T-Home Speedport W 700V

The T-Home Speedport W 700V is an IAD sold by Deutsche Telekom with an ADSL2+ Annex B Modem, 802.11bg Wifi and two FXS ports as well as a S0 bus connector.
The device is manufactured by Arcadyan for Siemens and they resell it to Deutsche Telekom.


Under Construction!
This page is currently under construction. You can edit the article to help completing it.


There is a product recall for the power supply of the Speedport W 700V. If you're affected, Deutsche Telekom exchanges it free of charge.
This device is not supported yet.

Supported Versions

Version/Model Launch Date S/N OpenWrt Version Supported Model Specific Notes
UO - - - Flash: EON EN29LV320B
U5 - - - -
v1 - - - Flash: MXIC MX29LV320ABTC

OEM source code is not available.

Hardware Highlights

SoC Ram Flash Network USB Serial JTag
Infineon PSB50505 v1.3 @235MHz 32MiB 4MiB 4 x 1 No Yes ?

Manufacturer's site: Speedport W 700V
User manual (in German): Bedienungsanleitung

Installation

This device is not supported yet.

Flash Layout

This is the default flash layout as reported by the bootloader:

---------------------------------------
    Area            Address      Length 
--------------------------------------- 
[0] Boot            0xB3000000     128K
[1] Configuration   0xB3020000     192K
[2] Image 0         0xB3050000    1856K
[3] Image 1         0xB3220000    1856K
[4] Boot Params     0xB33F0000      64K
[5] Flash Image     0xB3000000    4096K
---------------------------------------

Please note that area/partition "[5] Flash Image" is the complete flash, so do never try to erase or reflash this area. Also don't mess with areas 0, 1 and 4 as you might brick your device.

Flash custom firmware

brnboot
Start your serial terminal, press the space bar 3 times (as soon as the device is powered on) to access the bootloader. Press return to see help menu. Press "!" to access the hidden administrator mode with extended options. Press "k" to run the minikernel, which will run a webserver on 192.168.2.1:80 with recovery options.

Buttons

hardware.button on howto use and configure the hardware button(s).

Hardware

Info

Instruction set: MIPS
Vendor: Lantiq
Bootloader: brnboot
System-On-Chip: Infineon Amazon-ME PSB50505 v1.3
CPU @Frq MIPS 4KEc @235MHz
Flash size: 4 MiB
Flash Chip: EON EN29LV320B or MXIC MX29LV320ABTC
RAM size: 32 MiB
RAM Chip: 2x ISSI IS42S16800A-7TL
Wireless Atheros AR2413/5112/5212
Switch: Infineon ADM6996I
Modem: ADSL2+
USB: No
Serial: Yes
JTAG: ?

Photos

Model Number

Front:

Photo of front of the casing, coming soon

Back:

Photo of back of the casing, coming soon

Opening the case

Note: This will void your warranty!
There are four clearly visible screws on the backside of the device. Once they are removed, the two halves of the case can be taken apart easily.

Main PCB:

Wireless Chipset (underneath the shielding):

speedport_w700v_wireless_chipset.jpg

Serial

port.serial general information about the serial port, serial port cable, etc.

J15 is located next to the ethernet switch. Pin 1 is marked by an arrow.

- 1 2 -
RX 3 4 -
TX 5 6 -
- 7 8 -
GND 9 10 3.3V

speedport_w700v_serial_pinout.jpg

115200 baud, 8N1

See also: http://www.kessler-design.com/speedport-w700v/hardware.html

Debricking

generic.debrick
See also: W700V kein Bootlaoder mehr? (in German)

Bootlogs

OEM bootlog

Version 1.0.1 Read EEPROM Jump to Flash ======================================================================= Wireless ADSL Gateway AMAZON Loader V0.93.0 build Nov 10 2006 17:16:22 Broad Net Technology, INC. ======================================================================= EON EN29LV320B bottom boot 16-bit mode found [GPIO FLOW] SetGpio() Begin .. [GPIO FLOW] SetGpio() End. Copying boot params.....DONE Press Space Bar 3 times to enter command mode ... Flash Checking [1] Passed. Unzipping firmware [1(3)] at 0x80002000 ... [ZIP 1] done In c_entry() function ... CPU : Yangtse Version Chip V1.3, CPU Speed 235 MHz, FPI Speed 117 MHz install_exception [INIT] Interrupt ... [GPIO FLOW] SetGpio() Begin .. [GPIO FLOW] SetGpio() End. [INIT] System Log Pool startup ... [INIT] MTinitialize .. [INIT] usrclk mips_counter_frequency:117500000 r4k_offset: 0001cafc(117500) init_US_counter : time1 = 183585 , time2 = 32183613, diff 32000028 US_counter = 59 cnt1 32694569 cnt2 32695803, diff 1234 Runtime code version: 1.22.000 System startup... [INIT] Memory COLOR 0, 1500000 bytes .. [INIT] Memory COLOR 1, 1048576 bytes .. [INIT] Memory COLOR 2, 3227776 bytes .. InitCommSys: RESOURCE_BASE = 27, NUMRES = 640 InitCommSys: EVENT_BASE = 131, NUMEVT = 768 InitCommSys: MAILBOX_BASE = 6, NUMMBX = 64 EON EN29LV320B bottom boot 16-bit mode found Set flash memory layout to Boot Parameters found !!! Bootcode version: V0.93.0 Serial number: J634513733 Hardware version: 01B sizeof(struct III_Config_t) is 186032 EON EN29LV320B bottom boot 16-bit mode found ====xxx==============================-->425@-230;*(.4/.4/1,.4/3/1) -->425@-230;30(.1/.25/1,.1/3/1) -->600(.9/4.8) -->600(.3/.5,.3/3) -->600(.9/3.9) GPIO15 = 1 check_WAN_switch returns 1 GPIO15 = 1 Enable interface 26 default route: 0.0.0.0 BufferInit: BUF_HDR_SZ=64 BUF_ALIGN_SZ=12 BUFFER_OFFSET=128 BUF_BUFSZ0=384 BUF_BUFSZ1=2176 NUM_OF_B0=0 NUM_OF_B1=1000 BUF_POOL0_SZ=0 BUF_POOL1_SZ=2240000 sizeof(BUFFER0)=448,sizeof(BUFFER1)=2240 *BUF0=0x80ea8bec *BUF1=0x80c85ddc Altgn *BUF0=0x80ea8bf0 *BUF1=0x80c85de0 End at BUF0:0x80ea8bf0, BUF1:0x80ea8be0 BUF0[0]=0x80ea8bf0 BUF1[0]=0x80c85de0 buffer0 pointer init OK! buffer1 pointer init OK! [qm_lnk_init] CLOCKHZ=1000 ... [qm_cbq_enable] no QM attached [qm_cbq_detach] no QM is attached at link 0 f=4214967298/100000, ns_per_byte=1086556160/100000 New cls: id=0, bw=799 ns/byte, maxd=0 ms, maxb=32, minb=2, avgpktsz=250, maxpktsz=1604, offtime=362, parent=0, borrow=0 pri=0, maxidle=113, minidle=-2566, maxq=96, clsfg=17 f=3896529814/100000, ns_per_byte=1079574528/100000 New cls: id=1, bw=79999 ns/byte, maxd=0 ms, maxb=16, minb=1, avgpktsz=1604, maxpktsz=1604, offtime=128191, parent=812aa578, borrow=812aa578 pri=7, maxidle=34157, minidle=-256639, maxq=48, clsfg=21 qm_cbq_attach(): cbqp->cbq_res=22 f=1157355966/100000, ns_per_byte=1086543359/100000 New cls: id=2, bw=808 ns/byte, maxd=0 ms, maxb=32, minb=4, avgpktsz=250, maxpktsz=1604, offtime=745, parent=812aa578, borrow=812aa578 pri=0, maxidle=114, minidle=-2592, maxq=96, clsfg=21 f=3892314111/100000, ns_per_byte=1072693248/100000 [qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT overflow New cls: id=3, bw=1338830 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=250, maxpktsz=1604, offtime=1370962, parent=812a8f78, borrow=812a8f78 pri=0, maxidle=0, minidle=-4294966, maxq=96, clsfg=21 f=3892314111/100000, ns_per_byte=1072693248/100000 [qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT overflow New cls: id=4, bw=1338830 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=250, maxpktsz=1604, offtime=1370962, parent=812a8f78, borrow=812a8f78 pri=2, maxidle=0, minidle=-4294966, maxq=48, clsfg=23 f=3892314111/100000, ns_per_byte=1072693248/100000 [qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT overflow New cls: id=5, bw=1338830 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=250, maxpktsz=1604, offtime=1370962, parent=812a8f78, borrow=812a8f78 pri=3, maxidle=0, minidle=-4294966, maxq=48, clsfg=23 f=3892314111/100000, ns_per_byte=1072693248/100000 [qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT overflow New cls: id=6, bw=1338830 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=250, maxpktsz=1604, offtime=1370962, parent=812a8f78, borrow=812a8f78 pri=4, maxidle=0, minidle=-4294966, maxq=48, clsfg=23 f=3892314111/100000, ns_per_byte=1072693248/100000 [qm_cbq_newcls] warning: bandwidth of the class may be low enough to cause INT overflow New cls: id=7, bw=1338830 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=250, maxpktsz=1604, offtime=1370962, parent=812a8f78, borrow=812a8f78 pri=5, maxidle=0, minidle=-4294966, maxq=48, clsfg=23 f=1157355966/100000, ns_per_byte=1086543359/100000 New cls: id=8, bw=808 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=250, maxpktsz=1604, offtime=745, parent=812a8f78, borrow=812a8f78 pri=7, maxidle=48, minidle=-2592, maxq=48, clsfg=20 CLOCKHZ=1000 gConfig.Interface[0].IP_Addr = 127.0.0.1 gConfig.Interface[0].Subnet_Mask = 255.255.255.255 time = 08/01/2003, 00:00:00 TRAP(linkUp) : send ok! Interface 0 ip = 127.0.0.1 gConfig.Interface[1].IP_Addr = 192.168.2.1 gConfig.Interface[1].Subnet_Mask = 255.255.255.0 vlan=1, vid=1, port_mask=0x1e switch_init ... Reg 0xA0: 0x1023 0xA1:0x7 0x12:0x3602 mac_0_init: interface 1 registered to VLAN 1 MAC Address: 00:12:bf:b3:b2:2d time = 08/01/2003, 00:00:00 TRAP(linkUp) : send ok! Interface 1 ip = 192.168.2.1 gConfig.Interface[2].IP_Addr = 0.0.0.0 gConfig.Interface[2].Subnet_Mask = 0.0.0.0 PCI: Probing PCI hardware on host bus 0. *(AMAZON_RST_REQ)=0 *(AMAZON_RST_REQ+4)=fffc0002 *(AMAZON_PMU_PWDCR)=3fff IRM 1=0x0 IRM 2=0x18000000 CLOCK_CONTROL=0x2 FPI_SEGMENT_ENABLE=0x3ff PCI_MODE=0x1000103 1a168c 2900000 2000001 0 0 0 0 0 0 0 5001 44131113 0 44 0 1c0a0100 Autoconfig PCI channel 0x804DF268 Scanning bus 0, I/O 0xb2400000:0xb2600001, Mem 0xb2000000:0xb2400001 201 203 pci_devfn=0x70 vid=0x168c 201 203 00:0e.0 Class 0200: 168c:001a (rev 01) Mem at 0xb2000000 [size=0x10000] 108 Scanning bus 00 Found 00:70 [168c/001a] 000200 00 201 203 201 203 Fixups for bus 00 Bus scan for 00 returning with max=00 1a168c 2900006 2000001 8000 b2000000 0 0 0 0 0 5001 44131113 0 44 0 1c0a014e [HWLAN] ifno=2 irno=7 port=0x00000000 [PCI] devtag=00000070 probe=8005c384 [HWLAN] devtag = 00000070 [HWLAN] Vendor ID 0x168c [HWLAN] Device ID 0x1a [HWLAN] Base Addr 0xb2000000 [HWLAN] SVendor ID 0x1113 [HWLAN] SDevice ID 0x4413 [HWLAN] Revision ID 0x1 [HWLAN] interrupt vector 0x1 201 203 201 203 PCI: Enabling device 00:0e.0 (0006 -> 0006) apCfgRadioDefaultSet> gSetting.channel=0, pRadio->channel=5260, pRadio->freqSpec=1 [HWLAN] pRadio->abolt = 00000000 apCfgRadioDefaultSet> gSetting.channel=0, pRadio->channel=2462, pRadio->freqSpec=8 [HWLAN] pRadio->abolt = 00000010 [HWLAN] gSetting.BasicRate=f [HWLAN] apCfgDefaultSet : prepare to set WDS.. apInit: Initialize Access Point. [HWLAN] ar5hwcCreatePhy : ifno:2 pdevInfo=807c9804, devno=1 [HWLAN] devno 1 pdevInfo 807c9804 [HWLAN] Base address = b2000000, irq 1 Attach AR5212 0x1a 0x807c9804 [HWLAN] DOMAIN 00008114 ar5212GetMacAddr: EEPROM MAC is all 0's or all F's [HWLAN] Set HWLAN MAC as LAN MAC .. [HWLAN] MAC Address=00-12-BF=B3-B2-2F [HWLAN] wlan1 revisions: mac 7.8 phy 4.5 analog 5.6 eeprom 5.2 [apCfgRadioCheck] nRadio=1 [apCfgRadioCheck] wmode=12, pRadio1->freqSpec=8 [ar5hwcCreatePhy] devno=1, opModes=8 [wlanInitChannelList] wireless_selection=0x8 [HWLAN] country code = 00000114 wlanInitChannelList -- country: DE, mode: 8 11g [HWLAN] wlanInitChannelList -- 13 channels [HWLAN] 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 [wlanGetChannelPtr] channel=2462, modeSelect=8, pCList->listSize=13[wlanGetChannelPtr] pCList->chanArray[0].channelFlags=0x5400, modeTable[3].channelFlags=0x1400 [wlanGetChannelPtr] pCList->chanArray[1].channelFlags=0x5400, modeTable[3].channelFlags=0x1400 [wlanGetChannelPtr] pCList->chanArray[2].channelFlags=0x5400, modeTable[3].channelFlags=0x1400 [wlanGetChannelPtr] pCList->chanArray[3].channelFlags=0x5400, modeTable[3].channelFlags=0x1400 [wlanGetChannelPtr] pCList->chanArray[4].channelFlags=0x5400, modeTable[3].channelFlags=0x1400 [wlanGetChannelPtr] pCList->chanArray[5].channelFlags=0x5400, modeTable[3].channelFlags=0x1400 [wlanGetChannelPtr] pCList->chanArray[6].channelFlags=0x5400, modeTable[3].channelFlags=0x1400 [wlanGetChannelPtr] pCList->chanArray[7].channelFlags=0x5400, modeTable[3].channelFlags=0x1400 [wlanGetChannelPtr] pCList->chanArray[8].channelFlags=0x5400, modeTable[3].channelFlags=0x1400 [wlanGetChannelPtr] pCList->chanArray[9].channelFlags=0x5400, modeTable[3].channelFlags=0x1400 [wlanGetChannelPtr] pCList->chanArray[10].channelFlags=0x5400, modeTable[3].channelFlags=0x1400 [HWLAN] phwChannel 2462, channelFlags 00005400 [HWLAN] size of ATHEROS_DESC hardware part 32 [HWLAN] CACHE_LINE_SIZE 16, AR_DESC_SIZE 128 [HWLAN] AR_HEADER_SIZE 96, AR_BUF_SIZE 1696numDescriptors = 704 [HWLAN] wlan1: pDmaBuf=A04F1890 [HWLAN] pMemBuf a04f1890 pdevInfo->pDmaBuf a04f1890 [HWLAN] ar5hwcQueueCreate: semaphore id 80687a24 [HWLAN] ar5hwcQueueCreate: semaphore id 80687a38 [HWLAN] ar5hwcQueueCreate: semaphore id 80687a4c [HWLAN] ar5hwcQueueCreate: semaphore id 80687a60 [HWLAN] pMemBuf a050d890, pdevInfo->pDmaBuf + pdevInfo->dmaBufSize a05280b0 [HWLAN] muxDevLoad is called for vportNum 10000, loadfn 8007b840, vportStr 16: 0: 1 OFDM 2X Maxes: MaxRD: 40 TurboMax: 38 MaxCTL: 27 TPC_Reduction 0 Final Scaled Power 27 *** Power Level Debug on channel 2462 mode 0x5400 *** *** Rates per Power - exact dBm (pre power table adjustment) *** 6mb OFDM 13.5 dBm | 1L CCK 16.5 dBm 9mb OFDM 13.5 dBm | 2L CCK 16.5 dBm 12mb OFDM 13.5 dBm | 2S CCK 16.5 dBm 18mb OFDM 13.5 dBm | 5.5L CCK 16.5 dBm 24mb OFDM 13.5 dBm | 5.5S CCK 16.5 dBm 36mb OFDM 13.5 dBm | 11L CCK 16.5 dBm 48mb OFDM 13.5 dBm | 11S CCK 16.5 dBm 54mb OFDM 13.5 dBm | XR 13.5 dBm ch: 2462, minCalPower2413_t2 = 0 dBm 0 -> pdadc 0 | dBm 1 -> pdadc 0 dBm 2 -> pdadc 0 | dBm 3 -> pdadc 0 pdadc[0] = 0x0 [offset = 0xa280] dBm 4 -> pdadc 0 | dBm 5 -> pdadc 0 dBm 6 -> pdadc 0 | dBm 7 -> pdadc 0 pdadc[1] = 0x0 [offset = 0xa284] dBm 8 -> pdadc 1 | dBm 9 -> pdadc 1 dBm 10 -> pdadc 2 | dBm 11 -> pdadc 2 pdadc[2] = 0x2020101 [offset = 0xa288] dBm 12 -> pdadc 3 | dBm 13 -> pdadc 4 dBm 14 -> pdadc 6 | dBm 15 -> pdadc 8 pdadc[3] = 0x8060403 [offset = 0xa28c] dBm 16 -> pdadc 10 | dBm 17 -> pdadc 12 dBm 18 -> pdadc 12 | dBm 19 -> pdadc 14 pdadc[4] = 0xe0c0c0a [offset = 0xa290] dBm 20 -> pdadc 16 | dBm 21 -> pdadc 18 dBm 22 -> pdadc 20 | dBm 23 -> pdadc 22 pdadc[5] = 0x16141210 [offset = 0xa294] dBm 24 -> pdadc 24 | dBm 25 -> pdadc 26 dBm 26 -> pdadc 0 | dBm 27 -> pdadc 0 pdadc[6] = 0x1a18 [offset = 0xa298] dBm 28 -> pdadc 0 | dBm 29 -> pdadc 0 dBm 30 -> pdadc 1 | dBm 31 -> pdadc 2 pdadc[7] = 0x2010000 [offset = 0xa29c] dBm 32 -> pdadc 3 | dBm 33 -> pdadc 4 dBm 34 -> pdadc 5 | dBm 35 -> pdadc 5 pdadc[8] = 0x5050403 [offset = 0xa2a0] dBm 36 -> pdadc 6 | dBm 37 -> pdadc 6 dBm 38 -> pdadc 7 | dBm 39 -> pdadc 7 pdadc[9] = 0x7070606 [offset = 0xa2a4] dBm 40 -> pdadc 8 | dBm 41 -> pdadc 8 dBm 42 -> pdadc 9 | dBm 43 -> pdadc 10 pdadc[10] = 0xa090808 [offset = 0xa2a8] dBm 44 -> pdadc 11 | dBm 45 -> pdadc 12 dBm 46 -> pdadc 13 | dBm 47 -> pdadc 15 pdadc[11] = 0xf0d0c0b [offset = 0xa2ac] dBm 48 -> pdadc 16 | dBm 49 -> pdadc 18 dBm 50 -> pdadc 19 | dBm 51 -> pdadc 21 pdadc[12] = 0x15131210 [offset = 0xa2b0] dBm 52 -> pdadc 23 | dBm 53 -> pdadc 25 dBm 54 -> pdadc 27 | dBm 55 -> pdadc 29 pdadc[13] = 0x1d1b1917 [offset = 0xa2b4] dBm 56 -> pdadc 31 | dBm 57 -> pdadc 34 dBm 58 -> pdadc 38 | dBm 59 -> pdadc 42 pdadc[14] = 0x2a26221f [offset = 0xa2b8] dBm 60 -> pdadc 45 | dBm 61 -> pdadc 49 dBm 62 -> pdadc 49 | dBm 63 -> pdadc 53 pdadc[15] = 0x3531312d [offset = 0xa2bc] dBm 64 -> pdadc 57 | dBm 65 -> pdadc 61 dBm 66 -> pdadc 65 | dBm 67 -> pdadc 69 pdadc[16] = 0x45413d39 [offset = 0xa2c0] dBm 68 -> pdadc 73 | dBm 69 -> pdadc 77 dBm 70 -> pdadc 81 | dBm 71 -> pdadc 85 pdadc[17] = 0x55514d49 [offset = 0xa2c4] dBm 72 -> pdadc 89 | dBm 73 -> pdadc 93 dBm 74 -> pdadc 97 | dBm 75 -> pdadc 101 pdadc[18] = 0x65615d59 [offset = 0xa2c8] dBm 76 -> pdadc 101 | dBm 77 -> pdadc 101 dBm 78 -> pdadc 101 | dBm 79 -> pdadc 101 pdadc[19] = 0x65656565 [offset = 0xa2cc] dBm 80 -> pdadc 101 | dBm 81 -> pdadc 101 dBm 82 -> pdadc 101 | dBm 83 -> pdadc 101 pdadc[20] = 0x65656565 [offset = 0xa2d0] dBm 84 -> pdadc 101 | dBm 85 -> pdadc 101 dBm 86 -> pdadc 101 | dBm 87 -> pdadc 101 pdadc[21] = 0x65656565 [offset = 0xa2d4] dBm 88 -> pdadc 101 | dBm 89 -> pdadc 101 dBm 90 -> pdadc 101 | dBm 91 -> pdadc 101 pdadc[22] = 0x65656565 [offset = 0xa2d8] dBm 92 -> pdadc 101 | dBm 93 -> pdadc 101 dBm 94 -> pdadc 101 | dBm 95 -> pdadc 101 pdadc[23] = 0x65656565 [offset = 0xa2dc] dBm 96 -> pdadc 101 | dBm 97 -> pdadc 101 dBm 98 -> pdadc 101 | dBm 99 -> pdadc 101 pdadc[24] = 0x65656565 [offset = 0xa2e0] dBm 100 -> pdadc 101 | dBm 101 -> pdadc 101 dBm 102 -> pdadc 101 | dBm 103 -> pdadc 101 pdadc[25] = 0x65656565 [offset = 0xa2e4] dBm 104 -> pdadc 101 | dBm 105 -> pdadc 101 dBm 106 -> pdadc 101 | dBm 107 -> pdadc 101 pdadc[26] = 0x65656565 [offset = 0xa2e8] dBm 108 -> pdadc 101 | dBm 109 -> pdadc 101 dBm 110 -> pdadc 101 | dBm 111 -> pdadc 101 pdadc[27] = 0x65656565 [offset = 0xa2ec] dBm 112 -> pdadc 101 | dBm 113 -> pdadc 101 dBm 114 -> pdadc 101 | dBm 115 -> pdadc 101 pdadc[28] = 0x65656565 [offset = 0xa2f0] dBm 116 -> pdadc 101 | dBm 117 -> pdadc 101 dBm 118 -> pdadc 101 | dBm 119 -> pdadc 101 pdadc[29] = 0x65656565 [offset = 0xa2f4] dBm 120 -> pdadc 101 | dBm 121 -> pdadc 101 dBm 122 -> pdadc 101 | dBm 123 -> pdadc 101 pdadc[30] = 0x65656565 [offset = 0xa2f8] dBm 124 -> pdadc 101 | dBm 125 -> pdadc 101 dBm 126 -> pdadc 101 | dBm 127 -> pdadc 101 pdadc[31] = 0x65656565 [offset = 0xa2fc] gainBoundaries [16, 46, 46, 46] and gainOverlap : 10 reg 0xa26c = 0xbaeb90a reg 0xa258 = 0xcc75380 [numPdGans = [15:14], forceDacGain = [29]] reg 0xa274 = 0x1b7caa [forceTxGain = [0]] TX Power settings: curve(s) returned minPower 27 (2x dBm), maxPower 33 (2x dBm) Power Offset 0 (2x dBm) XpdGain's [0] 0x3, [1] 0x1 *** Actual power per rate table as programmed *** 6mb OFDM 13.5 dBm | 1L CCK 16.5 dBm 9mb OFDM 13.5 dBm | 2L CCK 16.5 dBm 12mb OFDM 13.5 dBm | 2S CCK 16.5 dBm 18mb OFDM 13.5 dBm | 5.5L CCK 16.5 dBm 24mb OFDM 13.5 dBm | 5.5S CCK 16.5 dBm 36mb OFDM 13.5 dBm | 11L CCK 16.5 dBm 48mb OFDM 13.5 dBm | 11S CCK 16.5 dBm 54mb OFDM 13.5 dBm | XR 13.5 dBm [HWLAN] ioctl CMD=0xb [HWLAN] bridgePortAdd : vp, 10000 [HWLAN] bridgePortAdd (base BSS) succeeded for vp1 should call linkSockAttach() wlan1 added STA: 00:12:bf:b3:b2:2f (0) [HWLAN] ifno=2 after call apInit() : .... bg 1 , a 0 .... time = 08/01/2003, 00:00:00 TRAP(linkUp) : send ok! [HWLAN] hwlan_ioctl() .. Interface 2 ip = 192.168.2.1 [HWLAN] hwlan_ioctl() .. gConfig.Interface[3].IP_Addr = 0.0.0.0 gConfig.Interface[3].Subnet_Mask = 0.0.0.0 Init SAR ifno:3 QID:1 VPI/VCI:1/32 CBM_CELL_SIZE(64) * dev->cbm.free_cell_cnt(16384)=1048576 Addr=0x80b565c0 CBM_QD_SIZE(16) * AMAZON_ATM_MAX_QUEUE_NUM(32)=512 Addr=0x80b56380 amazon_atm_devs[0] = 0x80b562bc registering device 0 ATM_UBR vpi 1 vci 32 itf 0 aal 5 tx cl 1 bw 0 mtu 0 rx cl 1 bw 4000 mtu 0 Class=1 QSB_CLK=58750000 MAX_PCR=0 PCR=4000 MIN_PCR=0 SCR=4000 MBS=10 CDV=0 tprs:0 twfq:16383 ts:0 taus:0 MAC Address: 00:12:bf:b3:b2:2e Interface 3 ip = 0.0.0.0 gConfig.Interface[11].IP_Addr = 0.0.0.0 gConfig.Interface[11].Subnet_Mask = 0.0.0.0 IFLNK_PPPOE init : (Linkp)ifno = 11 idx = 2 IFLNK_PPPOE init : (Driverp)ifno = 11 idx = 3 Interface 11 ip = 0.0.0.0 gConfig.Interface[26].IP_Addr = 0.0.0.0 gConfig.Interface[26].Subnet_Mask = 0.0.0.0 vlan=1, vid=2, port_mask=0x1 mac_0_init: interface 26 registered to VLAN 2 MAC Address: 00:12:bf:b3:b2:2d time = 08/01/2003, 00:00:00 TRAP(linkUp) : send ok! iput_IpLinkUp(ifno=26)> ifp->add_default_route:1 Re-Init NAT data structure Init NAT data structure Interface 26 ip = 0.0.0.0 ruleCheck()> Group: 0, Error: Useless rule index will be truncated ruleCheck()> Group: 1, Error: Useless rule index will be truncated ruleCheck()> Group: 2, Error: Useless rule index will be truncated CBAC rule format check succeed !! reqCBACBuf()> init match pool, Have: 1000 Memory Address: 0x8124951c ~ 0x81250298 reqCBACBuf()> init timeGap pool, Have: 10000 Memory Address: 0x81250298 ~ 0x81280fec reqCBACBuf()> init sameHost pool, Have: 2000 Memory Address: 0x81280fec ~ 0x81290a0c CBAC rule pool initialized !! 1 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 2 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 3 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 11 set_timer: ti=0 type=1 ina[00000000] gid[00000000] 26 set_timer: ti=0 type=1 ina[00000000] gid[00000000] Init NAT data structure RUNTASK id=2 if_task if0... RUNTASK id=3 if_task if1... RUNTASK id=4 if_task if2... RUNTASK id=5 if_task if3... RUNTASK id=6 if_task if26... RUNTASK id=7 timer_task... RUNTASK id=8 conn_mgr... RUNTASK id=9 main_8021x... RUNTASK id=10 period_task... ========== ADSL Modem initialization OK ! ====== RUNTASK id=11 dhcp_daemon... Primary image: 1, flash area 3 ---[ ZIP1 head start in 0xB3220000 ]--- found signature: 78h 56h 34h 12h ulImgLens=1175395, LENGTH[3]-12=1900532 length checking OK [0] find End at 0xB333EC00 len=1175395 ---[ ZIP1 head start in 0xB333F000 ]--- found signature: 78h 56h 34h 12h ulImgLens=239948, LENGTH[3]-12=1900532 length checking OK [1] find End at 0xB3379800 len=239948 ---[ ZIP1 head start in 0xB3379C00 ]--- found signature: 78h 56h 34h 12h ulImgLens=93086, LENGTH[3]-12=1900532 length checking OK [2] find End at 0xB3390400 len=93086 ---[ ZIP1 head start in 0xB3390800 ]--- found signature: 78h 56h 34h 12h ulImgLens=149729, LENGTH[3]-12=1900532 length checking OK [3] find End at 0xB33B5000 len=149729 Image[1] at 0x0011EF63, len = 1175395 Image[2] at 0x0003A94C, len = 239948 Image[3] at 0x00016B9E, len = 93086 Image[4] at 0x000248E1, len = 149729 Unzipping from B333F000 to 81D00000 ... [ZIP1] done Uncompressed size = 1487492 drive start addr[0]=81d00000, [1]=81e6b290 [HTTPD] flash_init: failed!! httpd: listen at 192.168.2.1:80 httpd: listen at 0.0.0.0:9000 httpd: listen at 0.0.0.0:8085 RUNTASK httpd... RUNTASK id=16 SSLRelayServer ... RUNTASK id=17 SSLClient ... RUNTASK id=18 dnsproxy... RUNTASK id=19 dhcpd_mgmt_task... UPnP is disabled update_device_OUI: OUI_str=0012BF [0] Allocate mailbox 6 Tr69_Init: Tr69_Task sleeping Tr69_Init: Tr69_TimerTask sleeping Starting Multitask... [0] Allocate resource 27, FreeResource = 1 ifx_ssc_init : nbytes 136 ifx_ssc_set_baud: br = 2 call ifx_ssc_init() = 0 call ifx_ssc_open() = 0 SPI_Init! T_WLAN_INT=2 gSetting.CountryCode=0x8114 gSetting.Interface[T_WLAN_INT].Link_Type=1 RUNTASK id=25 apAppInit... RUNTASK id=28 ScanMIH_task... [qm_outbnd_bw_update] ... [qm_cbq_resetclst] n_totalcls=9 aft rst: id=0, bw=799 ns/byte, maxd=0 ms, maxb=32, minb=2, avgpktsz=250, maxpktsz=1604, offtime=362, parent=0, borrow=0 pri=0, maxidle=113, minidle=-2566, maxq=96, clsfg=17 aft rst: id=1, bw=79999 ns/byte, maxd=0 ms, maxb=16, minb=1, avgpktsz=1604, maxpktsz=1604, offtime=128191, parent=812aa578, borrow=812aa578 pri=7, maxidle=34157, minidle=-256639, maxq=48, clsfg=21 aft rst: id=2, bw=808 ns/byte, maxd=0 ms, maxb=32, minb=4, avgpktsz=250, maxpktsz=1604, offtime=745, parent=812aa578, borrow=812aa578 pri=0, maxidle=114, minidle=-2592, maxq=96, clsfg=21 aft rst: id=3, bw=1338830 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=250, maxpktsz=1604, offtime=1370962, parent=812a8f78, borrow=812a8f78 pri=0, maxidle=0, minidle=-4294966, maxq=96, clsfg=21 aft rst: id=4, bw=1338830 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=250, maxpktsz=1604, offtime=1370962, parent=812a8f78, borrow=812a8f78 pri=2, maxidle=0, minidle=-4294966, maxq=48, clsfg=23 aft rst: id=5, bw=1338830 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=250, maxpktsz=1604, offtime=1370962, parent=812a8f78, borrow=812a8f78 pri=3, maxidle=0, minidle=-4294966, maxq=48, clsfg=23 aft rst: id=6, bw=1338830 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=250, maxpktsz=1604, offtime=1370962, parent=812a8f78, borrow=812a8f78 pri=4, maxidle=0, minidle=-4294966, maxq=48, clsfg=23 aft rst: id=7, bw=1338830 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=250, maxpktsz=1604, offtime=1370962, parent=812a8f78, borrow=812a8f78 pri=5, maxidle=0, minidle=-4294966, maxq=48, clsfg=23 aft rst: id=8, bw=808 ns/byte, maxd=0 ms, maxb=16, minb=4, avgpktsz=250, maxpktsz=1604, offtime=745, parent=812a8f78, borrow=812a8f78 pri=7, maxidle=48, minidle=-2592, maxq=48, clsfg=20 Unzip DSP firmware ... Unzipping from B3390800 to 811AE29C ... [ZIP1] [qm_cbq_enable] CBQ enabled at link: 0, DeQTask=29, wakeup event=12 low_pri_mtu: 25031 [qm_outbnd_bw_update] ok done Uncompressed size = 465468 ADSL Firmware: 1.4.0.13.0.2 [Annex B:0x4208 0x0] ifno2dot1x_if[2]=0 ifno2dot1x_if[24]=81 [main_8021x] dot1x_build_if_mapping() completed. init psock cnt=1 rzMemory start: 0x809F6AAC, end 0x80B562AC, size 1439744 VOICE_DRV_Init Reset Duslic 2 High begin Reset Duslic end VINETIC module, version : 1.1.17.3 loaded Board_InitPlatform! Board_InitIrq! [26] Allocate resource 28, FreeResource = 2 [26] Allocate resource 29, FreeResource = 3 [26] Allocate resource 30, FreeResource = 4 [26] Allocate resource 31, FreeResource = 5 [26] Allocate resource 32, FreeResource = 6 [26] Allocate resource 33, FreeResource = 7 Devnum 1, Ch 0 opened VINETIC_Open /dev/vin10: -2140429624 VINETIC_BasicDeviceInit! VINETIC_BasicDeviceInit: ret = 0! state ------> 20 Devnum 1, Ch 1 opened VINETIC_Open /dev/vin11: -2140429540 [26] Allocate resource 34, FreeResource = 8 [26] Allocate resource 35, FreeResource = 9 [26] Allocate resource 36, FreeResource = 10 [26] Allocate resource 37, FreeResource = 11 initVineticTapi: pInit = 0x808fc3c8 bbd_get_block: bbd->buf = 0x8043e510, bbd->size = 288 bbd_get_block: bbd->buf = 0x8043e510, bbd->size = 288 bbd_get_block: bbd->buf = 0x8043e510, bbd->size = 288 bbd_get_block: bbd->buf = 0x8043e510, bbd->size = 288 VINETIC_Host_InitChip: nRev= 20832 VINETIC_Host_InitChip: pDev->nChipRev = 96 Dwld_LoadFirmware: P_RAM ret = 0 Dwld_LoadFirmware: D_RAM ret = 0 Dwld_LoadFirmware: ActivateEdsp ret = 0 Host_DownloadCram: bbd->buf = 0x8043e510, bbd->size = 288 bbd_get_block: bbd->buf = 0x8043e510, bbd->size = 288 bbd_get_block: bbd->buf = 0x8043e510, bbd->size = 288 Host_SetSlic: bbd->buf = 0x8043e510, bbd->size = 288 bbd_get_block: bbd->buf = 0x8043e510, bbd->size = 288 Host_SetSlic: bbd_slic.data = 0x8043e60a, bbd_slic.size = 2 bbd_get_block: bbd->buf = 0x8043e510, bbd->size = 288 bbd_get_block: bbd->buf = 0x8043e510, bbd->size = 288 initVineticTapi: ret = 0 VINETIC_Ioctl: Phone 1 IFXPHONE_INIT ok! VINETIC_Ioctl: Phone 1 IFXPHONE_SET_LINEFEED ok! Devnum 1, Ch 2 opened VINETIC_Open /dev/vin12: -2140428156 VINETIC_Ioctl: Phone 2 IFXPHONE_INIT ok! VINETIC_Ioctl: Phone 2 IFXPHONE_SET_LINEFEED ok! Devnum 1, Ch 3 opened VINETIC_Open /dev/vin13: -2140426772 VINETIC_Ioctl: Phone 3 IFXPHONE_INIT ok! VINETIC_Ioctl: Phone 3 IFXPHONE_SET_LINEFEED ok! Devnum 1, Ch 4 opened VINETIC_Open /dev/vin14: -2140425388 VINETIC_Ioctl: Phone 4 IFXPHONE_INIT ok! VINETIC_Ioctl: Phone 4 IFXPHONE_SET_LINEFEED ok! RUNTASK id=23 VINETIC_DRV_Task... [30] Allocate mailbox 7 RUNTASK id=30 VINETIC_T38_Task... RUNTASK id=32 FXO_flash_task... RUNTASK id=31 VOICE_API_task... Step 0 Duslic debug: open device! Board_DevOpen Board_DevOpen 4 77 ---------------------duslic_ResetChMember begin DUSLIC_GpioInit begin DUSLIC_GpioInit end ---------------------duslic_ResetChMember end DUSLIC_Init begin DUSLIC_GpioInit begin DUSLIC_GpioInit end Dwld_LoadCram begin 0 ----> Dwld_LoadCram end DUSLIC_GpioInit begin DUSLIC_GpioInit end Dwld_LoadCram begin 1 ----> Dwld_LoadCram end DUSLIC_Init end DUSLIC_Set_Pcm begin DUSLIC_Set_Pcm End init_DTMF_data: time 3141 cpc5621_open: open devNum=0, chNum=0, pDev=00000000, CPC5621_Devices=804df81c Drv_CPC5621_Init: 0, 1 Drv_CPC5621_Init end pDev->devHandle 806C5D4C cpc5621_open: open devNum=0, chNum=0, pDev=809eb2b4 before pDev->bOpen == TRUE after pDev->bOpen == TRUE CPC_IO_InstanceInit pDev 809EB2B4 begin before DUSLIC_GpioReserve pDev 809EB2B4 pDev->devHandle 806C5D4C before DUSLIC_GpioConfig 0 :::::::::::::_GpioConfig begin 806C5D4C Gpio->nIO 0 :::GPIO_MODE_OUTPUT :::GPIO_INT_DUP_605 :::::::::::::_GpioConfig end before DUSLIC_GpioConfig 1 before DUSLIC_GpioConfig 2 :::::::::::::_GpioConfig begin 806C5D4C Gpio->nIO 1 :::GPIO_MODE_INPUT :::GPIO_MODE_INT :::GPIO_INT_FALLING :::GPIO_INT_DUP_605 :::::::::::::_GpioConfig end before DUSLIC_GpioConfig 3 :::::::::::::_GpioConfig begin 806C5D4C Gpio->nIO 2 :::GPIO_MODE_INPUT :::GPIO_MODE_INT :::GPIO_INT_RISING :::GPIO_INT_FALLING :::GPIO_INT_DUP_605 :::::::::::::_GpioConfig end before DUSLIC_GpioConfig 4 :::::::::::::_GpioConfig begin 806C5D4C Gpio->nIO 3 :::GPIO_MODE_INPUT :::GPIO_MODE_INT :::GPIO_INT_FALLING :::GPIO_INT_DUP_605 :::::::::::::_GpioConfig end force_daa_offhook ch 2 onoff 1 time 3164 SSLServer> SSLServer() run PrivateKey= MyCertificate= CaCertificate= SSL_method=31 verify_mode=0 cipher_suites=ADH:SHA1:HIGH:EXP tftp_server_ip=140.92.61.131 fn_myCerttificate=ServCert.pem fn_privateKey=PrivKey.pem fn_caCertificate=CaCert.pem force_daa_offhook ch 2 onoff 0 time 3193 CID_Detect CH 2 onoff 1 FXO_PolState_DTMFCID --> Detect Polarity Changed Enable DTMF CID TEL_DRV_Init TEL_DRV_StartDetVOIPHook TEL_DRV_StartDetDTMF TEL_DRV_StartDetCEDTone TEL_DRV_StartDetVOIPHook TEL_DRV_StartDetDTMF TEL_DRV_StartDetCEDTone TEL_DRV_InitTone When * the value is 60000 When * the value is 60000 sys_voip_cfg->cpt.reorder = 425@-230;20(0.24/0.24/1) TEL_DRV_TONE_REORDER duration = 480 TEL_DRV_InitRing TEL_DRV_SetImpedance >>>> STUN Setting <<<< stun Enable : 1 stun Test Enable : 1 stun Server : "", IP : 0.0.0.0 stun Port : 3478 stun Server : "", IP : 0.0.0.0 stun Port : 3478 stun Server : "", IP : 0.0.0.0 stun Port : 3478 stun Server : "", IP : 0.0.0.0 stun Port : 3478 stun Server : "", IP : 0.0.0.0 stun Port : 3478 stun Server : "", IP : 0.0.0.0 stun Port : 3478 stun Server : "", IP : 0.0.0.0 stun Port : 3478 stun Server : "", IP : 0.0.0.0 stun Port : 3478 stun Server : "", IP : 0.0.0.0 stun Port : 3478 stun Server : "", IP : 0.0.0.0 stun Port : 3478 RUNTASK id=33 STUNC_InitTask() ... [26] Allocate resource 38, FreeResource = 12 [26] Allocate mailbox 8 VOICE_DRV_SetRxDataHookFunc VOICE_DRV_SetRxDataHookFunc TEL_MGR_Init [26] Allocate resource 39, FreeResource = 13 tel_mgr_mutex=39 [26] Allocate mailbox 9 TEL_DM_Init [26] Allocate resource 40, FreeResource = 14 [26] Allocate resource 41, FreeResource = 15 TEL_DRV_SetPhoneEvtHookFunc TEL_DRV_SetLineEvtHookFunc TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: *31# TEL_MGR_SetDigitMap: #31# TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: *37# TEL_MGR_SetDigitMap: #37# TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: [2-9]# TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: (x.|0900326690xx|019301xx|0191066730) TEL_MGR_SetDigitMap: *91# TEL_MGR_SetDigitMap: #91# TEL_MGR_SetDigitMap: *09# TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: **258*** TEL_MGR_SetDigitMap: **258**1 TEL_MGR_SetDigitMap: **258**2 TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: *31# TEL_MGR_SetDigitMap: #31# TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: *37# TEL_MGR_SetDigitMap: #37# TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: [2-9]# TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: (x.|0900326690xx|019301xx|0191066730) TEL_MGR_SetDigitMap: *91# TEL_MGR_SetDigitMap: #91# TEL_MGR_SetDigitMap: *09# TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: TEL_MGR_SetDigitMap: **258*** TEL_MGR_SetDigitMap: **258**1 TEL_MGR_SetDigitMap: **258**2 TEL_MGR_VoiceChannelInit TEL_MGR_SetVoiceChannel TEL_MGR_SetVoiceChannel: ec mode is 16ms TEL_MGR_SetPhoneEC VOICE_DRV_SetEC TEL_MGR_SetPhoneVAD VOICE_DRV_SetVAD TEL_MGR_SetPhoneGain VOICE_DRV_SetGain ------------------------>TAPI_LL_Phone_Volume Ch 0 TxGain 0 RxGain -7 TEL_MGR_SetPhoneJitter VOICE_DRV_SetJitter TEL_MGR_SetVoiceChannel TEL_MGR_SetVoiceChannel: ec mode is 16ms TEL_MGR_SetPhoneEC VOICE_DRV_SetEC TEL_MGR_SetPhoneVAD VOICE_DRV_SetVAD TEL_MGR_SetPhoneGain VOICE_DRV_SetGain ------------------------>TAPI_LL_Phone_Volume Ch 1 TxGain 0 RxGain -7 TEL_MGR_SetPhoneJitter VOICE_DRV_SetJitter SIP_CALLBACK_EnableDebug SIP_CORE_EnableDebug SIP_CORE_Init [26] Allocate resource 42, FreeResource = 16 [26] Allocate mailbox 10 SIP_CORE_SetSipStatus SIP_CORE_CreateTask >>> SIP_CORE_Task [26] Allocate resource 43, FreeResource = 17 [26] Allocate mailbox 11 [26] Allocate mailbox 12 [26] Allocate mailbox 13 [26] Allocate mailbox 14 SSLClient> SSLClient() run dt_provision_task> running dt_provision_task> activate TR69 ScanMIH_task> DHCP ip give: 192.168.2.100 ~ 199, range: 100 pCtx=0x809e9784 in ssld_conf_init dt_provision_task> provisioned, enable GUI sslc_conf_init> pCtx=0x809e72c0 in ssld_conf_init SSL client> re-LoadCACertificate( 3rdCA ) ok!! SSL client> re-LoadCACertificate( Verisign ) ok!! SSL client> re-LoadCACertificate( FUN ) ok!! SSL client> re-LoadServerCertAndKey() ok!! sslc_conf_init> sslc_conf_init() ok SSLClient> want to bind socket for client application! SSL server: re-LoadCACertificate() ok!! SSL server : re-LoadServerCertAndKey() ok!! ssld_conf_init> ssld_conf_init() ok RUNTSK l2s3 22 RUNTSK l3l2 26 RUNTSK lll2 36 RUNTSK decrTout 37 ISDN: Q_L2S3:3, Q_L3L2:4, Q_LLL2:5 !IFX_FA_Init: IFIN_FA_StatusBitsInfo error TEL_DRV_EOFEvtCB: channelId(0) !TEL_MGR_ProcPhoneFaxStop !TEL_MGR_ProcPhoneFaxStop: no active call !TEL_MGR_ProcMsg: TEL_MGR_ProcPhoneFaxStop Atheros_NetTask running ... RUNTASK id=39 Atheros_NetTask ... 513 pVportBaseBss=0x807c7140 514 [HWLAN] Ready muxDevStop is called ... bridgePortRemove : vp, 10000 Bridge port (base BSS) remove succeeded for vp1 rapi_tmr_cancel: cookie 80f7d2fc, Initialized=1 00000000 80f7d2fc cookie 80f7d2fc 80f7d2fc rapi_tmr_cancel: can't find time structure cookie 80f7d2fc [HWLAN] ar5hwcIntDisable : STATE_AP_DOWN , pdevInfo->localSta=807BF2F0 state=0100 wlan1 stopped [reset_802dot1x] wireless module ready [init_wpa] dot1x_ready[0]=3 [init_wpa] dot1x_ready[1]=3 [init_wpa] dot1x_ready[2]=3 [init_wpa] dot1x_ready[3]=3 [init_wpa] dot1x_ready[4]=3 [init_wpa] dot1x_ready[5]=3 [reset_802dot1x] 802.1Xv2 ready

Oldwiki Infos

Tags

Back to top

toh/t-com/spw700v.txt · Last modified: 2014/04/05 17:21 (external edit)