User Tools

Site Tools

This wiki is read only and for archival purposes only. >>>>>>>>>> Please use the new OpenWrt wiki at <<<<<<<<<<

Netgear firmware boot log

Initiating BCM5380 ... ok
+starting api entry
Ethernet eth0: MAC address 00:14:6c:cb:xx:xx
IP:, Gateway:
Default server:, DNS server IP:
RedBoot(tm) bootstrap and debug environment [ROM]
Red Hat certified release, version 1.92p1 - built 19:39:46, Dec 11 2004
Platform: NetGear FVX538 (XScale)
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.
RAM: 0x00000000-0x02000000, 0x0001e758-0x01fdd000 available
FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each.
RedBoot> boot
Partition    Priority Firm/Cfg-Ver   BuildTime                FileName
appimg1(V)          3 2.0.1-5/1.0   Tue Nov 21 14:24:47 2006 fvx538_v2.0.1-5.img
appimg2(V)          4 2.0.1-5/1.0   Tue Nov 21 14:24:47 2006 fvx538_v2.0.1-5.img
Booting application image from partition appimg2 ...
Downloading Image to RAM location 0x1600000 ...
Transfering control to downloading Image at address 0x160024c ...
powering down the PHYs
Uncompressing Linux............................................................................................................. done, booting the kernel.
Linux version 2.6.10_mvl401 (build@TeamF1 Copyright (c) 2006, TeamF1, Inc.) (gcc version 3.4.3 (MontaVista 3.4.3- 2005-07-23)) #164 Tue Nov 21 14:24:29 IST 2006
CPU: XScale-IXP42x Family [690541c1] revision 1 (ARMv5TE)
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Machine: Netgear FVX538
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists
Kernel command line: console=ttyS0,115200
PID hash table entries: 256 (order: 8, 4096 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 32MB = 32MB total
Memory: 28672KB available (1612K code, 454K data, 1668K init)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
desched cpu_callback 3/00000000
ksoftirqd started up.
desched cpu_callback 2/00000000
desched thread 0 started up.
NET: Registered protocol family 16
PCI: IXP4xx is host
PCI: IXP4xx Using direct access for memory space
PCI: bus0: Fast back to back transfers enabled
dmabounce: registered device 0000:00:01.0 on pci bus
dmabounce: registered device 0000:00:0f.0 on pci bus
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
ttyS0 at MMIO 0xc8001000 (irq = 13) is a XScale
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP BSD Compression module registered
NET: Registered protocol family 24
r8169 Gigabit Ethernet driver 1.2 loaded
eth0: RTL8169 at 0xc280e000, 00:14:6c:cb:xx:xx, IRQ 7
elevator: using anticipatory as default io scheduler
IXP4XX-Flash0: Found 1 x16 devices at 0x0 in 16-bit bank
 Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Searching for RedBoot partition table in IXP4XX-Flash0 at offset 0xfe0000
6 RedBoot partitions found on MTD device IXP4XX-Flash0
Creating 6 MTD partitions on "IXP4XX-Flash0":
0x00000000-0x00040000 : "RedBoot"
0x00040000-0x007c0000 : "appimg1"
0x007c0000-0x00f40000 : "appimg2"
0x00f40000-0x00fc0000 : "igwpri"
0x00fc0000-0x00fc1000 : "RedBoot config"
0x00fe0000-0x01000000 : "FIS directory"
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
ip_conntrack version 2.1 (256 buckets, 2048 max) - 360 bytes per conntrack
ip_conntrack_rtsp v0.01 loading
ip_nat_rtsp v0.01 loading
ip_tables: (C) 2000-2002 Netfilter core team
netfilter PSD loaded - (c) astaro AG
ipt_account 0.1.7 : Piotr Gasid³o ,
ipt_time loading
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear 
All bugs added by David S. Miller 
Freeing init memory: 1668K
Booting XScale UserSpace
Linux (none) 2.6.10_mvl401 #164 Tue Nov 21 14:24:29 IST 2006 armv5teb unknown
Starting system...
Mounting /proc: done.
Mounting '/' read-write: done.
Brining up loopback interface: done.
Mounting /tmp: mount: Mounting /tmpfs on /tmp failed: Invalid argument
Starting portmap: done.
Setting Hostname: done.
Running ixpInit
ixp400_eth: Initializing IXP400 NPE Ethernet driver software v. 1.5.1
ixp400_eth: CPU clock speed (approx) = 532 MHz
ixp400_eth: ixp0 is using NPEB and the PHY at address 4
ixp400_eth: ixp1 is using NPEC and the PHY at address 12
ixp400_eth: Use default MAC address 00:02:b3:01:xx:xx for port 0
ixp400_eth: Use default MAC address 00:02:b3:02:xx:xx for port 1
Running usrInit
Enabling Quite Boot...Done
Initializing interfaces...Done
Loading Modules...Done
Creating devices...Done
Enabling Cavium...Done
Enabling Forwarding...Done
Setting hostname as FVX538...Done
Initializing System Files...Done
Starting DNS Proxy...Done
Starting Cron...Done
Starting Inetd...Done
Starting HTTP Daemon...Done
Starting WAN daemon...Done
Starting Lan Scanner...Done
Starting Factory Reset Daemon...Done
Starting IKE Daemon...Done
Resetting Configuration...Done
Loading Configuration...Done
Copyright (c) 2006, TeamF1, Inc.
System started.
FVX538 login: exovii
               Welcome To The Netgear FVX538 Command Line Interface

toh/netgear/fvx538/bootlog.txt · Last modified: 2010/10/04 22:12 by jow