Differences

This shows you the differences between two versions of the page.

toh:netgear:wndr3300 [2012/10/04 18:34]
knetknight
toh:netgear:wndr3300 [2014/01/05 11:27] (current)
danitool
Line 12: Line 12:
2. WNDR3300 will reboot into DD-WRT and be set to default 192.168.1.1. 2. WNDR3300 will reboot into DD-WRT and be set to default 192.168.1.1.
-3. Browse to http://192.168.1.1, set credentials, then browse to the administration tab and upload an OpenWrt firmware. I used this 7.09 wrt150n firmware:+3. Browse to http://192.168.1.1, set credentials, then browse to the administration tab and upload an OpenWrt firmware. I used this 7.09 WRT150N firmware:
http://downloads.openwrt.org/kamikaze/7.09/brcm-2.4/openwrt-wrt150n-2.4-squashfs.bin http://downloads.openwrt.org/kamikaze/7.09/brcm-2.4/openwrt-wrt150n-2.4-squashfs.bin
Line 18: Line 18:
4. WNDR3300 will reboot into default OpenWrt. 4. WNDR3300 will reboot into default OpenWrt.
-5. Like the WRT150N, you will need to "ipkg kmod-brcm-wl-mimo" and "wifi detect > /etc/config/wireless" to get basic WiFi working. To the best of my knowledge this supports only 2.4GHz -- 5GHz is not working but that could be my own limited understanding.+5. Like the WRT150N, you will need to "ipkg install kmod-brcm-wl-mimo" and "wifi detect > /etc/config/wireless" to get basic WiFi working. To the best of my knowledge this supports only 2.4GHz -- 5GHz is not working but that could be my own limited understanding.
May work with other builds but this was my successful starting point. May work with other builds but this was my successful starting point.
 +
 +====== Netgear WNDR3300v2 ======
 +
 +According to [[https://apps.fcc.gov/oetcf/eas/reports/ViewExhibitReport.cfm?mode=Exhibits&RequestTimeout=500&calledFromFrame=N&application_id=439394&fcc_id=PY309300116|FCC]] the device is identical to the [[/toh/netgear/wndr3300|Netgear WNDR3400v1]].
 +
 +===== Tags =====
 +{{tag>bcm47xx bcm4704}}

Back to top

toh/netgear/wndr3300.1349368440.txt.bz2 · Last modified: 2012/10/04 18:34 by knetknight