User Tools

Site Tools


toh:thomson:tcw710

This is an old revision of the document!


Thomson TCW710

Hardware Highlights

CPU Ram Flash Network USB(Network) USB (host) Serial JTag
Broadcom BCM3349 16MB 4MB 1 1 No Yes Yes

Installation

Hardware

Info

Architecture: MIPS
Vendor: Broadcom
Bootloader: ?
System-On-Chip: Broadcom 3349KPB
CPU Speed: 200 Mhz
Flash-Chip: Spansion S29GL064N90TF104
Flash size: 4 MB
RAM-Chip: EtronTech EM639165TS-7G
RAM: 8 MB
Wireless: Broadcom BCM4318KFBG 802.11b/g (onboard)
Ethernet: 1
USB(network): 1
USB(Host): No
Serial: Yes
JTAG: Yes

PCB photos

tcw710.top.jpg tcw710.bottom.jpg

Opening the case

Note: This will void your warranty!

  • There are four torx screws holding the bottom and top halves of the case together.

Serial

port.serial general information about the serial port, serial port cable, etc.

How to connect to the Serial Port of this specific device:

       |---|
front  | o | 3.3V  (pin 1)
 of      o | GND
 the     o | Tx
board  | o | Rx
       |---|

Speed (baud)     - 115200
Data bits        - 8
Stop bits        - 1
Parity           - None
Flow control     - None

JTAG

How to connect to JTAG interface, and how to reflash the device with JTAG tools

See port.jtag for more JTAG details.

Bootlogs

OEM bootlog


Tags

toh/thomson/tcw710.1510309045.txt.bz2 · Last modified: 2017/11/10 11:17 by Hispano