User Tools

Site Tools


toh:t-com:spw501v

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

toh:t-com:spw501v [2014/02/16 20:43]
toh:t-com:spw501v [2015/12/14 19:28] (current)
tmomas New bootlog formatting applied
Line 1: Line 1:
 +====== T-Home Speedport W 501V ======
 +The T-Home Speedport W 501V is an IAD sold by Deutsche Telekom with an ADSL2+ Annex B Modem, 802.11bg Wifi and two FXS ports. The device is manufactured by AVM.
  
 +| {{:​meta:​icons:​tango:​48px-emblem-progress.svg.png?​nolink}} | This device is **not supported** yet.|
 +
 +{{page>​meta:​infobox:​construction&​noheader&​nofooter&​noeditbtn}}
 +
 +===== Supported Versions =====
 +^ Version/​Model ​  ^ Launch Date   ^ S/N   ^ OpenWrt Version Supported ​  ^ Model Specific Notes   ^
 +| Typ A           ​| ​      ​- ​      | -     ​| ​             -              | -                      |
 +===== Hardware Highlights =====
 +^ SoC                   ^ Ram      ^ Flash   ^ Network ​  ^ USB   ^ Serial ​  ^ JTag   ^
 +| TNETD7200ZDW@211Mhz ​  | 16 MiB   | 4 MiB   | 1 x 1     | No    | Yes      | ?      |
 +
 +User manual (in German): [[|Bedienungsanleitung]]
 +
 +===== Installation =====
 +This device is **not supported** yet.
 +
 +==== Flash Layout ====
 +
 +This is the default flash layout as reported by the bootloader:
 +<​code>​
 +</​code>​
 +
 +==== Flash custom firmware ====
 +
 +==== Buttons ====
 +-> [[doc:​howto:​hardware.button]] on howto use and configure the hardware button(s).
 +
 +===== Hardware =====
 +==== Info ====
 +| **[[wp>​Instruction set]]:​** ​              | [[wp>​MIPS architecture|MIPS]] |
 +| **Vendor:​** ​                              | [[wp>​AVM]] |
 +| **[[doc:​techref:​Bootloader]]:​** ​          | ADAM2 |
 +| **[[doc:​hardware:​soc|System-On-Chip]]:​** ​ | TNETD7200ZDW |
 +| **[[doc:​hardware:​cpu|CPU]] @Frq** ​        | MIPS 4KEc @211MHz|
 +| **Flash size:​** ​                | 4 MiB |
 +| **Flash Chip:​** ​                | [[http://#| TE28F320C3TD70 ]] |
 +| **RAM size:​** ​                  | 16 MiB   |
 +| **RAM Chip:​** ​                  | [[http://#| K4S281632F-UC75 ]]  |
 +| **ISDN** ​              ​  ​ | [[http://#​|?​]] |
 +| **Wireless** ​              ​  ​ | TNETW1350A |
 +| **[[doc:​hardware:​Switch]]:​** ​   | - |
 +| **[[doc/​hardware/​internet.access.technologies|Modem]]:​** ​  | ADSL2+|
 +| **USB:​** ​                       | Supported, but not assembled |
 +| **[[doc:​hardware:​port.serial|Serial]]:​** ​ | [[#​Serial|Yes]] |
 +| **[[doc:​hardware:​port.jtag|JTAG]]:​** ​     | [[#​JTAG|?​]] ​  |
 +
 +==== Photos ====
 +Typ A
 +
 +//Front://
 +|{{http://​wehavemorefun.de/​fbwiki/​images/​8/​85/​Speedport_W_501V-BildN.jpg?​400|}}|
 +
 +//Back://
 +|{{http://​wehavemorefun.de/​fbwiki/​images/​3/​30/​Speedport_W_501V-BildS.jpg?​400|}}|
 +
 +//Ports://
 +|{{http://​wehavemorefun.de/​fbwiki/​images/​a/​ae/​Speedport_W_501V-BildO.jpg?​400|}}|
 +
 +Photos CC-BY-SA: [[http://​wehavemorefun.de/​fritzbox/​User:​Hosimosi|Hosimosi]]
 +==== Opening the case ====
 +**Note:** This will void your warranty! \\
 +
 +//Main PCB://
 +|{{http://​wehavemorefun.de/​fbwiki/​images/​5/​57/​Speedport_W_501V-BildU.jpg?​400|}} {{http://​wehavemorefun.de/​fbwiki/​images/​7/​7e/​Speedport_W_501V-BildT.jpg?​400|}} |
 +
 +==== Serial ====
 +-> [[doc:​hardware:​port.serial]] general information about the serial port, serial port cable, etc.
 +
 +Serial port settings: 38400 8N1 
 +
 +===== Debricking =====
 +-> [[doc:​howto:​generic.debrick]] \\
 +
 +===== Bootlogs =====
 +==== OEM bootlog ====
 +<WRAP bootlog>
 +<​nowiki>​Insert bootlog here</​nowiki>​
 +</​WRAP>​\\
 +
 +===== Tags =====
 +[[meta:​tags|How to add tags]]
 +{{tag>​FastEthernet 1NIC 1WNIC 1Port 16RAM 4Flash 802.11bg MIPS MIPS32 ADSL2+ fxo}}