User Tools

Site Tools


toh:netgear:telnet.console
This wiki is read only and for archival purposes only. >>>>>>>>>> Please use the new OpenWrt wiki at https://openwrt.org/ <<<<<<<<<<

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
toh:netgear:telnet.console [2018/01/02 06:45]
tchebb [Unlocking the Netgear Telnet Console] Add EX6100v2
toh:netgear:telnet.console [2018/01/19 23:12] (current)
ErikZ Added wnr2000v2
Line 44: Line 44:
     - BusyBox 0.60.0 worked after a hard reset (power on holding reset button until lights flash)     - BusyBox 0.60.0 worked after a hard reset (power on holding reset button until lights flash)
     - firmware prior to latest was not tested, but expect the old TCP utility was required, per WGR614v10     - firmware prior to latest was not tested, but expect the old TCP utility was required, per WGR614v10
 +  * WNR2000 v2: works; does not require username/​password for login. On connection to stock, Busybox header is shown. Use old TCP method. Gearguy/​Geardog
   * WNR2000 v4: works; does not require username/​password for login. On connection the '#'​ prompts is displayed.   * WNR2000 v4: works; does not require username/​password for login. On connection the '#'​ prompts is displayed.
   * WNR2200 v1: works; does not require username/​password for login. Uses Gearguy/​Geardog and the old TCP method. Displays OpenWrt header on connect (stock firmware)   * WNR2200 v1: works; does not require username/​password for login. Uses Gearguy/​Geardog and the old TCP method. Displays OpenWrt header on connect (stock firmware)
toh/netgear/telnet.console.txt · Last modified: 2018/01/19 23:12 by ErikZ