T-Home Speedport W 503V Typ C (ARV8528PW22)

The T-Home Speedport W 503V Typ C (ARV8528PW22) is an IAD sold by Deutsche Telekom with an ADSL2+ Annex B/J Modem, 802.11abgn Wifi and two FXS ports as well as a S0 bus connector.
The device is manufactured by Arcadyan.

This device is very different from the Speedport W503 Typ A!


Under Construction!
This page is currently under construction. You can edit the article to help completing it.


This device is not supported yet.

Supported Versions

Version/Model Launch Date S/N OpenWrt Version Supported Model Specific Notes
Typ C - - - -

OEM source code is not available. Factory firmware: Speedport W503V Typ C v.1.10.000

Hardware Highlights

SoC Ram Flash Network USB Serial JTag
Lantiq Xway Danube @333Mhz Dual Core 64 MiB 4 MiB 4 x 1 Yes Yes ?


User manual (in German): Bedienungsanleitung

Installation

This device is not supported yet.

Flash Layout

This is the default flash layout as reported by the bootloader:

---------------------------------------
    Area            Address      Length 
--------------------------------------- 
[0] Boot            0xB0000000     128K
[1] Configuration   0xB0020000     192K
[2] Image 0         0xB0050000    3712K
[3] Image 1         0xB0050000    3712K
[4] Boot Params     0xB03F0000      64K
[5] Flash Image     0xB0000000    4096K
---------------------------------------

Please note that area/partition "[5] Flash Image" is the complete flash, so do never try to erase or reflash this area. Also don't mess with areas 0, 1 and 4 as you might brick your device.

Flash custom firmware

brnboot
Start your serial terminal, press the space bar 3 times (as soon as the device is powered on) to access the bootloader. The access password are the first 4 digits of your "Gerätepasswort" (device password). Press return to see help menu. Press "!" to access the hidden administrator mode with extended options. Press "k" to run the minikernel, which will run a webserver on 192.168.2.1:80 with recovery options.

Buttons

hardware.button on howto use and configure the hardware button(s).

Hardware

Info

Instruction set: MIPS
Vendor: Lantiq
Bootloader: brnboot
System-On-Chip: Lantiq Danube
CPU @Frq MIPS 24KEc @333MHz
Flash size: 4 MiB
Flash Chip: EON EN29LV320B
RAM size: 64 MiB
RAM Chip: PSC A3S12D40ETP
ISDN ?
Wireless AR9220-AC1A
Switch: AR8216-BH1A
Modem: ADSL2+
USB: NO
Serial: Yes
JTAG: ?

Photos

Typ A

Front:

Photo of front of the casing, coming soon

Back:

Photo of back of the casing, coming soon

Opening the case

Note: This will void your warranty!

Main PCB:

Serial

port.serial general information about the serial port, serial port cable, etc.

J8 is located in the center of the PCB.

4 Vcc 3.3V
3 TX
2 RX
1 GND

speedport_w503v_serial_pinout.jpg

115200 baud, 8N1

Debricking

Enable UART

Bootlogs

OEM bootlog

ROM VER: 1.0.3 CFG 01 Readà ROM VER: 1.0.3 CFG 01 Read EEPROMX X ======================================================================= Wireless ADSL IAD 503 DANUBE Loader v1.02.04 build Mar 6 2009 11:34:36 Arcadyan Technology Corporation ======================================================================= EON EN29LV320B bottom boot 16-bit mode found Copying boot params.....DONE Press Space Bar 3 times to enter command mode ... Flash Checking Passed. Unzipping firmware at 0x80002000 ... with AREA[2][ZIP 3] [ZIP Extra] [ZIP 1] done Ready to run firmware In c_entry() function ... install_exception Co config = 80008483 [INIT] Interrupt ... ##### _ftext = 0x80002000 ##### _fdata = 0x80538D60 ##### __bss_start = 0x805F2C7C ##### end = 0x82AAFD44 allocate_memory_after_end: alloc from 82AB7D50 to 82B71C80, length=761628 ##### Backup Data from 0x80538D60 to 0x82AB7D44~0x82B71C60 len 761628 ##### Backup Data completed ##### Backup Data verified [GPIO FLOW] SetGpio() Begin .. [GPIO FLOW] SetGpio() End. [INIT] System Log Pool startup ... [INIT] MTinitialize .. [INIT] usrclk CPU Clock 333333334 Hz mips_counter_frequency:166666667 r4k_offset: 00028b0a(166666) init_US_counter : time1 = 25 , time2 = 32000053, diff 32000028 US_counter = 84 cnt1 32667250 cnt2 32668985, diff 1735 cnt1 33260418 cnt2 33262216, diff 1798 Runtime code version: 1.10.000 System startup... [INIT] Memory COLOR 0, 2548576 bytes .. [INIT] Memory COLOR 1, 10485760 bytes .. [INIT] Memory COLOR 2, 5546928 bytes .. InitCommSys: RESOURCE_BASE = 63, NUMRES = 640 InitCommSys: EVENT_BASE = 119, NUMEVT = 818 InitCommSys: MAILBOX_BASE = 6, NUMMBX = 64 rzMemory start: 0x81614E34, end 0x819F8F44, size 4079888 Build Day = Jan 10 2011 >>>>set_MP_pass_Magic to 5 EON EN29LV320B bottom boot 16-bit mode found Set flash memory layout to Boot Parameters found !!! Bootcode version: v1.02.04 Serial number: J004088486 Hardware version: 01A pBootParams->password 35 31 32 (20) Entered default password checking 8 8 fread_config_b> sizeof(struct III_Config_t) is 243680 EON EN29LV320B bottom boot 16-bit mode found fread_config_b> 48140 bytes read from flash fread_config_b> 332890 bytes decompressed successfully. my CFGVersionMagic = 33343536 my CFGsize = 243680, my CFGDescSize = 33297 my Version = 1.10.000 My CfgHexSize:11099 My CFGDescSize:33297 old CFGVersionMagic on flash = 33343536 CFGsize on flash = 243680, CFGDescSize on flash = 33297 Version on flash = 1.07.000 === Old CfgHexSize = 11099, Old CFGDescSize = 33297 Unzipping from 814AC034 to 814A3E10 ... [ZIP 1] allocate_memory_after_end: alloc from 82B71C80 to 82B85B00, length=81516 [ZIP 1 49492c30] done Uncompressed size = 33295 Tail1 : END_III_Config_t Size of Old CFG_DESC is :33295!!! 1.useCfgDesc:1 Unzipping from 814A129C to 81499078 ... [ZIP 1] [ZIP 1 49492c30] done Uncompressed size = 33295 2.useCfgDesc:1 Tail : END_III_Config_t useCfgDesc:3 Restore Config file from ver: 1.07.000 !!! config saved by fw older than 1.08.000, 1.08.999, update gSetting.qm_l1_config[0].qm_func to copy from gConfig to gSetting in restore_config DS_Tail:[t_ARV4528PW] RELEASE_BUF_AND_RETURN_OK - restore_config() #13198, in danube/config.c - restore_config() #13203, in danube/config.c restore config OK. nCfgDescLen=254787. -----------------------> Checking SysLog in Flash OK. nLen=78103 -----------------------> Restore SysLog from Flash 78082 bytes from 3e349 -----------------------> Restore Call Log from Flash 15 bytes from 51452 !!! Invalid wireless channel range 0 ~ 255 !!! Use default value 1 ~ 13 ====xxx==============================-->425@-230;600(.4/.4/1,.4/3/1) -->425@-230;30(.1/.25/1,.1/3/1) -->600(.9/4.8) -->600(.3/.5,.3/3) -->600(.9/3.9) check_WAN_switch returns 0 default route: 0.0.0.0 BufferInit: BUF_HDR_SZ=160 BUF_ALIGN_SZ=0 BUFFER_OFFSET=384 BUF_BUFSZ0=544 BUF_BUFSZ1=3424 NUM_OF_B0=0 NUM_OF_B1=3000 BUF_POOL0_SZ=0 BUF_POOL1_SZ=10752000 sizeof(BUFFER0)=704,sizeof(BUFFER1)=3584 *BUF0=0x82499fcc *BUF1=0x81a58fac Altgn *BUF0=0x82499fe0 *BUF1=0x81a58fc0 End at BUF0:0x82499fe0, BUF1:0x82499fc0 BUF0[0]=0x82499fe0 BUF1[0]=0x81a58fc0 buffer0 pointer init OK! buffer1 pointer init OK! NetJobTableInit> atheros_tmr_init> base_timer.expire=2147483647 RUNTASK id=1 rapi_tmr_task ... [qm_lnk_init] CLOCKHZ=1000 ... [qm_lnk_init] add if 3 into QM link 0 [qm_cbq_enable] no QM attached [qm_cbq_detach] no QM is attached at link 0 f=3492148201/100000, ns_per_byte=1090005888/100000 New cls: id=0, bw=8080 ns/byte, maxd=0 ms, maxb=32, minb=2, avgpktsz=0, maxpktsz=0, offtime=1, parent=0, borrow=0 pri=0, maxidle=1, minidle=0, maxq=96, clsfg=17 f=2002645667/100000, ns_per_byte=1083109375/100000 New cls: id=1, bw=808080 ns/byte, maxd=0 ms, maxb=16, minb=1, avgpktsz=0, maxpktsz=0, offtime=1, parent=82aacc1c, borrow=82aacc1c pri=5, maxidle=1, minidle=0, maxq=48, clsfg=21 qm_cbq_attach(): cbqp->cbq_res=56 f=90439747/100000, ns_per_byte=1089990048/100000 New cls: id=2, bw=8162 ns/byte, maxd=0 ms, maxb=32, minb=4, avgpktsz=0, maxpktsz=0, offtime=1, parent=82aacc1c, borrow=82aacc1c pri=5, maxidle=1, minidle=0, maxq=48, clsfg=21 f=3846176767/100000, ns_per_byte=1072693248/100000 New cls: id=3, bw=799999999 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=0, maxpktsz=0, offtime=1, parent=82aab61c, borrow=82aab61c pri=0, maxidle=0, minidle=0, maxq=96, clsfg=21 f=3846176767/100000, ns_per_byte=1072693248/100000 New cls: id=4, bw=799999999 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=0, maxpktsz=0, offtime=1, parent=82aab61c, borrow=82aab61c pri=1, maxidle=0, minidle=0, maxq=48, clsfg=23 f=3846176767/100000, ns_per_byte=1072693248/100000 New cls: id=5, bw=799999999 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=0, maxpktsz=0, offtime=1, parent=82aab61c, borrow=82aab61c pri=2, maxidle=0, minidle=0, maxq=48, clsfg=23 f=3846176767/100000, ns_per_byte=1072693248/100000 New cls: id=6, bw=799999999 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=0, maxpktsz=0, offtime=1, parent=82aab61c, borrow=82aab61c pri=3, maxidle=0, minidle=0, maxq=48, clsfg=23 f=3846176767/100000, ns_per_byte=1072693248/100000 New cls: id=7, bw=799999999 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=0, maxpktsz=0, offtime=1, parent=82aab61c, borrow=82aab61c pri=4, maxidle=0, minidle=0, maxq=48, clsfg=23 f=90439747/100000, ns_per_byte=1089990048/100000 New cls: id=8, bw=8162 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=0, maxpktsz=0, offtime=1, parent=82aab61c, borrow=82aab61c pri=6, maxidle=1, minidle=0, maxq=48, clsfg=20 [qm_cbq_reset_dstcp_ctrl] dstcp_ctrl_fg=0x0, dstcp_pkt_delay=0 ms, dstcp_max_burst=6056 bytes CLOCKHZ=1000 gConfig.Interface[0].IP_Addr = 127.0.0.1 gConfig.Interface[0].Subnet_Mask = 255.255.255.255 time = 08/01/2003, 00:00:00 TRAP(linkUp) : send ok! Interface 0 ip = 127.0.0.1 gConfig.Interface[1].IP_Addr = 192.168.2.1 gConfig.Interface[1].Subnet_Mask = 255.255.255.0 ether_register_vlan(1): binding not found ether_init(1): no tagged VLAN ifno=1, vlan=0, vid=1, port_mask=0xf DMA g_desc_list=0x814A85C0 reset GPIO#13. danube_sw_chip_init: in MII mode [VLAN] port: 0x000f, ifCount=1 [ar8216_VLAN_addVID]create a vid 1 vlan_vidmap[5].vid 0 vid 1 [ar8216_VLAN_ASIC_addVID]VID 1 has member 3ff [ar8216_VLAN_addPortVID]add port 2 to vid 1 member [ar8216_VLAN_setPortVID]set port 2 vid 1 [ar8216_VLAN_ASIC_setPortVID]port 2 VID 1 has member 3ff ------->add port 2 to vlan 1 [ar8216_VLAN_addPortVID]add port 3 to vid 1 member [ar8216_VLAN_ASIC_setPortVID]port 2 VID 1 has member 3ff [ar8216_VLAN_setPortVID]set port 3 vid 1 [ar8216_VLAN_ASIC_setPortVID]port 3 VID 1 has member 3ff ------->add port 3 to vlan 1 [ar8216_VLAN_addPortVID]add port 4 to vid 1 member [ar8216_VLAN_ASIC_setPortVID]port 2 VID 1 has member 3ff [ar8216_VLAN_ASIC_setPortVID]port 3 VID 1 has member 3ff [ar8216_VLAN_setPortVID]set port 4 vid 1 [ar8216_VLAN_ASIC_setPortVID]port 4 VID 1 has member 3ff ------->add port 4 to vlan 1 [ar8216_VLAN_addPortVID]add port 5 to vid 1 member [ar8216_VLAN_ASIC_setPortVID]port 2 VID 1 has member 3ff [ar8216_VLAN_ASIC_setPortVID]port 3 VID 1 has member 3ff [ar8216_VLAN_ASIC_setPortVID]port 4 VID 1 has member 3ff [ar8216_VLAN_setPortVID]set port 5 vid 1 [ar8216_VLAN_ASIC_setPortVID]port 5 VID 1 has member 3ff ------->add port 5 to vlan 1 [ar8216_VLAN_addPortVID]add port 0 to vid 1 member [ar8216_VLAN_ASIC_setPortVID]port 2 VID 1 has member 3ff [ar8216_VLAN_ASIC_setPortVID]port 3 VID 1 has member 3ff [ar8216_VLAN_ASIC_setPortVID]port 4 VID 1 has member 3ff [ar8216_VLAN_ASIC_setPortVID]port 5 VID 1 has member 3ff mac_0_init: interface 1 registered to VLAN 1, port_mask=f MAC Address: 00:26:4d:40:03:26 time = 08/01/2003, 00:00:00 TRAP(linkUp) : send ok! Interface 1 ip = 192.168.2.1 gConfig.Interface[2].IP_Addr = 0.0.0.0 gConfig.Interface[2].Subnet_Mask = 0.0.0.0 ether_register_vlan(2): binding not found ether_init(2): no tagged VLAN danube pci startup... PCI clock 33.3MHz DANUBE_GPIO_P1_ALTSEL0=447 DANUBE_GPIO_P1_ALTSEL1=0 DANUBE_GPIO_P1_DIR=91f6 [HWLAN] ifno=2 irno=7 port=0x00000000 [PCI] devtag=00000070 probe=8006ce5c ##### We detect Merlin (PCI) without EEPROM ##### [HWLAN] devtag = 00000070 [HWLAN] Vendor ID 0x168c [HWLAN] Device ID 0x29 [HWLAN] Base Addr 0xb8000000 [HWLAN] SVendor ID 0x168c [HWLAN] SDevice ID 0xee1c [HWLAN] Revision ID 0x1 [HWLAN] interrupt vector 0x1 ath_pci_probe : pdev=0x814a8238 PCI_CACHE_LINE_SIZE : 8 after PCI_LATENCYTIMER pci_read_config_dword( dev_id, 0x40 ) return 32896 ath_pci_probe : dev->name wifi0 T_WIFI_INT=12 dev=0x81a3de6c dev->priv=0x825afc20 call ath_attach 1 : dev 81a3de6c name 81a3eb18 wifi0 ATH_INIT_TQUEUE() : 8007ba68 ??? ATH_INIT_TQUEUE() : 80086a2c ??? ATH_INIT_TQUEUE() : 8008e7cc ??? ATH_INIT_TQUEUE() : 80076824 ??? ATH_INIT_TQUEUE() : 8007a0e8 ??? ATH_INIT_TQUEUE() : 8007ba68 ??? ATH_INIT_TQUEUE() : 80076774 ??? ATH_INIT_TQUEUE() : 80076af4 ??? EEPROM : EEP_MAP_DEFAULT !!!!! Powertable magic: a55a ar5416CheckEepromDef: Read Magic = 0xA55A need_swap = True. EEPROM Endianness is not native.. Changing regDmn[0] 0 regDmn[1] 1f change it to 1f1f [HWLAN] Set HWLAN MAC as LAN MAC .. ath_getchannels> nchan=50 ath_getchannels> nchan=50 ath_getchannels> nchan=50 match:9 Chan Freq RegPwr HT CTL CTL_U CTL_L DFS 1 2412n 20 HT20 1 0 1 N 2 2417n 20 HT20 1 0 1 N 3 2422n 20 HT40 1 0 1 N 4 2427n 20 HT40 1 0 1 N 5 2432n 20 HT40 1 1 1 N 6 2437n 20 HT40 1 1 1 N 7 2442n 20 HT40 1 1 1 N 8 2447n 20 HT40 1 1 1 N 9 2452n 20 HT40 1 1 1 N 10 2457n 20 HT40 1 1 0 N 11 2462n 20 HT40 1 1 0 N 12 2467n 20 HT20 1 1 0 N 13 2472n 20 HT20 1 1 0 N 36 5180n 30 HT20 1 0 1 N 38 5190n 20 HT40 1 0 0 N 40 5200n 30 HT20 1 1 0 N 44 5220n 30 HT20 1 0 1 N 46 5230n 20 HT40 1 0 0 N 48 5240n 30 HT20 1 1 0 N 52 5260n 20 HT20 1 0 1 Y 54 5270n 20 HT40 1 0 0 Y 56 5280n 20 HT20 1 1 0 Y 60 5300n 20 HT20 1 0 1 Y 62 5310n 20 HT40 1 0 0 Y 64 5320n 20 HT20 1 1 0 Y 100 5500n 27 HT20 1 0 1 Y 102 5510n 27 HT40 1 0 0 Y 104 5520n 27 HT20 1 1 0 Y 108 5540n 27 HT20 1 0 1 Y 110 5550n 27 HT40 1 0 0 Y 112 5560n 27 HT20 1 1 0 Y 116 5580n 27 HT20 1 0 1 Y 118 5590n 27 HT40 1 0 0 Y 120 5600n 27 HT20 1 1 0 Y 124 5620n 27 HT20 1 0 1 Y 126 5630n 27 HT40 1 0 0 Y 128 5640n 27 HT20 1 1 0 Y 132 5660n 27 HT20 1 0 1 Y 134 5670n 27 HT40 1 0 0 Y 136 5680n 27 HT20 1 1 0 Y 140 5700n 27 HT20 1 0 0 Y ath_countrycode : 276 ATH_INIT_TQUEUE() : 80075e7c ??? ATH_INIT_TQUEUE() : 80075e7c ??? ATH_INIT_TQUEUE() : 80075e7c ??? dfs_init_radar_filters: dfs->dfs_rinfo.rn_numradars: 0 DFS min filter rssiThresh = 21 DFS max pulse dur = 131 ticks sc->sc_hasclrkey : 1 ieee80211_set11gbasicrates wifi0: 11na rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: 11na MCS: 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 wifi0: 11ng rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: 11ng MCS: 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 wifi0: mac 128.2 phy 13.0 radio 12.0 wifi0: Use hw queue 1 for WME_AC_BE traffic wifi0: Use hw queue 0 for WME_AC_BK traffic wifi0: Use hw queue 2 for WME_AC_VI traffic wifi0: Use hw queue 3 for WME_AC_VO traffic wifi0: Use hw queue 8 for CAB traffic wifi0: Use hw queue 9 for beacons wifi0: Use hw queue 7 for UAPSD call ath_attach 2 : dev 81a3de6c name 81a3eb18 wifi0 [wifi0] : Atheros 9280 : mem=0xb8000000, irq=0 hw_base=0x81234BD4 [HWLAN] hwlan_init() end. time = 08/01/2003, 00:00:00 TRAP(linkUp) : send ok! [HWLAN] hwlan_ioctl() .. Interface 2 ip = 192.168.2.1 [HWLAN] hwlan_ioctl() .. gConfig.Interface[3].IP_Addr = 0.0.0.0 gConfig.Interface[3].Subnet_Mask = 0.0.0.0 ether_register_vlan(3): phy_idx=0 ether_register_vlan(3): record vlan-id 7 in entry 0 ether_init(3): registered to vlan 0, trunk 0 ether_init(3): vlan_tagged=0 ether_init(3): map to physical ifno 3 ppe: ATM init succeeded (firmware version 1.1.0.2.1.13) ATM_UBR Init SAR ifno:3 g_atm_vcc[0] CONN:1 VPI/VCI:1/32 MAC Address: 00:26:4d:40:03:27 Interface 3 ip = 0.0.0.0 gConfig.Interface[5].IP_Addr = 0.0.0.0 gConfig.Interface[5].Subnet_Mask = 0.0.0.0 IFLNK_PPPOE init : (Linkp)ifno = 5 idx = 2 IFLNK_PPPOE init : (Driverp)ifno = 5 idx = 3 Perferred method at Start = 0 Interface 5 ip = 0.0.0.0 gConfig.Interface[8].IP_Addr = 0.0.0.0 gConfig.Interface[8].Subnet_Mask = 0.0.0.0 ether_register_vlan(8): binding not found ether_init(8): no tagged VLAN [HWLAN] ifno=8 irno=7 port=0x00000000 time = 08/01/2003, 00:00:00 TRAP(linkUp) : send ok! [HWLAN] hwlan_ioctl() .. Interface 8 ip = 192.168.2.1 [HWLAN] hwlan_ioctl() .. gConfig.Interface[9].IP_Addr = 0.0.0.0 gConfig.Interface[9].Subnet_Mask = 0.0.0.0 ether_register_vlan(9): binding not found ether_init(9): no tagged VLAN [HWLAN] ifno=9 irno=7 port=0x00000000 time = 08/01/2003, 00:00:00 TRAP(linkUp) : send ok! [HWLAN] hwlan_ioctl() .. Interface 9 ip = 192.168.2.1 [HWLAN] hwlan_ioctl() .. gConfig.Interface[10].IP_Addr = 0.0.0.0 gConfig.Interface[10].Subnet_Mask = 0.0.0.0 ether_register_vlan(10): binding not found ether_init(10): no tagged VLAN [HWLAN] ifno=10 irno=7 port=0x00000000 time = 08/01/2003, 00:00:00 TRAP(linkUp) : send ok! [HWLAN] hwlan_ioctl() .. Interface 10 ip = 192.168.2.1 [HWLAN] hwlan_ioctl() .. gConfig.Interface[11].IP_Addr = 0.0.0.0 gConfig.Interface[11].Subnet_Mask = 0.0.0.0 ether_register_vlan(11): binding not found ether_init(11): no tagged VLAN [HWLAN] ifno=11 irno=7 port=0x00000000 time = 08/01/2003, 00:00:00 TRAP(linkUp) : send ok! [HWLAN] hwlan_ioctl() .. Interface 11 ip = 192.168.2.1 [HWLAN] hwlan_ioctl() .. gConfig.Interface[15].IP_Addr = 0.0.0.0 gConfig.Interface[15].Subnet_Mask = 0.0.0.0 ether_register_vlan(15): phy_idx=0 ether_register_vlan(15): record vlan-id 8 in entry 1 ether_init(15): registered to vlan 1, trunk 0 ether_init(15): vlan_tagged=1 ether_init(15): phy already initialized Interface 15 ip = 0.0.0.0 ruleCheck()> Group: 0, Error: Useless rule index will be truncated, from idx:1 ruleCheck()> Group: 1, Error: Useless rule index will be truncated, from idx:22 ruleCheck()> Group: 2, Error: Useless rule index will be truncated, from idx:0 CBAC rule format check succeed !! reqCBACBuf()> init match pool, Have: 1000 Memory Address: 0x82a477c4 ~ 0x82a4e540 reqCBACBuf()> init timeGap pool, Have: 10000 Memory Address: 0x82a4e540 ~ 0x82a7f294 reqCBACBuf()> init sameHost pool, Have: 2000 Memory Address: 0x82a7f294 ~ 0x82a8ecb4 CBAC rule pool initialized !! [init_if] local_if_mask=0xf07 [init_if] local_wiredif_mask=0x2 [init_if] local_wirelessif_mask=0xf04 [init_if] localorVPN_if_mask=0xf07 1 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 2 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 3 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 5 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 8 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 9 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 10 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 11 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 15 set_timer: ti=0 type=1 ina[00000000] gid[00000000] Init NAT data structure Low priority IF task : 0 RUNTASK id=3 if_task if0... Low priority IF task : 1 RUNTASK id=4 if_task if1... Low priority IF task : 2 RUNTASK id=5 if_task if2... High priority IF task : 3 RUNTASK id=6 if_task if3... Low priority IF task : 8 RUNTASK id=7 if_task if8... Low priority IF task : 9 RUNTASK id=8 if_task if9... Low priority IF task : 10 RUNTASK id=9 if_task if10... Low priority IF task : 11 RUNTASK id=10 if_task if11... High priority IF task : 15 RUNTASK id=11 if_task if15... RUNTASK id=12 timer_task... RUNTASK id=13 conn_mgr... RUNTASK id=14 main_8021x... Build Day = Dec 10 2010 gSetting.Rst_Time (17.02.2010, 08:00)-->year (2010),month (02),day (17),hour (08),min (00)--->(2010/2/17 8:2) RUNTASK id=15 period_task... ========== ADSL Modem initialization OK ! ====== RUNTASK id=16 dhcp_daemon... RUNTASK id=17 dhcp_clt...on interface 15 found signature: 78h 56h 34h 12h ulImgLens=1392620, LENGTH[2]-12=3801076 length checking OK [0] find End at 0xB01A3C00 len=1392620 found signature: 78h 56h 34h 12h ulImgLens=271340, LENGTH[2]-12=3801076 length checking OK [1] find End at 0xB01E6000 len=271340 ---[ ZIP1 head start in 0xB01E6400 ]--- found signature: 78h 56h 34h 12h ulImgLens=150508, LENGTH[2]-12=3801076 length checking OK [2] find End at 0xB020AC00 len=150508 ---[ ZIP1 head start in 0xB020B000 ]--- found signature: 78h 56h 34h 12h ulImgLens=417772, LENGTH[2]-12=3801076 length checking OK [3] find End at 0xB0270C00 len=417772 Image[1] at 0xB0050000, len = 1392620 Image[2] at 0xB01A4000, len = 271340 Image[3] at 0xB01E6400, len = 150508 Image[4] at 0xB020B000, len = 417772 unzip for U/I from 0xb01a4000 size 271340 Unzipping from B01A4000 to 83D00000 ... [ZIP 3] [ZIP 0] [ZIP Extra] [ZIP 1] [ZIP 1 2f534650] done Uncompressed size = 1912664 drive start addr[0]=83d00000, [1]=83ed2f60 httpd: listen at 192.168.2.1:80 httpd: listen at 192.168.2.1:443 RUNTASK httpd... RUNTASK id=21 SSLClient ... g_Client_Cert_Array=0x81614d20 RUNTASK id=22 dnsproxy... RUNTASK id=23 dhcpd_mgmt_task... UPnP is disabled TR64 is enabled TR64 Device initialize success! slot=24 [0] Allocate mailbox 6 [0] Allocate mailbox 7 FirstUseDate:2010-04-19T09:35:26 RUNTASK id=27 wscmain... RUNTASK id=28 wsc_Send_eap_packet... RUNTASK id=29 wsc_Send_UPNP_packet... RUNTASK id=30 WSC_WaitUserAction_Task... Starting Multitask... run_project_task RUNTASK id=31 CMV_task... RUNTASK id=32 ds_tcp_policing... [0] Allocate resource 63, FreeResource = 1 fpiclk=83333333, rmc=16, fpiclk/rmc=5208333 ifx_ssc_clock = 5208333, baud=1000000 ifx_ssc_set_baud: br = 2 call ifx_ssc_init() = 0 call ifx_ssc_open() = 0 SPI_Init! gptu: totally 6 16-bit timers/counters Init timer (4) - OK T_WLAN_INT=2 gSetting.CountryCode=0x8114 gSetting.Interface[T_WLAN_INT].Link_Type=1 RUNTASK id=34 apAppInit... RUNTASK id=37 ScanMIH_task... [qm_cbq_resetclst] n_totalcls=9 init psock cnt=8000 [ds_tcp_policing] rsvbw=15000 Bps [HWLAN] [1] rapi_tmr_task running ifno2dot1x_if[2]=0 ifno2dot1x_if[12]=81 ifno2dot1x_if[8]=82 ifno2dot1x_if[9]=83 ifno2dot1x_if[10]=84 ifno2dot1x_if[11]=85 dot1x_wireless_if_mask=0x1f04 [main_8021x] dot1x_build_if_mapping() completed. Danube MEI version:1.00.07 Unzip DSP firmware ... Unzipping from B01E6400 to 828F2C00 ... [ZIP 1] [ZIP 1 4a140] apAppInit called ???? init rand with sys_time=50 ath_create_vap: ifr.ifr_name = wifi0 (before ioctl) alloc_etherdev: name = wlan0 GetWdsIfno: name = wlan0 GetWdsIfno : return 2 , T_WDS_INT 8 alloc_etherdev> dev->priv = 0x811AE7CC ********** should asigned hard_start_xmit and open in dev structure ??? ReleaseWDS_ni : cnt 0 ath_create_vap: ifr.ifr_name = wlan0 (after ioctl) apAppInit: ath_create_ap, T_WLAN_INT done apAppInit> if_table[T_WIFI_INT]=0x0 wlan_confree_do> start ... [HWLAN] gSetting.Wireless_mode=9 Wireless Mode 9, Mixed 802.11n, 802.11g and 802.11b wlan_confree_do> start ... in wlan_confree_do_setmode, ------------------->change mode to 11NG ,OK wlan_confree_do> start ... ------------------->change nohtie to 0 ,OK ------------------->change pureb to 0 ,OK wlan_confree_do> start ... ath_getchannels> nchan=50 ath_getchannels> nchan=50 ath_getchannels> nchan=50 match:9 ------------------->change pureb to 0 ,OK wlan_confree_do> start ... ------------------->change pureg to 0 ,OK wlan_confree_do> start ... ------------------->change puren to 0 ,OK wlan_confree_do> start ... ------------------->set mcast rate to 22 ,OK wlan_confree_do> start ... ------------------->change cwmmode to 2 ,OK wlan_confree_do> start ... ------------------->change extoffset to -1 ,OK wlan_confree_do> start ... wlan_confree_do> start ... set amdulimit to 50000,OK! wlan_confree_do> start ... Set essid to WLAN-400386 , OK! wlan_confree_do> start ... Set mode to Master , OK! wlan_confree_do> start ... now in ieee80211_ioctl_siwfreq Set channel to 9 , OK! wlan_confree_do> start ... Set country ie to 1 , OK! wlan_confree_do> start ... Set country ie to 0 , OK! wlan_confree_do> start ... Set tx_chainmask to 3 , OK! wlan_confree_do> start ... Set rx_chainmask to 3 , OK! wlan_confree_do> start ... set hide ssid = 0, OK init_lx_acl> init_lx_acl> acl=NULL wlan_confree_do> start ... open wds function , OK apAppInit : ifno:2 dev->flags 00000000 [HWLAN]: dev->open = 800f095c, dev->name = wlan0 [HWLAN]: dev->open = 80076c64, dev->name = wifi0 ar5416CheckChan: channel 2412/0x90080; HT configuration meet regulatory ar5416CheckChan: phy mode 0, ext offset 0 ANI: capability: 9 ar5416CheckChan: channel 2452/0xf0080; HT configuration meet regulatory ar5416CheckChan: phy mode 1, ext offset -1 ANI: capability: 9 VOICE_DRV_Init Reset Duslic High begin Wait VOIP_Init() finished...done Uncompressed size = 303432 apAppInit : dev->flags 00001001 Reset Duslic end IFX TAPI, version 3.7.1.5, (c) 2001-2008 Infineon Technologies AG [39] Allocate mailbox 8 TAPI_init_task_queue: enter loop..8 update_img_hdr = A28F2C00 idx=0 mem_ptr=0xA28F2C00 size=65536 [35] Allocate resource 64, FreeResource = 2 IFX VMMC device driver, version 1.3.0.5, (c) 2006-2008 Infineon Technologies AG IFX MIPS24KEc MPS driver, version 2.0.0.0, (c) 2006-2008 Infineon Technologies AG ifx_mps_init_structures request_irq 1 146 ifx_mps_init_structures request_irq 2 147 ifx_mps_init_structures request_irq 3 0 142 ifx_mps_init_structures request_irq 3 1 143 ifx_mps_init_structures request_irq 3 2 144 ifx_mps_init_structures request_irq 3 3 145 VMMC_Open : Major 122 Minor 10 idx=1 mem_ptr=0xA2902C00 size=65536 IFX_TAPI_Create_Device: ndev = 0, TapiDev 816129A0 [35] Allocate resource 65, FreeResource = 3 idx=2 mem_ptr=0xA2912C00 size=65536 [35] Allocate resource 66, FreeResource = 4 [35] Allocate resource 67, FreeResource = 5 [35] Allocate resource 68, FreeResource = 6 [35] Allocate resource 69, FreeResource = 7 idx=3 mem_ptr=0xA2922C00 size=65536 >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 1 ifx_tapi_Prepare_Ch: nChannel 0 [35] Allocate resource 70, FreeResource = 8 [35] Allocate resource 71, FreeResource = 9 [35] Allocate resource 72, FreeResource = 10 [35] Allocate resource 73, FreeResource = 11 idx=4 mem_ptr=0xA2932C00 size=41288 >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 2 ifx_tapi_Prepare_Ch: nChannel 1 [35] Allocate resource 74, FreeResource = 12 [35] Allocate resource 75, FreeResource = 13 [35] Allocate resource 76, FreeResource = 14 [35] Allocate resource 77, FreeResource = 15 >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 3 ifx_tapi_Prepare_Ch: nChannel 2 [35] Allocate resource 78, FreeResource = 16 [35] Allocate resource 79, FreeResource = 17 [35] Allocate resource 80, FreeResource = 18 [35] Allocate resource 81, FreeResource = 19 >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 4 ifx_tapi_Prepare_Ch: nChannel 3 [35] Allocate resource 82, FreeResource = 20 [35] Allocate resource 83, FreeResource = 21 [35] Allocate resource 84, FreeResource = 22 [35] Allocate resource 85, FreeResource = 23 >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 5 ifx_tapi_Prepare_Ch: nChannel 4 [35] Allocate resource 86, FreeResource = 24 [35] Allocate resource 87, FreeResource = 25 [35] Allocate resource 88, FreeResource = 26 [35] Allocate resource 89, FreeResource = 27 ADSL Firmware: 2.1.5.12.0.2 ATUR >>>>>>>>>>>>>>>>>(FW: 1.10.000) [Annex B:0x4208 0x0] >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 6 ifx_tapi_Prepare_Ch: nChannel 5 [35] Allocate resource 90, FreeResource = 28 [35] Allocate resource 91, FreeResource = 29 [35] Allocate resource 92, FreeResource = 30 [35] Allocate resource 93, FreeResource = 31 >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 7 ifx_tapi_Prepare_Ch: nChannel 6 [35] Allocate resource 94, FreeResource = 32 [35] Allocate resource 95, FreeResource = 33 [35] Allocate resource 96, FreeResource = 34 [35] Allocate resource 97, FreeResource = 35 >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 8 ifx_tapi_Prepare_Ch: nChannel 7 [35] Allocate resource 98, FreeResource = 36 [35] Allocate resource 99, FreeResource = 37 [35] Allocate resource 100, FreeResource = 38 [35] Allocate resource 101, FreeResource = 39 >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 9 VMMC_LL_Open, nDev 0, inode 0 mpsCh 1 ifx_mps_open, inode 1 VMMC_Open --> 816129a0 VMMC_handle[0] : 816129a0 VMMC_Open : Major 122 Minor 11 VMMC_LL_Open, nDev 0, inode 1 mpsCh 2 ifx_mps_open, inode 2 VMMC_Open --> 81610630 VMMC_handle[1] : 81610630 VMMC_Open : Major 122 Minor 12 VMMC_LL_Open, nDev 0, inode 2 mpsCh 3 ifx_mps_open, inode 3 VMMC_Open --> 81610a9c VMMC_handle[2] : 81610a9c VMMC_Open : Major 122 Minor 13 VMMC_LL_Open, nDev 0, inode 3 mpsCh 4 ifx_mps_open, inode 4 VMMC_Open --> 81610f08 VMMC_handle[3] : 81610f08 VMMC_Open : Major 122 Minor 14 VMMC_LL_Open, nDev 0, inode 4 mpsCh 5 ifx_mps_open, inode 5 VMMC_Open --> 81611374 VMMC_handle[4] : 81611374 VMMC_Open : Major 122 Minor 15 VMMC_LL_Open, nDev 0, inode 5 mpsCh 6 ifx_mps_open, inode 6 VMMC_Open --> 816117e0 VMMC_handle[5] : 816117e0 VMMC_Open : Major 122 Minor 16 VMMC_LL_Open, nDev 0, inode 6 mpsCh 7 ifx_mps_open, inode 7 VMMC_Open --> 81611c4c VMMC_handle[6] : 81611c4c VMMC_Open : Major 122 Minor 17 VMMC_LL_Open, nDev 0, inode 7 mpsCh 8 VMMC_Open --> 816120b8 VMMC_handle[7] : 816120b8 VMMC_Open : Major 122 Minor 18 VMMC_LL_Open, nDev 0, inode 8 mpsCh 9 VMMC_Open --> 81612524 VMMC_handle[8] : 81612524 ===> Set PCM I/F 0 VMMC_handle:816129a0 ifx_mps_ioctl: FIO_MPS_DOWNLOAD...1 Unzipping from B020B000 to 825DB9BC ... [ZIP 1] [ZIP 1 a75cb796] done Uncompressed size = 642816 IFX_MPS: Download firmware (size 642816 bytes)... Init_SSLServer> input listen_protocol=6, nListenPort=443 [20] ssld_conf_init> ssl server info: [20] PrivateKey= [20] MyCertificate= [20] CaCertificate= [20] SSL_method=31 [20] verify_mode=0 [20] cipher_suites=ALL:@STRENGTH:!kEDH [20] tftp_server_ip=140.92.61.131 [20] fn_myCerttificate=ServCert.pem [20] fn_privateKey=PrivKey.pem [20] fn_caCertificate=CaCert.pem [20] ssld_conf_init> ssl server info end: PKCS12_PBE_add> PKCS12_PBE_add> support RC4 PKCS12_PBE_add> support DES PKCS12_PBE_add> support RC2 [20] pCtx=0x815f64fc in ssld_conf_init ssld_ctx_reset_cert> this is pkcs12 type certificate [20] ssld_ctx_reset_cert : re-LoadServerCertAndKey() ok!! [20] ssld_ctx_reset_cert> re-LoadCACertificate( 1stCA ) ok!![20] ssld_conf_init> ssld_conf_init() ok ok! Version 11.0.0.1.0 up and running... [dhcp_clt] enable dhcp client in interface THS[15] [21] SSLClient> SSLClient() run [21] sslc_conf_init> ssl client info: [21] PrivateKey= [21] MyCertificate= [21] CaCertificate= [21] SSL_method=31 [21] verify_mode=1 [21] cipher_suites=ALL:@STRENGTH:!kEDH [21] tftp_server_ip=140.92.61.131 [21] fn_myCerttificate=ServCert.pem [21] fn_privateKey=PrivKey.pem [21] fn_caCertificate=CaCert.pem [21] sslc_conf_init> ssl client info end: [21] sslc_conf_init> pCtx=0x815dba40 in ssld_conf_init [21] sslc_ctx_reset_cert> re-LoadCACertificate( 3rdCA ) ok!! [21] sslc_ctx_reset_cert> re-LoadCACertificate( 2ndCA ) ok!! [21] sslc_ctx_reset_cert> re-LoadCACertificate( 1stCA ) ok!!sslc_ctx_reset_cert> this is pkcs12 type certificate [21] sslc_ctx_reset_cert : re-LoadServerCertAndKey() ok!! [21] sslc_conf_init> sslc_conf_init() ok [21] SSLClient> want to bind socket for client application! TR64DBUG::TR64_Main> Start: TR64DBUG::TR64_Main> mapping "speedport.ip" to 192.168.2.1 TR64DBUG::TR64_Main> ServiceTable @ 0x8059EBAC, ServiceNum= 23 TR64DBUG::TR64_Main> szOSandVersion: TR64DBUG::TR64_Init> Start: SSDP Initialization completed... ********************************************* Wi-Fi Simple Config Application - Intel Corp. Version: Build 2.01.1.DTM1.1, Dec 10 2010 16:06:30 ********************************************* Initializing stack... WSC_WaitUserAction:wait user action:0 ScanMIH_task> DHCP ip give: 192.168.2.100 ~ 199, range: 100 ---------in wsc init---------- ----------sizeof(uint32)=4 ----------sizeof(uint-long)=4 ----------sizeof(uint32)=2 [PORTABLITY]:WscCreateThread-------------------- WscCmd:ActualCBThreadProc: Started >> Parse Service 'urn:dslforum-org:service:DeviceInfo:1' : TRUE >> Parse Service 'urn:dslforum-org:service:DeviceConfig:1' : TRUE >> Parse Service 'urn:dslforum-org:service:Layer3Forwarding:1' : TRUE >> Parse Service 'urn:dslforum-org:service:LANConfigSecurity:1' : TRUE >> Parse Service 'urn:dslforum-org:service:ManagementServer:1' : TRUE >> Parse Service 'urn:dslforum-org:service:Time:1' : TRUE >> Parse Service 'urn:dslforum-org:service:UserInterface:1' : TRUE >> Parse Service 'urn:dslforum-org:service:X_VoIP:1' : TRUE >> Parse Service 'urn:dslforum-org:service:LANHostConfigManagement:1' : TRUE >> Parse Service 'urn:dslforum-org:service:LANEthernetInterfaceConfig:1' : TRUE >> Parse Service 'urn:dslforum-org:service:WLANConfiguration:1' : TRUE >> Parse Service 'urn:dslforum-org:service:Hosts:1' : TRUE >> Parse Device 'urn:dslforum-org:device:LANDevice:1' : TRUE >> Parse Service 'urn:dslforum-org:service:WANCommonInterfaceConfig:1' : TRUE >> Parse Service 'urn:dslforum-org:service:WANDSLInterfaceConfig:1' : TRUE >> Parse Service 'urn:dslforum-org:service:WANEthernetInterfaceConfig:1' : TRUE >> Parse Service 'urn:dslforum-org:service:WANDSLConnectionManagement:1' : TRUE >> Parse Service 'urn:dslforum-org:service:WANDSLLinkConfig:1' : TRUE >> Parse Service 'urn:dslforum-org:service:WANEthernetLinkConfig:1' : TRUE >> Parse Service 'urn:dslforum-org:service:WANPPPConnection:1' : TRUE >> Parse Device 'urn:dslforum-org:device:WANConnectionDevice:1' : TRUE >> Parse Device 'urn:dslforum-org:device:WANDevice:1' : TRUE >> Parse Device 'urn:dslforum-org:device:InternetGatewayDevice:1' : TRUETR64DBUG::TR64_Init> tr64_pDevRoot->szDescUrl: "http://192.168.2.1/tr64_igd.xml" TR64DBUG::TR64_InitReqList> Start: TR64DBUG::TR64_InitReqList> End. TR64::TR64_Init> RUNTASK id=40 TR64_ProcessRequest... TR64DBUG::TR64_Init> End. TR64DBUG::TR64_Main> End. .[signal_1x_reset] ... ReleaseWDS_ni : cnt 0 ap_deauth_sta called ??? wlan_confree_do> start ... wlan_confree_do> start ... wlan_confree_do> start ... wlan_confree_do> start ... wlan_confree_do> start ... wlan_confree_do> start ... wlan_confree_do> start ... [HWLAN]: dev->open = 800f095c, dev->name = wlan0 [HWLAN]: dev->open = 80076c64, dev->name = wifi0 ar5416CheckChan: channel 2452/0xf0080; HT configuration meet regulatory ar5416CheckChan: phy mode 1, ext offset -1 ANI: capability: 9 ar5416CheckChan: channel 2452/0xf0080; HT configuration meet regulatory ar5416CheckChan: phy mode 1, ext offset -1 ANI: capability: 9 stopWlanG called ??? ReleaseWDS_ni : cnt 0 ReleaseWDS_ni : cnt 0 [signal_1x_reset] ... wlan_config : dev->flags 00000000, /cygdrive/e/projects/w503/source/firmware/linklayer/hwlan_ath_11n_v3/wlanfun.c 736 ADSL> READY set_VoIP__reg_led_timeout clear -1 t 1449 [PORTABLITY]:WscCreateThread-------------------- WscCmd:ActualUIThreadProc: Started. ActualUIThreadProc: wait q .MasterControl constructor WscCmd::MC instantiated ok [PORTABLITY]:WscCreateThread-------------------- [PORTABLITY]:pthread_mutex_init-------------------- CTransport Construction [PORTABLITY]:WscCreateThread-------------------- In CTransport::ActualCBThreadProc ActualCBThreadProc: Calling Dequeue .>>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 10 >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 11 ===> VMMC_Ioctl: Phone 1 IFX_TAPI_LINE_TYPE ok! VMMC_Ioctl: Phone 1 IFXPHONE_SET_LINEFEED ok! VMMC_Ioctl: Phone 1 IFX_TAPI_MAP_DATA_ADD ok! Set PCM I/F 1 VMMC_handle:81610630 ===> VMMC_Ioctl: Phone 2 IFX_TAPI_LINE_TYPE ok! VMMC_Ioctl: Phone 2 IFXPHONE_SET_LINEFEED ok! VMMC_Ioctl: Phone 2 IFX_TAPI_MAP_DATA_ADD ok! Set PCM I/F 2 VMMC_handle:81610a9c ===> Set PCM I/F 3 VMMC_handle:81610f08 ===> Set PCM I/F 4 VMMC_handle:81611374 ===> Set PCM I/F 5 VMMC_handle:816117e0 ===> Set PCM I/F 6 VMMC_handle:81611c4c ===> Set PCM I/F 7 VMMC_handle:816120b8 ===> Set PCM I/F 8 VMMC_handle:81612524 CheckWidebandCodec: 255 3 CheckWidebandCodec: 255 3 CheckWidebandCodec: 255 3 CheckWidebandCodec: 255 3 Setting HOOK Related Parameters 0 Setting HOOKFLASH_TIME min 70 ms max 320 ms Setting HOOKON_TIME min 320 max 320 Setting HOOK Related Parameters 1 Setting HOOKFLASH_TIME min 70 ms max 320 ms Setting HOOKON_TIME min 320 max 320 Setting HOOK Related Parameters 2 Setting HOOK Related Parameters 3 RUNTASK id=44 VINETIC_DRV_Task... [45] Allocate mailbox 9 RUNTASK id=45 VINETIC_T38_Task... RUNTASK id=47 FXO_flash_task... RUNTASK id=46 VOICE_API_task... ************** Enable ProDaaCheckInterrupt() detect 3749 .Reset Duslic High begin Reset Duslic end ProDAAInitialize: begin now ProDAAInitialize: Line-Side Device Status 0 Port 2 sytem-side revision 44, line-side revision 6 init_DTMF_data: time 4574 force_daa_offhook ch 2 onoff 1 time 4574 ProDaaOffhook 0 2 onoff 1 CID_Detect CH 2 onoff 0 FXO_PolState_DTMFCID --> Disable DTMF CID MC::Init: Init complete ok WscCmd::MC intialized ok WscCmd::Init ok, starting stack... Info::ReadConfigFile:File open ok ******************uuid_p:00000000-0000-0003000000264d400328***** mp_deviceInfo->uuid[i]: 0-0-0-0-0-0-0-3-0-0-0-26-4d-40-3-28- mp_deviceInfo->macAddr:00:26:4D:40:03:28 gSetting.dot1x.if_entry[0].enableWEP:0 authTypeFlags is 20 ,encrTypeFlags is 8 ,m_nwKey is 8865150560484848, key len is 10 ssid is WLAN-400386 force_daa_offhook ch 2 onoff 0 time 4633 ProDaaOffhook 1 2 onoff 0 CID_Detect CH 2 onoff 1 FXO_PolState_DTMFCID --> Detect Polarity Changed Enable DTMF CID

Tags

Back to top

toh/t-com/spw503vtypc.txt · Last modified: 2014/05/24 12:06 by jannispinter