putty Profile
        • Line 5: "HostName"="root@192.168.1.1"
        • Line 6: "LogFileName"="&Y.&M.&D-&T_putty.log"
        • Line 58: "PublicKeyFile"="C:\\Path\\To\\PuTTY\\Key.ppk"
      2. Merge profile into registry, open/reopen PuTTY, then load SSH.OpenWrt profile
  2. Create backup archive
    1. SSH Terminal:
      cd /tmp ; sysupgrade -b -v ./backup.tar.gz
      • -b = creates an archive [.tar.gz] of files specified in sysupgrade.conf, then exits.
      • -v = more verbose
  3. Copy backup archive from router to client machine
    1. Client Machine Terminal:
      pscp -r -i "C:\OpenWrt.ppk" -2 -scp -P 22 root@192.168.1.1:/tmp/backup.tar.gz "D:\Save\Directory"
      • -r = copy directories recursively
      • -i = private key file for user authentication
      • -2 = force use of particular SSH protocol version [2]
      • -scp = force use of SCP protocol
      • -P = connect to specified port
Flash

LuCI

  1. System → Backup/Flash Firmware → Flash New Firmware Image → Choose File
    1. Select Linksys image [*.img] (Linksys OEM Builds)
  2. Untick Keep Settings, then select Flash Image

CLI

  1. Login to OpenWrt via SSH (see DropBear HowTo)
    1. Linux/BSD: SSH client built in
    2. Windows: Download PuTTY & PuTTY Profile
      1. Putty Profile
        • Line 5: "HostName"="root@192.168.1.1"
        • Line 6: "LogFileName"="&Y.&M.&D-&T_putty.log"
        • Line 58: "PublicKeyFile"="C:\\Path\\To\\PuTTY\\Key.ppk"
      2. Merge profile into registry, open/reopen PuTTY, then load SSH.OpenWrt profile
  2. Download/Upload firmware image to router
    • Download via SSH Terminal:
      cd /tmp ; opkg update ; opkg install wget ; wget Image-Link
      OR
    • Upload via Client Machine Terminal:
      pscp -r -i "C:\OpenWrt.ppk" -2 -scp -P 22 "D:\image.img" root@192.168.1.1:/tmp
      • -r = copy directories recursively
      • -i = private key file for user authentication
      • -2 = force use of particular SSH protocol version [2]
      • -scp = force use of SCP protocol
      • -P = connect to specified port
  3. Flash image
    1. SSH Terminal:
      sysupgrade -n -v image-name
      • -n = do not save configuration over reflash
      • -v = more verbose

Bootloader

Serial Flash

Commands

USB instead of TFTP

Video Tutorials

Linux

Anyone wishing to make a video tutorial for Linux, please do so

Mac

TFTP Flash

contributed by: lifehacksback

HowTo: TFTP Flash

Windows

Anyone wishing to make a video tutorial for Windows, please do so

Troubleshooting

Bootlog

OEM

Armada XP

WRT1900AC v1
Kernel 3.2.40

BootROM 1.20 Booting from NAND flash Step 1: First phase of PEX-PIPE Configuration Step 2: Configure the desire PIN_PHY_GEN Step 3 QSGMII enable Step 4: Configure SERDES MUXes Step 5: Activate the RX High Impedance Mode Step 6: [PEX-Only] PEX-Main configuration (X4 or X1) Step 6.2: [PEX-Only] PCI Express Link Capabilities Step 7: [PEX-X4 Only] To create PEX-Link Steps 7,8,9,10 and 11 Steps 12: [PEX-Only] Last phase of PEX-PIPE Configuration Steps 13: Wait 15ms before checking results Steps 14: [PEX-Only] In order to configure Steps 15: [PEX-Only] In order to configure Steps 16: [PEX-Only] Training Enablestep 17: max_if= 0x7 step 17: PEX0 pexUnit= 0 ** Link is Gen1, check the EP capability --> 0050 mvPexConfigRead: return addr=0x%x0050 --> 7001 --> 7001 --> A005 --> A005 --> 0010 --> 4C12 Gen2 client! step 17: PEX1 pexUnit= 0 step 17: PEX2 pexUnit= 0 ** Link is Gen1, check the EP capability --> 0040 mvPexConfigRead: return addr=0x%x0040 --> 5001 --> 5001 --> 7005 --> 7005 --> 0010 --> DC12 Gen2 client! step 17: PEX3 pexUnit= 0 PEX3 : Detected No Link. Status Reg(0x0004DA64) = 0x00000001 step 17: PEX4 pexUnit= 1 PEX4 : Detected No Link. Status Reg(0x00081A64) = 0x00000001 step 17: PEX5 pexUnit= 1 PEX5 : Detected No Link. Status Reg(0x00085A64) = 0x00000001 step 17: PEX6 pexUnit= 1 PEX6 : Detected No Link. Status Reg(0x00089A64) = 0x00000001 DDR3 Training Sequence - Ver 4.5.DDR3 Training Sequence - Static MC Init DDR3 Training Sequence - HW Training Procedure DDR3 Training Sequence - Switching XBAR Window to FastPath Window BootROM: Image checksum verification PASSED __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2011.12 (Feb 06 2014 - 17:14:13) Marvell version: v2011.12 2013_Q1.2 Boot version:v1.3.25 Board: RD-AXP-GP rev 1.0 SoC: MV78230 B0 running 2 CPUs Custom configuration CPU: Marvell PJ4B (584) v7 (Rev 2) LE CPU 0 CPU @ 1200 [MHz] L2 @ 600 [MHz] TClock @ 250 [MHz] DDR @ 600 [MHz] DDR 32Bit Width, FastPath Memory Access DDR ECC Disabled DRAM: 256 MiB Map: Code: 0x0fea7000:0x0ff5e2d4 BSS: 0x0ffefd80 Stack: 0x0f9a6ef8 Heap: 0x0f9a7000:0x0fea7000 NAND: Spansion 1Gb(ID=F101) 128 MiB MMC: MRVL_MMC: 0 Bad block table found at page 65472, version 0x01 Bad block table found at page 65408, version 0x01 nand_read_bbt: Bad block at 0x000001ca0000 #### auto_recovery #### [u_env] get auto_recovery == yes [u_env] get auto_recovery == yes [u_env] get boot_part == 1 [u_env] get boot_part_ready == 3 auto_recovery enabled:1, boot_part:1, boot_part_ready:3 [boot_count_read] block:0x140000, size:256KB, records:128 [boot_count_read_record] boot_count:2, next_record:42 [boot_count_write] erase:0, auto_recovery->block_offset:0x140000 Updating boot_count ... [boot_count_write] offset:0x155000 , length:2048 done PEX 0.0(0): Root Complex Interface, Detected Link X1, GEN 2.0 PEX 0.1(1): Root Complex Interface, Detected Link X1, GEN 1.1 PEX 0.2(2): Root Complex Interface, Detected Link X1, GEN 2.0 PEX 0.3(3): Detected No Link. PEX 1.0(4): Detected No Link. PEX 1.1(5): Detected No Link. PEX 1.2(6): Detected No Link. boot_end Offset: 0x100000 u_env_off Offset: 0x100000 s_env_off Offset: 0x140000 devinfo Offset: 0x900000 =================== total_badCount: 0 boot_badCount: 0 u_env_badCount: 0 s_env_badCount: 0 buff_badCount: 0 =================== FPU initialized to Run Fast Mode. USB 0: Host Mode USB 1: Host Mode USB 2: Device Mode Modules Detected: mvEthE6171SwitchBasicInit finished Net: mvSysNetaInit enter set port 0 to rgmii enter set port 1 to rgmii enter egiga0 [PRIME], egiga1 modify Phy Status auto_recovery_check changes bootcmd: run nandboot Hit any key to stop autoboot: 0 NAND read: device 0 offset 0xa00000, size 0x400000 4194304 bytes read: OK ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux-3.2.40 Created: 2014-06-20 21:50:04 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3856032 Bytes = 3.7 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Booting Linux on physical CPU 0 Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.2.40 (root@build-vm) (gcc version 4.6.4 20120731 (prerelease) (Linaro GCC branch-4.6.4. Marvell GCC 201301-1645.aee66e26) ) #1 SMP Fri Jun 20 14 :49:46 PDT 2014 CPU: Marvell PJ4Bv7 Processor [562f5842] revision 2 (ARMv7), cr=10c53c7d CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Machine: Marvell Armada XP GP Board Using UBoot passing parameters structure Reserving training memory: base=0x (null) size=0x2800 Memory policy: ECC disabled, Data cache writealloc SMP: init cpus PERCPU: Embedded 7 pages/cpu @c09c7000 s6944 r8192 d13536 u32768 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 Kernel command line: console=ttyS0,115200 mtdparts=armada-nand:1024K(uboot)ro,256K(u_env),256K(s_env),1m@9m(devinfo),40m@10m(kernel),37m@13m(rootfs),40m@50m(alt _kernel),37m@53m(alt_rootfs),80m@10m(ubifs),-@90m(syscfg) root=/dev/mtdblock5 ro rootfstype=jffs2 init=/sbin/init PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) allocated 1048576 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Memory: 256MB = 256MB total Memory: 250768k/250768k available, 11376k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0xd0800000 - 0xfa800000 ( 672 MB) lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc06fcf4c (7124 kB) .init : 0xc06fd000 - 0xc0733b20 ( 219 kB) .data : 0xc0734000 - 0xc076fb80 ( 239 kB) .bss : 0xc076fba4 - 0xc07c3f28 ( 337 kB) Hierarchical RCU implementation. RCU debugfs-based tracing is enabled. NR_IRQS:211 Initializing ArmadaXP SOC Timer 0 sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798ms Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 Initializing cgroup subsys debug Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys blkio CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 SMP: prepare CPUs (4 cores) Setting Clocks for secondary CPUs Armada-XP Performance Monitor Unit detected (Marvell ID)!!! hw perfevents: enabled with Armada PJ4 PMU driver, 7 counters available SMP: CPU 0 Waking up CPU 1 CPU1: Booted secondary processor CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Brought up 2 CPUs SMP: Total of 2 processors activated (2382.23 BogoMIPS). devtmpfs: initialized xor: measuring software checksum speed arm4regs : 1159.600 MB/sec 8regs : 864.800 MB/sec 32regs : 1066.000 MB/sec xor: using function: arm4regs (1159.600 MB/sec) NET: Registered protocol family 16 Aurora: Working in ARMv7 mode L0 cache Enabled Speculative Prefetch Disabled Aurora L2 Cache Enabled Support IO coherency. Marvell Armada-XP RD-AXP-GP rev 1.0 Board - Soc: MV78230 B0 LE Detected Tclk 250000000, SysClk 600000000, FabricClk 600000000, PClk 1200000000 LSP version: linux-3.2.y-2013_Q1.2p2 - WIFI_RD RC registered dev#0 asa ehci_marvell Marvell USB EHCI Host controller #0: cf8b4a00 registered dev#1 asa ehci_marvell Marvell USB EHCI Host controller #1: cf8b4800 registered dev#2 asa mv_udc Marvell USB Gadget controller #2: cf8b4600 bio: create slab <bio-0> at 0 raid6: int32x1 137 MB/s raid6: int32x2 211 MB/s raid6: int32x4 208 MB/s raid6: int32x8 243 MB/s raid6: using algorithm int32x8 (243 MB/s) vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new interface driver ethub usbcore: registered new device driver usb Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc. Switching to clocksource axp_clocksource NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered UDP hash table entries: 128 (order: 0, 4096 bytes) UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI-E: Cheking physical bus #0 (controller #0): Enabled - Link UP PCI-E: Cheking physical bus #1 (controller #1): Enabled - Link UP PCI-E: Cheking physical bus #2 (controller #2): Enabled - Link UP PCI-E: Cheking physical bus #3 (controller #3): Enabled - No Link PCI-E: Cheking physical bus #4 (controller #4): Enabled - No Link PCI-E: Cheking physical bus #5 (controller #5): Enabled - No Link PCI-E: Cheking physical bus #6 (controller #6): Enabled - No Link PCI: bus0: Fast back to back transfers disabled PCI: bus1: Fast back to back transfers disabled PCI: bus2: Fast back to back transfers disabled pci 0000:02:00.0: BAR 0: assigned [mem 0xf2400000-0xf24fffff 64bit pref] pci 0000:02:00.0: BAR 0: set to [mem 0xf2400000-0xf24fffff 64bit pref] (PCI address [0xf2400000-0xf24fffff]) pci 0000:02:00.0: BAR 2: assigned [mem 0xf2500000-0xf25fffff 64bit pref] pci 0000:02:00.0: BAR 2: set to [mem 0xf2500000-0xf25fffff 64bit pref] (PCI address [0xf2500000-0xf25fffff]) pci 0000:01:00.0: BAR 0: assigned [mem 0xf2200000-0xf22fffff 64bit pref] pci 0000:01:00.0: BAR 0: set to [mem 0xf2200000-0xf22fffff 64bit pref] (PCI address [0xf2200000-0xf22fffff]) pci 0000:01:00.0: BAR 2: assigned [mem 0xf2300000-0xf23fffff 64bit pref] pci 0000:01:00.0: BAR 2: set to [mem 0xf2300000-0xf23fffff 64bit pref] (PCI address [0xf2300000-0xf23fffff]) pci 0000:00:00.0: BAR 0: assigned [mem 0xf2000000-0xf2007fff 64bit] pci 0000:00:00.0: BAR 0: set to [mem 0xf2000000-0xf2007fff 64bit] (PCI address [0xf2000000-0xf2007fff]) cesadev_init(c0704a94) mvCesaInit: channels=2, session=640, queue=64 Armada XP hwmon thermal sensor initialized. ArmadaXP Power Managament Suspend Operations Initialized Initializing Armada-XP CPU power management (WFI) squashfs: version 4.0 (2009/01/31) Phillip Lougher nfs4filelayout_init: NFSv4 File Layout Driver Registering... JFFS2 version 2.2. (NAND) B) 2001-2006 Red Hat, Inc. SGI XFS with security attributes, large block/inode numbers, no debug enabled msgmni has been set to 489 async_tx: api initialized (async) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Initializing ths8200_init mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) mv_xor mv_xor.2: Marvell XOR: ( xor ) mv_xor mv_xor.3: Marvell XOR: ( fill cpy ) HDLC line discipline maxframe=4096 N_HDLC line discipline registered. Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 41) is a 16550A console [ttyS0] enabled loop: module loaded sata_mv sata_mv.0: cannot get clkdev sata_mv sata_mv.0: slots 32 ports 2 scsi0 : sata_mv scsi1 : sata_mv ata1: SATA max UDMA/133 irq 55 ata2: SATA max UDMA/133 irq 55 INFO: Found cfi_flash_0 0 - base 0xf4000000, size 0x2000000, bus 2 INFO: Found spi_flash 0 - base 0xf6000000, size 0x1000000 INFO: flashInfoFill - Found 2 Flash Devices INFO: flash_map_init - detected 2 devices MTD: Initialize the cfi_flash_0 device at address 0xf4000000 INFO: Io remapped successfully - phy addr = 0xf4000000, virt addr = 0xd1000000 INFO: Using cfi_probe to probe cfi_flash_0 at address 0xf4000000, size 0x2000000, width 2m - Not detected - FAILED! MTD: Initialize the spi_flash device at address 0xf6000000 INFO: Io remapped successfully - phy addr = 0xf6000000, virt addr = 0xd4000000 INFO: Using sflash to probe spi_flash at address 0xf6000000, size 0x1000000, width 2mmvSFlashInit ERROR: Unknown SPI flash device! ERROR: sflash_probe - Failed to initialize the SFlash. - Not detected - FAILED! armada-nand armada-nand.0: Initialize HAL based NFC in 8bit mode with DMA Disabled using BCH 4bit ECC NAND Spansion 1Gb(ID=F101) NAND device: Manufacturer ID: 0x01, Chip ID: 0xf1 (AMD NAND 128MiB 3,3V 8-bit) Bad block table found at page 65472, version 0x01 Bad block table found at page 65408, version 0x01 nand_read_bbt: bad block at 0x000001ca0000 10 cmdlinepart partitions found on MTD device armada-nand 10 cmdlinepart partitions found on MTD device armada-nand Creating 10 MTD partitions on "armada-nand": 0x000000000000-0x000000100000 : "uboot" 0x000000100000-0x000000140000 : "u_env" 0x000000140000-0x000000180000 : "s_env" 0x000000900000-0x000000a00000 : "devinfo" 0x000000a00000-0x000003200000 : "kernel" 0x000000d00000-0x000003200000 : "rootfs" 0x000003200000-0x000005a00000 : "alt_kernel" 0x000003500000-0x000005a00000 : "alt_rootfs" 0x000000a00000-0x000005a00000 : "ubifs" 0x000005a00000-0x000008000000 : "syscfg" mv_eth_probe: port_mask=0xf, cpu_mask=0x3 mvPncVirtBase = 0xd0a00000 o 4 Giga ports supported o SKB recycle supported (Enabled) o NETA acceleration mode 3 o PnC supported (Enabled) o RX Queue support: 8 Queues * 128 Descriptors o TX Queue support: 8 Queues * 532 Descriptors o GSO supported o GRO supported o Receive checksum offload supported o Transmit checksum offload supported o Driver ERROR statistics enabled o Loading Switch QuarterDeck driver o Device ID : 0x172 o No. of Ports : 7 o CPU Port : 5 o Loading network interface(s) o Port 0 is connected to Linux netdevice giga p=0: mtu=1500, mac=cf833eec o eth0, ifindex = 2, GbE port = 0 o Port 1 is connected to Linux netdevice giga p=1: mtu=1500, mac=cf833eec o eth1, ifindex = 3, GbE port = 1 o Warning: GbE port 2 is powered off tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k e1000e: Copyright(c) 1999 - 2011 Intel Corporation. sky2: driver version 1.30 PPP generic driver version 2.4.2 PPP BSD Compression module registered PPP Deflate Compression module registered NET: Registered protocol family 24 PPTP driver version 0.8.5 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_marvell ehci_marvell.0: Marvell Orion EHCI ehci_marvell ehci_marvell.0: new USB bus registered, assigned bus number 1 ata1: SATA link down (SStatus 0 SControl F300) ehci_marvell ehci_marvell.0: irq 45, io base 0xfbc50100 ehci_marvell ehci_marvell.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ehci_marvell ehci_marvell.1: Marvell Orion EHCI ehci_marvell ehci_marvell.1: new USB bus registered, assigned bus number 2 ehci_marvell ehci_marvell.1: irq 46, io base 0xfbc51100 ehci_marvell ehci_marvell.1: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected PCI: enabling device 0000:00:00.0 (0140 -> 0142) etxhci_hcd_130530 0000:00:00.0: Etron xHCI Host Controller etxhci_hcd_130530 0000:00:00.0: new USB bus registered, assigned bus number 3 etxhci_hcd_130530 0000:00:00.0: irq 58, io mem 0xf2000000 ethub 3-0:1.0: USB hub found ethub 3-0:1.0: 2 ports detected etxhci_hcd_130530 0000:00:00.0: Etron xHCI Host Controller etxhci_hcd_130530 0000:00:00.0: new USB bus registered, assigned bus number 4 ethub 4-0:1.0: USB hub found ethub 4-0:1.0: 2 ports detected mousedev: PS/2 mouse device common for all mice ata2: SATA link down (SStatus 0 SControl F300) rtc-mv rtc-mv: internal RTC not ticking i2c /dev entries driver md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 cpuidle: using governor ladder cpuidle: using governor menu mmc0: mvsdio driver initialized, lacking card detect (fall back to polling) oprofile: using arm/mrvl_pj4b u32 classifier Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (3918 buckets, 15672 max) ctnetlink v0.93: registering with nfnetlink. nf_conntrack_rtsp v0.6.21 loading GRE over IPv4 demultiplexor driver GRE over IPv4 tunneling driver nf_nat_rtsp v0.6.21 loading ip_tables: (C) 2000-2006 Netfilter Core Team arp_tables: (C) 2002 David S. Miller TCP cubic registered NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Bridge firewalling registered Ebtables v2.0 registered L2TP core driver, V2.0 PPPoL2TP kernel driver, V2.0 8021q: 802.1Q VLAN Support v1.8 Registering the dns_resolver key type VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000000: 0x43e4 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000004: 0x6723 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000008: 0xe316 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000000c: 0x0c38 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000010: 0xf54b instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000014: 0x79d2 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000018: 0x9261 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000001c: 0xd368 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000020: 0x1879 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000024: 0xcacb instead Further such events for this erase block will not be printed Old JFFS2 bitmask found at 0x000052bc You cannot use older JFFS2 filesystems with newer kernels jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020000: 0x9780 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020004: 0x9cba instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020008: 0xba9f instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002000c: 0x1856 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020010: 0x4657 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020014: 0x9ea2 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020018: 0xf1fa instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002001c: 0x0856 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020020: 0xf16e instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020024: 0xf34d instead Further such events for this erase block will not be printed jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040000: 0x7bc9 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040004: 0x2b77 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040008: 0x0a1d instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0004000c: 0x3013 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040010: 0x62ae instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040014: 0x789b instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040018: 0x46c8 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0004001c: 0xd4fa instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040020: 0xe3f5 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040024: 0xb870 instead Further such events for this erase block will not be printed jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060000: 0xd224 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060004: 0xff7c instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060008: 0xe6b4 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0006000c: 0x1c3e instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060010: 0x87c9 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060014: 0xff53 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060018: 0x1f3f instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0006001c: 0xbbbb instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060020: 0x9fc7 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060024: 0xf28f instead Further such events for this erase block will not be printed jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080000: 0x5721 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080004: 0xbfd6 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080008: 0x3d7e instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0008000c: 0xfbaa instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080010: 0xcf91 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080014: 0xbbe0 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080018: 0xceeb instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0008001c: 0x75cb instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080020: 0xbfd7 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080024: 0xa7e8 instead Further such events for this erase block will not be printed jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0000: 0x9ba6 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0004: 0x42aa instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0008: 0x599a instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a000c: 0x1038 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0010: 0xff8f instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0014: 0x2cd4 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0018: 0xa950 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a001c: 0xfc7f instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0020: 0x6665 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0024: 0xbf48 instead Further such events for this erase block will not be printed jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01600000: 0x4c2e instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01600004: 0x534b instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01600008: 0x302e instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0160000c: 0x3030 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01600010: 0x5741 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01600014: 0x3931 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01600018: 0x4341 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0160001c: 0x2020 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01600020: 0x3246 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01600024: 0x3435 instead Further such events for this erase block will not be printed VFS: Mounted root (jffs2 filesystem) readonly on device 31:5. devtmpfs: mounted Freeing init memory: 216K ********************************************************************************* _ _ __ _ __ _____ __ __ _____ | | | || \ | | / // ____]\ \ / // ____]TM | | | || \ | | / /| (___ \ V /| (____ | | | || |\ \| |\ \ \____ \ \ / \____ \ | |_____ | || | \ | \ \ ____) | | | ____) | |_______||_||_| \__| \_\[____ / |_| [_____/ (c) 2013 Belkin International, Inc. and/or its affiliates. All rights reserved. Booting blk-mamba (firmware version 1.1.8.161917) ********************************************************************************* [utopia][init] System Initialization [utopia][init] Creating /proc [utopia][init] Creating /sys [utopia][init] Creating /dev [utopia][init] Creating /tmp [utopia][init] Allocating 50M for /tmp [utopia][init] Prepairing /dev/pts [utopia][init] Setting /tmp and /var permissions [utopia][init] Starting udev.. bdutil board utility kernel module, version 1.4 bdutil board utility kernel module boardId (9) bdutil board utility gpio kernel module, version 1.3 bdutil board utility buttons kernel module, version 1.4 bdutil board utility LEDs kernel module, version 2.5 mod_bdutil (leds): i2c-dev (0) LEDs driver initialized Attempting mount of ubifs syscfg partition UBI device number 0, total 296 LEBs (37584896 bytes, 35.8 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB) [utopia][init] Using persistent syscfg data from /var/config/syscfg [utopia][init] Starting system logging [utopia][init] Starting sysevent subsystem net.netfilter.nf_conntrack_acct = 1 watchdog running [utopia][init] Setting any unset system values to default [utopia][init] no persistence config file (/var/config/pstcfg) found mac_setup.sh, setting up MAC addresses for all interfaces based on 94:10:3E:9F:CE:4B Updating NTP Servers if necessary checking for interactive script start up... 0x9000000 0x1000000 0xa000000 0x1000000 0xb000000 0x1000000 0xc000000 0x1000000 0xd000000 0x1000000 0xe000000 0x1000000 0xf000000 0x1000000 0x10000000 0x1000000 0x11000000 0x1000000 0x12000000 0x1000000 0x13000000 0x1000000 0x14000000 0x1000000 0x15000000 0x1000000 0x16000000 0x1000000 0x17000000 0x1000000 Updating BootCount Page[43]:15800 ... Done [utopia][init] Starting bdutil daemon BDUTIL daemon mode attempting to sync sysinfo.cgi auth credentials cpu temp monitor created Thu Oct 11 06:00:00 UTC 2012 wdev0 no private ioctls. wdev1 no private ioctls. 0x21010000 0x1000000 0x3c010000 0x1000000 wdev0ap0 no private ioctls. wdev0ap1 no private ioctls. wdev0ap2 no private ioctls. wdev0ap3 no private ioctls. wdev1ap0 no private ioctls. wdev1ap1 no private ioctls. wdev1ap2 no private ioctls. 0x3d010000 0x1000000 wifi, sysevent received: lan-started (Wed Oct 10 23:00:03 PDT 2012) wifi, service_start() Lighttpd Model Base: WRT1900AC Generating Rainier lighttpd config Build temporary www configuration directory: TSLIIHauhEfGE reset LAN ethernet port Failed to modify password entry for user guest Registering Service myrouter._http._tcp.local port 80 [utopia] Not setting ppp_clamp_mtu Got a reply for myrouter._http._tcp.local.: Name now registered and active wifi, wifi_physical_start(wdev0) [utopia] Not setting ppp_clamp_mtu on dslite protocol wifi_physical, iwconfig wdev0 commit Restarting nfqrecv service... wifi, wifi_virtual_start(wdev0) wifi, wifi_user_start(wdev0) wifi, primary AP: wdev0ap0 is up wifi, wifi_guest_start(wdev0) wifi, guest wdev0ap1 is disabled, do not start wifi guest wifi, wifi_physical_start(wdev1) wifi_physical, iwconfig wdev1 commit wifi, wifi_virtual_start(wdev1) wifi, wifi_user_start(wdev1) wifi, primary AP: wdev1ap0 is up wifi, wifi_guest_start(wdev1) wifi, guest wdev1ap1 is disabled, do not start wifi guest wifi, start_hostapd() Configuration file: /tmp/hostapd-wdev0ap0.conf Using interface wdev0ap0 with hwaddr 94:10:3e:9f:ce:4c and ssid 'Linksys01799' Configuration file: /tmp/hostapd-wdev1ap0.conf Using interface wdev1ap0 with hwaddr 94:10:3e:9f:ce:4d and ssid 'Linksys01799_5GHz' Failed to modify password entry for user guest Failed to modify password entry for user guest Starting smbd ...

Armada 385

WRT1900ACS
Kernel 3.10.39

BootROM - 1.73 Booting from NAND flash General initialization - Version: 1.0.0 Detected Device ID 6820 High speed PHY - Version: 2.0 Init RD NAS topology Serdes Lane 3 is USB3 Serdes Lane 4 is SGMII board SerDes lanes topology details: | Lane # | Speed | Type | -------------------------------- | 0 | 06 | SATA0| | 1 | 05 | PCIe0| | 2 | 06 | SATA1| | 3 | 05 | USB3 HOST1| | 4 | 05 | PCIe1| | 5 | 00 | SGMII2| -------------------------------- :** Link is Gen1, check the EP capability PCIe, Idx 0: Link upgraded to Gen2 based on client cpabilities :** Link is Gen1, check the EP capability PCIe, Idx 1: remains Gen1 High speed PHY - Ended Successfully DDR3 Training Sequence - Ver TIP-1.26.0 mvSysEnvGetTopologyUpdateInfo: TWSI Read failed DDR3 Training Sequence - Switching XBAR Window to FastPath Window DDR3 Training Sequence - Ended Successfully Not detected suspend to RAM indication BootROM: Image checksum verification PASSED __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2013.01 (Mar 27 2015 - 16:50:46) Marvell version: 2014_T3.0p6 Boot version : v1.0.13 Board: RD-NAS-88F6820-DDR3 SoC: MV88F6820 Rev A0 running 2 CPUs CPU: ARM Cortex A9 MPCore (Rev 1) LE CPU 0 CPU @ 1600 [MHz] L2 @ 800 [MHz] TClock @ 200 [MHz] DDR @ 800 [MHz] DDR 32 Bit Width, FastPath Memory Access, DLB Enabled, ECC Disabled DRAM: 512 MiB Map: Code:0x1fea9000:0x1ff7632c BSS:0x1ffef6b4 Stack:0x1f9a8f20 Heap:0x1f9a9000:0x1fea9000 raise: Signal # 8 caught U-ENV offset == 0x200000 raise: Signal # 8 caught U-ENV offset == 0x200000 U-Boot Environment:0x00200000:0x00220000 (NAND) NAND: 128 MiB MMC: mv_sdh: 0 DEVINFO offset == 0x900000 U-ENV offset == 0x200000 U-ENV offset == 0x200000 S-ENV offset == 0x240000 #### auto_recovery #### [u_env] get auto_recovery == yes [u_env] get auto_recovery == yes [u_env] get boot_part == 1 [u_env] get boot_part_ready == 3 auto_recovery enabled:1, boot_part:1, boot_part_ready:3 S-ENV offset == 0x240000 [boot_count_read] block:0x240000, size:128KB, records:64 [boot_count_read_record] boot_count:0, next_record:14 [boot_count_write] erase:0, auto_recovery->block_offset:0x240000 offset=0x247000 Updating boot_count ... [boot_count_write] offset:0x247000 , length:2048 done PCI-e 0 (IF 0 - bus 0) Root Complex Interface, Detected Link X1, GEN 2.0 PCI-e 1 (IF 1 - bus 1) Root Complex Interface, Detected Link X1, GEN 1.1 USB2.0 0: Host Mode USB3.0 1: Host Mode USB3.0 0: Host Mode Board configuration detected: mvEthE6171SwitchBasicInit init Net: | port | Interface | PHY address | |--------|-----------|--------------| | egiga0 | RGMII | 0x01 | | egiga1 | SGMII | 0x00 | egiga0 [PRIME], egiga1 auto_recovery_check changes bootcmd: run nandboot Hit any key to stop autoboot: 3 2 1 0 NAND read: device 0 offset 0xa00000, size 0x600000 6291456 bytes read: OK ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linksys WRT1900ACS Router Created: 2016-05-26 22:54:51 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4232779 Bytes = 4 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Booting Linux on physical CPU 0x0 Linux version 3.10.39 (root@build-vm) (gcc version 4.6.4 (Linaro GCC branch-4.6.4. Marvell GCC Dev 201310-2126.3d181f66 64K MAXPAGESIZE ALIGN) ) #1 SMP Thu May 26 15:54:39 PDT 2016 CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: Marvell Armada 380/381/382/385/388 (Device Tree), model: Marvell Armada 385 Development Board bootconsole [earlycon0] enabled Memory policy: ECC disabled, Data cache writealloc PERCPU: Embedded 7 pages/cpu @c100b000 s8000 r8192 d12480 u32768 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 Kernel command line: console=ttyS0,115200 root=/dev/mtdblock5 ro rootdelay=1 rootfstype=jffs2 earlyprintk mtdparts=armada-nand:2048K(uboot)ro,256K(u_env),256K(s_env),1m@9m(devinfo),40m@10m(kernel),34m@16m(rootfs),40m@50m(alt_kernel),34m@56m(alt_rootfs),80m@10m(ubifs),-@90m(syscfg) PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) allocated 1048576 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Memory: 512MB = 512MB total Memory: 509744k/509744k available, 14544k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0xe0800000 - 0xfff00000 ( 503 MB) lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc0765d7c (7544 kB) .init : 0xc0766000 - 0xc07a5f40 ( 256 kB) .data : 0xc07a6000 - 0xc07f5220 ( 317 kB) .bss : 0xc07f5220 - 0xc08abe50 ( 732 kB) Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. NR_IRQS:16 nr_irqs:16 16 LSP version: linux-3.10.39-2014_T3.0p5 sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798ms L310 cache controller enabled l2x0: 16 ways, CACHE_ID 0x410054c9, AUX_CTRL 0x16070000, Cache size: 1048576 B Console: colour dummy device 80x30 Calibrating delay loop... 3188.32 BogoMIPS (lpj=15941632) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 Initializing cgroup subsys memory CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0xc05a2888 - 0xc05a28e0 mvebu-pmsu: Initializing Power Management Service Unit Initializing CPU Reset module CPU1: Booted secondary processor CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Brought up 2 CPUs SMP: Total of 2 processors activated (6384.02 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4 xor: measuring software checksum speed arm4regs : 2836.800 MB/sec 8regs : 1915.600 MB/sec 32regs : 1633.600 MB/sec xor: using function: arm4regs (2836.800 MB/sec) pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations irq: Cannot allocate irq_descs @ IRQ195, assuming pre-allocated irq: Cannot allocate irq_descs @ IRQ227, assuming pre-allocated bio: create slab <bio-0> at 0 raid6: int32x1 203 MB/s raid6: int32x2 294 MB/s raid6: int32x4 374 MB/s raid6: int32x8 380 MB/s raid6: using algorithm int32x8 (380 MB/s) raid6: using intx1 recovery algorithm mvebu-pcie pcie-controller.6: PCIe0.0: link up mvebu-pcie pcie-controller.6: PCIe1.0: link up mvebu-pcie pcie-controller.6: ignoring PCIe DT node, missing pcie-port property mvebu-pcie pcie-controller.6: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe8000000] pci_bus 0000:00: root bus resource [bus 00-ff] PCI: bus0: Fast back to back transfers disabled pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring PCI: bus1: Fast back to back transfers disabled PCI: bus2: Fast back to back transfers disabled pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe01fffff] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0200000-0xe03fffff] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64bit pref] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0100000-0xe01fffff 64bit pref] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe01fffff] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0200000-0xe02fffff 64bit pref] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0300000-0xe03fffff 64bit pref] pci 0000:00:02.0: PCI bridge to [bus 02] pci 0000:00:02.0: bridge window [mem 0xe0200000-0xe03fffff] PCI: enabling device 0000:00:01.0 (0140 -> 0143) PCI: enabling device 0000:00:02.0 (0140 -> 0143) vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized Switching to clocksource armada_370_xp_clocksource cfg80211: Calling CRDA to update world regulatory domain NET: Registered protocol family 2 TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 3, 32768 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP: reno registered UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. jffs2: version 2.2. (NAND) (SUMMARY) ɠ2001-2006 Red Hat, Inc. fuse init (API version 7.22) msgmni has been set to 995 async_tx: api initialized (async) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver mv_xor f1060800.xor: Marvell shared XOR driver mv_xor f1060800.xor: Marvell XOR: ( xor cpy intr ) mv_xor f1060800.xor: freeing 1 in use descriptors! mv_xor f1060800.xor: Marvell XOR: ( crc32c ) mv_xor f1060900.xor: Marvell shared XOR driver mv_xor f1060900.xor: Marvell XOR: ( xor cpy intr ) mv_xor f1060900.xor: freeing 1 in use descriptors! mv_xor f1060900.xor: Marvell XOR: ( crc32c ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 44) is a 16550A console [ttyS0] enabled, bootconsole disabled console [ttyS0] enabled, bootconsole disabled ahci_mv f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode ahci_mv f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs scsi0 : ahci_mv_platform scsi1 : ahci_mv_platform ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 58 ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 58 armada-nand f10d0000.nand: Initialize HAL based NFC in 8bit mode with DMA Disabled using BCH 4bit ECC NAND device: Manufacturer ID: 0x01, Chip ID: 0xf1 (AMD/Spansion NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64 Bad block table found at page 65472, version 0x01 Bad block table found at page 65408, version 0x01 10 cmdlinepart partitions found on MTD device armada-nand Creating 10 MTD partitions on "armada-nand": 0x000000000000-0x000000200000 : "uboot" 0x000000200000-0x000000240000 : "u_env" 0x000000240000-0x000000280000 : "s_env" 0x000000900000-0x000000a00000 : "devinfo" 0x000000a00000-0x000003200000 : "kernel" 0x000001000000-0x000003200000 : "rootfs" 0x000003200000-0x000005a00000 : "alt_kernel" 0x000003800000-0x000005a00000 : "alt_rootfs" 0x000000a00000-0x000005a00000 : "ubifs" 0x000005a00000-0x000008000000 : "syscfg" bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> SoC: model = 0x6820, revision = 0x4 mvPncVirtBase = 0xe0c00000, pncTcamSize = 1024 o 3 Giga ports supported o SKB recycle supported (Disabled) o NETA acceleration mode 4 o BM supported for CPU: 4 BM pools o PnC supported (Enabled) o RX Queue support: 8 Queues * 256 Descriptors o TX Queue support: 8 Queues * 532 Descriptors o GSO supported o Receive checksum offload supported o Transmit checksum offload supported port #0: is_sgmii=0, is_rgmii=1, phy_addr=0 o Loading network interface(s) for port #0: cpu_mask=0x3, tx_csum_limit=9800 o Port 0 is connected to Linux netdevice o eth0, ifindex = 3, GbE port = 0 giga p=0: mtu=1500, mac=14:91:82:29:a2:8b (hw config) port #2: is_sgmii=1, is_rgmii=0, phy_addr=1 o Loading network interface(s) for port #2: cpu_mask=0x3, tx_csum_limit=2048 o Port 2 is connected to Linux netdevice o eth1, ifindex = 4, GbE port = 2 giga p=2: mtu=1500, mac=8e:4a:93:71:ed:9b (random) o Loading Switch QuarterDeck driver o Device ID : 0x176 o No. of Ports : 7 o CPU Port : 5 Switch driver init: o preset mode = Transparent o tag mode = No Tag port #0 establish switch connection libphy: orion_mdio_bus: probed mdio_bus f1072004.mdio-mi: cannot get PHY at address 0 mdio_bus f1072004.mdio-mi: cannot get PHY at address 1 PPP generic driver version 2.4.2 PPP BSD Compression module registered PPP Deflate Compression module registered NET: Registered protocol family 24 PPTP driver version 0.8.5 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-orion: EHCI orion driver orion-ehci f1058000.usb: EHCI Host Controller orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1 orion-ehci f1058000.usb: irq 50, io mem 0xf1058000 orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ata2: SATA link down (SStatus 0 SControl 300) ata1: SATA link down (SStatus 0 SControl 300) xhci-hcd f10f0000.usb3: xHCI Host Controller xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2 xhci-hcd f10f0000.usb3: irq 48, io mem 0xf10f0000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected xhci-hcd f10f0000.usb3: xHCI Host Controller xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected xhci-hcd f10f8000.usb3: xHCI Host Controller xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4 xhci-hcd f10f8000.usb3: irq 49, io mem 0xf10f8000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 1 port detected xhci-hcd f10f8000.usb3: xHCI Host Controller xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5 hub 5-0:1.0: USB hub found hub 5-0:1.0: 1 port detected mvebu-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0 i2c /dev entries driver md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 cpuidle: using governor ladder sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA sdhci-pltfm: SDHCI platform and OF driver helper armada-cesa-ocf f109d000.crypto: mv_get_cesa_resources: Total CESA HW channels supported 2 armada-cesa-ocf f109d000.crypto: mv_get_cesa_resources: CESA feature: int_coalescing(1) armada-cesa-ocf f109d000.crypto: mv_get_cesa_resources threshold 0x2, threshold_time 0xff mvCesaInit: channels=2, session=640, queue=256 armada-cesa-ocf f109d000.crypto: cesa_ocf_probe: CESA driver operate in ocf(0) mode cesadev_init(c07821d0) usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 26 u32 classifier Netfilter messages via NETLINK v0.30. nfnl_acct: registering with nfnetlink. nf_conntrack version 0.5.0 (7964 buckets, 31856 max) ctnetlink v0.93: registering with nfnetlink. nf_conntrack_rtsp v0.7 loading ipip: IPv4 over IPv4 tunneling driver gre: GRE over IPv4 demultiplexor driver ip_gre: GRE over IPv4 tunneling driver nf_nat_rtsp v0.7 loading ip_tables: (C) 2000-2006 Netfilter Core Team arp_tables: (C) 2002 David S. Miller TCP: cubic registered NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Bridge firewalling registered Ebtables v2.0 registered l2tp_core: L2TP core driver, V2.0 l2tp_ppp: PPPoL2TP kernel driver, V2.0 8021q: 802.1Q VLAN Support v1.8 Key type dns_resolver registered VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 Port 0: Link-up, Full-duplex, Speed-1000Mbps. Port 1: Link-up, Full-duplex, Speed-1000Mbps. Port 2: Link-up, Full-duplex, Speed-1000Mbps. Port 3: Link-up, Full-duplex, Speed-1000Mbps. Port 4: Link-up, Full-duplex, Speed-1000Mbps. input: gpio_keys.4 as /devices/soc.0/internal-regs.1/gpio_keys.4/input/input0 mvebu-rtc f10a3800.rtc: setting system clock to 1970-01-01 00:00:01 UTC (1) Waiting 1sec before mounting root device... md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01760000: 0x4c2e instead jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01760004: 0x534b instead jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01760008: 0x302e instead jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0176000c: 0x3030 instead jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01760010: 0x5742 instead jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01760014: 0x3931 instead jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01760018: 0x4341 instead jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0176001c: 0x2020 instead jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01760020: 0x3432 instead jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01760024: 0x4531 instead jffs2: Further such events for this erase block will not be printed VFS: Mounted root (jffs2 filesystem) readonly on device 31:5. devtmpfs: mounted Freeing unused kernel memory: 252K (c0766000 - c07a5000) ********************************************************************************* _ _ __ _ __ _____ __ __ _____ | | | || \ | | / // ____]\ \ / // ____]TM | | | || \ | | / /| (___ \ V /| (____ | | | || |\ \| |\ \ \____ \ \ / \____ \ | |_____ | || | \ | \ \ ____) | | | ____) | |_______||_||_| \__| \_\[____ / |_| [_____/ (c) 2014 Belkin International, Inc. and/or its affiliates. All rights reserved. Booting shelby (firmware version 1.0.0.172978) ********************************************************************************* [utopia][init] System Initialization [utopia][init] Creating /proc [utopia][init] Creating /sys [utopia][init] Creating /dev [utopia][init] Creating /tmp [utopia][init] Allocating 100M for /tmp [utopia][init] Prepairing /dev/pts [utopia][init] Setting /tmp and /var permissions [utopia][init] Starting udev.. usb 5-1: new SuperSpeed USB device number 2 using xhci-hcd usb 5-1: Parent hub missing LPM exit latency info. Power management will be impacted. orion_wdt: Initial timeout 171 sec Attempting mount of ubifs syscfg partition UBI device number 0, total 296 LEBs (37584896 bytes, 35.8 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB) [utopia][init] Using persistent syscfg data from /var/config/syscfg [utopia][init] Starting system logging [utopia][init] Starting sysevent subsystem net.netfilter.nf_conntrack_acct = 1 watchdog running [utopia][init] Setting any unset system values to default [utopia][init] no persistence config file (/var/config/pstcfg) found mac_setup.sh, setting up MAC addresses for all interfaces based on 14:91:82:29:A2:8B Updating NTP Servers if necessary checking for interactive script start up... Updating BootCount Page[15]:7800 ... Done Thu Oct 11 06:00:00 UTC 2012 cpu temp monitor created wdev0 no private ioctls. wdev1 no private ioctls. wan, sysevent received: wan-start Lighttpd Model Base: WRT1900ACS Generating Rainier lighttpd config Build temporary www configuration directory: wifi, sysevent received: lan-started (Wed Oct 10 23:00:03 PDT 2012) TSLIIHauhEfGE wifi, service_start() Power cycle Ethernet ports. Registering Service myrouter._http._tcp.local port 80 Got a reply for myrouter._http._tcp.local.: Name now registered and active Not ready for JNAP. Sleeping for 15 seconds... wifi, wifi_physical_start(wdev0) wifi_physical, iwconfig wdev0 commit wifi, wifi_virtual_start(wdev0) wifi, wifi_user_start(wdev0) wifi, primary AP: wdev0ap0 is up wifi, wifi_guest_start(wdev0) wifi, guest wdev0ap1 is disabled, do not start wifi guest [utopia] Not setting ppp_clamp_mtu wifi, wifi_physical_start(wdev1) wifi_physical, iwconfig wdev1 commit wifi, wifi_virtual_start(wdev1) wifi, wifi_user_start(wdev1) wifi, primary AP: wdev1ap0 is up wifi, wifi_guest_start(wdev1) wifi, guest wdev1ap1 is disabled, do not start wifi guest wifi, start_hostapd() Configuration file: /tmp/hostapd-wdev1ap0.conf Using interface wdev1ap0 with hwaddr 14:91:82:29:a2:8c and ssid "Linksys05685" Configuration file: /tmp/hostapd-wdev0ap0.conf Using interface wdev0ap0 with hwaddr 14:91:82:29:a2:8d and ssid "Linksys05685_5GHz" Restarting nfqrecv service... info: Received event notification_event-device-online with value "9281666f-1f91-4386-baf6-2cc64c0eb3a9". info: Handled event notification_event-device-online. info: Received event notification_event-device-online with value "81590ba9-e125-4237-adee-17843c2401af". info: Handled event notification_event-device-online. info: Received event notification_event-device-online with value "d77d44b2-28c3-4212-9dbd-7e9a6815e20f". info: Handled event notification_event-device-online. udhcpc (v1.15.2) started [utopia] Not setting ppp_clamp_mtu on dslite protocol wan, sysevent received: phylink_wan_state Sending discover... mountscript add sda 2 usb [utopia][usb hotplug] Loading partition 0/3 [utopia][usb hotplug] not mounted: sda is not a partition DRIVE_COUNT = 0, CUR_COUNT = 1, numPartitions=3, partitionCnt=0 mountscript add sda1 2 usb [utopia][usb hotplug] Loading partition 1/3 [utopia][usb hotplug] mount sda1 (ext4) Sending discover... DRIVE_COUNT = 1, CUR_COUNT = 2, numPartitions=3, partitionCnt=1 mountscript add sda3 2 usb [utopia][usb hotplug] Loading partition 2/3 [utopia][usb hotplug] mount sda3 (ext4) DRIVE_COUNT = 2, CUR_COUNT = 3, numPartitions=3, partitionCnt=2 mountscript add sda2 2 usb [utopia][usb hotplug] Loading partition 3/3 [utopia][usb hotplug] not mounted: sda2 (swap) unsupported DRIVE_COUNT = 2, CUR_COUNT = 3, numPartitions=3, partitionCnt=3 setting current device count from 0 to 2 Sending discover... 2 usb storage drives detected... Starting smbd ...


OpenWrt & LEDE

Armada XP

WRT1900AC v1
Kernel 4.4.14

BootROM 1.20 Booting from NAND flash Step 1: First phase of PEX-PIPE Configuration Step 2: Configure the desire PIN_PHY_GEN Step 3 QSGMII enable Step 4: Configure SERDES MUXes Step 5: Activate the RX High Impedance Mode Step 6: [PEX-Only] PEX-Main configuration (X4 or X1) Step 6.2: [PEX-Only] PCI Express Link Capabilities Step 7: [PEX-X4 Only] To create PEX-Link Steps 7,8,9,10 and 11 Steps 12: [PEX-Only] Last phase of PEX-PIPE Configuration Steps 13: Wait 15ms before checking results Steps 14: [PEX-Only] In order to configure Steps 15: [PEX-Only] In order to configure Steps 16: [PEX-Only] Training Enablestep 17: max_if= 0x7 step 17: PEX0 pexUnit= 0 ** Link is Gen1, check the EP capability --> 0050 mvPexConfigRead: return addr=0x%x0050 --> 7001 --> 7001 --> A005 --> A005 --> 0010 --> 4C12 Gen2 client! step 17: PEX1 pexUnit= 0 step 17: PEX2 pexUnit= 0 ** Link is Gen1, check the EP capability --> 0040 mvPexConfigRead: return addr=0x%x0040 --> 5001 --> 5001 --> 7005 --> 7005 --> 0010 --> DC12 Gen2 client! step 17: PEX3 pexUnit= 0 PEX3 : Detected No Link. Status Reg(0x0004DA64) = 0x00000001 step 17: PEX4 pexUnit= 1 PEX4 : Detected No Link. Status Reg(0x00081A64) = 0x00000001 step 17: PEX5 pexUnit= 1 PEX5 : Detected No Link. Status Reg(0x00085A64) = 0x00000001 step 17: PEX6 pexUnit= 1 PEX6 : Detected No Link. Status Reg(0x00089A64) = 0x00000001 DDR3 Training Sequence - Ver 4.5.DDR3 Training Sequence - Static MC Init DDR3 Training Sequence - HW Training Procedure DDR3 Training Sequence - Switching XBAR Window to FastPath Window BootROM: Image checksum verification PASSED __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2011.12 (Feb 06 2014 - 17:14:13) Marvell version: v2011.12 2013_Q1.2 Boot version:v1.3.25 Board: RD-AXP-GP rev 1.0 SoC: MV78230 B0 running 2 CPUs Custom configuration CPU: Marvell PJ4B (584) v7 (Rev 2) LE CPU 0 CPU @ 1200 [MHz] L2 @ 600 [MHz] TClock @ 250 [MHz] DDR @ 600 [MHz] DDR 32Bit Width, FastPath Memory Access DDR ECC Disabled DRAM: 256 MiB Map: Code:0x0fea7000:0x0ff5e2d4 BSS:0x0ffefd80 Stack:0x0f9a6ef8 Heap:0x0f9a7000:0x0fea7000 NAND: Spansion 1Gb(ID=F101) 128 MiB MMC: MRVL_MMC: 0 Bad block table found at page 65472, version 0x01 Bad block table found at page 65408, version 0x01 #### auto_recovery #### [u_env] get auto_recovery == off [u_env] get auto_recovery == off [u_env] get boot_part == 1 [u_env] get boot_part_ready == 3 auto_recovery enabled:0, boot_part:1, boot_part_ready:3 PEX 0.0(0): Root Complex Interface, Detected Link X1, GEN 2.0 PEX 0.1(1): Root Complex Interface, Detected Link X1, GEN 1.1 PEX 0.2(2): Root Complex Interface, Detected Link X1, GEN 2.0 PEX 0.3(3): Detected No Link. PEX 1.0(4): Detected No Link. PEX 1.1(5): Detected No Link. PEX 1.2(6): Detected No Link. boot_end Offset: 0x100000 u_env_off Offset: 0x100000 s_env_off Offset: 0x140000 devinfo Offset: 0x900000 =================== total_badCount: 0 boot_badCount: 0 u_env_badCount: 0 s_env_badCount: 0 buff_badCount: 0 =================== FPU initialized to Run Fast Mode. USB 0: Host Mode USB 1: Host Mode USB 2: Device Mode Modules Detected: mvEthE6171SwitchBasicInit finished Net: mvSysNetaInit enter set port 0 to rgmii enter set port 1 to rgmii enter egiga0 [PRIME], egiga1 modify Phy Status auto_recovery_check changes bootcmd: run nandboot Hit any key to stop autoboot: 3 2 1 0 NAND read: device 0 offset 0xa00000, size 0x400000 4194304 bytes read: OK ## Booting kernel from Legacy Image at 02000000 ... Image Name: ARM OpenWrt Linux-3.18.14 Created: 2015-06-08 16:58:30 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1618369 Bytes = 1.5 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.000000] Linux version 4.4.14 (jeff@jeff-VM) (gcc version 5.3.0 (LEDE GCC 5.3.0 r918) ) #1 SMP Sun Jul 10 16:13:35 UTC 2016 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000000] CPU: ARMv7 Processor [562f5842] revision 2 (ARMv7), cr=10c5387d Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000000] Machine model: Linksys WRT1900AC Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000000] Memory policy: Data cache writealloc Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.000000] On node 0 totalpages: 65536 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat c05c5ec0, node_mem_map cfdf9000 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.000000] Normal zone: 512 pages used for memmap Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.000000] Normal zone: 65536 pages, LIFO batch:15 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000000] PERCPU: Embedded 12 pages/cpu @cfdd1000 s17984 r8192 d22976 u49152 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.000000] pcpu-alloc: s17984 r8192 d22976 u49152 alloc=12*4096 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.000000] Kernel command line: console=ttyS0,115200 mtdparts=armada-nand:1024K(uboot)ro,256K(u_env),256K(s_env),1m@9m(devinfo),40m@10m(kernel),37m@13m(rootfs),40m@50m(alt_kernel),37m@53m(alt_rootfs),80m@10m(ubifs),-@90m(syscfg) root=/dev/mtdblock7 ro rootfstype=jffs2 init=/sbin/init Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000000] Memory: 253348K/262144K available (4067K kernel code, 171K rwdata, 1524K rodata, 260K init, 295K bss, 8796K reserved, 0K cma-reserved, 0K highmem) Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.000000] Virtual kernel memory layout: Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.000000] .text : 0xc0008000 - 0xc057e088 (5593 kB) Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.000000] .init : 0xc057f000 - 0xc05c0000 ( 260 kB) Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.000000] .data : 0xc05c0000 - 0xc05eae34 ( 172 kB) Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.000000] .bss : 0xc05eae34 - 0xc0634a6c ( 296 kB) Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000000] Hierarchical RCU implementation. Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000000] NR_IRQS:16 nr_irqs:16 16 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000000] Aurora cache controller enabled, 32 ways, 2048 kB Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000000] Aurora: CACHE_ID 0x00000100, AUX_CTRL 0x1a69ef12 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000000] Switching to timer-based delay loop, resolution 40ns Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000005] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000017] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000196] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000) Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000208] pid_max: default: 32768 minimum: 301 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000270] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000279] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000565] CPU: Testing write buffer coherency: ok Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000727] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.000881] Setting up static identity map for 0x8280 - 0x82d8 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.001145] mvebu-soc-id: MVEBU SoC ID=0x7823, Rev=0x2 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.001266] mvebu-pmsu: Initializing Power Management Service Unit Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.002009] Booting CPU 1 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.004351] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.004409] Brought up 2 CPUs Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.004420] SMP: Total of 2 processors activated (100.00 BogoMIPS). Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.004425] CPU: All CPU(s) started in SVC mode. Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.007509] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.007639] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.007705] pinctrl core: initialized pinctrl subsystem Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.008235] NET: Registered protocol family 16 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.008445] DMA: preallocated 256 KiB pool for atomic coherent allocations Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.030098] cpuidle: using governor ladder Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.061177] SCSI subsystem initialized Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.061313] libata version 3.00 loaded. Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.061529] usbcore: registered new interface driver usbfs Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.061577] usbcore: registered new interface driver hub Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.061622] usbcore: registered new device driver usb Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.062395] clocksource: Switched to clocksource armada_370_xp_clocksource Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.063090] NET: Registered protocol family 2 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.063419] TCP established hash table entries: 2048 (order: 1, 8192 bytes) Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.063443] TCP bind hash table entries: 2048 (order: 2, 16384 bytes) Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.063465] TCP: Hash tables configured (established 2048 bind 2048) Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.063499] UDP hash table entries: 256 (order: 1, 8192 bytes) Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.063514] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.063620] NET: Registered protocol family 1 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.063656] PCI: CLS 0 bytes, default 64 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.064413] futex hash table entries: 512 (order: 3, 32768 bytes) Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.069733] squashfs: version 4.0 (2009/01/31) Phillip Lougher Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.069747] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.071089] io scheduler noop registered Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.071102] io scheduler deadline registered (default) Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.071686] armada-xp-pinctrl f1018000.pin-ctrl: registered pinctrl driver Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.072161] irq: Cannot allocate irq_descs @ IRQ40, assuming pre-allocated Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.072518] irq: Cannot allocate irq_descs @ IRQ72, assuming pre-allocated Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.073013] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.073026] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.073036] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xffdfffff] Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.073045] pci_bus 0000:00: root bus resource [bus 00-ff] Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.073070] pci 0000:00:01.0: [11ab:7823] type 01 class 0x060400 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.073231] pci 0000:00:02.0: [11ab:7823] type 01 class 0x060400 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.073368] pci 0000:00:03.0: [11ab:7823] type 01 class 0x060400 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.073513] PCI: bus0: Fast back to back transfers disabled Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.073524] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.073536] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.073546] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.073645] pci 0000:01:00.0: [1b6f:7023] type 00 class 0x0c0330 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.073690] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit] Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.073771] pci 0000:01:00.0: supports D1 D2 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.073780] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.073896] PCI: bus1: Fast back to back transfers disabled Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.073909] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.074010] pci 0000:02:00.0: [11ab:2a55] type 00 class 0x020000 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.074054] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref] Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.074074] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x000fffff 64bit pref] Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.074154] pci 0000:02:00.0: supports D1 D2 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.074163] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.074277] PCI: bus2: Fast back to back transfers disabled Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.074288] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.074392] pci 0000:03:00.0: [11ab:2a55] type 00 class 0x020000 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.074431] pci 0000:03:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref] Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.074449] pci 0000:03:00.0: reg 0x18: [mem 0x00000000-0x000fffff 64bit pref] Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.074519] pci 0000:03:00.0: supports D1 D2 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.074528] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.074642] PCI: bus3: Fast back to back transfers disabled Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.074654] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.074757] pci 0000:00:01.0: BAR 8: assigned [mem 0xf8000000-0xf80fffff] Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.074769] pci 0000:00:02.0: BAR 8: assigned [mem 0xf8200000-0xf83fffff] Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.074780] pci 0000:00:03.0: BAR 8: assigned [mem 0xf8400000-0xf85fffff] Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.074792] pci 0000:01:00.0: BAR 0: assigned [mem 0xf8000000-0xf8007fff 64bit] Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.074809] pci 0000:00:01.0: PCI bridge to [bus 01] Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.074820] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf80fffff] Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.074834] pci 0000:02:00.0: BAR 0: assigned [mem 0xf8200000-0xf82fffff 64bit pref] Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.074852] pci 0000:02:00.0: BAR 2: assigned [mem 0xf8300000-0xf83fffff 64bit pref] Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.074868] pci 0000:00:02.0: PCI bridge to [bus 02] Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.074877] pci 0000:00:02.0: bridge window [mem 0xf8200000-0xf83fffff] Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.074891] pci 0000:03:00.0: BAR 0: assigned [mem 0xf8400000-0xf84fffff 64bit pref] Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.074908] pci 0000:03:00.0: BAR 2: assigned [mem 0xf8500000-0xf85fffff 64bit pref] Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.074923] pci 0000:00:03.0: PCI bridge to [bus 03] Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.074932] pci 0000:00:03.0: bridge window [mem 0xf8400000-0xf85fffff] Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.074977] pci 0000:00:01.0: enabling device (0140 -> 0142) Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.075000] pci 0000:01:00.0: enabling device (0140 -> 0142) Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.075169] mv_xor f1060900.xor: Marvell shared XOR driver Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.113122] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.113237] mv_xor f10f0900.xor: Marvell shared XOR driver Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.153102] mv_xor f10f0900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.153301] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.153727] console [ttyS0] disabled Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.173848] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 20, base_baud = 15625000) is a 16550A Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.869960] console [ttyS0] enabled Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 0.874042] sata_mv f10a0000.sata: version 1.28 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.874157] sata_mv f10a0000.sata: slots 32 ports 1 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.879752] scsi host0: sata_mv Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.883075] ata1: SATA max UDMA/133 irq 29 Mon Jul 11 09:30:16 2016 kern.warn kernel: [ 0.887584] pxa3xx-nand f10d0000.nand: This platform can't do DMA on this device Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.895726] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.902098] nand: AMD/Spansion S34ML01G1 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.906054] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.913663] pxa3xx-nand f10d0000.nand: ECC strength 16, ECC step size 2048 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.920863] Bad block table found at page 65472, version 0x01 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.927176] Bad block table found at page 65408, version 0x01 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.933239] nand_read_bbt: bad block at 0x000006bc0000 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 0.938391] nand_read_bbt: bad block at 0x000006da0000 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.943720] 10 ofpart partitions found on MTD device pxa3xx_nand-0 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.949919] Creating 10 MTD partitions on "pxa3xx_nand-0": Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.955441] 0x000000000000-0x000000100000 : "u-boot" Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.961008] 0x000000100000-0x000000140000 : "u_env" Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.966461] 0x000000140000-0x000000180000 : "s_env" Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.971880] 0x000000900000-0x000000a00000 : "devinfo" Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.977502] 0x000000a00000-0x000003200000 : "kernel1" Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.983177] 0x000000d00000-0x000003200000 : "rootfs1" Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.988784] 0x000003200000-0x000005a00000 : "kernel2" Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.994426] 0x000003500000-0x000005a00000 : "ubi" Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 0.999683] 0x000005a00000-0x000008000000 : "syscfg" Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 1.005232] 0x000000180000-0x000000900000 : "unused_area" Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.011764] m25p80 spi0.0: mr25h256 (32 Kbytes) Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.017584] libphy: Fixed MDIO Bus: probed Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.021825] libphy: orion_mdio_bus: probed Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.026201] mvneta_bm f10c0000.bm: Buffer Manager for network controller enabled Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.036039] mvneta f1070000.ethernet eth0: Using random mac address 7e:02:b1:5e:91:27 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.045860] mvneta f1074000.ethernet eth1: Using random mac address 66:60:c9:69:50:78 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.053822] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.060371] ehci-pci: EHCI PCI platform driver Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.064892] ehci-platform: EHCI generic platform driver Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.070259] ehci-orion: EHCI orion driver Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.074395] orion-ehci f1050000.usb: EHCI Host Controller Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.079826] orion-ehci f1050000.usb: new USB bus registered, assigned bus number 1 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.087497] orion-ehci f1050000.usb: irq 26, io mem 0xf1050000 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.112406] orion-ehci f1050000.usb: USB 2.0 started, EHCI 1.00 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.118779] hub 1-0:1.0: USB hub found Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.122590] hub 1-0:1.0: 1 port detected Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.126829] xhci_hcd 0000:01:00.0: xHCI Host Controller Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.132084] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.139650] xhci_hcd 0000:01:00.0: hcc params 0x040050af hci version 0x100 quirks 0x00080490 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.148595] hub 2-0:1.0: USB hub found Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.152404] hub 2-0:1.0: 2 ports detected Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.156625] xhci_hcd 0000:01:00.0: xHCI Host Controller Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.161876] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.169371] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.177872] hub 3-0:1.0: USB hub found Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.181662] hub 3-0:1.0: 2 ports detected Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.186205] usbcore: registered new interface driver usb-storage Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.192535] i2c /dev entries driver Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.198150] orion_wdt: Initial timeout 171 sec Mon Jul 11 09:30:16 2016 kern.err kernel: [ 1.202838] cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19 Mon Jul 11 09:30:16 2016 kern.err kernel: [ 1.212433] cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:1, -19 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.225463] marvell-cesa f1090000.crypto: CESA device successfully registered Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.234237] NET: Registered protocol family 10 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.239848] NET: Registered protocol family 17 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.242485] ata1: SATA link down (SStatus 0 SControl F300) Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.249931] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.262616] 8021q: 802.1Q VLAN Support v1.8 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 1.266980] Registering SWP/SWPB emulation handler Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 1.273829] UBI: auto-attach mtd7 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 1.276991] ubi0: attaching mtd7 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.442475] usb 1-1: new high-speed USB device number 2 using orion-ehci Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 1.484087] ubi0: scanning is finished Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 1.496908] ubi0: attached mtd7 (name "ubi", size 37 MiB) Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 1.502335] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 1.509284] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 1.516140] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 1.523156] ubi0: good PEBs: 296, bad PEBs: 0, corrupted PEBs: 0 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 1.529186] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 1.536466] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1859740326 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 1.545661] ubi0: available PEBs: 0, total reserved PEBs: 296, PEBs reserved for bad PEB handling: 20 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 1.555031] ubi0: background thread "ubi_bgt0d" started, PID 552 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.555100] usb 3-2: new SuperSpeed USB device number 2 using xhci_hcd Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.556279] block ubiblock0_0: created from ubi0:0(rootfs) Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 1.556286] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.556681] mvsw61xx 1000000003.mvsw61xx: Found MV88E6172 at f1072004.mdio-mi:10 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.556691] mvsw61xx 1000000003.mvsw61xx: Using direct addressing Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.556767] hctosys: unable to open rtc device (rtc0) Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.574721] usb-storage 3-2:1.0: USB Mass Storage device detected Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.582704] scsi host1: usb-storage 3-2:1.0 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.612263] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.619884] Freeing unused kernel memory: 260K (c057f000 - c05c0000) Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.702671] usb-storage 1-1:1.0: USB Mass Storage device detected Mon Jul 11 09:30:16 2016 kern.info kernel: [ 1.709259] scsi host2: usb-storage 1-1:1.0 Mon Jul 11 09:30:16 2016 user.info kernel: [ 2.079811] init: Console is alive Mon Jul 11 09:30:16 2016 user.info kernel: [ 2.083455] init: - watchdog - Mon Jul 11 09:30:16 2016 user.info kernel: [ 2.582237] init: - preinit - Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 2.583070] scsi 1:0:0:0: Direct-Access WD My Passport 0748 1016 PQ: 0 ANSI: 6 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 2.584054] scsi 1:0:0:1: Enclosure WD SES Device 1016 PQ: 0 ANSI: 6 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 2.602910] sd 1:0:0:0: [sda] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB) Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 2.611882] sd 1:0:0:0: [sda] Write Protect is off Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 2.616809] sd 1:0:0:0: [sda] Mode Sense: 47 00 10 08 Mon Jul 11 09:30:16 2016 kern.err kernel: [ 2.617884] sd 1:0:0:0: [sda] No Caching mode page found Mon Jul 11 09:30:16 2016 kern.err kernel: [ 2.623287] sd 1:0:0:0: [sda] Assuming drive cache: write through Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 2.713888] scsi 2:0:0:0: Direct-Access CENTON DS Pro 0.00 PQ: 0 ANSI: 2 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 2.725378] sd 2:0:0:0: [sdb] 3923968 512-byte logical blocks: (2.01 GB/1.87 GiB) Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 2.734034] sd 2:0:0:0: [sdb] Write Protect is off Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 2.738880] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00 Mon Jul 11 09:30:16 2016 kern.err kernel: [ 2.739836] sd 2:0:0:0: [sdb] Asking for cache data failed Mon Jul 11 09:30:16 2016 kern.err kernel: [ 2.745424] sd 2:0:0:0: [sdb] Assuming drive cache: write through Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 2.802014] random: procd urandom read with 92 bits of entropy available Mon Jul 11 09:30:16 2016 kern.info kernel: [ 2.922747] sdb: sdb1 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 2.928233] sd 2:0:0:0: [sdb] Attached SCSI removable disk Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 3.179680] random: nonblocking pool is initialized Mon Jul 11 09:30:16 2016 user.info kernel: [ 6.388274] mount_root: loading kmods from internal overlay Mon Jul 11 09:30:16 2016 kern.info kernel: [ 8.462093] sda: sda1 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 8.470998] sd 1:0:0:0: [sda] Attached SCSI disk Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 8.490955] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 676 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 8.544569] UBIFS (ubi0:1): recovery needed Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 8.634067] UBIFS (ubi0:1): recovery completed Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 8.638663] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 8.646588] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 8.656594] UBIFS (ubi0:1): FS size: 25395200 bytes (24 MiB, 200 LEBs), journal size 1269760 bytes (1 MiB, 10 LEBs) Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 8.667116] UBIFS (ubi0:1): reserved for root: 1199478 bytes (1171 KiB) Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 8.673814] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID CF921A3A-4382-4457-98B3-A8E608B4CDBE, small LPT model Mon Jul 11 09:30:16 2016 user.info kernel: [ 8.688780] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab Mon Jul 11 09:30:16 2016 user.info kernel: [ 8.702870] block: extroot: not configured Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 8.732782] UBIFS (ubi0:1): un-mount UBI device 0 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 8.737546] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 8.748073] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 679 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 8.829490] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 8.837427] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 8.847433] UBIFS (ubi0:1): FS size: 25395200 bytes (24 MiB, 200 LEBs), journal size 1269760 bytes (1 MiB, 10 LEBs) Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 8.857956] UBIFS (ubi0:1): reserved for root: 1199478 bytes (1171 KiB) Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 8.864654] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID CF921A3A-4382-4457-98B3-A8E608B4CDBE, small LPT model Mon Jul 11 09:30:16 2016 user.info kernel: [ 8.881077] mount_root: loading kmods from internal overlay Mon Jul 11 09:30:16 2016 user.info kernel: [ 9.181237] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab Mon Jul 11 09:30:16 2016 user.info kernel: [ 9.192733] block: extroot: not configured Mon Jul 11 09:30:16 2016 user.info kernel: [ 9.224332] mount_root: switching to jffs2 overlay Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 9.333212] ubi1: attaching mtd8 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 9.558847] ubi1: scanning is finished Mon Jul 11 09:30:16 2016 kern.warn kernel: [ 9.571863] ubi1 warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 2, need 10 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 9.583332] ubi1: attached mtd8 (name "syscfg", size 38 MiB) Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 9.589023] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 9.595996] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 9.602866] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 9.609858] ubi1: good PEBs: 294, bad PEBs: 10, corrupted PEBs: 0 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 9.616025] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 9.623328] ubi1: max/mean erase counter: 163/150, WL threshold: 4096, image sequence number: 1034175800 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 9.632893] ubi1: available PEBs: 0, total reserved PEBs: 294, PEBs reserved for bad PEB handling: 2 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 9.642095] ubi1: background thread "ubi_bgt1d" started, PID 691 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 9.662251] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 695 Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 9.757234] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "syscfg" Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 9.764727] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 9.774734] UBIFS (ubi1:0): FS size: 35426304 bytes (33 MiB, 279 LEBs), journal size 1777664 bytes (1 MiB, 14 LEBs) Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 9.785255] UBIFS (ubi1:0): reserved for root: 1673271 bytes (1634 KiB) Mon Jul 11 09:30:16 2016 kern.notice kernel: [ 9.791905] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 67205603-7CD6-45AF-BA53-9B04AD2514EA, small LPT model Mon Jul 11 09:30:16 2016 user.warn kernel: [ 9.806820] urandom-seed: Seeding with /etc/urandom.seed Mon Jul 11 09:30:16 2016 user.info kernel: [ 9.896424] procd: - early - Mon Jul 11 09:30:16 2016 user.info kernel: [ 9.899422] procd: - watchdog - Mon Jul 11 09:30:16 2016 user.info kernel: [ 10.540497] procd: - ubus - Mon Jul 11 09:30:16 2016 user.info kernel: [ 10.603381] procd: - init - Mon Jul 11 09:30:16 2016 kern.info kernel: [ 11.065117] ntfs: driver 2.1.32 [Flags: R/O MODULE]. Mon Jul 11 09:30:16 2016 kern.info kernel: [ 11.071823] tun: Universal TUN/TAP device driver, 1.6 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 11.076986] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> Mon Jul 11 09:30:16 2016 kern.info kernel: [ 11.087166] wireguard: WireGuard loaded. See www.wireguard.io for information. Mon Jul 11 09:30:16 2016 kern.info kernel: [ 11.094461] wireguard: (C) Copyright 2015-2016 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. Mon Jul 11 09:30:16 2016 kern.info kernel: [ 11.105039] ip6_tables: (C) 2000-2006 Netfilter Core Team Mon Jul 11 09:30:16 2016 kern.info kernel: [ 11.116080] cryptodev: driver 1.8 loaded. Mon Jul 11 09:30:16 2016 kern.info kernel: [ 11.121067] Loading modules backported from Linux version wt-2016-06-20-0-gbc17424 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 11.128728] Backport generated by backports.git backports-20160216-7-g5735958 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 11.148869] <<Marvell 802.11ac Wireless Network Driver version 10.3.0.17-20160617>> Mon Jul 11 09:30:16 2016 kern.info kernel: [ 11.156461] pci 0000:00:02.0: enabling device (0140 -> 0142) Mon Jul 11 09:30:16 2016 kern.info kernel: [ 11.162356] mwlwifi 0000:02:00.0: enabling device (0140 -> 0142) Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 11.168579] ieee80211 phy0: priv->iobase0 = d1100000 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 11.168621] ieee80211 phy0: priv->iobase1 = d1280000 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 11.168649] ieee80211 phy0: priv->pcmd_buf = ce2d0000 priv->pphys_cmd_buf = 0e2d0000 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 11.199953] ieee80211 phy0: fw download start Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 11.317087] ieee80211 phy0: FwSize = 117828 downloaded Size = 117828 curr_iteration 65510 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.178583] ieee80211 phy0: fw download complete Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.180056] ieee80211 phy0: pcmd = ce2d0000 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 12.197563] ieee80211 phy0: firmware version: 0x7020902 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.225679] ieee80211 phy0: regdomain: FCC Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.225704] ieee80211 phy0: Channel: 1: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.225734] ieee80211 phy0: 17 11 11 11 10 10 10 10 f f f f 0 0 0 0 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.225750] ieee80211 phy0: Channel: 2: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.225779] ieee80211 phy0: 17 16 16 16 16 16 16 14 10 10 10 10 0 0 0 0 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.225795] ieee80211 phy0: Channel: 3: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.225823] ieee80211 phy0: 17 16 16 16 16 16 16 14 10 10 10 10 0 0 0 0 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.225839] ieee80211 phy0: Channel: 4: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.225867] ieee80211 phy0: 17 16 16 16 16 16 16 14 10 10 10 10 0 0 0 0 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.225883] ieee80211 phy0: Channel: 5: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.225911] ieee80211 phy0: 17 16 16 16 16 16 16 14 10 10 10 10 0 0 0 0 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.225927] ieee80211 phy0: Channel: 6: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.225955] ieee80211 phy0: 17 16 16 16 16 16 16 14 10 10 10 10 0 0 0 0 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.225971] ieee80211 phy0: Channel: 7: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.225999] ieee80211 phy0: 17 16 16 16 16 16 16 14 10 10 10 10 0 0 0 0 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.226015] ieee80211 phy0: Channel: 8: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.226043] ieee80211 phy0: 17 16 16 16 16 16 16 14 10 10 10 10 0 0 0 0 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.226059] ieee80211 phy0: Channel: 9: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.226087] ieee80211 phy0: 17 16 16 16 16 16 16 14 10 10 10 10 0 0 0 0 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.226103] ieee80211 phy0: Channel: 10: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.226131] ieee80211 phy0: 17 16 16 16 16 16 16 14 10 10 10 10 0 0 0 0 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.226147] ieee80211 phy0: Channel: 11: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.226175] ieee80211 phy0: 17 11 11 11 11 11 11 11 10 10 10 10 0 0 0 0 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 12.228077] ieee80211 phy0: 2G enabled, 5G disabled Mon Jul 11 09:30:16 2016 kern.info kernel: [ 12.233038] ieee80211 phy0: 4 TX antennas, 4 RX antennas Mon Jul 11 09:30:16 2016 kern.info kernel: [ 12.238519] pci 0000:00:03.0: enabling device (0140 -> 0142) Mon Jul 11 09:30:16 2016 kern.info kernel: [ 12.244278] mwlwifi 0000:03:00.0: enabling device (0140 -> 0142) Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.250444] ieee80211 phy1: priv->iobase0 = d1400000 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.250505] ieee80211 phy1: priv->iobase1 = d1580000 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.250545] ieee80211 phy1: priv->pcmd_buf = cdfac000 priv->pphys_cmd_buf = 0dfac000 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.259035] ieee80211 phy1: fw download start Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 12.382136] ieee80211 phy1: FwSize = 117828 downloaded Size = 117828 curr_iteration 65501 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.252499] ieee80211 phy1: fw download complete Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.253990] ieee80211 phy1: pcmd = cdfac000 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 13.271738] ieee80211 phy1: firmware version: 0x7020902 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.301970] ieee80211 phy1: regdomain: FCC Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.301995] ieee80211 phy1: Channel: 36: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302024] ieee80211 phy1: 8 8 8 8 8 8 8 8 9 9 9 9 9 9 9 9 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302040] ieee80211 phy1: Channel: 40: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302067] ieee80211 phy1: 8 8 8 8 9 9 9 9 9 9 9 9 9 9 9 9 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302083] ieee80211 phy1: Channel: 44: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302110] ieee80211 phy1: 8 8 8 8 9 9 9 9 9 9 9 9 9 9 9 9 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302126] ieee80211 phy1: Channel: 48: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302153] ieee80211 phy1: 8 8 8 8 9 9 9 9 9 9 9 9 9 9 9 9 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302168] ieee80211 phy1: Channel: 52: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302196] ieee80211 phy1: f f f f f f f f 12 12 12 12 12 12 12 12 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302212] ieee80211 phy1: Channel: 56: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302240] ieee80211 phy1: f f f f f f f f 12 12 12 12 12 12 12 12 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302255] ieee80211 phy1: Channel: 60: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302283] ieee80211 phy1: f f f f f f f f 12 12 12 12 12 12 12 12 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302299] ieee80211 phy1: Channel: 64: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302327] ieee80211 phy1: f f f f f f f f 12 12 12 12 12 12 12 12 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302343] ieee80211 phy1: Channel: 100: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302372] ieee80211 phy1: 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302435] ieee80211 phy1: Channel: 104: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302465] ieee80211 phy1: 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302488] ieee80211 phy1: Channel: 108: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302526] ieee80211 phy1: 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302543] ieee80211 phy1: Channel: 112: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302571] ieee80211 phy1: 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302587] ieee80211 phy1: Channel: 116: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302616] ieee80211 phy1: 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302632] ieee80211 phy1: Channel: 120: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302660] ieee80211 phy1: 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302676] ieee80211 phy1: Channel: 124: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302705] ieee80211 phy1: 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302720] ieee80211 phy1: Channel: 128: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302749] ieee80211 phy1: 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302765] ieee80211 phy1: Channel: 132: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302793] ieee80211 phy1: 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302809] ieee80211 phy1: Channel: 136: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302838] ieee80211 phy1: 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302853] ieee80211 phy1: Channel: 140: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302882] ieee80211 phy1: 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302898] ieee80211 phy1: Channel: 149: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302926] ieee80211 phy1: 16 16 16 16 14 14 14 14 15 15 15 15 14 14 14 14 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302942] ieee80211 phy1: Channel: 153: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302971] ieee80211 phy1: 15 15 15 15 15 15 15 15 15 15 15 15 14 14 14 14 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.302987] ieee80211 phy1: Channel: 157: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.303016] ieee80211 phy1: 15 15 15 15 15 15 15 15 15 15 15 15 14 14 14 14 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.303031] ieee80211 phy1: Channel: 161: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.303060] ieee80211 phy1: 15 15 15 15 15 15 15 15 15 15 15 15 14 14 14 14 Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.303076] ieee80211 phy1: Channel: 165: 0x0 0x0 0xf Mon Jul 11 09:30:16 2016 kern.debug kernel: [ 13.303104] ieee80211 phy1: 16 16 16 16 16 16 16 16 15 15 15 15 14 14 14 14 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 13.305032] ieee80211 phy1: 2G disabled, 5G enabled Mon Jul 11 09:30:16 2016 kern.info kernel: [ 13.309943] ieee80211 phy1: 4 TX antennas, 4 RX antennas Mon Jul 11 09:30:16 2016 kern.info kernel: [ 13.321372] fuse init (API version 7.23) Mon Jul 11 09:30:16 2016 kern.info kernel: [ 13.331095] ip_tables: (C) 2000-2006 Netfilter Core Team Mon Jul 11 09:30:16 2016 kern.info kernel: [ 13.347458] nf_conntrack version 0.5.0 (3962 buckets, 15848 max) Mon Jul 11 09:30:16 2016 kern.info kernel: [ 13.479593] xt_time: kernel timezone is -0000 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 13.491900] PPP generic driver version 2.4.2 Mon Jul 11 09:30:16 2016 kern.info kernel: [ 13.497569] NET: Registered protocol family 24 Mon Jul 11 09:30:17 2016 daemon.err block: /dev/ubi0_1 is already mounted Mon Jul 11 09:30:18 2016 cron.info crond[1172]: crond (busybox 1.24.2) started, log level 5 Mon Jul 11 09:30:18 2016 authpriv.info dropbear[1188]: Not backgrounding Mon Jul 11 09:30:18 2016 kern.info kernel: [ 17.566582] device eth0 entered promiscuous mode Mon Jul 11 09:30:18 2016 daemon.notice netifd: Interface 'lan' is enabled Mon Jul 11 09:30:18 2016 daemon.notice netifd: Interface 'lan' is setting up now Mon Jul 11 09:30:18 2016 daemon.notice netifd: Interface 'lan' is now up Mon Jul 11 09:30:18 2016 kern.info kernel: [ 17.577459] br-lan: port 1(eth0) entered forwarding state Mon Jul 11 09:30:18 2016 kern.info kernel: [ 17.582948] br-lan: port 1(eth0) entered forwarding state Mon Jul 11 09:30:18 2016 daemon.notice netifd: Interface 'loopback' is enabled Mon Jul 11 09:30:18 2016 daemon.notice netifd: Interface 'loopback' is setting up now Mon Jul 11 09:30:18 2016 daemon.notice netifd: Interface 'loopback' is now up Mon Jul 11 09:30:18 2016 daemon.notice netifd: Interface 'wan' is enabled Mon Jul 11 09:30:18 2016 daemon.notice netifd: Interface 'wan6' is enabled Mon Jul 11 09:30:18 2016 daemon.notice netifd: Bridge 'br-lan' link is up Mon Jul 11 09:30:18 2016 daemon.notice netifd: Interface 'lan' has link connectivity Mon Jul 11 09:30:18 2016 daemon.notice netifd: Network device 'lo' link is up Mon Jul 11 09:30:18 2016 kern.info kernel: [ 17.637520] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready Mon Jul 11 09:30:18 2016 daemon.notice netifd: Interface 'loopback' has link connectivity Mon Jul 11 09:30:18 2016 user.notice firewall: Reloading firewall due to ifup of lan (br-lan) Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.373385] ieee80211 phy1: regdomain: FCC Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.377510] ieee80211 phy1: Channel: 36: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.382559] ieee80211 phy1: 8 8 8 8 8 8 8 8 9 9 9 9 9 9 9 9 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.388241] ieee80211 phy1: Channel: 40: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.393253] ieee80211 phy1: 8 8 8 8 9 9 9 9 9 9 9 9 9 9 9 9 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.398934] ieee80211 phy1: Channel: 44: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.403942] ieee80211 phy1: 8 8 8 8 9 9 9 9 9 9 9 9 9 9 9 9 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.409632] ieee80211 phy1: Channel: 48: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.414660] ieee80211 phy1: 8 8 8 8 9 9 9 9 9 9 9 9 9 9 9 9 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.420338] ieee80211 phy1: Channel: 52: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.425403] ieee80211 phy1: f f f f f f f f 12 12 12 12 12 12 12 12 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.431825] ieee80211 phy1: Channel: 56: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.436860] ieee80211 phy1: f f f f f f f f 12 12 12 12 12 12 12 12 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.443266] ieee80211 phy1: Channel: 60: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.448253] ieee80211 phy1: f f f f f f f f 12 12 12 12 12 12 12 12 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.454646] ieee80211 phy1: Channel: 64: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.459686] ieee80211 phy1: f f f f f f f f 12 12 12 12 12 12 12 12 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.466117] ieee80211 phy1: Channel: 100: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.471209] ieee80211 phy1: 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.478339] ieee80211 phy1: Channel: 104: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.483482] ieee80211 phy1: 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.490558] ieee80211 phy1: Channel: 108: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.495654] ieee80211 phy1: 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.502741] ieee80211 phy1: Channel: 112: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.507816] ieee80211 phy1: 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.514901] ieee80211 phy1: Channel: 116: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.519978] ieee80211 phy1: 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.527105] ieee80211 phy1: Channel: 120: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.532198] ieee80211 phy1: 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.539329] ieee80211 phy1: Channel: 124: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.544437] ieee80211 phy1: 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.551520] ieee80211 phy1: Channel: 128: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.556648] ieee80211 phy1: 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.563776] ieee80211 phy1: Channel: 132: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.568857] ieee80211 phy1: 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.575964] ieee80211 phy1: Channel: 136: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.581040] ieee80211 phy1: 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.588129] ieee80211 phy1: Channel: 140: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.593222] ieee80211 phy1: 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.600293] ieee80211 phy1: Channel: 149: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.605392] ieee80211 phy1: 16 16 16 16 14 14 14 14 15 15 15 15 14 14 14 14 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.612521] ieee80211 phy1: Channel: 153: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.617611] ieee80211 phy1: 15 15 15 15 15 15 15 15 15 15 15 15 14 14 14 14 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.624732] ieee80211 phy1: Channel: 157: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.629809] ieee80211 phy1: 15 15 15 15 15 15 15 15 15 15 15 15 14 14 14 14 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.636898] ieee80211 phy1: Channel: 161: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.641984] ieee80211 phy1: 15 15 15 15 15 15 15 15 15 15 15 15 14 14 14 14 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.649108] ieee80211 phy1: Channel: 165: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.654258] ieee80211 phy1: 16 16 16 16 16 16 16 16 15 15 15 15 14 14 14 14 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.661391] ieee80211 phy0: regdomain: FCC Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.665568] ieee80211 phy0: Channel: 1: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.670488] ieee80211 phy0: 17 11 11 11 10 10 10 10 f f f f 0 0 0 0 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.676908] ieee80211 phy0: Channel: 2: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.681814] ieee80211 phy0: 17 16 16 16 16 16 16 14 10 10 10 10 0 0 0 0 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.688560] ieee80211 phy0: Channel: 3: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.693512] ieee80211 phy0: 17 16 16 16 16 16 16 14 10 10 10 10 0 0 0 0 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.700250] ieee80211 phy0: Channel: 4: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.705207] ieee80211 phy0: 17 16 16 16 16 16 16 14 10 10 10 10 0 0 0 0 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.711949] ieee80211 phy0: Channel: 5: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.716878] ieee80211 phy0: 17 16 16 16 16 16 16 14 10 10 10 10 0 0 0 0 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.723622] ieee80211 phy0: Channel: 6: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.728535] ieee80211 phy0: 17 16 16 16 16 16 16 14 10 10 10 10 0 0 0 0 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.735319] ieee80211 phy0: Channel: 7: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.740225] ieee80211 phy0: 17 16 16 16 16 16 16 14 10 10 10 10 0 0 0 0 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.746963] ieee80211 phy0: Channel: 8: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.751865] ieee80211 phy0: 17 16 16 16 16 16 16 14 10 10 10 10 0 0 0 0 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.758601] ieee80211 phy0: Channel: 9: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.763519] ieee80211 phy0: 17 16 16 16 16 16 16 14 10 10 10 10 0 0 0 0 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.770253] ieee80211 phy0: Channel: 10: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.775284] ieee80211 phy0: 17 16 16 16 16 16 16 14 10 10 10 10 0 0 0 0 Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.782008] ieee80211 phy0: Channel: 11: 0x0 0x0 0xf Mon Jul 11 09:30:19 2016 kern.debug kernel: [ 18.787009] ieee80211 phy0: 17 11 11 11 11 11 11 11 10 10 10 10 0 0 0 0 Mon Jul 11 09:30:19 2016 daemon.notice netifd: Bridge 'br-lan' link is down Mon Jul 11 09:30:19 2016 kern.info kernel: [ 18.824742] br-lan: port 1(eth0) entered disabled state Mon Jul 11 09:30:19 2016 daemon.notice netifd: Interface 'lan' has link connectivity loss Mon Jul 11 09:30:20 2016 user.notice : setting up led power Mon Jul 11 09:30:20 2016 user.notice : setting up led wan Mon Jul 11 09:30:20 2016 user.notice : setting up led usb2 Mon Jul 11 09:30:20 2016 user.notice : setting up led usb3 Mon Jul 11 09:30:20 2016 daemon.info dnsmasq[1444]: started, version 2.76 cachesize 150 Mon Jul 11 09:30:20 2016 daemon.info dnsmasq[1444]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify Mon Jul 11 09:30:20 2016 daemon.info dnsmasq[1444]: DNS service limited to local subnets Mon Jul 11 09:30:20 2016 daemon.info dnsmasq-dhcp[1444]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h Mon Jul 11 09:30:20 2016 daemon.info dnsmasq[1444]: using local addresses only for domain lan Mon Jul 11 09:30:20 2016 daemon.warn dnsmasq[1444]: no servers found in /tmp/resolv.conf.auto, will retry Mon Jul 11 09:30:20 2016 daemon.info dnsmasq[1444]: read /etc/hosts - 1 addresses Mon Jul 11 09:30:20 2016 daemon.info dnsmasq[1444]: read /tmp/hosts/dhcp - 2 addresses Mon Jul 11 09:30:20 2016 daemon.info dnsmasq-dhcp[1444]: read /etc/ethers - 0 addresses Mon Jul 11 09:30:20 2016 daemon.notice netifd: Interface 'vpn0' is enabled Mon Jul 11 09:30:20 2016 daemon.notice netifd: Network device 'tun0' link is up Mon Jul 11 09:30:20 2016 daemon.notice netifd: Interface 'vpn0' has link connectivity Mon Jul 11 09:30:20 2016 daemon.notice netifd: Interface 'vpn0' is setting up now Mon Jul 11 09:30:20 2016 daemon.notice netifd: Interface 'vpn0' is now up Mon Jul 11 09:30:20 2016 daemon.notice netifd: radio1 (1234): command failed: Not supported (-95) Mon Jul 11 09:30:20 2016 daemon.notice netifd: radio0 (1233): command failed: Not supported (-95) Mon Jul 11 09:30:20 2016 kern.info kernel: [ 19.792587] mvneta f1074000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off Mon Jul 11 09:30:20 2016 kern.info kernel: [ 19.800486] mvneta f1070000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off Mon Jul 11 09:30:20 2016 kern.info kernel: [ 19.814366] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready Mon Jul 11 09:30:20 2016 kern.info kernel: [ 19.820847] br-lan: port 1(eth0) entered forwarding state Mon Jul 11 09:30:20 2016 kern.info kernel: [ 19.826340] br-lan: port 1(eth0) entered forwarding state Mon Jul 11 09:30:20 2016 daemon.notice netifd: Network device 'eth1' link is up Mon Jul 11 09:30:20 2016 daemon.notice netifd: Interface 'wan' has link connectivity Mon Jul 11 09:30:20 2016 daemon.notice netifd: Interface 'wan' is setting up now Mon Jul 11 09:30:20 2016 daemon.notice netifd: Interface 'wan6' has link connectivity Mon Jul 11 09:30:20 2016 daemon.notice netifd: Interface 'wan6' is setting up now Mon Jul 11 09:30:20 2016 daemon.notice netifd: Interface 'wan6' is now up Mon Jul 11 09:30:20 2016 daemon.notice netifd: Network device 'eth0' link is up Mon Jul 11 09:30:20 2016 daemon.notice netifd: Bridge 'br-lan' link is up Mon Jul 11 09:30:20 2016 daemon.notice netifd: Interface 'lan' has link connectivity Mon Jul 11 09:30:21 2016 daemon.notice netifd: radio1 (1234): Configuration file: /var/run/hostapd-phy1.conf Mon Jul 11 09:30:21 2016 daemon.notice netifd: wan (1619): udhcpc (v1.24.2) started Mon Jul 11 09:30:21 2016 daemon.notice netifd: wan (1619): Sending discover... Mon Jul 11 09:30:21 2016 daemon.notice netifd: wan (1619): Sending select for 50.36.100.###... Mon Jul 11 09:30:21 2016 daemon.notice netifd: wan (1619): Lease of 50.36.100.### obtained, lease time 300 Mon Jul 11 09:30:21 2016 daemon.info procd: - init complete - Mon Jul 11 09:30:21 2016 kern.debug kernel: [ 20.169684] ieee80211 phy1: change: 0xffffffff Mon Jul 11 09:30:21 2016 kern.info kernel: [ 20.325388] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready Mon Jul 11 09:30:21 2016 daemon.notice netifd: Interface 'wan' is now up Mon Jul 11 09:30:21 2016 daemon.info dnsmasq[1444]: reading /tmp/resolv.conf.auto Mon Jul 11 09:30:21 2016 daemon.info dnsmasq[1444]: using local addresses only for domain lan Mon Jul 11 09:30:21 2016 daemon.info dnsmasq[1444]: using nameserver 50.36.100.1#53 Mon Jul 11 09:30:21 2016 kern.info kernel: [ 20.336871] device wlan1 entered promiscuous mode Mon Jul 11 09:30:21 2016 kern.info kernel: [ 20.341652] br-lan: port 2(wlan1) entered forwarding state Mon Jul 11 09:30:21 2016 kern.info kernel: [ 20.347241] br-lan: port 2(wlan1) entered forwarding state Mon Jul 11 09:30:21 2016 daemon.notice netifd: radio1 (1234): wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE Mon Jul 11 09:30:21 2016 daemon.notice netifd: radio1 (1234): wlan1: interface state COUNTRY_UPDATE->HT_SCAN Mon Jul 11 09:30:21 2016 kern.debug kernel: [ 20.354394] ieee80211 phy1: change: 0x100 Mon Jul 11 09:30:21 2016 kern.debug kernel: [ 20.367735] ieee80211 phy1: change: 0x60 Mon Jul 11 09:30:21 2016 user.notice firewall: Reloading firewall due to ifup of vpn0 (tun0) Mon Jul 11 09:30:21 2016 kern.debug kernel: [ 20.582486] ieee80211 phy1: change: 0x40 Mon Jul 11 09:30:21 2016 kern.debug kernel: [ 20.792564] ieee80211 phy1: change: 0x60 Mon Jul 11 09:30:21 2016 kern.debug kernel: [ 20.901769] ieee80211 phy1: change: 0x100 Mon Jul 11 09:30:21 2016 daemon.notice netifd: radio1 (1234): Using interface wlan1 with hwaddr 94:10:3e:87:e4:77 and ssid "A Singularity 5" Mon Jul 11 09:30:21 2016 kern.info kernel: [ 20.915234] br-lan: port 2(wlan1) entered disabled state Mon Jul 11 09:30:22 2016 daemon.info dnsmasq[1444]: exiting on receipt of SIGTERM Mon Jul 11 09:30:22 2016 daemon.info dnsmasq[1740]: started, version 2.76 cachesize 150 Mon Jul 11 09:30:22 2016 daemon.info dnsmasq[1740]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify Mon Jul 11 09:30:22 2016 daemon.info dnsmasq[1740]: DNS service limited to local subnets Mon Jul 11 09:30:22 2016 daemon.info dnsmasq-dhcp[1740]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h Mon Jul 11 09:30:22 2016 daemon.info dnsmasq[1740]: using local addresses only for domain lan Mon Jul 11 09:30:22 2016 daemon.info dnsmasq[1740]: reading /tmp/resolv.conf.auto Mon Jul 11 09:30:22 2016 daemon.info dnsmasq[1740]: using local addresses only for domain lan Mon Jul 11 09:30:22 2016 daemon.info dnsmasq[1740]: using nameserver 50.36.100.1#53 Mon Jul 11 09:30:22 2016 daemon.info dnsmasq[1740]: read /etc/hosts - 1 addresses Mon Jul 11 09:30:22 2016 daemon.info dnsmasq[1740]: read /tmp/hosts/dhcp - 2 addresses Mon Jul 11 09:30:22 2016 daemon.info dnsmasq-dhcp[1740]: read /etc/ethers - 0 addresses Mon Jul 11 09:30:22 2016 kern.debug kernel: [ 21.034269] ieee80211 phy1: change: 0x100 Mon Jul 11 09:30:22 2016 kern.debug kernel: [ 21.047607] ieee80211 phy1: change: 0x62 Mon Jul 11 09:30:22 2016 user.notice firewall: Reloading firewall due to ifup of wan6 (eth1) Mon Jul 11 09:30:22 2016 kern.info kernel: [ 21.266980] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready Mon Jul 11 09:30:22 2016 kern.info kernel: [ 21.273573] br-lan: port 2(wlan1) entered forwarding state Mon Jul 11 09:30:22 2016 kern.info kernel: [ 21.279128] br-lan: port 2(wlan1) entered forwarding state Mon Jul 11 09:30:22 2016 daemon.notice netifd: radio1 (1234): wlan1: interface state HT_SCAN->ENABLED Mon Jul 11 09:30:22 2016 daemon.notice netifd: radio1 (1234): wlan1: AP-ENABLED Mon Jul 11 09:30:22 2016 daemon.notice netifd: Network device 'wlan1' link is up Mon Jul 11 09:30:22 2016 kern.info kernel: [ 21.822441] br-lan: port 1(eth0) entered forwarding state Mon Jul 11 09:30:23 2016 user.notice firewall: Reloading firewall due to ifup of wan (eth1) Mon Jul 11 09:30:23 2016 user.notice adblock[1867] info : adblock service started due to 'ifup' of 'wan' interface Mon Jul 11 09:30:24 2016 user.notice adblock[1958] info : domain adblock processing started (1.3.3, r930, 11.07.2016 09:30:24) Mon Jul 11 09:30:24 2016 user.notice adblock[1958] info : backup/restore will be disabled Mon Jul 11 09:30:24 2016 kern.info kernel: [ 23.272425] br-lan: port 2(wlan1) entered forwarding state Mon Jul 11 09:30:24 2016 user.notice adblock[1958] info : created volatile firewall rulesets Mon Jul 11 09:30:24 2016 user.notice adblock[1958] info : created volatile uhttpd instances Mon Jul 11 09:30:24 2016 user.notice adblock[1958] info : => processing source 'adaway' Mon Jul 11 09:31:00 2016 daemon.info dnsmasq[1740]: read /etc/hosts - 1 addresses Mon Jul 11 09:31:00 2016 daemon.info dnsmasq[1740]: read /tmp/hosts/dhcp - 2 addresses Mon Jul 11 09:31:00 2016 daemon.info dnsmasq-dhcp[1740]: read /etc/ethers - 0 addresses Mon Jul 11 09:31:01 2016 user.notice adblock[1958] info : source download finished (410 entries) Mon Jul 11 09:31:01 2016 user.notice adblock[1958] info : domain merging finished Mon Jul 11 09:31:01 2016 user.notice adblock[1958] info : => processing source 'disconnect' Mon Jul 11 09:31:02 2016 user.notice adblock[1958] info : source download finished (5736 entries) Mon Jul 11 09:31:02 2016 user.notice adblock[1958] info : domain merging finished Mon Jul 11 09:31:03 2016 user.notice adblock[1958] info : => processing source 'shalla' Mon Jul 11 09:31:29 2016 user.notice adblock[1958] info : source download finished (32867 entries) Mon Jul 11 09:31:31 2016 user.notice adblock[1958] info : domain merging finished Mon Jul 11 09:31:31 2016 user.notice adblock[1958] info : => processing source 'winhelp' Mon Jul 11 09:31:34 2016 daemon.info hostapd: wlan1: STA 40:e2:30:42:1c:b9 IEEE 802.11: authenticated Mon Jul 11 09:31:34 2016 daemon.info hostapd: wlan1: STA 40:e2:30:42:1c:b9 IEEE 802.11: associated (aid 1) Mon Jul 11 09:31:34 2016 daemon.info hostapd: wlan1: STA 40:e2:30:42:1c:b9 WPA: pairwise key handshake completed (RSN) Mon Jul 11 09:31:34 2016 user.notice adblock[1958] info : source download finished (13334 entries) Mon Jul 11 09:31:35 2016 user.notice adblock[1958] info : domain merging finished Mon Jul 11 09:31:35 2016 user.notice adblock[1958] info : => processing source 'yoyo' Mon Jul 11 09:31:37 2016 user.notice adblock[1958] info : source download finished (2385 entries) Mon Jul 11 09:31:37 2016 user.notice adblock[1958] info : domain merging finished Mon Jul 11 09:31:37 2016 user.notice adblock[1958] info : remove duplicates in separate block lists Mon Jul 11 09:31:48 2016 daemon.info dnsmasq[1740]: exiting on receipt of SIGTERM Mon Jul 11 09:31:49 2016 daemon.info dnsmasq[2521]: started, version 2.76 cachesize 150 Mon Jul 11 09:31:49 2016 daemon.info dnsmasq[2521]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify Mon Jul 11 09:31:49 2016 daemon.info dnsmasq[2521]: DNS service limited to local subnets Mon Jul 11 09:31:49 2016 daemon.info dnsmasq-dhcp[2521]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h Mon Jul 11 09:31:49 2016 daemon.info dnsmasq[2521]: using local addresses only for domain lan Mon Jul 11 09:31:49 2016 daemon.info dnsmasq[2521]: reading /tmp/resolv.conf.auto Mon Jul 11 09:31:49 2016 daemon.info dnsmasq[2521]: using local addresses only for domain lan Mon Jul 11 09:31:49 2016 daemon.info dnsmasq[2521]: using nameserver 50.36.100.1#53 Mon Jul 11 09:31:49 2016 daemon.info dnsmasq[2521]: read /etc/hosts - 1 addresses Mon Jul 11 09:31:49 2016 daemon.info dnsmasq[2521]: read /tmp/hosts/dhcp - 2 addresses Mon Jul 11 09:31:49 2016 daemon.info dnsmasq-dhcp[2521]: read /etc/ethers - 0 addresses Mon Jul 11 09:31:50 2016 user.notice adblock[1958] info : block lists with overall 48796 domains loaded Mon Jul 11 09:31:50 2016 user.notice adblock[1958] info : firewall statistics (IPv4/IPv6): 0%/0% of all packets in prerouting chain are ad related & blocked Mon Jul 11 09:31:50 2016 user.notice adblock[1958] info : domain adblock processing finished successfully (1.3.3, r930, 11.07.2016 09:31:50) Mon Jul 11 09:33:25 2016 daemon.notice netifd: wan (1619): Sending renew... Mon Jul 11 09:33:25 2016 daemon.notice netifd: wan (1619): Lease of 50.36.100.### obtained, lease time 300

Armada 385

WRT1900ACS
Kernel 4.4.14

BootROM - 1.73 Booting from NAND flash General initialization - Version: 1.0.0 Detected Device ID 6820 High speed PHY - Version: 2.0 Init RD NAS topology Serdes Lane 3 is USB3 Serdes Lane 4 is SGMII board SerDes lanes topology details: | Lane # | Speed | Type | -------------------------------- | 0 | 06 | SATA0| | 1 | 05 | PCIe0| | 2 | 06 | SATA1| | 3 | 05 | USB3 HOST1| | 4 | 05 | PCIe1| | 5 | 00 | SGMII2| -------------------------------- :** Link is Gen1, check the EP capability PCIe, Idx 0: Link upgraded to Gen2 based on client cpabilities :** Link is Gen1, check the EP capability PCIe, Idx 1: remains Gen1 High speed PHY - Ended Successfully DDR3 Training Sequence - Ver TIP-1.26.0 mvSysEnvGetTopologyUpdateInfo: TWSI Read failed DDR3 Training Sequence - Switching XBAR Window to FastPath Window DDR3 Training Sequence - Ended Successfully Not detected suspend to RAM indication BootROM: Image checksum verification PASSED __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2013.01 (Mar 27 2015 - 16:50:46) Marvell version: 2014_T3.0p6 Boot version : v1.0.13 Board: RD-NAS-88F6820-DDR3 SoC: MV88F6820 Rev A0 running 2 CPUs CPU: ARM Cortex A9 MPCore (Rev 1) LE CPU 0 CPU @ 1600 [MHz] L2 @ 800 [MHz] TClock @ 200 [MHz] DDR @ 800 [MHz] DDR 32 Bit Width, FastPath Memory Access, DLB Enabled, ECC Disabled DRAM: 512 MiB Map: Code:0x1fea9000:0x1ff7632c BSS:0x1ffef6b4 Stack:0x1f9a8f20 Heap:0x1f9a9000:0x1fea9000 raise: Signal # 8 caught U-ENV offset == 0x200000 raise: Signal # 8 caught U-ENV offset == 0x200000 U-Boot Environment:0x00200000:0x00220000 (NAND) NAND: 128 MiB MMC: mv_sdh: 0 DEVINFO offset == 0x900000 U-ENV offset == 0x200000 U-ENV offset == 0x200000 S-ENV offset == 0x240000 #### auto_recovery #### [u_env] get auto_recovery == yes [u_env] get auto_recovery == yes [u_env] get boot_part == 1 [u_env] get boot_part_ready == 3 auto_recovery enabled:1, boot_part:1, boot_part_ready:3 S-ENV offset == 0x240000 [boot_count_read] block:0x240000, size:128KB, records:64 [boot_count_read_record] boot_count:0, next_record:16 [boot_count_write] erase:0, auto_recovery->block_offset:0x240000 offset=0x248000 Updating boot_count ... [boot_count_write] offset:0x248000 , length:2048 done PCI-e 0 (IF 0 - bus 0) Root Complex Interface, Detected Link X1, GEN 2.0 PCI-e 1 (IF 1 - bus 1) Root Complex Interface, Detected Link X1, GEN 1.1 USB2.0 0: Host Mode USB3.0 1: Host Mode USB3.0 0: Host Mode Board configuration detected: mvEthE6171SwitchBasicInit init Net: | port | Interface | PHY address | |--------|-----------|--------------| | egiga0 | RGMII | 0x01 | | egiga1 | SGMII | 0x00 | egiga0 [PRIME], egiga1 auto_recovery_check changes bootcmd: run nandboot Hit any key to stop autoboot: 3 2 1 NAND read: device 0 offset 0xa00000, size 0x600000 6291456 bytes read: OK ## Booting kernel from Legacy Image at 02000000 ... Image Name: ARM OpenWrt Linux-4.4.14 Created: 2016-07-25 11:32:53 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2118149 Bytes = 2 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.14 (jw0914@Ubuntu-VM) (gcc version 5.3.0 (OpenWrt GCC 5.3.0 49876) ) #15 SMP Fri Jul 29 16:24:11 UTC 2016 [ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Linksys WRT1900ACS [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] PERCPU: Embedded 12 pages/cpu @dfbcf000 s17984 r8192 d22976 u49152 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock5 ro rootdelay=1 rootfstype=jffs2 earlyprintk mtdparts=armada-nand:2048K(uboot)ro,256K(u_env),256K(s_env),1m@9m(devinfo),40m@10m(kernel),34m@16m(rootfs),40m@50m(alt_kernel),34m@56m(alt_rootfs),80m@10m(ubifs),-@90m(syscfg) [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 513124K/524288K available (4157K kernel code, 176K rwdata, 1544K rodata, 256K init, 295K bss, 11164K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc05999a0 (5703 kB) [ 0.000000] .init : 0xc059a000 - 0xc05da000 ( 256 kB) [ 0.000000] .data : 0xc05da000 - 0xc0606204 ( 177 kB) [ 0.000000] .bss : 0xc0606204 - 0xc065003c ( 296 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 D prefetch enabled, offset 1 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001 [ 0.000000] Switching to timer-based delay loop, resolution 40ns [ 0.000003] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns [ 0.000009] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns [ 0.000115] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000) [ 0.000122] pid_max: default: 32768 minimum: 301 [ 0.000158] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000162] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000342] CPU: Testing write buffer coherency: ok [ 0.000440] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.000464] Setting up static identity map for 0x8280 - 0x82d8 [ 0.000540] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4 [ 0.000617] mvebu-pmsu: Initializing Power Management Service Unit [ 0.000998] Booting CPU 1 [ 0.001157] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.001183] Brought up 2 CPUs [ 0.001189] SMP: Total of 2 processors activated (100.00 BogoMIPS). [ 0.001191] CPU: All CPU(s) started in SVC mode. [ 0.002871] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.002942] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.002983] pinctrl core: initialized pinctrl subsystem [ 0.003290] NET: Registered protocol family 16 [ 0.003780] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.029940] cpuidle: using governor ladder [ 0.032441] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling [ 0.032449] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling [ 0.060410] reg-fixed-voltage xhci0-vbus: could not find pctldev for node /soc/internal-regs/pinctrl@18000/xhci0-vbus-pins, deferring probe [ 0.060559] SCSI subsystem initialized [ 0.060763] usbcore: registered new interface driver usbfs [ 0.060789] usbcore: registered new interface driver hub [ 0.060812] usbcore: registered new device driver usb [ 0.061321] clocksource: Switched to clocksource armada_370_xp_clocksource [ 0.061759] NET: Registered protocol family 2 [ 0.061993] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.062018] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.062051] TCP: Hash tables configured (established 4096 bind 4096) [ 0.062072] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.062084] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.062147] NET: Registered protocol family 1 [ 0.062547] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.064856] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.064866] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.065529] io scheduler noop registered [ 0.065536] io scheduler deadline registered (default) [ 0.065931] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver [ 0.066239] irq: Cannot allocate irq_descs @ IRQ44, assuming pre-allocated [ 0.066383] irq: Cannot allocate irq_descs @ IRQ76, assuming pre-allocated [ 0.066667] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00 [ 0.066675] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] [ 0.066680] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff] [ 0.066684] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.066863] PCI: bus0: Fast back to back transfers disabled [ 0.066869] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.066875] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.067096] PCI: bus1: Fast back to back transfers disabled [ 0.067346] PCI: bus2: Fast back to back transfers disabled [ 0.067400] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe01fffff] [ 0.067406] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0200000-0xe03fffff] [ 0.067413] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64bit pref] [ 0.067423] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0100000-0xe01fffff 64bit pref] [ 0.067432] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.067438] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe01fffff] [ 0.067445] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0200000-0xe02fffff 64bit pref] [ 0.067455] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0300000-0xe03fffff 64bit pref] [ 0.067464] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.067469] pci 0000:00:02.0: bridge window [mem 0xe0200000-0xe03fffff] [ 0.067563] mv_xor f1060800.xor: Marvell shared XOR driver [ 0.101758] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr ) [ 0.101844] mv_xor f1060900.xor: Marvell shared XOR driver [ 0.141742] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr ) [ 0.141880] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.142142] console [ttyS0] disabled [ 0.162208] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 21, base_baud = 12500000) is a 16550A [ 0.872522] console [ttyS0] enabled [ 0.876363] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 0.885461] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 0.894853] scsi host0: ahci-mvebu [ 0.898418] scsi host1: ahci-mvebu [ 0.901931] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41 [ 0.909882] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41 [ 0.918216] pxa3xx-nand f10d0000.flash: This platform can't do DMA on this device [ 0.926036] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1 [ 0.932424] nand: AMD/Spansion S34ML01G2 [ 0.936362] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 0.943968] pxa3xx-nand f10d0000.flash: ECC strength 16, ECC step size 2048 [ 0.951146] Bad block table found at page 65472, version 0x01 [ 0.957259] Bad block table found at page 65408, version 0x01 [ 0.963295] 10 ofpart partitions found on MTD device pxa3xx_nand-0 [ 0.969500] Creating 10 MTD partitions on "pxa3xx_nand-0": [ 0.975017] 0x000000000000-0x000000200000 : "u-boot" [ 0.980303] 0x000000200000-0x000000240000 : "u_env" [ 0.985473] 0x000000240000-0x000000280000 : "s_env" [ 0.990623] 0x000000900000-0x000000a00000 : "devinfo" [ 0.995964] 0x000000a00000-0x000003200000 : "kernel1" [ 1.001329] 0x000001000000-0x000003200000 : "ubi" [ 1.006332] 0x000003200000-0x000005a00000 : "kernel2" [ 1.011679] 0x000003800000-0x000005a00000 : "rootfs2" [ 1.017031] 0x000005a00000-0x000008000000 : "syscfg" [ 1.022307] 0x000000280000-0x000000900000 : "unused_area" [ 1.028411] libphy: Fixed MDIO Bus: probed [ 1.032635] libphy: orion_mdio_bus: probed [ 1.036886] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled [ 1.045794] mvneta f1034000.ethernet eth0: Using random mac address 82:84:c5:8c:e3:87 [ 1.054822] mvneta f1070000.ethernet eth1: Using hardware mac address 14:91:82:29:a2:8b [ 1.062926] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.069481] ehci-pci: EHCI PCI platform driver [ 1.073988] ehci-platform: EHCI generic platform driver [ 1.079320] ehci-orion: EHCI orion driver [ 1.083418] orion-ehci f1058000.usb: EHCI Host Controller [ 1.088846] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1 [ 1.096509] orion-ehci f1058000.usb: irq 36, io mem 0xf1058000 [ 1.121322] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00 [ 1.127495] hub 1-0:1.0: USB hub found [ 1.131271] hub 1-0:1.0: 1 port detected [ 1.135580] usbcore: registered new interface driver usb-storage [ 1.141759] armada38x-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0 [ 1.149402] i2c /dev entries driver [ 1.164391] orion_wdt: Initial timeout 171 sec [ 1.172094] marvell-cesa f1090000.crypto: CESA device successfully registered [ 1.179751] NET: Registered protocol family 10 [ 1.184672] NET: Registered protocol family 17 [ 1.189153] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 1.201838] Bridge firewalling registered [ 1.205865] 8021q: 802.1Q VLAN Support v1.8 [ 1.210126] Registering SWP/SWPB emulation handler [ 1.215692] xhci-hcd f10f8000.usb3: xHCI Host Controller [ 1.221037] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2 [ 1.228661] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010 [ 1.237252] xhci-hcd f10f8000.usb3: irq 43, io mem 0xf10f8000 [ 1.243291] hub 2-0:1.0: USB hub found [ 1.247069] hub 2-0:1.0: 1 port detected [ 1.251090] xhci-hcd f10f8000.usb3: xHCI Host Controller [ 1.251340] ata2: SATA link down (SStatus 0 SControl 300) [ 1.251361] ata1: SATA link down (SStatus 0 SControl 300) [ 1.267282] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3 [ 1.274850] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.283172] hub 3-0:1.0: USB hub found [ 1.286948] hub 3-0:1.0: 1 port detected [ 1.291219] UBI: auto-attach mtd5 [ 1.294386] ubi0: attaching mtd5 [ 1.374982] ubi0: scanning is finished [ 1.394373] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 64 LEBs [ 1.401020] ubi0: attached mtd5 (name "ubi", size 34 MiB) [ 1.406452] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 1.413359] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 1.420174] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 1.427167] ubi0: good PEBs: 272, bad PEBs: 0, corrupted PEBs: 0 [ 1.433200] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 [ 1.440451] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 751904898 [ 1.449535] ubi0: available PEBs: 0, total reserved PEBs: 272, PEBs reserved for bad PEB handling: 20 [ 1.458807] ubi0: background thread "ubi_bgt0d" started, PID 553 [ 1.465223] block ubiblock0_0: created from ubi0:0(rootfs) [ 1.470735] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem [ 1.477918] mvsw61xx 10.mvsw61xx: Found MV88E6176 at f1072004.mdio-mi:10 [ 1.484661] mvsw61xx 10.mvsw61xx: Using direct addressing [ 1.490128] armada38x-rtc f10a3800.rtc: setting system clock to 1970-01-01 00:02:06 UTC (126) [ 1.499467] Waiting 1 sec before mounting root device... [ 2.311339] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.331982] usb-storage 3-1:1.0: USB Mass Storage device detected [ 2.338190] scsi host2: usb-storage 3-1:1.0 [ 2.513201] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. [ 2.520498] Freeing unused kernel memory: 256K (c059a000 - c05da000) [ 2.814521] init: Console is alive [ 2.817995] init: - watchdog - [ 3.341658] scsi 2:0:0:0: Direct-Access PNY USB 3.0 FD 1.00 PQ: 0 ANSI: 6 [ 3.394543] random: nonblocking pool is initialized [ 3.651564] raid6: int32x1 gen() 152 MB/s [ 3.821412] raid6: int32x1 xor() 186 MB/s [ 3.991411] raid6: int32x2 gen() 238 MB/s [ 4.161318] raid6: int32x2 xor() 213 MB/s [ 4.331536] raid6: int32x4 gen() 259 MB/s [ 4.501325] raid6: int32x4 xor() 198 MB/s [ 4.671407] raid6: int32x8 gen() 371 MB/s [ 4.841419] raid6: int32x8 xor() 205 MB/s [ 4.845704] raid6: using algorithm int32x8 gen() 371 MB/s [ 4.851122] raid6: .... xor() 205 MB/s, rmw enabled [ 4.856021] raid6: using intx1 recovery algorithm [ 4.860976] xor: measuring software checksum speed [ 4.961314] arm4regs : 2510.400 MB/sec [ 5.061314] 8regs : 1934.800 MB/sec [ 5.161314] 32regs : 1990.000 MB/sec [ 5.165512] xor: using function: arm4regs (2510.400 MB/sec) [ 5.208152] Btrfs loaded [ 5.211854] exFAT: Version 1.2.9 [ 5.223910] SGI XFS with security attributes, no debug enabled [ 5.231819] sd 2:0:0:0: [sda] 499998720 512-byte logical blocks: (256 GB/238 GiB) [ 5.239448] sd 2:0:0:0: [sda] Write Protect is off [ 5.244496] sd 2:0:0:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [ 5.255541] sda: sda1 sda2 sda3 [ 5.259577] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 5.275239] init: - preinit - Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 8.594314] mount_root: loading kmods from internal overlay [ 8.717448] UBIFS (ubi0:1): default file-system created [ 8.723113] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 697 [ 8.763367] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" [ 8.771231] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 8.781194] UBIFS (ubi0:1): FS size: 6856704 bytes (6 MiB, 54 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs) [ 8.791325] UBIFS (ubi0:1): reserved for root: 323858 bytes (316 KiB) [ 8.797793] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 67745F9C-617F-4E4A-836F-29D15461F75A, small LPT model [ 8.809553] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab [ 8.816590] block: unable to load configuration (fstab: Entry not found) [ 8.823340] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab [ 8.829834] block: unable to load configuration (fstab: Entry not found) [ 8.836580] block: attempting to load /etc/config/fstab [ 8.858462] block: extroot: not configured [ 8.893146] UBIFS (ubi0:1): un-mount UBI device 0 [ 8.897883] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops [ 8.906074] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 700 [ 8.946519] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" [ 8.954396] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 8.964359] UBIFS (ubi0:1): FS size: 6856704 bytes (6 MiB, 54 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs) [ 8.974491] UBIFS (ubi0:1): reserved for root: 323858 bytes (316 KiB) [ 8.980959] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID 67745F9C-617F-4E4A-836F-29D15461F75A, small LPT model [ 9.058475] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab [ 9.065512] block: unable to load configuration (fstab: Entry not found) [ 9.072263] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab [ 9.078760] block: unable to load configuration (fstab: Entry not found) [ 9.085506] block: attempting to load /etc/config/fstab [ 9.090886] block: extroot: not configured [ 9.121887] mount_root: overlay filesystem has not been fully initialized yet [ 9.129215] mount_root: switching to jffs2 overlay BusyBox v1.24.2 () multi-call binary. Usage: ubiattach -m MTD_NUM [-d UBI_NUM] [-O VID_HDR_OFF] UBI_CTRL_DEV Attach MTD device to UBI -m MTD_NUMMTD device number to attach -d UBI_NUMUBI device number to assign -O VID_HDR_OFFVID header offset ubifs syscfg partition is damaged, reformatting BusyBox v1.24.2 () multi-call binary. Usage: ubidetach -d UBI_NUM UBI_CTRL_DEV Detach MTD device from UBI -d UBI_NUMUBI device number BusyBox v1.24.2 () multi-call binary. Usage: ubiattach -m MTD_NUM [-d UBI_NUM] [-O VID_HDR_OFF] UBI_CTRL_DEV Attach MTD device to UBI -m MTD_NUMMTD d[ 9.738430] procd: - early - evice number to [ 9.742657] procd: - watchdog - attach -d UBI_NUMUBI device number to assign -O VID_HDR_OFFVID header offset ubimkvol: unrecognized option: maxavsize BusyBox v1.24.2 () multi-call binary. Usage: ubimkvol UBI_DEVICE -N NAME [-s SIZE | -m] Create UBI volume -a ALIGNMENTVolume alignment (default 1) -mSet volume size to maximum available -n VOLIDVolume ID. If not specified, assigned automatically -N NAMEVolume name -s SIZESize in bytes -t TYPEVolume type (static|dynamic) mount: mounting ubi1:syscfg on /tmp/syscfg failed: No such device [ 9.940668] EXT4-fs (sda1): recovery complete [ 9.946949] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: [ 10.339344] procd: - ubus - [ 10.409278] procd: - init - Please press Enter to activate this console. [ 10.536626] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 10.551081] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 10.559828] tun: Universal TUN/TAP device driver, 1.6 [ 10.564921] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 10.573774] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 10.581506] Netfilter messages via NETLINK v0.30. [ 10.587009] ip_set: protocol 6 [ 10.596490] cryptodev: driver 1.8 loaded. [ 10.602289] Loading modules backported from Linux version wt-2016-05-12-0-g7a54796 [ 10.609905] Backport generated by backports.git backports-20160216-0-ge3c56e4 [ 10.626727] <<Marvell 802.11ac Wireless Network Driver version 10.3.0.17-20160617>> [ 10.634304] pci 0000:00:01.0: enabling device (0140 -> 0142) [ 10.983307] EXT4-fs (sda3): recovery complete [ 10.990849] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: [ 11.656323] ieee80211 phy0: firmware version: 0x7020902 [ 11.686578] ieee80211 phy0: 2G disabled, 5G enabled [ 11.691505] ieee80211 phy0: 4 TX antennas, 4 RX antennas [ 11.696913] pci 0000:00:02.0: enabling device (0140 -> 0142) [ 12.706323] ieee80211 phy1: firmware version: 0x7020902 [ 12.734428] ieee80211 phy1: 2G enabled, 5G disabled [ 12.739333] ieee80211 phy1: 4 TX antennas, 4 RX antennas [ 12.748683] u32 classifier [ 12.751419] input device check on [ 12.755094] Actions configured [ 12.758954] Mirror/redirect action on [ 12.769441] fuse init (API version 7.23) [ 12.781265] ip_tables: (C) 2000-2006 Netfilter Core Team [ 12.790724] nf_conntrack version 0.5.0 (8021 buckets, 32084 max) [ 12.797531] ctnetlink v0.93: registering with nfnetlink. [ 12.913432] usbcore: registered new interface driver ums-alauda [ 12.919650] usbcore: registered new interface driver ums-cypress [ 12.925993] usbcore: registered new interface driver ums-datafab [ 12.932304] usbcore: registered new interface driver ums-freecom [ 12.938625] usbcore: registered new interface driver ums-isd200 [ 12.944868] usbcore: registered new interface driver ums-jumpshot [ 12.951256] usbcore: registered new interface driver ums-karma [ 12.957454] usbcore: registered new interface driver ums-sddr09 [ 12.963751] usbcore: registered new interface driver ums-sddr55 [ 12.970008] usbcore: registered new interface driver ums-usbat [ 12.976540] usbip_core: USB/IP Core v1.0.0 [ 12.981092] usbcore: registered new device driver usbip-host [ 12.986792] usbip_host: USB/IP Host Driver v1.0.0 [ 12.991910] usbcore: registered new interface driver usblp [ 12.998547] vhci_hcd vhci_hcd: USB/IP Virtual Host Controller [ 13.004385] vhci_hcd vhci_hcd: new USB bus registered, assigned bus number 4 [ 13.011867] hub 4-0:1.0: USB hub found [ 13.015646] hub 4-0:1.0: 8 ports detected [ 13.019843] vhci_hcd: USB/IP 'Virtual' Host Controller (VHCI) Driver v1.0.0 [ 13.040574] xt_time: kernel timezone is -0000 [ 13.048315] PPP generic driver version 2.4.2 [ 13.053119] NET: Registered protocol family 24 [ 16.451828] device eth0 entered promiscuous mode [ 16.457380] br-lan: port 1(eth0) entered forwarding state [ 16.462832] br-lan: port 1(eth0) entered forwarding state [ 16.501979] device eth1 entered promiscuous mode [ 16.506647] br-lan: port 2(eth1) entered forwarding state [ 16.512119] br-lan: port 2(eth1) entered forwarding state [ 16.933120] ieee80211 phy1: regdomain: FCC [ 16.937241] ieee80211 phy1: Channel: 1: 0x0 0x0 0xf [ 16.942181] ieee80211 phy1: 17 10 10 10 f f f f e e e e 0 0 0 0 [ 16.948211] ieee80211 phy1: Channel: 2: 0x0 0x0 0xf [ 16.953124] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0 [ 16.959853] ieee80211 phy1: Channel: 3: 0x0 0x0 0xf [ 16.964767] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0 [ 16.971506] ieee80211 phy1: Channel: 4: 0x0 0x0 0xf [ 16.976405] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0 [ 16.983144] ieee80211 phy1: Channel: 5: 0x0 0x0 0xf [ 16.988045] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0 [ 16.994784] ieee80211 phy1: Channel: 6: 0x0 0x0 0xf [ 16.999684] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0 [ 17.006425] ieee80211 phy1: Channel: 7: 0x0 0x0 0xf [ 17.011335] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0 [ 17.018064] ieee80211 phy1: Channel: 8: 0x0 0x0 0xf [ 17.022975] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0 [ 17.029703] ieee80211 phy1: Channel: 9: 0x0 0x0 0xf [ 17.034608] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0 [ 17.041344] ieee80211 phy1: Channel: 10: 0x0 0x0 0xf [ 17.046330] ieee80211 phy1: 18 16 16 16 16 16 16 14 11 11 11 11 0 0 0 0 [ 17.053062] ieee80211 phy1: Channel: 11: 0x0 0x0 0xf [ 17.058048] ieee80211 phy1: 17 12 12 12 13 13 13 13 f f f f 0 0 0 0 [ 17.064456] ieee80211 phy0: regdomain: FCC [ 17.068569] ieee80211 phy0: Channel: 36: 0x0 0x0 0xf [ 17.073589] ieee80211 phy0: 12 12 12 12 12 12 12 12 10 10 10 10 f f f f [ 17.080342] ieee80211 phy0: Channel: 40: 0x0 0x0 0xf [ 17.085355] ieee80211 phy0: 16 16 16 16 16 16 16 16 16 16 16 16 f f f f [ 17.092095] ieee80211 phy0: Channel: 44: 0x0 0x0 0xf [ 17.097082] ieee80211 phy0: 16 16 16 16 16 16 16 16 16 16 16 16 f f f f [ 17.103823] ieee80211 phy0: Channel: 48: 0x0 0x0 0xf [ 17.108811] ieee80211 phy0: 16 16 16 16 16 16 16 16 16 16 16 16 f f f f [ 17.115550] ieee80211 phy0: Channel: 52: 0x0 0x0 0xf [ 17.120548] ieee80211 phy0: 11 11 11 11 10 10 10 10 12 12 12 12 10 10 10 10 [ 17.127636] ieee80211 phy0: Channel: 56: 0x0 0x0 0xf [ 17.132637] ieee80211 phy0: 11 11 11 11 10 10 10 10 12 12 12 12 10 10 10 10 [ 17.139713] ieee80211 phy0: Channel: 60: 0x0 0x0 0xf [ 17.144712] ieee80211 phy0: 11 11 11 11 10 10 10 10 12 12 12 12 10 10 10 10 [ 17.151820] ieee80211 phy0: Channel: 64: 0x0 0x0 0xf [ 17.156810] ieee80211 phy0: 11 11 11 11 10 10 10 10 12 12 12 12 10 10 10 10 [ 17.163912] ieee80211 phy0: Channel: 100: 0x0 0x0 0xf [ 17.168991] ieee80211 phy0: 10 10 10 10 11 11 11 11 12 12 12 12 10 10 10 10 [ 17.176092] ieee80211 phy0: Channel: 104: 0x0 0x0 0xf [ 17.181166] ieee80211 phy0: 11 11 11 11 10 10 10 10 12 12 12 12 10 10 10 10 [ 17.188257] ieee80211 phy0: Channel: 108: 0x0 0x0 0xf [ 17.193342] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10 [ 17.200419] ieee80211 phy0: Channel: 112: 0x0 0x0 0xf [ 17.205506] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10 [ 17.212617] ieee80211 phy0: Channel: 116: 0x0 0x0 0xf [ 17.217695] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10 [ 17.224805] ieee80211 phy0: Channel: 120: 0x0 0x0 0xf [ 17.229883] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10 [ 17.236980] ieee80211 phy0: Channel: 124: 0x0 0x0 0xf [ 17.242062] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10 [ 17.249138] ieee80211 phy0: Channel: 128: 0x0 0x0 0xf [ 17.254218] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10 [ 17.261296] ieee80211 phy0: Channel: 132: 0x0 0x0 0xf [ 17.266377] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10 [ 17.273460] ieee80211 phy0: Channel: 136: 0x0 0x0 0xf [ 17.278534] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10 [ 17.285615] ieee80211 phy0: Channel: 140: 0x0 0x0 0xf [ 17.290688] ieee80211 phy0: 11 11 11 11 10 10 10 10 11 11 11 11 10 10 10 10 [ 17.297770] ieee80211 phy0: Channel: 149: 0x0 0x0 0xf [ 17.302847] ieee80211 phy0: 16 16 16 16 16 16 16 16 15 15 15 15 15 15 15 15 [ 17.309924] ieee80211 phy0: Channel: 153: 0x0 0x0 0xf [ 17.315003] ieee80211 phy0: 16 16 16 16 15 15 15 15 15 15 15 15 15 15 15 15 [ 17.322087] ieee80211 phy0: Channel: 157: 0x0 0x0 0xf [ 17.327160] ieee80211 phy0: 16 16 16 16 15 15 15 15 15 15 15 15 15 15 15 15 [ 17.334241] ieee80211 phy0: Channel: 161: 0x0 0x0 0xf [ 17.339314] ieee80211 phy0: 16 16 16 16 15 15 15 15 15 15 15 15 15 15 15 15 [ 17.346400] ieee80211 phy0: Channel: 165: 0x0 0x0 0xf [ 17.351480] ieee80211 phy0: 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 [ 17.431365] br-lan: port 1(eth0) entered disabled state [ 17.436684] br-lan: port 2(eth1) entered disabled state [ 18.441378] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 18.462390] br-lan: port 1(eth0) entered forwarding state [ 18.467845] br-lan: port 1(eth0) entered forwarding state [ 18.491459] mvneta f1070000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off [ 18.503489] br-lan: port 2(eth1) entered forwarding state [ 18.508945] br-lan: port 2(eth1) entered forwarding state [ 18.766064] ieee80211 phy0: change: 0xffffffff [ 18.971433] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 19.101341] ieee80211 phy1: change: 0xffffffff [ 19.220441] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 19.232272] device wlan1 entered promiscuous mode [ 19.237024] br-lan: port 3(wlan1) entered forwarding state [ 19.242561] br-lan: port 3(wlan1) entered forwarding state [ 19.249221] device wlan0 entered promiscuous mode [ 19.253999] br-lan: port 4(wlan0) entered forwarding state [ 19.259523] br-lan: port 4(wlan0) entered forwarding state [ 19.312006] ieee80211 phy1: change: 0x100 [ 19.326781] ieee80211 phy1: change: 0x40 [ 19.340684] ieee80211 phy0: change: 0x100 [ 19.383965] ieee80211 phy0: change: 0x60 [ 19.437721] br-lan: port 4(wlan0) entered disabled state [ 19.443406] br-lan: port 3(wlan1) entered disabled state [ 19.591354] ieee80211 phy1: change: 0x40 [ 19.661370] ieee80211 phy0: change: 0x40 [ 19.801356] ieee80211 phy1: change: 0x40 [ 19.891359] ieee80211 phy0: change: 0x60 [ 20.019856] ieee80211 phy1: change: 0x40 [ 20.085418] ieee80211 phy0: change: 0x100 [ 20.293327] ieee80211 phy1: change: 0x40 [ 20.309453] ieee80211 phy0: change: 0x100 [ 20.340246] ieee80211 phy0: change: 0x62 [ 20.461333] br-lan: port 1(eth0) entered forwarding state [ 20.501335] br-lan: port 2(eth1) entered forwarding state [ 20.521397] ieee80211 phy1: change: 0x40 [ 20.619560] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 20.626082] br-lan: port 4(wlan0) entered forwarding state [ 20.631624] br-lan: port 4(wlan0) entered forwarding state [ 20.743295] ieee80211 phy0: change: 0x20 [ 20.781352] ieee80211 phy1: change: 0x40 [ 20.991349] ieee80211 phy1: change: 0x40 [ 21.211352] ieee80211 phy1: change: 0x40 [ 21.411367] ieee80211 phy1: change: 0x40 [ 21.621369] ieee80211 phy1: change: 0x40 [ 21.821364] ieee80211 phy1: change: 0x40 [ 21.915631] ieee80211 phy1: change: 0x100 [ 22.066118] ieee80211 phy1: change: 0x100 [ 22.095177] ieee80211 phy1: change: 0x42 [ 22.293671] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 22.300120] br-lan: port 3(wlan1) entered forwarding state [ 22.305665] br-lan: port 3(wlan1) entered forwarding state [ 22.411997] ieee80211 phy1: change: 0x20 [ 22.631321] br-lan: port 4(wlan0) entered forwarding state [ 24.301318] br-lan: port 3(wlan1) entered forwarding state

Bootloader

Corrupt Environment Recovery

The U-boot bootloader environment can be reset if it becomes corrupted

  • Issue the following commands at the Marvell » prompt:
    1. env default -a
    2. saveenv
    3. reset

Corrupt Bootloader Recovery

contributed by: nitroshift & Stefan Roese
PDF Nitroshift's GitHub DOCx

Prerequisites
Hardware

Hardware

  • PC running Linux
    • x86 libraries if x64
  • USB – TTL Cable
Armada XP

Armada XP

kwboot files

  • kwboot.tar
  • u-boot-nand.kwb
    • For transferring to router and writing to NAND
  • u-boot-uart.kwb
    • For booting from UART
Armada 385

Armada 385

kwboot files

  • u-boot-a38x-spi-uart.bin
    • For booting from UART
  • u-boot-a38x-spi.bin
    • For booting from NAND
Instructions
Information

Information

  • This wouldn't have been possible without the help of Stefan Roese
  • If utilized, please send a thank you to:
Armada XP

Armada XP

  1. Terminal root access:
    1. sudo –i
  2. Install kwboot:
    1. cd /home/kwboot
      1. Unzip the archive, then: tar –xvf kwboot.tar
        • Actual compilation of kwboot: gcc kwboot.c
    2. Save u-boot-nand.kwb and u-boot-uart.kwb in /home/kwboot
  3. Set kwboot as executable:
    1. Chmod 777 kwboot
  4. Connect USB-TTL to router and PC (don’t power on router) & issue the following command:
    1. dmesg | grep USB
      • Make note of the number after /dev/ttyUSB (it’s usually 0), then:
    2. chmod 666 /dev/ttyUSB0
  5. Get router to boot from the UART image:
    1. ./kwboot –a –t /dev/ttyUSB0 –b u-boot-uart.kwb and Power On Router
      • Note arguments used above:
        • -a = use Armada XP timings
        • -t = open a terminal in the same window after transfer completes
        • -b = file that is to be booted from
  6. After transfer finishes, you should be at the Marvell » prompt:
    1. If you are not:
      1. Power Off Router → Disconnect USB-TTL Cable from PC → Go Back to Step 3
    2. If you are:
      1. Set up TFTP server on PC (such as Ubuntu’s tftpd package)
      2. Put u-boot-nand.kwb in it’s tftpboot folder
  7. Connect PC to router (ethernet), set PC IP Address 192.168.1.2, and issue the following at the Marvell » prompt:
    1. setenv ipaddr 192.168.1.1
    2. setenv serverip 192.168.1.2
    3. tftp 2000000 u-boot-nand.kwb
    4. nand erase 0 e0000
    5. nand write 2000000 0 e0000
  8. If the above commands complete successfully, reboot router via:
    1. reset
      • You should see the router booting and stopping at the Marvell » prompt
  9. Download the firmware image for WRT1900AC v1 and save it to tftpboot:
    1. Issue the following commands at the Marvell » prompt:
      1. tftp 192.168.1.2
      2. get firmware_image_name
  10. IMPORTANT:
    • After transfer completes successfully, DO NOT issue:
      • run flash_pri_image or run flash_alt_image or run update_both_images
        • These will brick the router again sending you back to Step 3
    1. Instead:
      1. run_linksysnandboot
        1. If it fails, issue: run_linksysaltnandboot
  11. Allow router to boot fully:
    1. Verify it’s up and running correctly via the WebUI
    2. Finally, Power Off Router → Disconnect USB-TTL Cable → Power Back On
Armada 385

Armada 385

  1. Terminal root access:
    1. sudo –i
  2. Install kwboot:
    1. cd /home/kwboot
      1. Unzip the archive, then: tar –xvf kwboot.tar
        • Actual compilation of kwboot: gcc kwboot.c
    2. Save u-boot-a38x-spi-uart.bin and u-boot-a38x-spi.bin in /home/kwboot
  3. Set kwboot as executable:
    1. Chmod 777 kwboot
  4. Connect USB-TTL to router and PC (don’t power on router) & issue the following command:
    1. dmesg | grep USB
      • Make note of the number after /dev/ttyUSB (it’s usually 0), then:
    2. chmod 666 /dev/ttyUSB0
  5. Get router to boot from the UART image:
    1. ./kwboot -t /dev/ttyUSB0 -b u-boot-a38x-spi-uart.bin and Power On Router
      • Note arguments used above:
        • -b = file that is to be booted from
        • -t = open a terminal in the same window after transfer completes
  6. After transfer finishes, you should be at the Marvell » prompt:
    1. If you are not:
      1. Power Off Router → Disconnect USB-TTL Cable from PC → Go Back to Step 3
    2. If you are:
      1. Set up TFTP server on PC (such as Ubuntu’s tftpd package)
      2. Put u-boot-a38x-spi.bin in it’s tftpboot folder
  7. Connect PC to router (ethernet), set PC IP Address 192.168.1.2, and issue the following at the Marvell » prompt:
    1. setenv ipaddr 192.168.1.1
    2. setenv serverip 192.168.1.2
    3. bubt u-boot-a38x-spi.bin
  8. If the above commands complete successfully, reboot router via:
    1. reset
      • You should see the router booting and stopping at the Marvell » prompt
  9. Download the firmware image for your Armada_38x based device and save it to tftpboot:
    1. Issue the following commands at the Marvell » prompt:
      1. tftp 192.168.1.2
      2. get firmware_image_name
  10. IMPORTANT:
    • After transfer completes successfully, DO NOT issue:
      • run flash_pri_image or run flash_alt_image or run update_both_images
        • These will brick the router again sending you back to Step 3
    1. Instead:
      1. run_linksysnandboot
        1. If it fails, issue: run_linksysaltnandboot
  11. Allow router to boot fully:
    1. Verify it’s up and running correctly via the WebUI
    2. Finally, Power Off Router → Disconnect USB-TTL Cable → Power Back On

Dependency Errors

Problem: Dependency errors are received when installing pkgs

Solution: This is an either/or occurrence

  1. /etc/opkg.conf is pointing to the wrong repository

    rm /etc/opkg.conf ; cp /rom/etc/opkg.conf /etc/opkg.conf ; opkg update

  2. Package repository has been updated to comply with an updated kernel version
    • Flash, or build, a new image with the updated kernel version

Firmware Recovery

contributed by edgeman
Manually switch the router from primary to alternate partition or vice versa [backup] partition:

  1. Power off router with power switch.
  2. Turn power back on and Power LED will light.
    1. As soon as all LEDs turn off (~2s), power off router with power switch
  3. Turn power back on and Power LED will light.
    1. As soon as all LEDs turn off (~2s), power off router with power switch
  4. Turn power back on and Power LED will light.
    1. As soon as all LEDs turn off (~2s), power off router with power switch
  5. Turn power back on and allow router to fully boot.
    • It should now be booted to the alternate firmware partition (partitions)

LuCI

Chrome & HTTPS

Problem: LuCI will not load when utilizing Chrome [due to PolarSSL]

  • Chrome [v51+] requires AES-GCM and CAMELLIA-GCM ciphersuites to successfully handshake with a server using the ustream-polarssl backend.
    • If CONFIG_GCM is disabled, ssl_ciphersuite_from_id() will return NULL when cipher 0x9d is looked up TLS_RSA_WITH_AES_256_GCM_SHA384
      • This results with the call ssl_ciphersuite_match() to fail with POLARSSL_ERR_SSL_INTERNAL_ERROR (RFC 5288)

Solution:

  1. LEDE offers a backport, enabling AES-GM and CAMELLIA-GCM ciphersuites in PolarSSL;
    OR
  2. Completely remove all PolarSSL related components from your build environment, switching to OpenSSL
    • Certain packages default to PolarSSL [libustream-polarssl] and will require edited makefiles
    • In the case of cshark, it is not compatible with OpenSSL (unsure about other SSL platforms)

DHCP & DNS

Problem: Active DHCP Leases list enumerates all statically assigned IPs as active, listing all with a netmask of /32.

  • If utilizing Kernels 4.1.x or 4.4.x, there appears to be an issue with how odhcpd interacts with dnsmasq, resulting in the aforementioned

Solution:

  1. Uninstall odhcpd & odhcpd6 and install dnsmasq-full in lieu of;
    OR
  2. Comment it out of /etc/config/dhcp

Revert to Default Settings

To reset all settings to default, execute the firstboot script via ssh: (or LuCI if luci-app-commands is installed)

/sbin/firstboot

Serial Port

Synopsis

Serial Port is labeled J1 on the board, utilizing a JST PH 6 pin connector, with a 2.0mm pitch

  • The more common 2.54mm pitch will not fit properly.
    • In a pinch, removing the plastic casing from 2.54mm female connectors allows for a stable enough connection.
      • Ensure leads are insulated with electrical tape
  • If flashing regularly, you may wish to invest in a USB-TTL AJ cable
    • USB-TTL AJ cables require installation of a 3.5mm Jack (F) on the router

Serial Header

Pin Out
Pin Out
Pins 1 2 3 4 5 6
Function Gnd Tx n/a Rx n/a VCC
Header
Header
WRT AC Series Header

On the Armada XP & 385's, Serial Port is labeled J10, with the triangle indicating Pin 6

USB-TTL AJ

Pin Out
Pin Out
Serial Port 1 (Gnd) 2 (Tx) 4 (Rx)
Male Jack Base Tip Ring
Cable
Cable
USB-TTL AJ Cable

Tip & Ring wires will vary depending on manufacturer; pictured above is an FTDI cable

3.5mm Jack Install

3.5mm Jack (F)

WRT AC Series Female Audio Jack Install

  • There are a number of different PCB 3.5mm female jack variations
    • All come in 6 types, 1 pin - 6 pin (must have at least 3 pins)
  • Placement location is personal preference
    • For example, there are several vertical ridges on the case interior which can be trimmed off with a diagonal cutter to make room for the jack
  • A 6.35mm [.25"] mounting hole should be sufficient; above all, measure twice, cut once


Recommendations

  • 3.5mm terminals should be insulated
    • Adhesive lined heat-shrink tubing would be ideal for covering the 3.5mm terminals (3.175mm [1/8"] in diameter)
      • While regular heat-shrink tubing will work, adhesive lined provides strong stability to the joint due to thicker walls & rigidity from the adhesive once cured
  • Recommended way to shrink tubing is with a heat gun, set to ~260C (500F), and it's blower on low
    • Heat gun should be kept in constant motion, ~20cm (~8") away from the tubing, never leaving it stationary on one spot
      • If tubing begins to change color (darkening, glossiness, etc.) or bubble/expand, temperature is too high

Arduino

Pin Out
Pin Out
Serial Port 1 (Gnd) 2 (Rx) 4 (Tx)
Pins Gnd 0 1
Header
Header
Arduino Uno R3 Header

MAX232

Pin Out
Pin Out
Serial Port 1 (Gnd) 2 (Rx) 4 (Tx)
Pins Gnd 1 0
Line Driver
Line Driver
Max232 RS-232 Line Driver (Bottom)

Converts TTL level RS-232 signals to standard 12v utilized by most RS-232 interfaces

Serial Firmware Flash

Prerequisites

USB-TTL Cable

USB-TTL cable

Serial Interface

Windows Serial Profile PuTTY Serial Interface
PC running TFTP Server

  • Windows profile is set to COM3, please update accordingly
    • Line 206: "SerialLine"="COM3"
    • Via PuTTY: PuTTYSerial Line
  • Once downloaded, right-click on registry key, select merge, then OK
    • When PuTTY is opened/re-opened after the merge, profile Serial will be available to select
  • Serial Values:
    • BAUD Rate: 115200
    • Data Bits: 8
    • Stop Bits: 1
TFTP Server

Windows Config TFTPd32 TFTP Server
PC connected to router via ethernet

  • tftpd32.ini must be placed in the TFTP root folder with the executable
    • Line 36: BaseDirectory=D:\TFTP\FLASH
    • Via TFTPd: TFTPd → Current Directory
      • Must reflect image file location and cannot contain spaces
OEM Default Names

OEM Default Names

Instructions

  1. Connect USB-TTL cable to router serial header & PC (router off)
    • This assumes prerequisites have been completed:
      1. USB-TTL drivers are installed
      2. Serial interface is set to correct COM port
      3. Correct serial values have been set
        1. BAUD Rate
        2. Data Bits
        3. Stop Bits
  2. Set LAN IP to subnet 192.168.1.2/24 [255.255.255.0]
  3. Load Serial profile in PuTTY & open TFTP server
    • There should be a blank terminal window
  4. Boot WRT AC Series router
    • There should be U-boot output in terminal window
  5. At 3 second autoboot interrupt delay, press any key
  6. Issue following commands:
    1. setenv ipaddr 192.168.1.1
    2. setenv netmask 255.255.255.0
    3. setenv serverip 192.168.1.2
    4. run update_both_images
  7. Reboot via power switch or by issuing:
    1. reset

Flash Output

Successful

Successful Flash
WRT1900AC v1

...
Hit any key to stop autoboot:  3  2  1
 
Marvell >> setenv ipaddr 192.168.1.1
Marvell >> setenv netmask 255.255.255.0
Marvell >> setenv serverip 192.168.1.2
Marvell >> run flash_pri_image
mvNetaSpeedDuplexSet
Using egiga0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.1
Filename 'blk-mamba.128mb.img'.
Load address: 0x2000000
Loading: #################################################################
	 #################################################################
	 #################################################################
         ###
         5.6 MiB/s
done
Bytes transferred = 33292288 (1fc0000 hex)
NAND erase: device 0 offset 0xa00000, size 0x4000000
Erasing at 0x49e0000 -- 100% complete.
OK
NAND write: device 0 offset 0xa00000, size 0x1fc0000
33292288 bytes written: OK

Unsuccessful

Unsuccessful Flash
WRT1900AC v1

...
Hit any key to stop autoboot:  3  2  1
 
Marvell >> setenv ipaddr 192.168.1.1
Marvell >> setenv netmask 255.255.255.0
Marvell >> setenv serverip 192.168.1.2
Marvell >> run flash_pri_image
mvNetaSpeedDuplexSet
Using egiga0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.1
Filename 'blk-mamba.128mb.img'.
Load address: 0x2000000
Loading: T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T
         T T T
done
Bytes transferred = 0 (00000000 hex)
NAND erase: device 0 offset 0xa00000, size 0x4000000
Erasing at 0x49e0000 -- 100% complete.
OK
NAND write: device 0 offset 0xa00000, size 0x1fc0000
0 bytes written: OK

WiFi

Missing Drop Down Values

To accommodate a wider variety of kernels for compatibility with the series, path values were modified.
While appearing okay for certain versions, if experiencing missing drop down values, add platform back to path.

/etc/config/wireless

Armada XP

radio0
2.4gHz

option  path    'platform/soc/soc:pcie-controller/pci0000:00/0000:00:02.0/0000:02:00.0'
radio1
5.8gHz
option  path    'platform/soc/soc:pcie-controller/pci0000:00/0000:00:03.0/0000:03:00.0'

Armada 385

radio0
2.4gHz

option  path    'platform/soc/soc:pcie-controller/pci0000:00/0000:00:01.0/0000:01:00.0'
radio1
5.8gHz
option  path    'platform/soc/soc:pcie-controller/pci0000:00/0000:00:02.0/0000:02:00.0'


Historical

The following information has been superceded by current builds and is included only for historical interest.

Drivers

  • On Christmas Eve 2014, Marvell released an updated driver for the 88W8864 WiFi chip as found in the WRT1900AC to the openwrt developers mailing list
  • Wireless driver was announced to stay closed source on 30th of July. It'll likely consist of pre-built closed source part (so called "library") and probably some open source file calling kernel APIs.
    • Oddly, the wireless driver source was later distributed as part of the GPL release of the stock Linksys firmware. This driver requires significant refactoring before it can be included in OpenWrt.

Firmware

  • Chadster's McWRT release, based on Attitude Adjustment [AA], which is obsolete, and not supported: McWRT
  • Kaloz's evolving snapshots of the Development Branch Kaloz's Build (incorporating latest bug fixes/features, LuCI, & other packages).
  • Lifehacksback evolving snapshots of the Development Branch (both 3.18 and 4.0 kernel builds) Lifehacksback Testing CC
  • At this time it is now possible to compile an image off the Development Branch with this new driver. A prebuilt image can be found here: Development Branch

Hardware

News

Patches

  • On the 3rd of April 2014, Belkin posted a link to ftp server containing patches, adding WRT1900AC support. They couldn't be applied because of being incorrectly posted, not signed off, and adding binary wireless driver ap8x.ko.
    • 5 days later a patchset in the form of single e-mail was posted to the openwrt-devel. It was malformed and not signed off, so still couldn't be applied. Release of wireless driver has been postponed.

Tags

toh/linksys/wrt_ac_series.txt · Last modified: 2017/04/16 02:55 by peake