Cisco Linksys WVC54GCA
Wired & Wireless IP Camera, same hardware as Sitecom WL-404 v1
| CPU || Ram || Flash || Network || USB || Serial || JTag
| Geode G1@?MHz || 32MiB || 4MiB || 1 x FastE || No || ? || ?
| Architecture: x86-32 Geode
| Vendor: NSC, now AMD
| Bootloader: ?
| System-On-Chip: AMD Geode SC1100
| CPU Speed: unknown, but between 200 and 300 Mhz
| Flash-Chip: Macronix 29LV320C BTC-70G
| Flash size: 4 MiB
| RAM: 32 MiB SDRam
| Wireless: Railink RT2561 802.11b/g (mini pci)
| Ethernet: Davicom DM9102DEP
| USB: No
| Serial: ?
| JTAG: ?
| Audio: Realtec ALC203
Opening the case
Note: This will void your warranty!
I have not managed to open the Cisco Linksys case myself for fear of destroying the camera. I did open the Sitecom case though. I assume the Sitecom and Linksys hardware is the same because my photo's look similar to [these photo's[http://www.brianklug.org/2010/01/zoneminder/]]
. From the pictures it looks as though the Cisco variant omits the speaker out jack and the real time clock.
How to connect to Serial Port:
Anything else we haven't covered yet