User Tools

Site Tools


toh:t-com:spw504v

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Previous revision
toh:t-com:spw504v [2012/09/18 18:50]
toh:t-com:spw504v [2014/08/30 13:28] (current)
jannispinter updated OpenWrt bootlog
Line 1: Line 1:
-======= T-Home Speedport W 504V  =======+====== T-Home Speedport W 504V ====== 
 +The T-Home Speedport W 504V (ARV8539PW22) is an IAD sold by Deutsche Telekom with an ADSL2+ Annex B/J Modem, 802.11abgn Wifi and two FXS ports as well as a S0 bus connector. \\ 
 +The device is manufactured by Arcadyan.
  
-===== Hardware ​===== +===== Supported Versions ​===== 
-WLAN Atheros ar9220-ac1a | +Version/​Model ^ Launch Date ^ S/N ^ OpenWrt Version Supported ^ Model Specific Notes ^ 
-^ Power external 12V 1.25A | +Typ A  |  ​  **not supported yet**  ​| - |
-{{http://​onny.project-insanity.org/​files/​speedport_w504v_main_top.jpg|}} +
-{{http://​onny.project-insanity.org/​files/​speedport_w504v_main_bot.jpg|}} +
-====== Bootloader dump ====== +
-http://​pastebin.com/​E189UqJg+
  
-====== Flash layout ​======+OEM source code is not available. 
 + 
 +===== Hardware Highlights ​===== 
 +^ SoC ^ Ram ^ Flash ^ Network ^ USB ^ Serial ^ JTag ^ 
 +| Lantiq Xway Danube @333Mhz Dual Core | 64 MiB | 8 MiB | 4 x 1| Yes | Yes | ? | 
 +\\ 
 +User manual (in German): [[https://​www.telekom.de/​dlp/​eki/​downloads/​Speedport/​Speedport%20W%20504V%20Typ%20A/​Bedienungsanleitung_Speedport_W504V.pdf|Bedienungsanleitung]] \\ 
 +Forum: [[https://​forum.openwrt.org/​viewtopic.php?​id=40043]] \\ 
 + 
 +===== State of the OpenWrt port ===== 
 +^ ^            Status ​                                                ^ Comment ​         ^ 
 +| WLAN       | <​HTML><​font size="​6";​ color="​green">​✔</​font></​HTML> ​ | | 
 +| DSL        | <​HTML><​font size="​6";​ color="​green">​✔</​font></​HTML> ​  | DSL modem is detected, firmware loaded. Not tested yet, but it should work for Annex B | 
 +| Switch ​    | <​HTML><​font size="​6";​ color="​green">​✔</​font></​HTML> ​  | | 
 +| Bootloader | <​HTML><​font size="​6";​ color="​orange">​WIP</​font></​HTML>​| I have no clue how the encryption of the firmware image works, see [[toh:​t-com:​spw504v#​Bootloader|Bootloader]],​ please help! :-) | 
 +| LED        | <​HTML><​font size="​6";​ color="​green">​✔</​font></​HTML> ​  | | 
 +| USB        | <​HTML><​font size="​6";​ color="​green">​✔</​font></​HTML>​| ​ | 
 +| Telephony ​ | <​HTML><​font size="​6";​ color="​red">​✘</​font></​HTML>​ | Not tested yet | 
 +| DECT       | <​HTML><​font size="​6";​ color="​red">​✘</​font></​HTML>​ | Not tested yet | 
 +I've derived basic support for this device. You can flash a squashfs image via serial console and boot it with u-boot (in memory). However, I'm unable to create an image that can be booted by the brn-boot bootloader. I found some information on the web, that might help someone (with some C skills) to encrypt the squashfs image in order to boot OpenWrt with brn-boot. See [[toh:​t-com:​spw504v#​Bootloader|Bootloader]]. \\ 
 +You could also flash u-boot into the boot partition, but this might brick your device and you lose the ability to go back to the stock firmware! 
 + 
 + 
 +===== Installation ===== 
 +This device is **not supported** yet. 
 + 
 +==== Flash Layout ==== 
 + 
 +This is the default flash layout as reported by the bootloader:
 <​code>​ <​code>​
 --------------------------------------- ---------------------------------------
Line 22: Line 48:
 --------------------------------------- ---------------------------------------
 </​code>​ </​code>​
 +|{{:​meta:​icons:​tango:​48px-dialog-warning.svg.png?​nolink}}| Please note that area/​partition "[5] Flash Image" is the complete flash, so do **never** try to erase or reflash this area. Also don't mess with areas 0, 1 and 4 as you might brick your device.|
  
-====== Flash custom firmware ​====== +====Proposed flash layout for OpenWrt==== 
-Start your serial terminal ​and press the space bar 3 times to access the bootloader ​shell. The access password are the first digits of your "​Gerätepasswort"​ (device password). Press return to see help menu. Press "​k"​ to run the minikernel, which will run a webserver on 192.168.2.1:​80 with recovery options.+^ Speedport W 504V Typ A Flash Layout (Proposal) ^^^^^^^^^^ 
 +^ Layer0 | **//[5] Flash Image//** ||||||||| 
 +^ Size | 8192KiB (64KiB block size) ||||||||| 
 +^ Address | 0xB0000000 ||||||||| 
 +^ Layer1 (brn-boot) <​HTML><​td style="​background:#​ffc0c0;​font-style:​italic;​font-weight:​bold;">​[0] Boot</​td></​HTML>​ | **//[1] Configuration//​** | **//[2] Image 0//** <​HTML><​td style="​font-style:​italic;​font-weight:​bold;"​ colspan="​2">​[3] Image 1</​td><​td style="​background:#​ffc0c0;​font-style:​italic;​font-weight:​bold;">​[4] Boot Params</​td></​HTML>​ | 
 +^ Size <​HTML><​td style="​background:#​ffc0c0;">​192KiB</​td></​HTML>​ | 256KiB | 3840KiB <​HTML><​td colspan="​2">​3840KiB</​td><​td style="​background:#​ffc0c0;">​64KiB</​td></​HTML>​ | 
 +^ Address <​HTML><​td style="​background:#​ffc0c0;">​0xB0000000</​td></​HTML>​ | 0xB0030000 | 0xB0070000 <​HTML><​td colspan="​2">​0xB0430000</​td><​td style="​background:#​ffc0c0;">​0xB07F0000</​td></​HTML>​ | 
 +^ Layer2 (OpenWrt) <​HTML><​td style="​background:#​ffc0c0;​font-style:​italic;​font-weight:​bold;">​brn-boot</​td><​td style="​background:#​c0ffc0;​font-style:​italic;​font-weight:​bold;"​ colspan="​2">​rootfs-data</​td><​td style="​background:#​c0c0ff;​font-style:​italic;​font-weight:​bold;">​kernel</​td><​td style="​background:#​ffffc0;​font-style:​italic;​font-weight:​bold;">​rootfs</​td><​td style="​background:#​ffc0c0;​font-style:​italic;​font-weight:​bold;">​art</​td></​HTML>​ | 
 +^ Size <​HTML><​td style="​background:#​ffc0c0;">​128KiB</​td><​td style="​background:#​c0ffc0;"​ colspan="​2">​4096KiB</​td><​td style="​background:#​c0c0ff;">​1280KiB</​td><​td style="​background:#​ffffc0;">​2560KiB</​td><​td style="​background:#​ffc0c0;">​64KiB</​td></​HTML>​ | 
 +^ Address <​HTML><​td style="​background:#​ffc0c0;">​0xB0000000</​td><​td style="​background:#​c0ffc0;"​ colspan="​2">​0xB0030000</​td><​td style="​background:#​c0c0ff;">​0xB0430000</​td><​td style="​background:#​ffffc0;">​0xB0570000</​td><​td style="​background:#​ffc0c0;">​0xB07F0000</​td></​HTML>​ | 
 +^ Device <​HTML><​td style="​background:#​ffc0c0;">​mtd0</​td><​td style="​background:#​c0ffc0;"​ colspan="​2">​mtd1</​td><​td style="​background:#​c0c0ff;">​mtd2</​td><​td style="​background:#​ffffc0;">​mtd3</​td><​td style="​background:#​ffc0c0;">​mtd4</​td></​HTML>​ | 
 +^ mountpoint <​HTML><​td style="​background:#​ffc0c0;​font-style:​italic;">​none</​td><​td style="​background:#​c0ffc0;"​ colspan="​2">/​overlay,​ /</​td><​td style="​background:#​c0c0ff;​font-style:​italic;">​none</​td><​td style="​background:#​ffffc0;">/​rom,​ /</​td><​td style="​background:#​ffc0c0;​font-style:​italic;">​none</​td></​HTML>​ | 
 +^ filesystem <​HTML><​td style="​background:#​ffc0c0;​font-style:​italic;">​none</​td><​td style="​background:#​c0ffc0;"​ colspan="​2"><​a href="​doc/​techref/​filesystems#​jffs2">​JFFS2</​a></​td><​td style="​background:#​c0c0ff;​font-style:​italic;">​none</​td><​td style="​background:#​ffffc0;"><​a href="​doc/​techref/​filesystems#​squashfs">​SquashFS</​a></​td><​td style="​background:#​ffc0c0;​font-style:​italic;">​none</​td></​HTML>​ | 
 + 
 +==== Flash custom firmware ==== 
 +-> [[doc:​techref:​bootloader:​brnboot|brnboot]] \\ 
 +Start your [[#serial|serial terminal]], press the space bar 3 times (as soon as the device is powered on) to access the bootloader. The access password are **the first digits** of your "​Gerätepasswort"​ (device password). Press return to see help menu. Press "​!"​ to access the hidden administrator mode with extended  
 +options. Press "​k"​ to run the minikernel, which will run a webserver on 192.168.2.1:​80 with recovery options. ​\\ 
 + 
 +==== Bootloader ==== 
 +The device uses [[http://​wiki.openwrt.org/​doc/​techref/​bootloader/​brnboot|brnboot]] as bootloader. With more recent versions of brnboot, Arcadyan got more imaginative with their obfuscation/​encryption algorhytms.  
 + 
 +In a flash dump of the bootloader I found two encryption keys: \\ 
 +0x1FBDC - 0x1FBDF: **E3AEF33F** \\ 
 +0x1FC00 - 0x1FC09: The null termianted ASCII String "​**BRNDTW504**"​ \\ 
 + 
 +I tried the method described in the wiki article for [[http://​wiki.openwrt.org/​toh/​arcadyan/​arv7506#​create.firmware.image.for.brnboot|ARV7506]]. I was now able to flash the image via the bootloader'​s recovery webinterface (signature BRNDTW504 seems to be correct). 
 +However, the bootloader didn't boot the encrypted image. :-( 
 + 
 +In the german ip-phone-forum I found some information about the encryption methods used in the Speedport W722V. I think this might be the correct method for this device, too. In [[http://​www.ip-phone-forum.de/​showthread.php?​t=211537|this thread]], it is described how to decrypt the firmware and a C program (for Windows :-( ) is provided. 
 + 
 + 
 +==== Buttons ==== 
 +-> [[doc:​howto:​hardware.button]] on howto use and configure the hardware button(s). 
 + 
 +===== Hardware ===== 
 +==== Info ==== 
 +| **[[wp>​Instruction set]]:​** ​              | [[wp>​MIPS architecture|MIPS]] | 
 +| **Vendor:​** ​                              | [[wp>​Lantiq]] | 
 +| **[[doc:​techref:​Bootloader]]:​** ​          | [[doc:​techref:​bootloader:​brnboot|brnboot]] | 
 +| **[[doc:​hardware:​soc|System-On-Chip]]:​** ​ | Lantiq Danube | 
 +| **[[doc:​hardware:​cpu|CPU]] @Frq** ​        | MIPS 24KEc @333MHz | 
 +| **Flash size:​** ​                | 8 MiB | 
 +| **Flash Chip:​** ​                | [[http://​www.zlgmcu.com/​mxic/​pdf/​NOR_Flash_b/​MX29LV640ETB_DS_EN.pdf|MXIC MX29LV640EB]] | 
 +| **RAM size:​** ​                  | 64 MiB   | 
 +| **RAM Chip:​** ​                  | [[http://​wiki.laptop.org/​images/​2/​2b/​PowerChip512MBDDR.pdf| Zentel A3S12D40ETP-G6]] ​ | 
 +| **ISDN** ​              ​  ​ | [[http://#​|?​]] | 
 +| **DECT** ​              ​  ​ | [[http://​www.datasheetarchive.com/​dlmain/​SFDatasheet-11/​sf-000233219.pdf|PMB9643 V2.0]] | 
 +| **Wireless** ​              ​  ​ | [[http://​www.wehavemorefun.de/​fritzbox/​AR9220|AR9220-AC1A]] | 
 +| **[[doc:​hardware:​Switch]]:​** ​   | [[http://​www.wehavemorefun.de/​fritzbox/​AR8216|AR8216-BH1A]] | 
 +| **[[doc/​hardware/​internet.access.technologies|Modem]]:​** ​  | ADSL2+| 
 +| **USB:​** ​                       | Yes  | 
 +| **[[doc:​hardware:​port.serial|Serial]]:​** ​ | [[#​Serial|Yes]] | 
 +| **[[doc:​hardware:​port.jtag|JTAG]]:​** ​     | [[#​JTAG|?​]] ​  | 
 + 
 +==== Photos ==== 
 +Typ A 
 + 
 +//​Front://​ 
 + 
 +**Photo of front of the casing, coming soon** 
 + 
 +//Back:// 
 + 
 +**Photo of back of the casing, coming soon** 
 + 
 +==== Opening the case ==== 
 +**Note:** This will void your warranty! \\ 
 + 
 +//Main PCB:// 
 +|{{https://​io.pinterjann.is/​public/​openwrt/​spw504v/​pictures/​speedport_w504v_board_top.jpg?​400|}} {{https://​io.pinterjann.is/​public/​openwrt/​spw504v/​pictures/​speedport_w504v_board_bottom.jpg?​400|}} | 
 +//Bottom PCB without shiedling://​ 
 +|{{https://​io.pinterjann.is/​public/​openwrt/​spw504v/​pictures/​speedport_w504v_board_bottom_without_shielding.jpg?​400|}}| 
 + 
 +==== Serial ==== 
 +-> [[doc:​hardware:​port.serial]] general information about the serial port, serial port cable, etc. 
 + 
 +J8 is located next to the ethernet switch. 
 +Pin 1 is marked by an arrow. 
 + 
 +|4| GND | 
 +|3| RX | 
 +|2| TX | 
 +|1| Vcc 3.3V | 
 + 
 +{{https://​io.pinterjann.is/​public/​openwrt/​spw504v/​pictures/​speedport_w504v_serial_pinout.jpg?​400}} 
 + 
 +115200 baud, 8N1 
 + 
 +===== Debricking ===== 
 +-> [[doc:​howto:​generic.debrick]] \\ 
 + 
 +===== Enable UART ===== 
 +I'm unable to find R80 but located R65 near the CPU! 
 + 
 +===== Patch ===== 
 +This patch can be seen as a draft to add support for this device. It is not finished yet. 
 +<​HTML>​ 
 +<code diff> 
 +<p style="​padding:​ 10px;​border:​1px solid grey;​height:​600px;​font:​10px/​14px Georgia, Garamond, Serif;​overflow:​Auto;​background-color:#​FFFFFF">​ 
 +diff --git a/​target/​linux/​lantiq/​base-files/​etc/​uci-defaults/​01_leds b/​target/​linux/​lantiq/​base-files/​etc/​uci-defaults/​01_leds 
 +index 70a14d9..7c122db 100644 
 +--- a/​target/​linux/​lantiq/​base-files/​etc/​uci-defaults/​01_leds 
 ++++ b/​target/​linux/​lantiq/​base-files/​etc/​uci-defaults/​01_leds 
 +@@ -30,6 +30,13 @@ BTHOMEHUBV2B) 
 + ​ ucidef_set_led_netdev "​internet"​ "​internet"​ "​soc:​blue:​broadband"​ "​nas0"​ 
 + ​ ucidef_set_led_usbdev "​usb"​ "​usb"​ "​soc:​blue:​phone"​ "​1-1"​ 
 +  ;; 
 ++ARV8539PW22) 
 ++ ucidef_set_led_default "​power"​ "​power"​ "​soc:​green:​power"​ "​1"​ 
 ++#​ ucidef_set_led_default "​power"​ "​power"​ "​soc:​red:​power"​ "​0"​ 
 ++ ucidef_set_led_wlan "​wifi"​ "​wifi"​ "​soc:​green:​wireless"​ "​phy0tpt"​ 
 ++ ucidef_set_led_netdev "​dsl"​ "​dsl"​ "​soc:​green:​dsl"​ "​nas0"​ 
 ++ ucidef_set_led_netdev "​online"​ "​online"​ "​soc:​green:​online"​ "​pppoe-wan"​ 
 ++ ;; 
 + *) 
 +  ;; 
 + ​esac 
 +diff --git a/​target/​linux/​lantiq/​base-files/​etc/​uci-defaults/​02_network b/​target/​linux/​lantiq/​base-files/​etc/​uci-defaults/​02_network 
 +index 02f4f6a..9995af8 100644 
 +--- a/​target/​linux/​lantiq/​base-files/​etc/​uci-defaults/​02_network 
 ++++ b/​target/​linux/​lantiq/​base-files/​etc/​uci-defaults/​02_network 
 +@@ -93,7 +93,7 @@ ACMP252|GIGASX76X) 
 +  ;; 
 +  
 + # ar8316 
 +-ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22) 
 ++ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22|ARV8539PW22) 
 + ​ ucidef_set_interface_lan "​eth0.1"​ 
 + ​ ucidef_add_switch "​switch0"​ "​1"​ "​1"​ 
 + ​ ucidef_add_switch_vlan "​switch0"​ "​1"​ "0t 2 3 4 5" 
 +diff --git a/​target/​linux/​lantiq/​image/​Makefile b/​target/​linux/​lantiq/​image/​Makefile 
 +index f8d46fb..f44a0f1 100644 
 +--- a/​target/​linux/​lantiq/​image/​Makefile 
 ++++ b/​target/​linux/​lantiq/​image/​Makefile 
 +@@ -310,6 +310,9 @@ Image/​Build/​Profile/​ARV752DPW=$(call Image/​Build/​$(1),​$(1),​ARV752DPW) 
 + ​Image/​BuildKernel/​Profile/​ARV752DPW22=$(call Image/​BuildKernel/​Template,​ARV752DPW22) 
 + ​Image/​Build/​Profile/​ARV752DPW22=$(call Image/​Build/​$(1),​$(1),​ARV752DPW22) 
 +  
 ++Image/​BuildKernel/​Profile/​ARV8539PW22=$(call Image/​BuildKernel/​Template,​ARV8539PW22) 
 ++Image/​Build/​Profile/​ARV8539PW22=$(call Image/​Build/​$(1),​$(1),​ARV8539PW22,​BRNDTW504,​0xE3AEF33F,​memsize=64) 
 +
 + ​Image/​BuildKernel/​Profile/​GIGASX76X=$(call Image/​BuildKernel/​Template,​GIGASX76X) 
 + ​Image/​Build/​Profile/​GIGASX76X=$(call Image/​Build/​$(1),​$(1),​GIGASX76X) 
 +  
 +diff --git a/​target/​linux/​lantiq/​xway/​profiles/​arv.mk b/​target/​linux/​lantiq/​xway/​profiles/​arv.mk 
 +index 30cc778..b1c720b 100644 
 +--- a/​target/​linux/​lantiq/​xway/​profiles/​arv.mk 
 ++++ b/​target/​linux/​lantiq/​xway/​profiles/​arv.mk 
 +@@ -18,6 +18,18 @@ endef 
 +  
 + ​$(eval $(call Profile,​ARV7525PW)) 
 +  
 ++define Profile/​ARV8539PW22 
 ++  NAME:​=Speedport W504V Typ A - ARV8539PW22 
 ++  PACKAGES:​=kmod-ltq-hcd-danube \ 
 ++ kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \ 
 ++ kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \ 
 ++ ltq-adsl-app ppp-mod-pppoa \ 
 ++ kmod-ath9k wpad-mini \ 
 ++ swconfig 
 ++endef 
 +
 ++$(eval $(call Profile,​ARV8539PW22)) 
 +
 + ​define Profile/​ARV4518PWR01 
 +   ​NAME:​=ARV4518PWR01 
 +   ​PACKAGES:​=kmod-ltq-hcd-danube kmod-ledtrig-usbdev \ 
 +diff --git a/​target/​linux/​lantiq/​dts/​ARV8539PW22.dts b/​target/​linux/​lantiq/​dts/​ARV8539PW22.dts 
 +new file mode 100644 
 +index 0000000..4206937 
 +--- /dev/null 
 ++++ b/​target/​linux/​lantiq/​dts/​ARV8539PW22.dts 
 +@@ -0,0 +1,160 @@ 
 ++/​dts-v1/;​ 
 +
 ++/include/ "​danube.dtsi"​ 
 +
 ++/ { 
 ++ model = "​ARV8539PW22 - Speedport W 504V Typ A"; 
 +
 ++ memory@0 { 
 ++ reg = <0x0 0x4000000>;​ 
 ++ }; 
 +
 ++ sram@1F000000 { 
 ++ vmmc@107000 { 
 ++ status = "​okay";​ 
 ++ gpios = <&​gpio 31 0>; 
 ++ }; 
 ++ }; 
 +
 ++ fpi@10000000 { 
 ++ localbus@0 { 
 ++ nor-boot@0 { 
 ++ compatible = "​lantiq,​nor";​ 
 ++ bank-width = <​2>;​ 
 ++ reg = <0 0x0 0x800000>;​ 
 ++ #​address-cells = <​1>;​ 
 ++ #​size-cells = <​1>;​ 
 ++  
 ++ partition@0 { 
 ++ label = "​brnboot";​ 
 ++ reg = <0x00000 0x30000>;​ /​* 192 KiB */ 
 ++ read-only;​ 
 ++ }; 
 +
 ++ partition@30000 { 
 ++ label = "​rootfs_data";​ 
 ++ reg = <0x30000 0x400000>;​ /​* 4 MiB */ 
 ++ }; 
 +
 ++ partition@430000 { 
 ++ label = "​firmware";​ 
 ++ reg = <​0x430000 0x3C0000>;​ /​* 3840 KiB */ 
 ++ }; 
 +
 ++ partition@7F0000 { 
 ++ label = "​art";​ 
 ++ reg = <​0x7F0000 0x10000>;​ /​* 64 KiB*/ 
 ++ read-only;​ 
 ++ }; 
 ++ }; 
 +
 ++ mac_addr { 
 ++ compatible = "​lantiq,​eth-mac";​ 
 ++ reg = <0 0x7f0016 0x6>; 
 ++ mac-increment = <​2>;​ 
 ++ }; 
 +
 ++ ath9k_eep { 
 ++ compatible = "​ath9k,​eeprom";​ 
 ++ reg = <0 0x7f0400 0x1000 
 ++ 0 0x7f0016 0x6>; 
 ++ ath,​mac-increment = <​1>;​ 
 ++ ath,​pci-slot = <​14>;​ 
 ++ ath,​eep-endian;​ 
 ++ ath,​arv-ath9k-fix;​ 
 ++ }; 
 ++ }; 
 +
 ++ gpio: pinmux@E100B10 { 
 ++ pinctrl-names = "​default";​ 
 ++ pinctrl-0 = <&​state_default>;​ 
 +
 ++ state_default:​ pinmux { 
 +
 ++ pci_in { 
 ++ lantiq,​groups = "​req1";​ 
 ++ lantiq,​function = "​pci";​ 
 ++ lantiq,​open-drain = <​1>;​ 
 ++ lantiq,​pull = <​2>;​ 
 ++ lantiq,​output = <​0>;​ 
 ++ }; 
 ++ pci_out { 
 ++ lantiq,​groups = "​gnt1";​ 
 ++ lantiq,​function = "​pci";​ 
 ++ lantiq,​output = <​1>;​ 
 ++ }; 
 ++ pci_rst { 
 ++ lantiq,​pins = "​io21";​ 
 ++ lantiq,​pull = <​2>;​ 
 ++ lantiq,​output = <​1>;​ 
 ++ }; 
 ++ relay { 
 ++ lantiq,​pins = "​io31";​ 
 ++ lantiq,​output = <​1>;​ 
 ++ }; 
 ++ }; 
 ++ }; 
 +
 ++ etop@E180000 { 
 ++ phy-mode = "​mii";​ 
 ++ }; 
 +
 ++ pci@E105400 { 
 ++ status = "​okay";​ 
 ++ gpio-reset = <&​gpio 21 0>; 
 ++ }; 
 +
 ++ ifxhcd@E101000 { 
 ++ status = "​okay";​ 
 ++ gpios = <&​gpio 14 0>; 
 ++ lantiq,​portmask = <​0x3>;​ 
 ++ }; 
 +
 ++ }; 
 +
 ++ gpio-keys-polled { 
 ++ compatible = "​gpio-keys-polled";​ 
 ++ #​address-cells = <​1>;​ 
 ++ #​size-cells = <​0>;​ 
 ++ poll-interval = <​100>;​ 
 +
 ++ wireless { 
 ++ label = "​wireless";​ 
 ++ gpios = <&​gpio 29 1>; 
 ++ linux,​code = <​0x211>;​ 
 ++ }; 
 ++ reset { 
 ++ label = "​reset";​ 
 ++ gpios = <&​gpio 30 1>; 
 ++ linux,​code = <​0x198>;​ 
 ++ }; 
 ++ }; 
 +
 ++ gpio-leds { 
 ++ compatible = "​gpio-leds";​ 
 +
 ++ power-green { 
 ++ label = "​power";​ 
 ++ gpios = <&​gpio 24 1>; 
 ++ }; 
 ++ power-red { 
 ++ label = "​soc:​red:​power";​ 
 ++ gpios = <&​gpio 4 1>; 
 ++ }; 
 +
 ++ dsl-green { 
 ++ label = "​soc:​green:​dsl";​ 
 ++ gpios = <&​gpio 5 1>; 
 ++ }; 
 +
 ++ online-green { 
 ++ label = "​soc:​green:​online";​ 
 ++ gpios = <&​gpio 6 1>; 
 ++ }; 
 +
 ++ wireless-green { 
 ++ label = "​soc:​green:​wireless";​ 
 ++ gpios = <&​gpio 8 1>; 
 ++ }; 
 +
 ++ phone-green { 
 ++ label = "​soc:​green:​phone";​ 
 ++ gpios = <&​gpio 9 1>; 
 ++ }; 
 +
 ++ }; 
 ++}; 
 +</​code>​ 
 +</​p>​ 
 +</​HTML>​ 
 + 
 + 
 + 
 +===== Bootlogs ===== 
 +==== OpenWrt bootlog ==== 
 +<​HTML>​ 
 +<p style="​padding:​ 10px;​border:​1px solid grey;​height:​600px;​font:​10px/​14px Georgia, Garamond, Serif;​overflow:​Auto;​background-color:#​FFFFFF">​ 
 +<​code>​ 
 +[    0.000000] Linux version 3.10.49 (openwrt@5d70dc216165) (gcc version 4.8.3 (OpenWrt/​Linaro GCC 4.8-2014.04 r42162) ) #3 Sat Aug 30 11:06:55 UTC 2014 
 +[    0.000000] SoC: Danube rev 1.5 
 +[    0.000000] bootconsole [early0] enabled 
 +[    0.000000] CPU revision is: 00019641 (MIPS 24KEc) 
 +[    0.000000] MIPS: machine is ARV8539PW22 - Speedport W 504V Typ A 
 +[    0.000000] Determined physical RAM map: 
 +[    0.000000] ​ memory: 04000000 @ 00000000 (usable) 
 +[    0.000000] Initrd not found or empty - disabling initrd 
 +[    0.000000] Zone ranges: 
 +[    0.000000] ​  ​Normal ​  [mem 0x00000000-0x03ffffff] 
 +[    0.000000] Movable zone start for each node 
 +[    0.000000] Early memory node ranges 
 +[    0.000000] ​  ​node ​  0: [mem 0x00000000-0x03ffffff] 
 +[    0.000000] On node 0 totalpages: 16384 
 +[    0.000000] free_area_init_node:​ node 0, pgdat 803969d0, node_mem_map 810029c0 
 +[    0.000000] ​  ​Normal zone: 128 pages used for memmap 
 +[    0.000000] ​  ​Normal zone: 0 pages reserved 
 +[    0.000000] ​  ​Normal zone: 16384 pages, LIFO batch:3 
 +[    0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes. 
 +[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes 
 +[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 
 +[    0.000000] pcpu-alloc: [0] 0  
 +[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256 
 +[    0.000000] Kernel command line: console=ttyLTQ0,​115200 init=/​etc/​preinit 
 +[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) 
 +[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) 
 +[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) 
 +[    0.000000] Writing ErrCtl register=00074d28 
 +[    0.000000] Readback ErrCtl register=00074d28 
 +[    0.000000] Memory: 60752k/​65536k available (3017k kernel code, 4784k reserved, 761k data, 180k init, 0k highmem) 
 +[    0.000000] NR_IRQS:​256 
 +[    0.000000] CPU Clock: 333MHz 
 +[    0.036000] Calibrating delay loop... 221.18 BogoMIPS (lpj=442368) 
 +[    0.036000] pid_max: default: 32768 minimum: 301 
 +[    0.040000] Mount-cache hash table entries: 512 
 +[    0.048000] pinctrl core: initialized pinctrl subsystem 
 +[    0.052000] NET: Registered protocol family 16 
 +[    0.072000] pinctrl-xway 1e100b10.pinmux:​ Init done 
 +[    0.076000] dma-xway 1e104100.dma:​ Init done - hw rev: 3, ports: 5, channels: 20 
 +[    0.088000] PCI host bridge /​fpi@10000000/​pci@E105400 ranges: 
 +[    0.092000] ​ MEM 0x0000000018000000..0x0000000019ffffff 
 +[    0.096000] ​  IO 0x000000001ae00000..0x000000001affffff 
 +[    0.100000] ath9k,​eeprom 107f0400.ath9k_eep:​ endian check enabled. 
 +[    0.104000] ath9k,​eeprom 107f0400.ath9k_eep:​ pci slot: 14 
 +[    0.108000] ath9k,​eeprom 107f0400.ath9k_eep:​ loaded ath9k eeprom 
 +[    0.132000] bio: create slab <​bio-0>​ at 0 
 +[    0.140000] usbcore: registered new interface driver usbfs 
 +[    0.144000] usbcore: registered new interface driver hub 
 +[    0.148000] usbcore: registered new device driver usb 
 +[    0.152000] PCI host bridge to bus 0000:00 
 +[    0.156000] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff] 
 +[    0.160000] pci_bus 0000:00: root bus resource [io  0x1ae00000-0x1affffff] 
 +[    0.164000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] 
 +[    0.168000] pci 0000:​00:​0e.0:​ [168c:ff1d] type 00 class 0x020000 
 +[    0.168000] pci 0000:​00:​0e.0:​ fixup device configuration 
 +[    0.172000] pci 0000:​00:​0e.0:​ fixup info: [168c:0029] revision 01 class 0x028000 
 +[    0.176000] pci 0000:​00:​0e.0:​ reg 10: [mem 0x00000000-0x0000ffff] 
 +[    0.176000] pci 0000:​00:​0e.0:​ PME# supported from D0 D3hot 
 +[    0.176000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 
 +[    0.176000] pci 0000:​00:​0e.0:​ BAR 0: assigned [mem 0x18000000-0x1800ffff] 
 +[    0.180000] pci 0000:​00:​0e.0:​ SLOT:14 PIN:1 IRQ:30 
 +[    0.184000] Switching to clocksource MIPS 
 +[    0.192000] NET: Registered protocol family 2 
 +[    0.200000] TCP established hash table entries: 512 (order: 0, 4096 bytes) 
 +[    0.208000] TCP bind hash table entries: 512 (order: -1, 2048 bytes) 
 +[    0.212000] TCP: Hash tables configured (established 512 bind 512) 
 +[    0.220000] TCP: reno registered 
 +[    0.224000] UDP hash table entries: 256 (order: 0, 4096 bytes) 
 +[    0.228000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) 
 +[    0.236000] NET: Registered protocol family 1 
 +[    0.240000] PCI: CLS 0 bytes, default 32 
 +[    0.240000] gptu: totally 6 16-bit timers/​counters 
 +[    0.244000] gptu: misc_register on minor 63 
 +[    0.248000] gptu: succeeded to request irq 126 
 +[    0.256000] gptu: succeeded to request irq 127 
 +[    0.260000] gptu: succeeded to request irq 128 
 +[    0.264000] gptu: succeeded to request irq 129 
 +[    0.268000] gptu: succeeded to request irq 130 
 +[    0.272000] gptu: succeeded to request irq 131 
 +[    0.284000] lantiq,vmmc 1f103000.vmmc:​ requested GPIO 255 
 +[    0.288000] lantiq,vmmc 1f103000.vmmc:​ reserved 1MB at 0x03900000 
 +[    0.304000] squashfs: version 4.0 (2009/​01/​31) Phillip Lougher 
 +[    0.308000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
 +[    0.320000] msgmni has been set to 118 
 +[    0.324000] io scheduler noop registered 
 +[    0.328000] io scheduler deadline registered (default) 
 +[    0.336000] 1e100c00.serial:​ ttyLTQ0 at MMIO 0x1e100c00 (irq = 112) is a lantiq,​asc 
 +[    0.344000] console [ttyLTQ0] enabled, bootconsole disabled 
 +[    0.360000] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022cb 
 +[    0.368000] Amd/Fujitsu Extended Query Table at 0x0040 
 +[    0.372000] ​  ​Amd/​Fujitsu Extended Query version 1.1. 
 +[    0.376000] number of CFI chips: 1 
 +[    0.380000] 4 ofpart partitions found on MTD device ltq_nor 
 +[    0.384000] Creating 4 MTD partitions on "​ltq_nor":​ 
 +[    0.388000] 0x000000000000-0x000000030000 : "​brnboot"​ 
 +[    0.396000] 0x000000030000-0x000000430000 : "​rootfs_data"​ 
 +[    0.404000] 0x000000430000-0x0000007f0000 : "​firmware"​ 
 +[    0.416000] 2 uimage-fw partitions found on MTD device firmware 
 +[    0.420000] 0x000000430000-0x00000057f5a7 : "​kernel"​ 
 +[    0.428000] mtd: partition "​kernel"​ must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only 
 +[    0.440000] 0x00000057f5a7-0x0000007f0000 : "​rootfs"​ 
 +[    0.444000] mtd: partition "​rootfs"​ must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only 
 +[    0.460000] mtd: device 4 (rootfs) set to be root filesystem 
 +[    0.464000] mtd: partition "​rootfs_data"​ created automatically,​ ofs=0x7b0000,​ len=0x40000 
 +[    0.472000] 0x0000007b0000-0x0000007f0000 : "​rootfs_data"​ 
 +[    0.528000] 0x0000007f0000-0x000000800000 : "​art"​ 
 +[    0.568000] switch0: Atheros AR8216 rev. 1 switch registered on 1e180000.etop-ff 
 +[    0.608000] libphy: ltq_mii: probed 
 +[    0.704000] eth0: attached PHY [Atheros AR8216/​AR8236/​AR8316] (phy_addr=1e180000.etop-ff:​00,​ irq=-1) 
 +[    0.716000] wdt 1f8803f0.watchdog:​ Init done 
 +[    0.720000] leds-gpio gpio-leds.5:​ pins are not configured from the driver 
 +[    0.732000] TCP: cubic registered 
 +[    0.732000] NET: Registered protocol family 17 
 +[    0.740000] 8021q: 802.1Q VLAN Support v1.8 
 +[    0.748000] UBIFS error (pid 1): ubifs_mount:​ cannot open "​ubi0:​rootfs",​ error -19 
 +[    0.768000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4. 
 +[    0.776000] Freeing unused kernel memory: 180K (803b3000 - 803e0000) 
 +[    5.776000] IFXUSB: ifxusb_hcd: version 3.2 B110801 
 +[    6.284000] IFXUSB: USB core #0 soft-reset 
 +[    6.488000] IFXUSB: USB core #0 soft-reset 
 +[    6.492000] ifxusb_hcd ifxusb_hcd: IFX USB Controller 
 +[    6.496000] ifxusb_hcd ifxusb_hcd: new USB bus registered, assigned bus number 1 
 +[    6.504000] ifxusb_hcd ifxusb_hcd: irq 62, io mem 0xbe101000 
 +[    6.508000] IFXUSB: Mode Mismatch Interrupt: currently in Host mode 
 +[    6.516000] IFXUSB: Mode Mismatch Interrupt: currently in Host mode 
 +[    6.520000] IFXUSB: Init: Power Port (0) 
 +[    6.528000] hub 1-0:1.0: USB hub found 
 +[    6.528000] hub 1-0:1.0: 1 port detected 
 +[    6.532000] ifxusb_hcd ifxusb_hcd: requested GPIO 238 
 +[   ​12.312000] NET: Registered protocol family 10 
 +[   ​12.324000] NET: Registered protocol family 8 
 +[   ​12.328000] NET: Registered protocol family 20 
 +[   ​12.340000] PPP generic driver version 2.4.2 
 +[   ​12.360000] nf_conntrack version 0.5.0 (952 buckets, 3808 max) 
 +[   ​12.372000] ip6_tables: (C) 2000-2006 Netfilter Core Team 
 +[   ​12.392000] IFX MEI Version 5.00.00 
 +[   ​12.408000] Infineon CPE API Driver version: DSL CPE API V3.24.4.4 
 +[   ​12.420000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea 
 +[   ​12.428000] Backport generated by backports.git backports-20140320-37-g5c33da0 
 +[   ​12.440000] ip_tables: (C) 2000-2006 Netfilter Core Team 
 +[   ​12.460000] ATM1.0.26 ​   ATM (A1) firmware version 0.17 
 +[   ​12.464000] ifxmips_atm:​ ATM init succeed 
 +[   ​12.472000] Infineon Technologies DEU driver version 2.0.0  
 +[   ​12.476000] Danube Chip ver. 1.4 detected.  
 +[   ​12.492000] IFX DEU DES initialized (multiblock). 
 +[   ​12.500000] IFX DEU AES initialized (multiblock). 
 +[   ​12.504000] IFX DEU SHA1 initialized. 
 +[   ​12.512000] IFX DEU MD5 initialized. 
 +[   ​12.544000] NET: Registered protocol family 24 
 +[   ​12.592000] xt_time: kernel timezone is -0000 
 +[   ​12.684000] cfg80211: Calling CRDA to update world regulatory domain 
 +[   ​12.688000] cfg80211: World regulatory domain updated: 
 +[   ​12.692000] cfg80211: ​ DFS Master region: unset 
 +[   ​12.696000] cfg80211: ​  ​(start_freq - end_freq @ bandwidth), (max_antenna_gain,​ max_eirp), (dfs_cac_time) 
 +[   ​12.704000] cfg80211: ​  ​(2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) 
 +[   ​12.712000] cfg80211: ​  ​(2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) 
 +[   ​12.720000] cfg80211: ​  ​(2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) 
 +[   ​12.728000] cfg80211: ​  ​(5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A) 
 +[   ​12.736000] cfg80211: ​  ​(5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) 
 +[   ​12.744000] cfg80211: ​  ​(5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) 
 +[   ​12.752000] cfg80211: ​  ​(5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) 
 +[   ​12.760000] cfg80211: ​  ​(57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) 
 +[   ​12.880000] PCI: Enabling device 0000:​00:​0e.0 (0000 -> 0002) 
 +[   ​12.892000] ath: phy0: eeprom contains invalid mac address: ff:​ff:​ff:​ff:​ff:​ff 
 +[   ​12.896000] ath: phy0: random mac address will be used: 4e:​c1:​de:​3f:​7a:​89 
 +[   ​12.904000] ath: EEPROM regdomain: 0x0 
 +[   ​12.904000] ath: EEPROM indicates default country code should be used 
 +[   ​12.904000] ath: doing EEPROM country->​regdmn map search 
 +[   ​12.904000] ath: country maps to regdmn code: 0x3a 
 +[   ​12.904000] ath: Country alpha2 being used: US 
 +[   ​12.904000] ath: Regpair used: 0x3a 
 +[   ​12.928000] ieee80211 phy0: Selected rate control algorithm '​minstrel_ht'​ 
 +[   ​12.992000] cfg80211: Calling CRDA for country: US 
 +[   ​13.004000] cfg80211: Regulatory domain changed to country: US 
 +[   ​13.008000] cfg80211: ​ DFS Master region: FCC 
 +[   ​13.012000] cfg80211: ​  ​(start_freq - end_freq @ bandwidth), (max_antenna_gain,​ max_eirp), (dfs_cac_time) 
 +[   ​13.020000] cfg80211: ​  ​(2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) 
 +[   ​13.028000] cfg80211: ​  ​(5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A) 
 +[   ​13.036000] cfg80211: ​  ​(5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s) 
 +[   ​13.044000] cfg80211: ​  ​(5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) 
 +[   ​13.052000] cfg80211: ​  ​(57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) 
 +[   ​13.060000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb8000000,​ irq=30 
 +[   ​25.204000] device eth0.1 entered promiscuous mode 
 +[   ​25.208000] device eth0 entered promiscuous mode 
 +[   ​25.220000] br-lan: port 1(eth0.1) entered forwarding state 
 +[   ​25.224000] br-lan: port 1(eth0.1) entered forwarding state 
 +[   ​27.228000] br-lan: port 1(eth0.1) entered forwarding state 
 +[   ​29.248000] jffs2: notice: (994) jffs2_build_xattr_subsystem:​ complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. 
 +</​code>​ 
 +</​p>​ 
 +</​HTML>​ 
 + 
 +==== OEM bootlog ==== 
 +<​HTML>​ 
 +<p style="​padding:​ 10px;​border:​1px solid grey;​height:​600px;​font:​10px/​14px Georgia, Garamond, Serif;​overflow:​Auto;​background-color:#​FFFFFF">​ 
 +<​code>​ 
 +ROM VER: 1.0.3 
 +CFG 01 
 +Readà 
 +ROM VER: 1.0.3 
 +CFG 01 
 +Read EEPROMX 
 + X 
 + 
 + 
 + 
 +======================================================================= 
 +Wireless ADSL IAD DANUBE Loader v1.01.06 build Oct 14 2009 11:46:45 
 +                    Arcadyan Technology Corporation 
 +======================================================================= 
 +MXIC MX29LV640EB bottom boot 16-bit mode found 
 + 
 +Copying boot params.....DONE 
 + 
 +Press Space Bar 3 times to enter command mode ... 
 +Get Primary to 1..... 
 +Flash Checking ​ Passed. 
 + 
 +Unzipping firmware at 0x80002000 ... with AREA[3][ZIP 3]  
 +[ZIP Extra] [ZIP 1]  done 
 +Ready to run firmware 
 + 
 + 
 +In c_entry() function ... 
 + 
 +install_exception  
 + 
 +Co config = 80008483 
 +[INIT] Interrupt ... 
 +##### _ftext ​     = 0x80002000 
 +##### _fdata ​     = 0x80854C70 
 +##### __bss_start = 0x808E2AB0 
 +##### end         = 0x8390E5E4 
 +allocate_memory_after_end:​ alloc from 839165F0 to 839A4440, length=581184 
 +##### Backup Data from 0x80854C70 to 0x839165E4~0x839A4424 len 581184 
 +##### Backup Data completed 
 +##### Backup Data verified 
 +[GPIO FLOW] SetGpio() Begin .. 
 +[GPIO FLOW] SetGpio() End. 
 +[INIT] System Log Pool startup ... 
 +[INIT] MTinitialize .. 
 +[INIT] usrclk 
 +CPU Clock 333333334 Hz 
 +mips_counter_frequency:​166666667 
 +r4k_offset: 00028b0a(166666) 
 +init_US_counter : time1 = 43 , time2 = 40000066, diff 40000023 
 +US_counter = 68 
 + cnt1 40669512 cnt2 40671262, diff 1750 
 + cnt1 41262662 cnt2 41264479, diff 1817 
 +Runtime code version: 1.06.000 
 +System startup... 
 +[INIT] Memory COLOR 0, 5097152 bytes .. 
 +[INIT] Memory COLOR 1, 6291456 bytes .. 
 +[INIT] Memory COLOR 2, 8809456 bytes .. 
 +InitCommSys:​ RESOURCE_BASE = 108, NUMRES = 640 
 +InitCommSys:​ EVENT_BASE = 238, NUMEVT = 818 
 +InitCommSys:​ MAILBOX_BASE = 6, NUMMBX = 64 
 + 
 +rzMemory start: 0x81D71784, end 0x82155894, size 4079888 
 +Build Day = Mar 10 2010 
 +>>>>​set_MP_pass_Magic to 3 
 +MXIC MX29LV640EB bottom boot 16-bit mode found 
 +Set flash memory layout to Boot Parameters found !!! 
 +Use Flash Data as COSIC Parameters 
 +>>>>>>>>>>>>>>>>>>​ HWOption set BMC Param : ucOscTrimValLOW f1 
 +>>>>>>>>>>>>>>>>>>​ HWOption set BMC Param : g_ucOscTrimValHigh 0 
 +Bootcode version: v1.01.06 
 +Serial number: J038079190 
 +Hardware version: 01 
 +pBootParams->​password 38 32 39 (20)  
 +Entered default password checking 8 8 
 +fread_config_b>​ sizeof(struct III_Config_t) is 551916 
 +MXIC MX29LV640EB bottom boot 16-bit mode found 
 +fread_config_b>​ 44997 bytes read from flash 
 +Decompression ratio = g 
 +fread_config_b>​ 642856 bytes decompressed successfully. 
 + 
 +my CFGVersionMagic = 33343536 
 +my CFGsize = 551936, my CFGDescSize = 39328 
 +my Version = 1.06.000 
 +My CfgHexSize:​12809 
 +My CFGDescSize:​39328 
 + 
 +old CFGVersionMagic on flash = 33343536 
 +CFGsize on flash = 551936, CFGDescSize on flash = 39328 
 +Version on flash = 1.06.000 
 +=== 
 +Old CfgHexSize = 12809, Old CFGDescSize = 39328 
 +Unzipping from 818EBA94 to 818E20E4 ... [ZIP 1] allocate_memory_after_end:​ alloc from 839A4440 to 839B82C0, length=81516 
 +[ZIP 1 49492c30] done 
 +Uncompressed size = 39326 
 +Tail1 : END_III_Config_t 
 + 
 +Size of Old CFG_DESC is :39326!!! 
 +1.useCfgDesc:​1 
 +Unzipping from 818DEEC0 to 818D5510 ... [ZIP 1] [ZIP 1 49492c30] done 
 +Uncompressed size = 39326 
 +2.useCfgDesc:​1 
 +Tail : END_III_Config_t 
 + 
 +useCfgDesc:​3 
 + 
 +Restore Config file from ver: 1.06.000 !!! 
 + 
 +to copy from gConfig to gSetting in restore_config 
 +DS_Tail:​[t_ARV8539PW] 
 +RELEASE_BUF_AND_RETURN_OK ​    - restore_config() #13942, in danube/​config.c 
 +     - restore_config() #13943, in danube/​config.c 
 +restore config OK. nCfgDescLen=564753. 
 +----------------------->​ Checking SysLog in Flash OK. nLen=78103 
 +----------------------->​ Restore SysLog from Flash 78082 bytes from 89e17 
 +----------------------->​ Restore Call Log from Flash 15 bytes from 9cf20 
 +!!! Invalid wireless channel range 0 ~ 255 
 +!!! Use default value 1 ~ 13 
 +====xxx==============================-->​425@-230;​600(.4/​.4/​1,​.4/​3/​1) 
 +-->​425@-230;​60(.2/​.2/​1,​.2/​5/​1) 
 +-->​600(.9/​4.8) 
 +-->​600(.3/​.5,​.3/​3) 
 +-->​600(.9/​3.9) 
 +check_WAN_switch returns 0 
 +default route: 0.0.0.0 
 +BufferInit:​ 
 +BUF_HDR_SZ=160 BUF_ALIGN_SZ=0 BUFFER_OFFSET=384 
 +BUF_BUFSZ0=544 BUF_BUFSZ1=3424 
 +NUM_OF_B0=0 NUM_OF_B1=3000 
 +BUF_POOL0_SZ=0 BUF_POOL1_SZ=10752000 
 +sizeof(BUFFER0)=704,​sizeof(BUFFER1)=3584 
 +*BUF0=0x82bfc558 *BUF1=0x821bb538 
 +Altgn *BUF0=0x82bfc560 *BUF1=0x821bb540 
 +End at BUF0:​0x82bfc560,​ BUF1:​0x82bfc540 
 + 
 +BUF0[0]=0x82bfc560 BUF1[0]=0x821bb540 
 + 
 +buffer0 pointer init OK! 
 +buffer1 pointer init OK! 
 +NetJobTableInit>​ 
 +atheros_tmr_init>​ base_timer.expire=2147483647 
 +RUNTASK id=1 rapi_tmr_task ... 
 +[qm_lnk_init] CLOCKHZ=1000 ... 
 +[qm_lnk_init] add if 3 into QM link 0 
 +[qm_cbq_enable] no QM attached 
 +[qm_cbq_detach] no QM is attached at link 0 
 +f=18446744072906732521/​100000,​ ns_per_byte=1090005888/​100000 
 +New cls: id=0, bw=8080 ns/byte, maxd=0 ms, 
 +         ​maxb=32,​ minb=2, avgpktsz=0, maxpktsz=0,​ 
 +         ​offtime=1,​ parent=0, borrow=0 
 +         ​pri=0,​ maxidle=1, minidle=0,​ 
 +         ​maxq=96,​ clsfg=17 
 +f=2002645667/​100000,​ ns_per_byte=1083109375/​100000 
 +New cls: id=1, bw=808080 ns/byte, maxd=0 ms, 
 +         ​maxb=16,​ minb=1, avgpktsz=0, maxpktsz=0,​ 
 +         ​offtime=1,​ parent=8390d28c,​ borrow=8390d28c 
 +         ​pri=5,​ maxidle=1, minidle=0,​ 
 +         ​maxq=48,​ clsfg=21 
 +qm_cbq_attach():​ cbqp->​cbq_res=99 
 +f=90439747/​100000,​ ns_per_byte=1089990048/​100000 
 +New cls: id=2, bw=8162 ns/byte, maxd=0 ms, 
 +         ​maxb=32,​ minb=4, avgpktsz=0, maxpktsz=0,​ 
 +         ​offtime=1,​ parent=8390d28c,​ borrow=8390d28c 
 +         ​pri=5,​ maxidle=1, minidle=0,​ 
 +         ​maxq=48,​ clsfg=21 
 +f=18446744073260761087/​100000,​ ns_per_byte=1072693248/​100000 
 +New cls: id=3, bw=799999999 ns/byte, maxd=0 ms, 
 +         ​maxb=16,​ minb=4, avgpktsz=0, maxpktsz=0,​ 
 +         ​offtime=1,​ parent=8390bc8c,​ borrow=8390bc8c 
 +         ​pri=0,​ maxidle=0, minidle=0,​ 
 +         ​maxq=96,​ clsfg=21 
 +f=18446744073260761087/​100000,​ ns_per_byte=1072693248/​100000 
 +New cls: id=4, bw=799999999 ns/byte, maxd=0 ms, 
 +         ​maxb=16,​ minb=4, avgpktsz=0, maxpktsz=0,​ 
 +         ​offtime=1,​ parent=8390bc8c,​ borrow=8390bc8c 
 +         ​pri=1,​ maxidle=0, minidle=0,​ 
 +         ​maxq=48,​ clsfg=23 
 +f=18446744073260761087/​100000,​ ns_per_byte=1072693248/​100000 
 +New cls: id=5, bw=799999999 ns/byte, maxd=0 ms, 
 +         ​maxb=16,​ minb=4, avgpktsz=0, maxpktsz=0,​ 
 +         ​offtime=1,​ parent=8390bc8c,​ borrow=8390bc8c 
 +         ​pri=2,​ maxidle=0, minidle=0,​ 
 +         ​maxq=48,​ clsfg=23 
 +f=18446744073260761087/​100000,​ ns_per_byte=1072693248/​100000 
 +New cls: id=6, bw=799999999 ns/byte, maxd=0 ms, 
 +         ​maxb=16,​ minb=4, avgpktsz=0, maxpktsz=0,​ 
 +         ​offtime=1,​ parent=8390bc8c,​ borrow=8390bc8c 
 +         ​pri=3,​ maxidle=0, minidle=0,​ 
 +         ​maxq=48,​ clsfg=23 
 +f=18446744073260761087/​100000,​ ns_per_byte=1072693248/​100000 
 +New cls: id=7, bw=799999999 ns/byte, maxd=0 ms, 
 +         ​maxb=16,​ minb=4, avgpktsz=0, maxpktsz=0,​ 
 +         ​offtime=1,​ parent=8390bc8c,​ borrow=8390bc8c 
 +         ​pri=4,​ maxidle=0, minidle=0,​ 
 +         ​maxq=48,​ clsfg=23 
 +f=90439747/​100000,​ ns_per_byte=1089990048/​100000 
 +New cls: id=8, bw=8162 ns/byte, maxd=0 ms, 
 +         ​maxb=16,​ minb=4, avgpktsz=0, maxpktsz=0,​ 
 +         ​offtime=1,​ parent=8390bc8c,​ borrow=8390bc8c 
 +         ​pri=6,​ maxidle=1, minidle=0,​ 
 +         ​maxq=48,​ clsfg=20 
 +[qm_cbq_reset_dstcp_ctrl] dstcp_ctrl_fg=0x0,​ dstcp_pkt_delay=0 ms, dstcp_max_burst=6056 bytes 
 +CLOCKHZ=1000 
 +gConfig.Interface[0].IP_Addr = 127.0.0.1 
 +gConfig.Interface[0].Subnet_Mask = 255.255.255.255 
 +***** [iput_IpLinkUp] ifno=0, link_type:​12 
 +time = 08/01/2003, 00:00:00 
 +TRAP(linkUp) : send ok! 
 +Interface 0 ip = 127.0.0.1 
 + 
 +gConfig.Interface[1].IP_Addr = 192.168.2.1 
 +gConfig.Interface[1].Subnet_Mask = 255.255.255.0 
 +ether_register_vlan(1):​ binding not found 
 +ether_init(1):​ no tagged VLAN 
 +ifno=1, vlan=0, vid=1, port_mask=0xf 
 +DMA g_desc_list=0x818E86E0 
 +reset GPIO#13. 
 +danube_sw_chip_init:​ in MII mode 
 +init QoS for switch 
 +init QoS for switch 
 +enter athr_VLANInit 
 +[VLAN] port: 0x000f, ifCount=1 
 +------->​add port 2 to vlan 1 
 +------->​add port 3 to vlan 1 
 +------->​add port 4 to vlan 1 
 +------->​add port 5 to vlan 1 
 +mac_0_init: interface 1 registered to VLAN 1, port_mask=f 
 +MAC Address: 88:​25:​2c:​80:​b1:​52 
 +***** [iput_IpLinkUp] ifno=1, link_type:​12 
 +time = 08/01/2003, 00:00:00 
 +TRAP(linkUp) : send ok! 
 +Interface 1 ip = 192.168.2.1 
 + 
 +gConfig.Interface[2].IP_Addr = 0.0.0.0 
 +gConfig.Interface[2].Subnet_Mask = 0.0.0.0 
 +ether_register_vlan(2):​ binding not found 
 +ether_init(2):​ no tagged VLAN 
 +danube pci startup... 
 +PCI clock 33.3MHz 
 +DANUBE_GPIO_P1_ALTSEL0=447 
 +DANUBE_GPIO_P1_ALTSEL1=0 
 +DANUBE_GPIO_P1_DIR=91f6 
 +[HWLAN] ifno=2 irno=7 port=0x00000000 
 +[PCI] devtag=00000070 probe=80113be0 
 +##### We detect Merlin (PCI) without EEPROM ##### 
 +[HWLAN] devtag = 00000070 
 +[HWLAN] Vendor ID 0x168c 
 +[HWLAN] Device ID 0x29 
 +[HWLAN] Base Addr 0xb8000000 
 +[HWLAN] SVendor ID 0x168c 
 +[HWLAN] SDevice ID 0xee1c 
 +[HWLAN] Revision ID 0x1 
 +[HWLAN] interrupt vector 0x1 
 +ath_pci_probe : pdev=0x818e8348 
 +PCI_CACHE_LINE_SIZE : 8 
 +after PCI_LATENCYTIMER 
 +pci_read_config_dword( dev_id, 0x40 ) return 32896 
 +ath_pci_probe : dev->​name wifi0 
 +T_WIFI_INT=12 
 +dev=0x8219a7fc 
 +dev->​priv=0x830395e8 
 +call ath_attach 1 : dev 8219a7fc name 8219b4a8 wifi0 
 +ATH_INIT_TQUEUE() : 8012276c ??? 
 +ATH_INIT_TQUEUE() : 8012d64c ??? 
 +ATH_INIT_TQUEUE() : 80134ae4 ??? 
 +ATH_INIT_TQUEUE() : 8011d73c ??? 
 +ATH_INIT_TQUEUE() : 80120dec ??? 
 +ATH_INIT_TQUEUE() : 8012276c ??? 
 +ATH_INIT_TQUEUE() : 8011d68c ??? 
 +ATH_INIT_TQUEUE() : 8011da0c ??? 
 +EEPROM : EEP_MAP_DEFAULT !!!!! 
 +Powertable magic: a55a 
 +ar5416CheckEepromDef:​ Read Magic = 0xA55A 
 +need_swap = True. 
 +EEPROM Endianness is not native.. Changing  
 +regDmn[0] 0 
 +regDmn[1] 1f 
 +change it to 1f1f 
 +[HWLAN] Set HWLAN MAC as LAN MAC ..  
 +ath_getchannels>​ nchan=50 
 +ath_getchannels>​ nchan=50 
 +ath_getchannels>​ nchan=50 match:9 
 +Chan  Freq  RegPwr ​ HT   CTL CTL_U CTL_L DFS 
 +   ​1 ​ 2412n     ​20 ​ HT20  1    0    1     N 
 +   ​2 ​ 2417n     ​20 ​ HT20  1    0    1     N 
 +   ​3 ​ 2422n     ​20 ​ HT40  1    0    1     N 
 +   ​4 ​ 2427n     ​20 ​ HT40  1    0    1     N 
 +   ​5 ​ 2432n     ​20 ​ HT40  1    1    1     N 
 +   ​6 ​ 2437n     ​20 ​ HT40  1    1    1     N 
 +   ​7 ​ 2442n     ​20 ​ HT40  1    1    1     N 
 +   ​8 ​ 2447n     ​20 ​ HT40  1    1    1     N 
 +   ​9 ​ 2452n     ​20 ​ HT40  1    1    1     N 
 +  10  2457n     ​20 ​ HT40  1    1    0     N 
 +  11  2462n     ​20 ​ HT40  1    1    0     N 
 +  12  2467n     ​20 ​ HT20  1    1    0     N 
 +  13  2472n     ​20 ​ HT20  1    1    0     N 
 +  36  5180n     ​30 ​ HT20  1    0    1     N 
 +  38  5190n     ​20 ​ HT40  1    0    0     N 
 +  40  5200n     ​30 ​ HT20  1    1    0     N 
 +  44  5220n     ​30 ​ HT20  1    0    1     N 
 +  46  5230n     ​20 ​ HT40  1    0    0     N 
 +  48  5240n     ​30 ​ HT20  1    1    0     N 
 +  52  5260n     ​20 ​ HT20  1    0    1     Y 
 +  54  5270n     ​20 ​ HT40  1    0    0     Y 
 +  56  5280n     ​20 ​ HT20  1    1    0     Y 
 +  60  5300n     ​20 ​ HT20  1    0    1     Y 
 +  62  5310n     ​20 ​ HT40  1    0    0     Y 
 +  64  5320n     ​20 ​ HT20  1    1    0     Y 
 + ​100 ​ 5500n     ​27 ​ HT20  1    0    1     Y 
 + ​102 ​ 5510n     ​27 ​ HT40  1    0    0     Y 
 + ​104 ​ 5520n     ​27 ​ HT20  1    1    0     Y 
 + ​108 ​ 5540n     ​27 ​ HT20  1    0    1     Y 
 + ​110 ​ 5550n     ​27 ​ HT40  1    0    0     Y 
 + ​112 ​ 5560n     ​27 ​ HT20  1    1    0     Y 
 + ​116 ​ 5580n     ​27 ​ HT20  1    0    1     Y 
 + ​118 ​ 5590n     ​27 ​ HT40  1    0    0     Y 
 + ​120 ​ 5600n     ​27 ​ HT20  1    1    0     Y 
 + ​124 ​ 5620n     ​27 ​ HT20  1    0    1     Y 
 + ​126 ​ 5630n     ​27 ​ HT40  1    0    0     Y 
 + ​128 ​ 5640n     ​27 ​ HT20  1    1    0     Y 
 + ​132 ​ 5660n     ​27 ​ HT20  1    0    1     Y 
 + ​134 ​ 5670n     ​27 ​ HT40  1    0    0     Y 
 + ​136 ​ 5680n     ​27 ​ HT20  1    1    0     Y 
 + ​140 ​ 5700n     ​27 ​ HT20  1    0    0     Y 
 +ath_countrycode : 276 
 +ATH_INIT_TQUEUE() : 8011cd84 ??? 
 +ATH_INIT_TQUEUE() : 8011cd84 ??? 
 +ATH_INIT_TQUEUE() : 8011cd84 ??? 
 +dfs_init_radar_filters:​ dfs->​dfs_rinfo.rn_numradars:​ 0 
 +DFS min filter rssiThresh = 21 
 +DFS max pulse dur = 131 ticks 
 +sc->​sc_hasclrkey : 1 
 +ieee80211_set11gbasicrates  
 +wifi0: 11na rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps 
 +wifi0: 11na MCS:  0,​1,​2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12,​13,​14,​15 
 +wifi0: 11ng rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps 
 +wifi0: 11ng MCS:  0,​1,​2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12,​13,​14,​15 
 +wifi0: mac 128.2 phy 13.0 radio 12.0 
 +wifi0: Use hw queue 1 for WME_AC_BE traffic 
 +wifi0: Use hw queue 0 for WME_AC_BK traffic 
 +wifi0: Use hw queue 2 for WME_AC_VI traffic 
 +wifi0: Use hw queue 3 for WME_AC_VO traffic 
 +wifi0: Use hw queue 8 for CAB traffic 
 +wifi0: Use hw queue 9 for beacons 
 +wifi0: Use hw queue 7 for UAPSD 
 +call ath_attach 2 : dev 8219a7fc name 8219b4a8 wifi0 
 +[wifi0] : Atheros 9280 : mem=0xffffffffb8000000,​ irq=0 hw_base=0x80000000 
 +[HWLAN] hwlan_init() end. 
 +***** [iput_IpLinkUp] ifno=2, link_type:​12 
 +time = 08/01/2003, 00:00:00 
 +TRAP(linkUp) : send ok! 
 +[HWLAN] hwlan_ioctl() ..  
 +Interface 2 ip = 192.168.2.1 
 + 
 +[HWLAN] hwlan_ioctl() ..  
 +gConfig.Interface[3].IP_Addr = 0.0.0.0 
 +gConfig.Interface[3].Subnet_Mask = 0.0.0.0 
 +ether_register_vlan(3):​ phy_idx=0 
 +ether_register_vlan(3):​ record vlan-id 7 in entry 0 
 +ether_init(3):​ registered to vlan 0, trunk 0 
 +ether_init(3):​ vlan_tagged=1 
 +ether_init(3):​ map to physical ifno 3 
 +ppe: ATM init succeeded (firmware version 1.1.0.2.1.13) 
 +ATM_UBR 
 +Init SAR ifno:3 g_atm_vcc[0] CONN:1 VPI/​VCI:​1/​32 
 +MAC Address: 88:​25:​2c:​80:​b1:​53 
 +Interface 3 ip = 0.0.0.0 
 + 
 +gConfig.Interface[5].IP_Addr = 0.0.0.0 
 +gConfig.Interface[5].Subnet_Mask = 0.0.0.0 
 +IFLNK_PPPOE init : (Linkp)ifno = 5 idx = 2 
 +IFLNK_PPPOE init : (Driverp)ifno = 5 idx = 3 
 +pppInit> set (PPPShutdownRequest[ifno] = 0) 
 +Perferred method at Start = 1 
 +Interface 5 ip = 0.0.0.0 
 + 
 +gConfig.Interface[8].IP_Addr = 0.0.0.0 
 +gConfig.Interface[8].Subnet_Mask = 0.0.0.0 
 +ether_register_vlan(8):​ binding not found 
 +ether_init(8):​ no tagged VLAN 
 +[HWLAN] ifno=8 irno=7 port=0x00000000 
 +***** [iput_IpLinkUp] ifno=8, link_type:​12 
 +time = 08/01/2003, 00:00:00 
 +TRAP(linkUp) : send ok! 
 +[HWLAN] hwlan_ioctl() ..  
 +Interface 8 ip = 192.168.2.1 
 + 
 +[HWLAN] hwlan_ioctl() ..  
 +gConfig.Interface[9].IP_Addr = 0.0.0.0 
 +gConfig.Interface[9].Subnet_Mask = 0.0.0.0 
 +ether_register_vlan(9):​ binding not found 
 +ether_init(9):​ no tagged VLAN 
 +[HWLAN] ifno=9 irno=7 port=0x00000000 
 +***** [iput_IpLinkUp] ifno=9, link_type:​12 
 +time = 08/01/2003, 00:00:00 
 +TRAP(linkUp) : send ok! 
 +[HWLAN] hwlan_ioctl() ..  
 +Interface 9 ip = 192.168.2.1 
 + 
 +[HWLAN] hwlan_ioctl() ..  
 +gConfig.Interface[10].IP_Addr = 0.0.0.0 
 +gConfig.Interface[10].Subnet_Mask = 0.0.0.0 
 +ether_register_vlan(10):​ binding not found 
 +ether_init(10):​ no tagged VLAN 
 +[HWLAN] ifno=10 irno=7 port=0x00000000 
 +***** [iput_IpLinkUp] ifno=10, link_type:​12 
 +time = 08/01/2003, 00:00:00 
 +TRAP(linkUp) : send ok! 
 +[HWLAN] hwlan_ioctl() ..  
 +Interface 10 ip = 192.168.2.1 
 + 
 +[HWLAN] hwlan_ioctl() ..  
 +gConfig.Interface[11].IP_Addr = 0.0.0.0 
 +gConfig.Interface[11].Subnet_Mask = 0.0.0.0 
 +ether_register_vlan(11):​ binding not found 
 +ether_init(11):​ no tagged VLAN 
 +[HWLAN] ifno=11 irno=7 port=0x00000000 
 +***** [iput_IpLinkUp] ifno=11, link_type:​12 
 +time = 08/01/2003, 00:00:00 
 +TRAP(linkUp) : send ok! 
 +[HWLAN] hwlan_ioctl() ..  
 +Interface 11 ip = 192.168.2.1 
 + 
 +[HWLAN] hwlan_ioctl() ..  
 +gConfig.Interface[14].IP_Addr = 0.0.0.0 
 +gConfig.Interface[14].Subnet_Mask = 0.0.0.0 
 +ether_register_vlan(14):​ phy_idx=0 
 +ether_register_vlan(14):​ record vlan-id 8 in entry 1 
 +ether_init(14):​ registered to vlan 1, trunk 0 
 +ether_init(14):​ vlan_tagged=1 
 +ether_init(14):​ phy already initialized 
 +Interface 14 ip = 0.0.0.0 
 + 
 +gConfig.Interface[16].IP_Addr = 0.0.0.0 
 +gConfig.Interface[16].Subnet_Mask = 0.0.0.0 
 +pppInit> set (PPPShutdownRequest[ifno] = 0) 
 +if_umts_init() WAN interface 16, UMTS-COM1: baudrate=115200  
 +RUNTASK id=3 umtsReceQueueTsk... 
 +RUNTASK id=4 umtsReceTsk... 
 +RUNTASK id=5 umtsWritTsk... 
 +Interface 16 ip = 0.0.0.0 
 + 
 +ruleCheck()>​ Group: 0,  Error: Useless rule index will be truncated, from idx:1 
 +ruleCheck()>​ Group: 1,  Error: Useless rule index will be truncated, from idx:22 
 +ruleCheck()>​ Group: 2,  Error: Useless rule index will be truncated, from idx:0 
 +CBAC rule format check succeed !! 
 +reqCBACBuf()>​ init match pool, Have: 1000 
 +Memory Address: 0xffffffff838a7e14 ~ 0xffffffff838aeb90 
 +reqCBACBuf()>​ init timeGap pool, Have: 10000 
 +Memory Address: 0xffffffff838aeb90 ~ 0xffffffff838df8e4 
 +reqCBACBuf()>​ init sameHost pool, Have: 2000 
 +Memory Address: 0xffffffff838df8e4 ~ 0xffffffff838ef304 
 +CBAC rule pool initialized !! 
 +[init_if] local_if_mask=0xf07 
 +[init_if] local_wiredif_mask=0x2 
 +[init_if] local_wirelessif_mask=0xf04 
 +[init_if] localorVPN_if_mask=0xf07 
 +1 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 
 +2 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 
 +3 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 
 +5 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 
 +8 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 
 +9 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 
 +10 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 
 +11 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 
 +14 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 
 +16 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 
 +Init NAT data structure 
 +Low priority IF task : 0 
 +RUNTASK id=6 if_task if0... 
 +Low priority IF task : 1 
 +RUNTASK id=7 if_task if1... 
 +Low priority IF task : 2 
 +RUNTASK id=8 if_task if2... 
 +Low priority IF task : 3 
 +RUNTASK id=9 if_task if3... 
 +Low priority IF task : 8 
 +RUNTASK id=10 if_task if8... 
 +Low priority IF task : 9 
 +RUNTASK id=11 if_task if9... 
 +Low priority IF task : 10 
 +RUNTASK id=12 if_task if10... 
 +Low priority IF task : 11 
 +RUNTASK id=13 if_task if11... 
 +High priority IF task : 14 
 +RUNTASK id=14 if_task if14... 
 +High priority IF task : 16 
 +RUNTASK id=15 if_task if16... 
 +RUNTASK id=16 timer_task... 
 +RUNTASK id=17 conn_mgr... 
 +RUNTASK id=18 main_8021x... 
 +Build Day = Mar 10 2010 
 +[VFS_init] Start... 
 +[VFS_init] vfsState:​1 
 +vfs_codepage_init() TimeZone:​23,​ vfs_cp_idx:​23,​ vfs_cp_ID:​5 
 +fat_codePageInit() TimeZone:​23,​ codePage:​CP850,​ cPID:5, cpSize:256, toUpSize:​30 
 +ntfs_codepage timezone:​23,​ lan= 0 
 +ntfs_codePageInit() TimeZone:​23,​ codePage:​5 
 +==[vfs_register_filesystem]============================ 
 +list size:​1, ​ Method:​0x80857eac 
 +  1) Type:0xfc, Name:​BRN-VFS 
 +================================================================= 
 +[VFS_init] VFS ROOT FS init OK 
 +==[vfs_register_filesystem]============================ 
 +list size:​7, ​ Method:​0x808580e0 
 +  1) Type:0x01, Name:​FAT12 
 +  2) Type:0x04, Name:​FAT16 
 +  3) Type:0x06, Name:​FAT16 
 +  4) Type:0x0b, Name:​FAT32 
 +  5) Type:0x0c, Name:​FAT32 
 +  6) Type:0x0e, Name:​FAT16 
 +  7) Type:0x81, Name:​Minix 
 +================================================================= 
 +[VFS_init] FAT init OK 
 +==[vfs_register_filesystem]============================ 
 +list size:​1, ​ Method:​0x80858318 
 +  1) Type:0x07, Name:​NTFS/​HPFS 
 +================================================================= 
 +[VFS_init] NTFS init OK 
 +[VFS_init]-[vfs_mount_root] Start... 
 +[VFS_init]-[vfs_mount_root] Init <​root>​ OK... 
 +[VFS_init]-[vfs_mount_root] Init <dev> OK... 
 +[VFS_init]-[vfs_mount_root] Init <mnt> OK... 
 +[0-START]========================================= 
 +  Node 000-[\], ​ DIR, MountFlag:​0x00 
 +[0-END]=========================================== 
 +  [1-START]========================================= 
 +    Node 001-[dev], ​ DIR, MountFlag:​0x00 
 +  [1-END]=========================================== 
 +  [1-START]========================================= 
 +    Node 002-[mnt], ​ DIR, MountFlag:​0x00 
 +  [1-END]=========================================== 
 +dump_inode() freeCnt:77, usedCnt:3 
 +setUsbPciInfo() cpu_to_usb_addr_shift[3]:​0x00000000,​ usb_to_cpu_addr_shift[3]:​0x00000000 
 +usb_pci_probe() Found Synopsis OTG, baseAddr:​0xbe101000 
 +usb_power_set() isOn:1 
 +usb_power_set() Previous power off:0, current time:0 
 +usb_power_set(2) min time delay:6000, current delay:0 
 +usb_hcd_init() func(0):0 
 +usb_hcd_init() func(1):0 
 +usb_hcd_init() func(2):0 
 +usb_hcd_init() func(3):1 
 +localhc_init() install otg driver(self->​driver = 0x808C0994, otg_driver=0x808C0994). 
 +usb_hcd_init():​ succ. 
 +RUNTASK id=21 period_task... 
 +RUNTASK id=22 check_mail_task... 
 +RUNTASK id=23 check_rss_task... 
 + 
 +========== ADSL Modem initialization OK ! ====== 
 + 
 +RUNTASK id=24 dhcp_daemon... 
 +RUNTASK id=25 dhcp_clt...on interface 14 
 +main()> usb:1, ftp:0 
 +Primary image: 1, flash area 3 
 +found signature: 78h 56h 34h 12h 
 +ulImgLens=2014188,​ LENGTH[3]-12=3932148 
 +length checking OK 
 +[0] find End at 0xFFFFFFFFB061B800 len=2014188 
 +found signature: 78h 56h 34h 12h 
 +ulImgLens=319468,​ LENGTH[3]-12=3932148 
 +length checking OK 
 +[1] find End at 0xFFFFFFFFB0669800 len=319468 
 +---[ ZIP1 head start in 0xFFFFFFFFB0669C00 ]--- 
 +found signature: 78h 56h 34h 12h 
 +ulImgLens=163864,​ LENGTH[3]-12=3932148 
 +length checking OK 
 +[2] find End at 0xFFFFFFFFB0691C00 len=163864 
 +---[ ZIP1 head start in 0xFFFFFFFFB0692000 ]--- 
 +found signature: 78h 56h 34h 12h 
 +ulImgLens=417772,​ LENGTH[3]-12=3932148 
 +length checking OK 
 +[3] find End at 0xFFFFFFFFB06F7C00 len=417772 
 +---[ ZIP1 head start in 0xFFFFFFFFB06F8000 ]--- 
 +found signature: 78h 56h 34h 12h 
 +ulImgLens=241885,​ LENGTH[3]-12=3932148 
 +length checking OK 
 +[4] find End at 0xFFFFFFFFB0733000 len=241885 
 +Image[1] at 0xB0430000, len = 2014188 
 +Image[2] at 0xB061BC00, len = 319468 
 +Image[3] at 0xB0669C00, len = 163864 
 +Image[4] at 0xB0692000, len = 417772 
 +Image[5] at 0xB06F8000, len = 241885 
 +unzip for U/I from 0xb061bc00 size 319468 
 +Unzipping from B061BC00 to 83C00000 ... [ZIP 3] [ZIP 0]  
 +[ZIP Extra] [ZIP 1] [ZIP 1 2f534650] done 
 +Uncompressed size = 2461312 
 +drive start addr[0]=ffffffff83c00000,​ [1]=ffffffff83e58e80 
 +httpd: listen at 192.168.2.1:​80 
 +httpd: listen at 192.168.2.1:​443 
 +RUNTASK httpd... 
 +RUNTASK id=29 SSLClient ... 
 +g_Client_Cert_Array=0x81a42d80 
 +RUNTASK id=30 dnsproxy... 
 +startNBIOSTask()... 
 +RUNTASK id=31 nbios_main... 
 +RUNTASK id=32 padmin_task_entry... 
 +RUNTASK id=33 dhcpd_mgmt_task... 
 +UPnP is enabled 
 +UPNP Device initialize success! slot=34 
 +TR64 init is taken care by UPnP. 
 +Register StorageService Successful 
 +[0] Allocate mailbox 6 
 +[0] Allocate mailbox 7 
 +FirstUseDate:​2011-02-03T11:​06:​41Z 
 +RUNTASK id=37 wscmain... 
 +RUNTASK id=38 wsc_Send_eap_packet... 
 +RUNTASK id=39 wsc_Send_UPNP_packet... 
 +RUNTASK id=40 WSC_WaitUserAction_Task... 
 +Starting Multitask... 
 +run_project_task 
 +RUNTASK id=41 CMV_task... 
 +RUNTASK id=42 ds_tcp_policing... 
 +[0] Allocate resource 108, FreeResource = 1 
 +dma_device_register:​ no system buffer. 
 + 
 +call ifx_ssc_init() = 0 
 +call ifx_ssc_open() = 25 
 +SPI_Init! 
 +ifx_sscAllocConnection:​ device ISDN register sucessfully! 
 +ISDN ResetInit: SPI INIT first now iISDNID -2119947120 iISDNCS 0 
 +ifx_sscAllocConnection:​ device Proslic register sucessfully! 
 +ProDAAInitialize:​ SPI INIT first now ProSlicID -2119947208 ProSlicCS 2 
 +gptu: totally 6 16-bit timers/​counters 
 +cgu_get_fpi_bus_clock(2) = 83250000, clock_divider = 1 
 +request_timer(4,​ 0x0000010D, 5203124) 
 +Init timer (4) - OK 
 +T_WLAN_INT=2 
 +gSetting.CountryCode=0x8114 
 +gSetting.Interface[T_WLAN_INT].Link_Type=1 
 +RUNTASK id=44 apAppInit... 
 +RUNTASK id=47 ScanMIH_task... 
 + 
 +--> [is_power_on_reboot] reset_status = 0x20260008 
 + 
 +[qm_cbq_resetclst] n_totalcls=9 
 +init psock cnt=8000 
 +xSpeedtsk priority is 80 
 +[HWLAN] [1] rapi_tmr_task running  
 +ifno2dot1x_if[2]=0 
 +ifno2dot1x_if[12]=81 
 +ifno2dot1x_if[8]=82 
 +ifno2dot1x_if[9]=83 
 +ifno2dot1x_if[10]=84 
 +ifno2dot1x_if[11]=85 
 +dot1x_wireless_if_mask=0x1f04 
 +[main_8021x] dot1x_build_if_mapping() completed. 
 +apAppInit called ???? 
 +init rand with sys_time=29 
 +ath_create_vap:​ ifr.ifr_name = wifi0 (before ioctl) 
 +alloc_etherdev:​ name = wlan0 
 +GetWdsIfno: name = wlan0 
 +GetWdsIfno : return 2 , T_WDS_INT 8 
 +alloc_etherdev>​ dev->​priv = 0x81380584 ********** 
 +should asigned hard_start_xmit and open in dev structure ??? 
 +ReleaseWDS_ni : cnt 0 
 +ath_create_vap:​ ifr.ifr_name = wlan0 (after ioctl) 
 +apAppInit: ath_create_ap,​ T_WLAN_INT done 
 +apAppInit>​ if_table[T_WIFI_INT]=0x0 
 +wlan_confree_do>​ start ... 
 +[HWLAN] gSetting.Wireless_mode=0  
 +Wireless Mode 0, Mixed 802.11g and 802.11b 
 +wlan_confree_do>​ start ... 
 +in wlan_confree_do_setmode,​ 
 +------------------->​change mode to  11NG ,OK 
 +wlan_confree_do>​ start ... 
 +------------------->​change nohtie to 1 ,OK 
 +------------------->​change pureb to  0 ,OK 
 +wlan_confree_do>​ start ... 
 +ath_getchannels>​ nchan=50 
 +ath_getchannels>​ nchan=50 
 +ath_getchannels>​ nchan=50 match:9 
 +------------------->​change pureb to  0 ,OK 
 +wlan_confree_do>​ start ... 
 +------------------->​change pureg to 0 ,OK 
 +wlan_confree_do>​ start ... 
 +------------------->​change puren to 0 ,OK 
 +wlan_confree_do>​ start ... 
 +------------------->​set mcast rate to 22 ,OK 
 +wlan_confree_do>​ start ... 
 +------------------->​change cwmmode to 2 ,OK 
 +wlan_confree_do>​ start ... 
 +------------------->​change extoffset to -1 ,OK 
 +wlan_confree_do>​ start ... 
 +wlan_confree_do>​ start ... 
 +set amdulimit to 50000,OK! 
 +wlan_confree_do>​ start ... 
 +Set essid to WLAN-80B170 , OK! 
 +wlan_confree_do>​ start ... 
 +Set mode to Master , OK! 
 +wlan_confree_do>​ start ... 
 +now in ieee80211_ioctl_siwfreq 
 +Set channel to 9 , OK! 
 +wlan_confree_do>​ start ... 
 +Set country ie to 1 , OK! 
 +wlan_confree_do>​ start ... 
 +Set country ie to 0 , OK! 
 +wlan_confree_do>​ start ... 
 +Set tx_chainmask to 3 , OK! 
 +wlan_confree_do>​ start ... 
 +Set rx_chainmask to 3 , OK! 
 +wlan_confree_do>​ start ... 
 +set hide ssid = 0, OK 
 +init_lx_acl>​ 
 +init_lx_acl>​ acl=NULL 
 +wlan_confree_do>​ start ... 
 +open wds function , OK 
 +apAppInit : ifno:2 dev->​flags ​ 00000000 
 +[HWLAN]: dev->​open = 80195ca8, dev->​name = wlan0 
 +[HWLAN]: dev->​open = 8011db7c, dev->​name = wifi0 
 +ar5416CheckChan:​ channel 2412/​0x90080;​ HT configuration meet regulatory 
 +ar5416CheckChan:​ phy mode 0, ext offset 0 
 +ANI: capability: 9 
 +ar5416CheckChan:​ channel 2452/​0xf0080;​ HT configuration meet regulatory 
 +ar5416CheckChan:​ phy mode 1, ext offset -1 
 +ANI: capability: 9 
 +>>>>>>>>>>>>>>>>​ DECT Driver: dect_drv_open() Reset COSIC DECT again... 
 +>>>>>>>>>>>>>>>>>>>>>>>>>>>​SPI_access_wait set to on 
 +Wait VOIP_Init() finished...apAppInit : dev->​flags ​ 00001001 
 +Init_SSLServer>​ input listen_protocol=6,​ nListenPort=443 
 +[28] ssld_conf_init>​ ssl server info: 
 +[28] PrivateKey= 
 +[28] MyCertificate= 
 +[28] CaCertificate= 
 +[28] SSL_method=31 
 +[28] verify_mode=0 
 +[28] cipher_suites=ALL:​@STRENGTH:​!kEDH 
 +[28] tftp_server_ip=140.92.61.131 
 +[28] fn_myCerttificate=ServCert.pem 
 +[28] fn_privateKey=PrivKey.pem 
 +[28] fn_caCertificate=CaCert.pem 
 +[28] ssld_conf_init>​ ssl server info end: 
 +PKCS12_PBE_add>​ 
 +PKCS12_PBE_add>​ support RC4 
 +PKCS12_PBE_add>​ support DES 
 +PKCS12_PBE_add>​ support RC2 
 +[28] pCtx=0x81a40460 in ssld_conf_init 
 +ssld_ctx_reset_cert>​ this is pkcs12 type certificate 
 + 
 +[28] ssld_ctx_reset_cert : re-LoadServerCertAndKey() ok!! 
 + 
 +[28] ssld_ctx_reset_cert>​ re-LoadCACertificate( 1stCA ) ok!![28] ssld_conf_init>​ ssld_conf_init() ok 
 +[dhcp_clt] enable dhcp client in interface THS[14] 
 +[29] SSLClient>​ SSLClient() run 
 +[29] sslc_conf_init>​ ssl client info: 
 +[29] PrivateKey= 
 +[29] MyCertificate= 
 +[29] CaCertificate= 
 +[29] SSL_method=31 
 +[29] verify_mode=1 
 +[29] cipher_suites=ALL:​@STRENGTH:​!kEDH 
 +[29] tftp_server_ip=140.92.61.131 
 +[29] fn_myCerttificate=ServCert.pem 
 +[29] fn_privateKey=PrivKey.pem 
 +[29] fn_caCertificate=CaCert.pem 
 +[29] sslc_conf_init>​ ssl client info end: 
 +[29] sslc_conf_init>​ pCtx=0x81a2e9b4 in ssld_conf_init 
 + 
 +[29] sslc_ctx_reset_cert>​ re-LoadCACertificate( 3rdCA ) ok!! 
 +[29] sslc_ctx_reset_cert>​ re-LoadCACertificate( 2ndCA ) ok!! 
 +[29] sslc_ctx_reset_cert>​ re-LoadCACertificate( 1stCA ) ok!!sslc_ctx_reset_cert>​ this is pkcs12 type certificate 
 + 
 +[29] sslc_ctx_reset_cert : re-LoadServerCertAndKey() ok!! 
 +[29] sslc_conf_init>​ sslc_conf_init() ok 
 +[29] SSLClient>​ want to bind socket for client application! 
 +[USBLPT] Printer Initialize Fail : Plug Out !! 
 +padmin_task_entry() task running 
 + 
 +********** upnp_main() Unsupportted UPnP root device[0]: UPnP 
 + 
 +upnp_main(1-0) Run-up UPnP device IGD... 
 +********************************************* 
 +Wi-Fi Simple Config Application - Intel Corp. 
 +Version: Build 2.01.1.DTM1.1,​ Mar 10 2010 11:38:05 
 +********************************************* 
 +Initializing stack... 
 +---------in wsc init---------- 
 +----------sizeof(uint32)=4 
 +----------sizeof(uint-long)=4 
 +----------sizeof(uint32)=2 
 +WSC_WaitUserAction:​wait user action:0 
 +ScanMIH_task>​ DHCP ip give: 192.168.2.100 ~ 199, range: 100 
 +ptp Daemon task running 
 +USB: wrong number of companions (1 != 0) 
 +[USB] dwc3884_start() DWC3884 core version:​0x4F54220A,​ 2.20a 
 +[USB] dwc3884_reset() DANUBE_RCU_UBSCFG:​0xBF203018,​ var:​0x00000400 
 +[USB] dwc3884_reset() rstctl:​0xBE101010 
 +[USB] dwc3884_start() intsts:​0xBE101014,​ var:​0x04008829 
 +lpd Daemon task running 
 +[USB ROOTHUB_LOOP] RUNTASK id=39 lpd_main ... 
 +[USB] lpd_init() End. 
 +printer schedule task running 
 +upnp_Init(0) upnpGlobalInit[1]:​0 
 +SSDP Initialization completed... 
 +GenaInit : event_hook is NULL!! 
 +COSIC Not Ready..507 
 + 
 +>> Parse Service '​urn:​schemas-microsoft-com:​service:​OSInfo:​1'​ : TRUE 
 +>> Parse Service '​urn:​schemas-upnp-org:​service:​Layer3Forwarding:​1'​ : TRUE 
 +>>>>>>​ usbd_new_device:​ adding unit bus:1, addr=1, rev=0200, class=9, subclass=0, protocol=1, maxpacket=64,​ len=18, speed=3 
 +usbd_new_device() addr:1, vid:0x058b, pid:0xf001, devFlag:​0x0000 
 +usbd_probe_and_attach(Hub)>​ Reopen STATIC default pipe OK 
 + 
 +>> Parse Service '​urn:​schemas-upnp-org:​service:​WANCommonInterfaceConfig:​1'​ : TRUE 
 +>> Parse Service '​urn:​schemas-upnp-org:​service:​WANEthernetLinkConfig:​1'​ : TRUE 
 +>> Parse Service '​urn:​schemas-upnp-org:​service:​WANPPPConnection:​1'​ : TRUE 
 +>> Parse Service '​urn:​schemas-upnp-org:​service:​WANIPConnection:​1'​ : TRUE 
 +>> Parse Device '​urn:​schemas-upnp-org:​device:​WANConnectionDevice:​1'​ : TRUE 
 +>> Parse Device '​urn:​schemas-upnp-org:​device:​WANDevice:​1'​ : TRUE 
 +>> Parse Device '​urn:​schemas-upnp-org:​device:​InternetGatewayDevice:​1'​ : TRUE 
 +********** upnp_main1() Record pDevRoot[1]:​81a1479c 
 +>>>>>>>>>>​FRegisterDevice pDev->​rootDevHeadType = [0] 
 +>>>>>>>>>>​FRegisterDevice pDev->​rootDevHeadType = [0] 
 +>>>>>>>>>>​FRegisterDevice pDev->​rootDevHeadType = [0] 
 + 
 +>>>>​ UPNP init IGD device successfully ... 
 + 
 +upnp_main(2-0) Run-up UPnP device TR64... 
 +TR64DBUG::​UsrTR64Cfg_Init>​ mapping "​speedport.ip"​ to 192.168.2.1 
 +upnp_Init(0) upnpGlobalInit[2]:​0 
 + 
 +>> Parse Service '​urn:​dslforum-org:​service:​DeviceInfo:​1'​ : TRUE 
 +>> Parse Service '​urn:​dslforum-org:​service:​DeviceConfig:​1'​ : TRUE 
 +>> Parse Service '​urn:​dslforum-org:​service:​Layer3Forwarding:​1'​ : TRUE 
 +>> Parse Service '​urn:​dslforum-org:​service:​LANConfigSecurity:​1'​ : TRUE 
 +>> Parse Service '​urn:​dslforum-org:​service:​ManagementServer:​1'​ : TRUE 
 +>> Parse Service '​urn:​dslforum-org:​service:​Time:​1'​ : TRUE 
 +>> Parse Service '​urn:​dslforum-org:​service:​UserInterface:​1'​ : TRUE 
 +>> Parse Service '​urn:​dslforum-org:​service:​X_VoIP:​1'​ : TRUE 
 +>> Parse Service '​urn:​dslforum-org:​service:​LANHostConfigManagement:​1'​ : TRUE 
 +>> Parse Service '​urn:​dslforum-org:​service:​LANEthernetInterfaceConfig:​1'​ : TRUE 
 +>> Parse Service '​urn:​dslforum-org:​service:​WLANConfiguration:​1'​ : TRUE 
 +>> Parse Service '​urn:​dslforum-org:​service:​Hosts:​1'​ : TRUE 
 +>> Parse Device '​urn:​dslforum-org:​device:​LANDevice:​1'​ : TRUE 
 +>> Parse Service '​urn:​dslforum-org:​service:​WANCommonInterfaceConfig:​1'​ : TRUE 
 +>> Parse Service '​urn:​dslforum-org:​service:​WANDSLInterfaceConfig:​1'​ : TRUE 
 +>> Parse Service '​urn:​dslforum-org:​service:​WANEthernetInterfaceConfig:​1'​ : TRUE 
 +>> Parse Service '​urn:​dslforum-org:​service:​WANDSLConnectionManagement:​1'​ : TRUE 
 +>> Parse Service '​urn:​dslforum-org:​service:​WANDSLLinkConfig:​1'​ : TRUE 
 +>> Parse Service '​urn:​dslforum-org:​service:​WANEthernetLinkConfig:​1'​ : TRUE 
 +>> Parse Service '​urn:​dslforum-org:​service:​WANPPPConnection:​1'​ : TRUE 
 +>> Parse Device '​urn:​dslforum-org:​device:​WANConnectionDevice:​1'​ : TRUE 
 +>> Parse Device '​urn:​dslforum-org:​device:​WANDevice:​1'​ : TRUE 
 +>> Parse Device '​urn:​dslforum-org:​device:​InternetGatewayDevice:​1'​ : TRUE 
 +********** upnp_main1() Record pDevRoot[2]:​819e5960 
 +TR64DBUG::​TR64_UPnPInit>​ Start: 
 +TR64DBUG::​TR64_InitReqList>​ Start: 
 +TR64DBUG::​TR64_InitReqList>​ End. 
 +TR64::​TR64_UPnPInit>​ RUNTASK id=54 TR64_ProcessRequest... 
 +TR64DBUG::​TR64_UPnPInit>​ End. 
 +>>>>>>>>>>​FRegisterDevice pDev->​rootDevHeadType = [1] 
 +>>>>>>>>>>​FRegisterDevice pDev->​rootDevHeadType = [0] 
 +>>>>>>>>>>​FRegisterDevice pDev->​rootDevHeadType = [0] 
 +>>>>>>>>>>​FRegisterDevice pDev->​rootDevHeadType = [0] 
 + 
 +>>>>​ UPNP init TR64 device successfully ... 
 + 
 + 
 +********** upnp_main() Unsupportted UPnP root device[3]: WPS-WCN 
 + 
 +upnp_main(4-0) Run-up UPnP device AV Media Server... 
 +usbd_probe_and_attach,​probe 1! 
 +startExplore() usb explore task run-up, slot:0, tsk_id:56, reason:0 
 +usb_hc_install_interrupt() Install OTG interrupt 54 
 +USB Module: Version 2.0.0 build Mar 10 2010 11:33:30 
 +usb_explore_task() Begin ... 
 +COSIC Not Ready..1000 
 +DECT Driver started,​UPLANE defined 
 + 
 +.[signal_1x_reset] ... 
 +ifx_sscAllocConnection:​ device dect_drv register sucessfully! 
 +start_kthread TASK success: PID 55 Name waitTAPI thread 
 +ReleaseWDS_ni : cnt 0 
 +wlan_confree_do>​ start ... 
 +now in ieee80211_ioctl_siwfreq 
 +Set channel to 0 , OK! 
 +ap_deauth_sta called ??? 
 +wlan_confree_do>​ start ... 
 +wlan_confree_do>​ start ... 
 +wlan_confree_do>​ start ... 
 +wlan_confree_do>​ start ... 
 +wlan_confree_do>​ start ... 
 +wlan_confree_do>​ start ... 
 +wlan_confree_do>​ start ... 
 +[HWLAN]: dev->​open = 80195ca8, dev->​name = wlan0 
 +[HWLAN]: dev->​open = 8011db7c, dev->​name = wifi0 
 +ar5416CheckChan:​ channel 2452/​0xf0080;​ HT configuration meet regulatory 
 +ar5416CheckChan:​ phy mode 1, ext offset -1 
 +ANI: capability: 9 
 +start_kthread TASK success: PID 19 Name CosicDriver 
 +Initializing DECT Agent..... 
 +TEL_PORT_SetPhoneChannelId phoneIdx 1 channelId 255 
 +TEL_PORT_SetPhoneChannelId phoneIdx 2 channelId 255 
 +TEL_PORT_SetPhoneChannelId phoneIdx 3 channelId 255 
 +TEL_PORT_SetPhoneChannelId phoneIdx 4 channelId 255 
 +TEL_PORT_SetPhoneChannelId phoneIdx 5 channelId 255 
 +TEL_PORT_SetPhoneChannelId phoneIdx 6 channelId 255 
 +TEL_PORT_SetPhoneChannelId phoneIdx 7 channelId 255 
 +TEL_PORT_SetPhoneChannelId phoneIdx 8 channelId 255 
 +Initializing DECT Endpoint 0 
 +!! This Endpoint Is Not Registered !! 0 
 +Initializing DECT Endpoint 1 
 +!! This Endpoint Is Not Registered !! 1 
 +Initializing DECT Endpoint 2 
 +!! This Endpoint Is Not Registered !! 2 
 +Initializing DECT Endpoint 3 
 +!! This Endpoint Is Not Registered !! 3 
 +Initializing DECT Endpoint 4 
 +!! This Endpoint Is Not Registered !! 4 
 +Initializing DECT Endpoint 5 
 +!! This Endpoint Is Not Registered !! 5 
 +<DECT_TK IFX_DECT_MU_RegisterCallBks >​Callbacks of MU module registerd 
 +ar5416CheckChan:​ channel 2412/​0x90080;​ HT configuration meet regulatory 
 +ar5416CheckChan:​ phy mode 0, ext offset 0 
 +ANI: capability: 9 
 +<DECT_TK IFX_DECT_CSU_RegisterCallBks >Enter Register CallBacks. 
 +<DECT_TK IFX_DECT_DPSU_RegisterDataApp ><API RegisterCallBks>​Entry. 
 +<DECT_TK IFX_DECT_DPSU_GetFreeSessionIndex ><API GetFreeSessionIndex>​Successful. 
 +<DECT_TK IFX_DECT_DPSU_ValidateProtoID > <API ValidateProtoID>​Entry. 
 +<DECT_TK IFX_DECT_DPSU_ValidateProtoID > <API ValidateProtoID>​Successful. 
 +<DECT_TK IFX_DECT_USU_RegisterCallBks ><​RegisterCallBks>​Entry. 
 +<DECT_TK IFX_DECT_USU_RegisterCallBks ><​RegisterCallBks>​Successful.CallBacks Registered. 
 +[45] Allocate mailbox 8 
 +IFX_DECT_LAS_Init:​ Create task 44 for sending packets 
 +[45] Allocate mailbox 9 
 +Initializing DECT STACK..... 
 +Task IFX_DECT_MsgRouterFdTask id 57 
 +Get Dect PIN fm gSetting (0000) 
 +RFPI value 01 7c b5 90 c0 
 +>>>>>>>>>>>>>>​PINCODE : (0000) g_ucOscTrimValHigh 0 g_ucOscTrimValLOW f1 
 +>>>>>>>>>>>>>>​BMC : xInitCfg.xBMCPrams.ucRSSIFreeLevel 7  
 +xInitCfg.xBMCPrams.ucRSSIBusyLevel e  
 +xInitCfg.xBMCPrams.ucBearerChgLim f  
 +xInitCfg.xBMCPrams.ucDelayReg 0  
 +xInitCfg.xBMCPrams.ucDefaultAntenna 81  
 +xInitCfg.xBMCPrams.ucDRONCtrlReg 1  
 +xInitCfg.xBMCPrams.ucDSPFrameReset 0  
 +xInitCfg.xBMCPrams.ucModeCtrlReg2 0  
 +xInitCfg.xBMCPrams.ucClkRecovery 0  
 +xInitCfg.xBMCPrams.ucWOPNSF 20  
 +xInitCfg.xBMCPrams.ucWWSF 8  
 +xInitCfg.xBMCPrams.ucCRRStart 13  
 +xInitCfg.xBMCPrams.ucCRREnd ff  
 +xInitCfg.xBMCPrams.ucPLLSettleTime 8f  
 +xInitCfg.xBMCPrams.ucGaussianEnable 0  
 +xInitCfg.xBMCPrams.ucRXDSGDeact 0  
 +xInitCfg.xBMCPrams.ucGenModeCtrl2 4  
 +xInitCfg.xBMCPrams.ucHandOverEvalper a4  
 +xInitCfg.xBMCPrams.ucGENMUTCTRL0 0  
 +xInitCfg.xBMCPrams.ucGENMUTCTRL1 0  
 +xInitCfg.xBMCPrams.ucEXTMUTCTRL0 89  
 +xInitCfg.xOscTrimVal.ucOscTrimValHI 0  
 +xInitCfg.xOscTrimVal.ucOscTrimValLOW f1  
 +xInitCfg.xOscTrimVal.aucCheckSum[0] 0  
 +xInitCfg.xOscTrimVal.aucCheckSum[1] 0  
 +xInitCfg.unGaussianVal af  
 +Before call DECT IFX_DECT_Async_Init .tick.1384 
 +Calling in Async mode  
 +the Size of Global info is 30408 bytes 
 +The size of stackCfg is 332 bytes 
 +The size of CSUInfo is 3744 bytes 
 +The size of MUInfo is 336 bytes 
 +The size of SMSInfo is 7320 bytes 
 +The size of ESUInfo is 72 bytes 
 +The size of DPSUInfo is 24688 bytes 
 +The size of LAU is 72 bytes 
 + 
 +The PIN CODE is 0000 
 +U:​IFX_DECT_StackEntry:​  
 +rfpi_ptr[1 124 181 144 192] 
 +U:​IFX_DECT_StackEntry:​  
 +GFSK_Value=175 
 +U:​IFX_DECT_StackEntry:​  
 +Osc_Trim_L.=0 Osc_Trim_L=241 
 +U:​IFX_DECT_StackEntry:​  
 +ucRSSIFreeLevel=7 ucRSSIBusyLevel=14 ucBearerChgLim=15 
 +ucDelayReg=0 ucDefaultAntenna=129 ucDRONCtrlReg=1 
 +ucDSPFrameReset=0 ucModeCtrlReg2=0 ucClkRecovery=0 
 +ucWOPNSF=32 ucWWSF=8 ucCRRStart=19 
 +ucCRREnd=255 ucPLLSettleTime=143 ucGaussianEnable=0 
 +ucRXDSGDeact=0 ucGenModeCtrl2=4 ucHandOverEvalper=164 
 +ucGENMUTCTRL0=0 ucGENMUTCTRL1=0 ucEXTMUTCTRL0=137 
 +[45] Allocate mailbox 10 
 +<​DECT-STACK>​The number of Subscribers are 0 
 +The BMC Location is 808115bc and size is 12288 
 +The USR SW Location is 808067d4 and size is 44517 
 +<DECT_TK IFX_DECT_USU_ModemFirmwareDownload ><​IFX_DECT_USU_ModemFirmwareDownload>​ Entry 
 +The BMC Location is 808115bc and size is 12288 
 +The UsrSoftware Location is 808067d4 and size is 44517 
 +DOWNLOADING COSIC FIRMWARE 
 +ar5416CheckChan:​ channel 2417/​0x90080;​ HT configuration meet regulatory 
 +ar5416CheckChan:​ phy mode 0, ext offset 0 
 +ANI: capability: 9 
 +DECT Stack Initialized.......1492 
 +DECT Agent Initialized 
 + ​VOICE_DRV_Init 
 +Reset Duslic High begin 
 +COSIC Not Ready..1502 
 +Reset Duslic end 
 +IFX TAPI, version 3.7.1.5, (c) 2001-2008 Infineon Technologies AG 
 + 
 +[59] Allocate mailbox 11 
 +TAPI_init_task_queue:​ enter loop..11 
 +[45] Allocate mailbox 12 
 +[45] Allocate mailbox 13 
 +[45] Allocate mailbox 14 
 +[45] Allocate mailbox 15 
 +[45] Allocate mailbox 16 
 +[45] Allocate mailbox 17 
 +[45] Allocate mailbox 18 
 +[45] Allocate mailbox 19 
 +[45] Allocate mailbox 20 
 +[45] Allocate mailbox 21 
 +[45] Allocate mailbox 22 
 +[45] Allocate mailbox 23 
 +[45] Allocate mailbox 24 
 +[45] Allocate mailbox 25 
 +[45] Allocate mailbox 26 
 +[45] Allocate mailbox 27 
 +[45] Allocate resource 109, FreeResource = 2 
 +start_kthread TASK success: PID 60 Name kpi_in 
 +[45] Allocate resource 110, FreeResource = 3 
 +IFX VMMC device driver, version 1.3.0.5, (c) 2006-2008 Infineon Technologies AG 
 + 
 +IFX MIPS24KEc MPS driver, version 2.0.0.0, (c) 2006-2008 Infineon Technologies AG 
 +request_timer(3,​ 0x000001BE, 1) 
 +ifx_mps_init_structures request_irq 1 146 
 +ifx_mps_init_structures request_irq 2 147 
 +ifx_mps_init_structures request_irq 3 0 142 
 +ifx_mps_init_structures request_irq 3 1 143 
 +ifx_mps_init_structures request_irq 3 2 144 
 +ifx_mps_init_structures request_irq 3 3 145 
 +VMMC_Open : Major 122 Minor 10  
 +IFX_TAPI_Create_Device:​ ndev = 0, TapiDev 819C8EB4 
 +[45] Allocate resource 111, FreeResource = 4 
 +IFX_DECT_MsgRouterFdTask enter while Loop  
 +[45] Allocate resource 112, FreeResource = 5 
 +[45] Allocate resource 113, FreeResource = 6 
 +[45] Allocate resource 114, FreeResource = 7 
 +[45] Allocate resource 115, FreeResource = 8 
 +>>>>>>>>>>>>>>>>>>>>>>>>>​ OS_GetEventNumber event number 1  
 +ifx_tapi_Prepare_Ch:​ nChannel 0 
 +[45] Allocate resource 116, FreeResource = 9 
 +[45] Allocate resource 117, FreeResource = 10 
 +[45] Allocate resource 118, FreeResource = 11 
 +[45] Allocate resource 119, FreeResource = 12 
 +>>>>>>>>>>>>>>>>>>>>>>>>>​ OS_GetEventNumber event number 2  
 +ifx_tapi_Prepare_Ch:​ nChannel 1 
 +[45] Allocate resource 120, FreeResource = 13 
 +[45] Allocate resource 121, FreeResource = 14 
 +[45] Allocate resource 122, FreeResource = 15 
 +[45] Allocate resource 123, FreeResource = 16 
 +>>>>>>>>>>>>>>>>>>>>>>>>>​ OS_GetEventNumber event number 3  
 +ifx_tapi_Prepare_Ch:​ nChannel 2 
 +[45] Allocate resource 124, FreeResource = 17 
 +[45] Allocate resource 125, FreeResource = 18 
 +[45] Allocate resource 126, FreeResource = 19 
 +[45] Allocate resource 127, FreeResource = 20 
 +>>>>>>>>>>>>>>>>>>>>>>>>>​ OS_GetEventNumber event number 4  
 +ifx_tapi_Prepare_Ch:​ nChannel 3 
 +[45] Allocate resource 128, FreeResource = 21 
 +[45] Allocate resource 129, FreeResource = 22 
 +[45] Allocate resource 130, FreeResource = 23 
 +[45] Allocate resource 131, FreeResource = 24 
 +>>>>>>>>>>>>>>>>>>>>>>>>>​ OS_GetEventNumber event number 5  
 +ifx_tapi_Prepare_Ch:​ nChannel 4 
 +[45] Allocate resource 132, FreeResource = 25 
 +[45] Allocate resource 133, FreeResource = 26 
 +[45] Allocate resource 134, FreeResource = 27 
 +[45] Allocate resource 135, FreeResource = 28 
 +>>>>>>>>>>>>>>>>>>>>>>>>>​ OS_GetEventNumber event number 6  
 +ifx_tapi_Prepare_Ch:​ nChannel 5 
 +[45] Allocate resource 136, FreeResource = 29 
 +[45] Allocate resource 137, FreeResource = 30 
 +[45] Allocate resource 138, FreeResource = 31 
 +[45] Allocate resource 139, FreeResource = 32 
 +ar5416CheckChan:​ channel 2422/​0xb0080;​ HT configuration meet regulatory 
 +ar5416CheckChan:​ phy mode 0, ext offset 0 
 +ANI: capability: 9 
 +>>>>>>>>>>>>>>>>>>>>>>>>>​ OS_GetEventNumber event number 7  
 +ifx_tapi_Prepare_Ch:​ nChannel 6 
 +[45] Allocate resource 140, FreeResource = 33 
 +[45] Allocate resource 141, FreeResource = 34 
 +[45] Allocate resource 142, FreeResource = 35 
 +[45] Allocate resource 143, FreeResource = 36 
 +>>>>>>>>>>>>>>>>>>>>>>>>>​ OS_GetEventNumber event number 8  
 +ifx_tapi_Prepare_Ch:​ nChannel 7 
 +[45] Allocate resource 144, FreeResource = 37 
 +[45] Allocate resource 145, FreeResource = 38 
 +[45] Allocate resource 146, FreeResource = 39 
 +[45] Allocate resource 147, FreeResource = 40 
 +>>>>>>>>>>>>>>>>>>>>>>>>>​ OS_GetEventNumber event number 9  
 +VMMC_LL_Open,​ nDev 0, inode 0 mpsCh 1 
 +ifx_mps_open,​ inode 1 
 +VMMC_Open --> 819c8eb4 
 +VMMC_handle[0] : 819c8eb4 
 +VMMC_Open : Major 122 Minor 11  
 +VMMC_LL_Open,​ nDev 0, inode 1 mpsCh 2 
 +ifx_mps_open,​ inode 2 
 +VMMC_Open --> 819c6ac4 
 +VMMC_handle[1] : 819c6ac4 
 +VMMC_Open : Major 122 Minor 12  
 +VMMC_LL_Open,​ nDev 0, inode 2 mpsCh 3 
 +ifx_mps_open,​ inode 3 
 +VMMC_Open --> 819c6f40 
 +VMMC_handle[2] : 819c6f40 
 +VMMC_Open : Major 122 Minor 13  
 +VMMC_LL_Open,​ nDev 0, inode 3 mpsCh 4 
 +ifx_mps_open,​ inode 4 
 +VMMC_Open --> 819c73bc 
 +VMMC_handle[3] : 819c73bc 
 +VMMC_Open : Major 122 Minor 14  
 +VMMC_LL_Open,​ nDev 0, inode 4 mpsCh 5 
 +ifx_mps_open,​ inode 5 
 +VMMC_Open --> 819c7838 
 +VMMC_handle[4] : 819c7838 
 +VMMC_Open : Major 122 Minor 15  
 +VMMC_LL_Open,​ nDev 0, inode 5 mpsCh 6 
 +ifx_mps_open,​ inode 6 
 +VMMC_Open --> 819c7cb4 
 +VMMC_handle[5] : 819c7cb4 
 +VMMC_Open : Major 122 Minor 16  
 +VMMC_LL_Open,​ nDev 0, inode 6 mpsCh 7 
 +ifx_mps_open,​ inode 7 
 +VMMC_Open --> 819c8130 
 +VMMC_handle[6] : 819c8130 
 +VMMC_Open : Major 122 Minor 17  
 +VMMC_LL_Open,​ nDev 0, inode 7 mpsCh 8 
 +VMMC_Open --> 819c85ac 
 +VMMC_handle[7] : 819c85ac 
 +VMMC_Open : Major 122 Minor 18  
 +VMMC_LL_Open,​ nDev 0, inode 8 mpsCh 9 
 +VMMC_Open --> 819c8a28 
 +VMMC_handle[8] : 819c8a28 
 +===>  
 +Set PCM I/F 0 VMMC_handle:​819c8eb4 
 +ifx_mps_ioctl:​ FIO_MPS_DOWNLOAD...1 
 +Unzipping from B0692000 to 830661E4 ... [ZIP 1] [ZIP 1 a75cb796] COSIC Not Ready..2012 
 +ar5416CheckChan:​ channel 2427/​0xb0080;​ HT configuration meet regulatory 
 +ar5416CheckChan:​ phy mode 0, ext offset 0 
 +ANI: capability: 9 
 +done 
 +Uncompressed size = 642816 
 +IFX_MPS: Download firmware (size 642816 bytes)... .ActualUIThreadProc:​ wait q 
 +upnp_Init(0) upnpGlobalInit[4]:​0 
 + 
 +>> Parse Service '​urn:​schemas-upnp-org:​service:​ConnectionManager:​1'​ : TRUE 
 +>> Parse Service '​urn:​schemas-upnp-org:​service:​ContentDirectory:​1'​ : TRUE 
 +>> Parse Service '​urn:​microsoft.com:​service:​X_MS_MediaReceiverRegistrar:​1'​ : TRUE 
 +>> Parse Device '​urn:​schemas-upnp-org:​device:​MediaServer:​1'​ : TRUE 
 +********** upnp_main1() Record pDevRoot[4]:​819a989c 
 +>>>>>>>>>>​FRegisterDevice pDev->​rootDevHeadType = [0] 
 +QueryCurrentConnectionIDs.... 
 + 
 +>>>>​ UPNP init AV Media Server device successfully ... 
 + 
 + 
 +********** upnp_main() Unsupportted UPnP root device[5]: AV Media Renderer 
 + 
 + 
 +********** upnp_main() Unsupportted UPnP root device[6]: Printer 
 + 
 +ok! 
 +Version 11.0.0.1.0 up and running... 
 +ar5416CheckChan:​ channel 2432/​0xf0080;​ HT configuration meet regulatory 
 +ar5416CheckChan:​ phy mode 0, ext offset 0 
 +ANI: capability: 9 
 +COSIC Not Ready..2500 
 +ar5416CheckChan:​ channel 2437/​0xf0080;​ HT configuration meet regulatory 
 +ar5416CheckChan:​ phy mode 0, ext offset 0 
 +ANI: capability: 9 
 +ar5416CheckChan:​ channel 2442/​0xf0080;​ HT configuration meet regulatory 
 +ar5416CheckChan:​ phy mode 0, ext offset 0 
 +ANI: capability: 9 
 +COSIC Not Ready..3000 
 +.ar5416CheckChan:​ channel 2447/​0xf0080;​ HT configuration meet regulatory 
 +ar5416CheckChan:​ phy mode 0, ext offset 0 
 +ANI: capability: 9 
 +!!!!Timed Out Sending Frame Again no response from Modem!!!!! 
 +!!!!Timed Out Sending Frame Again no response from Modem!!!!! 
 +COSIC Not Ready..3502 
 +ar5416CheckChan:​ channel 2452/​0xf0080;​ HT configuration meet regulatory 
 +ar5416CheckChan:​ phy mode 0, ext offset 0 
 +ANI: capability: 9 
 +ar5416CheckChan:​ channel 2457/​0x70080;​ HT configuration meet regulatory 
 +ar5416CheckChan:​ phy mode 0, ext offset 0 
 +ANI: capability: 9 
 +COSIC Not Ready..4000 
 +.******************uuid_p:​00000000-0000-0003000088252c80b156***** 
 +mp_deviceInfo->​uuid[i]:​ 
 +0-0-0-0-0-0-0-3-0-0-88-25-2c-80-b1-56- 
 +mp_deviceInfo->​macAddr:​88:​25:​2C:​80:​B1:​56 
 +gSetting.dot1x.if_entry[0].enableWEP:​0 
 +authTypeFlags is 20 ,​encrTypeFlags is 8 ,m_nwKey is 7904953540194866,​ key len is 10 
 + ssid is WLAN-80B170 
 +ar5416CheckChan:​ channel 2462/​0x70080;​ HT configuration meet regulatory 
 +ar5416CheckChan:​ phy mode 0, ext offset 0 
 +ANI: capability: 9 
 +ar5416CheckChan:​ channel 2467/​0x50080;​ HT configuration meet regulatory 
 +ar5416CheckChan:​ phy mode 0, ext offset 0 
 +ANI: capability: 9 
 +COSIC Not Ready..4500 
 +ar5416CheckChan:​ channel 2472/​0x50080;​ HT configuration meet regulatory 
 +ar5416CheckChan:​ phy mode 0, ext offset 0 
 +ANI: capability: 9 
 +COSIC Not Ready..5000 
 +ar5416CheckChan:​ channel 2452/​0xf0080;​ HT configuration meet regulatory 
 +ar5416CheckChan:​ phy mode 0, ext offset 0 
 +ANI: capability: 9 
 +ar5416CheckChan:​ channel 2412/​0x90080;​ HT configuration meet regulatory 
 +ar5416CheckChan:​ phy mode 1, ext offset 1 
 +ANI: capability: 9 
 +>>>>>>>>>>>>>>>>>>>>>>>>>​ OS_GetEventNumber event number 10  
 +>>>>>>>>>>>>>>>>>>>>>>>>>​ OS_GetEventNumber event number 11  
 +===>  
 + ​VMMC_Ioctl:​ Phone 1 IFX_TAPI_LINE_TYPE ok! 
 + ​VMMC_Ioctl:​ Phone 1 IFXPHONE_SET_LINEFEED ok! 
 +Set PCM I/F 1 VMMC_handle:​819c6ac4 
 +===>  
 + ​VMMC_Ioctl:​ Phone 2 IFX_TAPI_LINE_TYPE ok! 
 + ​VMMC_Ioctl:​ Phone 2 IFXPHONE_SET_LINEFEED ok! 
 +Set PCM I/F 2 VMMC_handle:​819c6f40 
 +===>  
 +Set PCM I/F 3 VMMC_handle:​819c73bc 
 +===>  
 +Set PCM I/F 4 VMMC_handle:​819c7838 
 +===>  
 +Set PCM I/F 5 VMMC_handle:​819c7cb4 
 +===>  
 +Set PCM I/F 6 VMMC_handle:​819c8130 
 +===>  
 +Set PCM I/F 7 VMMC_handle:​819c85ac 
 +===>  
 +Set PCM I/F 8 VMMC_handle:​819c8a28 
 +CheckWidebandCodec:​ 255 3 
 +CheckWidebandCodec:​ 255 3 
 +CheckWidebandCodec:​ 255 3 
 +.CheckWidebandCodec:​ 255 3 
 +CheckWidebandCodec:​ 255 3 
 +Setting HOOK Related Parameters 0 
 +Setting HOOKFLASH_TIME min 70 ms max 320 ms 
 +Setting HOOKON_TIME min 320 max 320 
 +Setting HOOK Related Parameters 1 
 +Setting HOOKFLASH_TIME min 70 ms max 320 ms 
 +Setting HOOKON_TIME min 320 max 320 
 +Setting HOOK Related Parameters 2 
 +Setting HOOK Related Parameters 3 
 +RUNTASK id=32 VINETIC_DRV_Task... 
 +[65] Allocate mailbox 28 
 +RUNTASK id=65 VINETIC_T38_Task... 
 +RUNTASK id=67 FXO_flash_task... 
 +RUNTASK id=66 VOICE_API_task... 
 +COSIC Not Ready..5500 
 +!!!!Timed Out Sending Frame Again no response from Modem!!!!! 
 +COSIC Not Ready..6000 
 +.Reset Duslic High begin 
 +Reset Duslic end 
 +ProDAAInitialize:​ begin now 
 +ProDAAInitialize:​ Line-Side Device Status ff 
 +Port 2 sytem-side revision ff, line-side revision 3 
 +init_DTMF_data:​ time 6316 
 +force_daa_offhook ch 2 onoff 1 time 6316 
 +ProDaaOffhook 5 2 onoff 1 
 +CID_Detect CH 2 onoff 0 
 +FXO_PolState_DTMFCID --> Disable DTMF CID 
 +wlan_confree_do>​ start ... 
 +mp_deviceInfo->​authTypeFlags:​32 
 +mp_deviceInfo->​encrTypeFlags:​8 
 +*******build M1 start********** 
 +*******build M1 end********** 
 +---test--sizeof(WSC_NOTIFY_DATA) = 36 
 +exit StartMonitor TRANSPORT_TYPE_UPNP_DEV 
 +exit switch_mode 
 +exit wscmain 
 + 
 +******* MODE: AP with built-in Registrar and UPnP Proxy ******* 
 +*******p_header->​eType:​5 
 +LCB_MENU_AP_PROXY_REGISTRAR 
 +**************b_tryAgain:​1 
 + 
 +Options: 
 +0. Quit 
 +1. Configure Client 
 +2. Configure Client via push-button 
 +Enter selection: force_daa_offhook ch 2 onoff 0 time 6386 
 +ProDaaOffhook 5 2 onoff 0 
 +CID_Detect CH 2 onoff 1 
 +FXO_PolState_DTMFCID --> Detect Polarity Changed Enable DTMF CID 
 +COSIC Not Ready..6500 
 +COSIC Not Ready..7000 
 +COSIC Not Ready..7500 
 +COSIC Not Ready..8000 
 +COSIC Not Ready..8500 
 +COSIC Not Ready..9000 
 +COSIC Not Ready..9520 
 +COSIC Not Ready..10000 
 +COSIC Not Ready..10500 
 +COSIC Not Ready..11000 
 +COSIC Not Ready..11500 
 +COSIC Not Ready..12000 
 +COSIC Not Ready..12500 
 +COSIC Not Ready..13000 
 +COSIC Not Ready..13500 
 +COSIC Not Ready..14000 
 +COSIC Not Ready..14500 
 +COSIC Not Ready..15000 
 +COSIC Not Ready..15500 
 +COSIC Not Ready..16000 
 +COSIC Not Ready..16500 
 +COSIC Not Ready..17000 
 +COSIC Not Ready..17500 
 +COSIC Not Ready..18000 
 +COSIC Not Ready..18500 
 +cCOSIC Not Ready..19000 
 +COSIC Not Ready..19500 
 +Turn off COSIC function now...25500 
 +</​code>​ 
 +</​p>​ 
 +</​HTML>​
  
 ===== Tags ===== ===== Tags =====
-{{tag>ADSL2plus}}+{{tag>FastEthernet 1NIC 1WNIC 4Port ath9k 64RAM 8Flash MIPS MIPS32 24KEc 802.11abgn Serial ADSL2+ lantiq danube fxo brnboot}}
toh/t-com/spw504v.1347987049.txt.bz2 · Last modified: 2012/09/18 18:50 (external edit)