User Tools

Site Tools


toh:thomson:tg582n

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Previous revision
toh:thomson:tg582n [2013/10/22 09:47]
toh:thomson:tg582n [2015/06/03 13:29] (current)
terry
Line 74: Line 74:
  
 ==== Flash Layout ==== ==== Flash Layout ====
-Please check out the article [[doc:​techref:​Flash Layout]]. It contains an example and a couple of explanations.+Please check out the article [[doc:​techref:​Flash.Layout]]. It contains an example and a couple of explanations.
  
 ==== OEM easy installation ==== ==== OEM easy installation ====
Line 250: Line 250:
 ===== Bootlogs ===== ===== Bootlogs =====
 ==== OEM bootlog ==== ==== OEM bootlog ====
 +Board: DANT-T, Software release: 8.4.4.J, Software variant: BV, Bootloader: 1.0.5.
 +<​HTML>​
 +<p style="​padding:​ 10px;​border:​1px solid grey;​height:​600px;​font:​10px/​14px Georgia, Garamond, Serif;​overflow:​Auto;​background-color:#​FFFFFF">​
 +<​code>​Decompressing Bootloader..............................
 +
 +Gateway initialization sequence started.
 +
 +
 +Version BL: 1.0.5
 +Multicore disable; Booting Linux kernel
 +
 +BOOTING THE LINUX KERNEL
 +
 +Starting the kernel @ 0x801ddde0
 +Extra parameters passed to Linux:
 +        [0]: bootloader
 +        [1]: memsize=0x3EDD000
 +Linux version 2.6.30 (gcc version 3.4.6) #1 Wed Jul 20 16:54:36 CST 2011
 +BCM63XX prom init
 +CPU revision is: 0002a075 (Broadcom4350)
 +Determined physical RAM map:
 + ​memory:​ 03edb000 @ 00002000 (usable)
 +Wasting 64 bytes for tracking 2 unused pages
 +Zone PFN ranges:
 +  DMA      0x00000002 -> 0x00001000
 +  Normal ​  ​0x00001000 -> 0x00003edd
 +Movable zone start PFN for each node
 +early_node_map[1] active PFN ranges
 +    0: 0x00000002 -> 0x00003edd
 +On node 0 totalpages: 16091
 +free_area_init_node:​ node 0, pgdat 80234390, node_mem_map 81000040
 +  DMA zone: 32 pages used for memmap
 +  DMA zone: 0 pages reserved
 +  DMA zone: 4062 pages, LIFO batch:0
 +  Normal zone: 94 pages used for memmap
 +  Normal zone: 11903 pages, LIFO batch:1
 +Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 15965
 +Kernel command line: root=31:0 ro noinitrd memsize=0x3EDD000 console=ttyS0,​115200 root=/​dev/​mtdblock2 rootfstype=squashfs
 +wait instruction:​ enabled
 +Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
 +Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
 +NR_IRQS:128
 +PID hash table entries: 256 (order: 8, 1024 bytes)
 +console [ttyS0] enabled
 +Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
 +Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
 +Memory: 61168k/​64364k available (1874k kernel code, 3176k reserved, 323k data, 108k init, 0k highmem)
 +Calibrating delay loop... 318.46 BogoMIPS (lpj=159232)
 +Mount-cache hash table entries: 512
 +--Kernel Config--
 +  SMP=0
 +  PREEMPT=0
 +  DEBUG_SPINLOCK=0
 +  DEBUG_MUTEXES=0
 +net_namespace:​ 584 bytes
 +NET: Registered protocol family 16
 +registering PCI controller with io_map_base unset
 +registering PCI controller with io_map_base unset
 +bio: create slab <​bio-0>​ at 0
 +usbcore: registered new interface driver usbfs
 +usbcore: registered new interface driver hub
 +usbcore: registered new device driver usb
 +pci 0000:​00:​09.0:​ reg 10 32bit mmio: [0x10002600-0x100026ff]
 +pci 0000:​00:​0a.0:​ reg 10 32bit mmio: [0x10002500-0x100025ff]
 +pci 0000:​01:​00.0:​ PME# supported from D0 D3hot
 +pci 0000:​01:​00.0:​ PME# disabled
 +pci 0000:​02:​00.0:​ reg 10 64bit mmio: [0x000000-0x003fff]
 +pci 0000:​02:​00.0:​ supports D1 D2
 +pci 0000:​01:​00.0:​ PCI bridge, secondary bus 0000:02
 +pci 0000:​01:​00.0: ​  IO window: disabled
 +pci 0000:​01:​00.0: ​  MEM window: 0x10f00000-0x10ffffff
 +pci 0000:​01:​00.0: ​  ​PREFETCH window: disabled
 +PCI: Enabling device 0000:​01:​00.0 (0000 -> 0002)
 +PCI: Setting latency timer of device 0000:​01:​00.0 to 64
 +BLOG Rule v1.0 Initialized
 +Broadcom IQoS v0.1 Jul 20 2011 16:52:32 initialized
 +NET: Registered protocol family 2
 +IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
 +TCP established hash table entries: 2048 (order: 2, 16384 bytes)
 +TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
 +TCP: Hash tables configured (established 2048 bind 2048)
 +TCP reno registered
 +NET: Registered protocol family 1
 +squashfs: version 4.0 (2009/​01/​31) Phillip Lougher
 +squashfs: version 4.0 with LZMA457 ported by BRCM
 +JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
 +msgmni has been set to 119
 +io scheduler noop registered (default)
 +Gateway flash mapping
 +flash mapping initialized
 +Creating 4 MTD partitions on "​thomson-spi":​
 +0x000000040000-0x0000000b0000 : "​userfs"​
 +0x000000020000-0x000000040000 : "​mtdss"​
 +0x000000180000-0x000000800000 : "​rootfs"​
 +0x0000000b0000-0x000000180000 : "​kernel"​
 +brcmboard: brcm_board_init entry
 +Serial: BCM63XX driver $Revision: 3.00 $
 +ttyS0 at MMIO 0xb0000100 (irq = 36) is a BCM63XX
 +ttyS1 at MMIO 0xb0000100 (irq = 36) is a BCM63XX
 +ttyS2 at MMIO 0xb0000120 (irq = 47) is a BCM63XX
 +TCP cubic registered
 +NET: Registered protocol family 17
 +NET: Registered protocol family 15
 +VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
 +Freeing unused kernel memory: 108k freed
 +init started: ​ BusyBox v1.00 (2011.07.20-08:​57+0000) multi-call binary
 +init started: ​ BusyBox v1.00 (2011.07.20-08:​57+0000) multi-call binary
 +Starting pid 111, console /dev/ttyS0: '/​etc/​init.d/​rcS'​
 +Initializing random number generator
 +Mounting encrypted partitions ...
 +insmod: loop.ko: no module by that name found
 +Warning: assuming '​archivefs'​ is on mtdblock3
 +/​etc/​init.d/​cryptomount:​ 25: /​usr/​sbin/​fssetup:​ not found
 +mount: Mounting /dev/loop0 on /archive failed: No such device or address
 +Using /​lib/​modules/​kserport.ko
 +kserport: module license '​unspecified'​ taints kernel.
 +Disabling lock debugging due to kernel taint
 +Using /​nmon/​nmon.ko
 +loading geniodb kernel modules...
 +Using /​lib/​modules/​geniodb.ko
 + ​geniodb driver: Loading ...
 + ​geniodb driver: Loading finished with SUCCESS
 +Button char device has been created and initialized.
 +[BCM ADSL] BcmAdsl_SetOverlayMode = 85 new=0
 +tmm_skb_desc.queuesize = 300
 +queue: 0xc09a3708
 +queue: 0xc09a3708, rp: 0xc09a3708, wp: 0xc09a3708
 +[BCM ADSL] ------ ​   dslFileLoadImage : OverlayMode = 0 fname=ZXD3AA
 +pci 0000:​00:​09.0:​ firmware: requesting ZXD3AA
 +pSdramPHY=0xA3FFFFF8,​ 0x46F57 0xDEBDBEEF
 +[BCM ADSL] Firmware load : 547100 547100 LMEM=(0xB0D80000,​ 41280) SDRAM=(0xA3F00000,​ 505812)
 +pci 0000:​00:​09.0:​ firmware: requesting phy
 +*** PhySdramSize got adjusted: 0x7B7D4 => 0x91368 ***
 +AdslCoreSharedMemInit:​ shareMemAvailable=453744
 +BcmOs_vmalloc : wrong size = 18608
 +AdslCoreHwReset: ​ Failed to calloc for pLocSbSta
 +AdslCoreHwReset: ​ pLocSbSta=0 bkupThreshold=1600
 +AdslCoreHwReset: ​ AdslOemDataAddr = 0xA3F71E48
 +ADSL PHY version is A2pDT001g.d23g
 +b6w_init
 +FOUND WL DEVICE 0, bus=2, device=0, func=0, vendorid=14E4,​ deviceid=A8DC,​ regaddr=10F00000,​ irq=31
 +wl:srom not detected, using main memory mapped srom info(wombo board)
 +veth0 (): not using net_device_ops yet
 +NET: Registered protocol family 3
 +NET: Registered protocol family 9
 +NET: Registered protocol family 6
 +NET: Registered protocol family 4
 +NET: Registered protocol family 5
 +NET: Registered protocol family 18
 +NET: Registered protocol family 25
 +insmod: rawstorage.ko:​ no module by that name found
 +Device ipsec not present.
 +voice will be loaded
 +modprobe: module l2cap not found.
 +modprobe: failed to load module l2cap
 +insmod: rawstorage.ko:​ no module by that name found
 +Device endpoint not present.
 +Device ikanos not present.
 +Starting pid 350, console /dev/ttyS0: '/​etc/​init.d/​rc'​
 +Switching to RUNLEVEL 1 ...
 +Disabling hotplug helper
 +route: SIOC[ADD|DEL]RT:​ File exists
 +linux application start ...
 +wait for linux_appl to initialize (1)
 +wait for linux_appl to initialize (2)
 +
 +************* ERROR RECORD *************
 +000000:​00:​00.000000
 +Application NMON started after POWERON.
 +****************** END *****************
 +
 +appl_init: BUILD VERIFIED!
 +wait for linux_appl to initialize (3)
 +wait for linux_appl to initialize (4)
 +[SS EMUL] ERR: opening config file /​active/​ss.conf failed
 +End of initialisation
 + start fseventd ...
 + ​fseventd is started.
 + start storagepl ...
 + ​storagepl is started
 + start vfspl ...
 + vfspl is started
 +MVFS plugin started
 +cifs plug-in: initializing ...
 + cifs plug-in is started
 +upnpavpl start ...
 +/​usr/​bin/​fusermount
 +Loading fuse modulefuse init (API version 7.11)
 +.
 +Mounting fuse control filesystem.
 +linuxappl: start loading after [  3924ms ]
 +WARNING: Unknown Parameter Type ifmfilter
 +WARNING: Unknown Parameter Type ifmfilter
 +S67stopload:​ wait until configuration load reaches phase 9...
 +S67stopload:​ wait until configuration load reaches phase 9 (now -1, 1s)
 +WARNING: Unknown Parameter Type brgroup
 +WARNING: Unknown Parameter Type brgroup
 +adsl: adsl_open entry
 +ADSL Line state is: DOWN
 +[adsl] trace = 5 0
 +S67stopload:​ wait until configuration load reaches phase 9 (now -1, 2s)
 +The OBC bridge interface cannot be removed from this VLAN, because OBC is defined as untagged.
 +S67stopload:​ wait until configuration load reaches phase 9 (now 3, 3s)
 +S67stopload:​ wait until configuration load reaches phase 9 (now 3, 4s)
 +S67stopload:​ wait until configuration load reaches phase 9 (now 3, 5s)
 +S67stopload:​ wait until configuration load reaches phase 9 (now 3, 6s)
 +S67stopload:​ wait until configuration load reaches phase 9 (now 3, 7s)
 +DyingGasp RIP BIT is set!
 +[ERROR : [DIAG 1004] -1 ]
 +ADSL configuration:​
 +        adslmultimode = adsl2plus
 +        syslog = disabled
 +The OBC bridge interface cannot be removed from this VLAN, because OBC is defined as untagged.
 +S67stopload:​ wait until configuration load reaches phase 9 (now 3, 8s)
 +Failed to add host 58:​98:​35:​9b:​dd:​bc
 +stopping the pureftp-server ...
 +S67stopload:​ wait until configuration load reaches phase 9 (now 3, 9s)
 +the pureftp-server is stopped
 +stopping the pure-authd ...
 +the pure-authd is stopped
 +63xx USB Host Clock disable
 +S67stopload:​ wait until configuration load reaches phase 9 (now 6, 10s)
 +S67stopload:​ wait until configuration load reaches phase 9 (now 6, 11s)
 +S67stopload:​ wait until configuration load reaches phase 9 (now 6, 12s)
 +S67stopload:​ wait until configuration load reaches phase 9 (now 6, 13s)
 +S67stopload:​ wait until configuration load reaches phase 9 (now 6, 14s)
 +S67stopload:​ configuration load reached phase 9...
 +Intel MicroStack 1.0 - Digital Media Server (DLNA 1.5)(pid = 829),
 +
 +loc_generate_uuid:​3a56141b-123b-59e2-9daf-c006d02343a6
 +nlplugd start ...
 +Initializing.
 +Starting netlink plugin
 +Daemonize netlink plugin
 +
 +udhcpcd start ...
 +monitoripd start ...
 +anti_spoofd start ...
 +anti_spoofd : process exit !
 + start mud ...
 +Starting power manager...
 +
 +Username :
 +</​code>​
 +</p>
 +</​HTML>​
 +
 +
 +Board: DANT-1, Software release: 8.4.4.J.BN, Flash image: 8.4.4.19.0, Build name: ZWEUBN8.44J
 <​HTML>​ <​HTML>​
 <p style="​padding:​ 10px;​border:​1px solid grey;​height:​600px;​font:​10px/​14px Georgia, Garamond, Serif;​overflow:​Auto;​background-color:#​FFFFFF">​ <p style="​padding:​ 10px;​border:​1px solid grey;​height:​600px;​font:​10px/​14px Georgia, Garamond, Serif;​overflow:​Auto;​background-color:#​FFFFFF">​
 <​code>​ <​code>​
 +Decompressing Bootloader...............................
  
-PUT HERE YOUR BOOTLOG+Gateway initialization sequence started.
  
 +
 +Version BL: 1.0.1Booting bank 2
 +
 +Multicore disable; Booting Linux kernel
 +
 +BOOTING THE LINUX KERNEL
 +
 +Starting the kernel @ 0x801ddde0 ​
 +Extra parameters passed to Linux:
 + [0]: bootloader
 + [1]: memsize=0x3EDD000
 + [2]: btab=0xc004220c
 + [3]: btab_bootid=2
 +Linux version 2.6.30 (gcc version 3.4.6) #1 Thu Jul 21 17:14:40 CST 2011
 +BCM63XX prom init
 +CPU revision is: 0002a075 (Broadcom4350)
 +Determined physical RAM map:
 + ​memory:​ 03edb000 @ 00002000 (usable)
 +Wasting 64 bytes for tracking 2 unused pages
 +Zone PFN ranges:
 +  DMA      0x00000002 -> 0x00001000
 +  Normal ​  ​0x00001000 -> 0x00003edd
 +Movable zone start PFN for each node
 +early_node_map[1] active PFN ranges
 +    0: 0x00000002 -> 0x00003edd
 +On node 0 totalpages: 16091
 +free_area_init_node:​ node 0, pgdat 80234310, node_mem_map 81000040
 +  DMA zone: 32 pages used for memmap
 +  DMA zone: 0 pages reserved
 +  DMA zone: 4062 pages, LIFO batch:0
 +  Normal zone: 94 pages used for memmap
 +  Normal zone: 11903 pages, LIFO batch:1
 +Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 15965
 +Kernel command line: root=31:0 ro noinitrd memsize=0x3EDD000 btab=0xc004220c btab_bootid=2 console=ttyS0,​115200 root=/​dev/​mtdblock0 rootfstype=squashfs
 +wait instruction:​ enabled
 +Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
 +Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
 +NR_IRQS:128
 +PID hash table entries: 256 (order: 8, 1024 bytes)
 +console [ttyS0] enabled
 +Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
 +Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
 +Memory: 61168k/​64364k available (1874k kernel code, 3176k reserved, 323k data, 108k init, 0k highmem)
 +Calibrating delay loop... 318.46 BogoMIPS (lpj=159232)
 +Mount-cache hash table entries: 512
 +--Kernel Config--
 +  SMP=0
 +  PREEMPT=0
 +  DEBUG_SPINLOCK=0
 +  DEBUG_MUTEXES=0
 +net_namespace:​ 584 bytes
 +NET: Registered protocol family 16
 +registering PCI controller with io_map_base unset
 +registering PCI controller with io_map_base unset
 +bio: create slab <​bio-0>​ at 0
 +usbcore: registered new interface driver usbfs
 +usbcore: registered new interface driver hub
 +usbcore: registered new device driver usb
 +pci 0000:​00:​09.0:​ reg 10 32bit mmio: [0x10002600-0x100026ff]
 +pci 0000:​00:​0a.0:​ reg 10 32bit mmio: [0x10002500-0x100025ff]
 +pci 0000:​01:​00.0:​ PME# supported from D0 D3hot
 +pci 0000:​01:​00.0:​ PME# disabled
 +pci 0000:​02:​00.0:​ reg 10 64bit mmio: [0x000000-0x003fff]
 +pci 0000:​02:​00.0:​ supports D1 D2
 +pci 0000:​01:​00.0:​ PCI bridge, secondary bus 0000:02
 +pci 0000:​01:​00.0: ​  IO window: disabled
 +pci 0000:​01:​00.0: ​  MEM window: 0x10f00000-0x10ffffff
 +pci 0000:​01:​00.0: ​  ​PREFETCH window: disabled
 +PCI: Enabling device 0000:​01:​00.0 (0000 -> 0002)
 +PCI: Setting latency timer of device 0000:​01:​00.0 to 64
 +BLOG Rule v1.0 Initialized
 +Broadcom IQoS v0.1 Jul 21 2011 17:12:42 initialized
 +NET: Registered protocol family 2
 +IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
 +TCP established hash table entries: 2048 (order: 2, 16384 bytes)
 +TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
 +TCP: Hash tables configured (established 2048 bind 2048)
 +TCP reno registered
 +NET: Registered protocol family 1
 +squashfs: version 4.0 (2009/​01/​31) Phillip Lougher
 +squashfs: version 4.0 with LZMA457 ported by BRCM
 +JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
 +msgmni has been set to 119
 +io scheduler noop registered (default)
 +Gateway flash mapping
 +flash mapping initialized
 +parse_btab: num_banks (5)
 +bank #0: 0, 80000 (<​NULL>​)
 +bank #1: 0, 100000 (<​NULL>​)
 +bank #2: 0, 880000 (<​NULL>​)
 +bank #3: 0, 20000 (<​NULL>​)
 +bank #4: 0, 40000 (<​NULL>​)
 +Creating 1 MTD partitions on "​thomson-spi":​
 +0x000000970000-0x000001000000 : "​rootfs"​
 +Creating 5 MTD partitions on "​thomson-spi":​
 +0x000000080000-0x000000100000 : "​userfs"​
 +0x000000100000-0x000000880000 : "​bank_1"​
 +0x000000880000-0x000001000000 : "​bank_2"​
 +0x000000020000-0x000000040000 : "​mtdss"​
 +0x000000040000-0x000000080000 : "​rawstorage"​
 +brcmboard: brcm_board_init entry
 +Serial: BCM63XX driver $Revision: 3.00 $
 +ttyS0 at MMIO 0xb0000100 (irq = 36) is a BCM63XX
 +ttyS1 at MMIO 0xb0000100 (irq = 36) is a BCM63XX
 +ttyS2 at MMIO 0xb0000120 (irq = 47) is a BCM63XX
 +TCP cubic registered
 +NET: Registered protocol family 17
 +NET: Registered protocol family 15
 +VFS: Mounted root (squashfs filesystem) readonly on device 31:0.
 +Freeing unused kernel memory: 108k freed
 +init started: ​ BusyBox v1.00 (2011.07.21-09:​16+0000) multi-call binary
 +init started: ​ BusyBox v1.00 (2011.07.21-09:​16+0000) multi-call binary
 +Starting pid 117, console /dev/ttyS0: '/​etc/​init.d/​rcS'​
 +Initializing random number generator
 +Mounting encrypted partitions ...
 +insmod: loop.ko: no module by that name found
 +Warning: assuming '​archivefs'​ is on mtdblock3
 +/​etc/​init.d/​cryptomount:​ 25: /​usr/​sbin/​fssetup:​ not found
 +mount: Mounting /dev/loop0 on /archive failed: No such device or address
 +Using /​lib/​modules/​kserport.ko
 +kserport: module license '​unspecified'​ taints kernel.
 +Disabling lock debugging due to kernel taint
 +Using /​nmon/​nmon.ko
 +loading geniodb kernel modules...
 +Using /​lib/​modules/​geniodb.ko
 + ​geniodb driver: Loading ...
 + ​geniodb driver: Loading finished with SUCCESS
 +Button char device has been created and initialized.
 +[BCM ADSL] BcmAdsl_SetOverlayMode = 85 new=0
 +tmm_skb_desc.queuesize = 300
 +queue: 0xc09a3708
 +queue: 0xc09a3708, rp: 0xc09a3708, wp: 0xc09a3708
 +[BCM ADSL] ------ ​   dslFileLoadImage : OverlayMode = 0 fname=ZXD3AA
 +pci 0000:​00:​09.0:​ firmware: requesting ZXD3AA
 +pSdramPHY=0xA3FFFFF8,​ 0x0 0x0
 +[BCM ADSL] Firmware load : 547100 547100 LMEM=(0xB0D80000,​ 41280) SDRAM=(0xA3F00000,​ 505812)
 +pci 0000:​00:​09.0:​ firmware: requesting phy
 +*** PhySdramSize got adjusted: 0x7B7D4 => 0x91368 ***
 +AdslCoreSharedMemInit:​ shareMemAvailable=453744
 +BcmOs_vmalloc : wrong size = 18608
 +AdslCoreHwReset: ​ Failed to calloc for pLocSbSta
 +AdslCoreHwReset: ​ pLocSbSta=0 bkupThreshold=1600
 +AdslCoreHwReset: ​ AdslOemDataAddr = 0xA3F71E48
 +ADSL PHY version is A2pDT001g.d23g
 +b6w_init
 +FOUND WL DEVICE 0, bus=2, device=0, func=0, vendorid=14E4,​ deviceid=A8DC,​ regaddr=10F00000,​ irq=31
 +wl:srom not detected, using main memory mapped srom info(wombo board)
 +veth0 (): not using net_device_ops yet
 +NET: Registered protocol family 3
 +NET: Registered protocol family 9
 +NET: Registered protocol family 6
 +NET: Registered protocol family 4
 +NET: Registered protocol family 5
 +NET: Registered protocol family 18
 +NET: Registered protocol family 25
 +Using /​lib/​modules/​2.6.30/​extra/​rawstorage.ko
 +Device ipsec not present.
 +voice will be loaded
 +modprobe: module l2cap not found.
 +modprobe: failed to load module l2cap
 +Using /​lib/​modules/​2.6.30/​extra/​rawstorage.ko
 +insmod: cannot insert `/​lib/​modules/​2.6.30/​extra/​rawstorage.ko':​ Success (17): Success
 +Device endpoint not present.
 +Device ikanos not present.
 +Starting pid 360, console /dev/ttyS0: '/​etc/​init.d/​rc'​
 +Switching to RUNLEVEL 1 ...
 +Disabling hotplug helper
 +route: SIOC[ADD|DEL]RT:​ File exists
 +linux application start ...
 +wait for linux_appl to initialize (1)
 +wait for linux_appl to initialize (2)
 +
 +************* ERROR RECORD *************
 +000000:​00:​00.000000
 +Application NMON started after POWERON.
 +****************** END *****************
 +wait for linux_appl to initialize (3)
 +
 +appl_init: BUILD VERIFIED!
 +wait for linux_appl to initialize (4)
 +open_mtd: bank_1
 +open_mtd: => /dev/mtd4
 +get upgrade config for bank #1 : OK
 +[SS EMUL] ERR: opening config file /​active/​ss.conf failed
 +End of initialisation
 + start fseventd ...
 + ​fseventd is started.
 + start storagepl ...
 + ​storagepl is started ​
 + start vfspl ...
 + vfspl is started ​
 +MVFS plugin started
 +cifs plug-in: initializing ...
 + cifs plug-in is started ​
 +upnpavpl start ...
 +/​usr/​bin/​fusermount
 +Loading fuse modulefuse init (API version 7.11)
 +.
 +Mounting fuse control filesystem.
 +linuxappl: start loading after [  3397ms ]
 +WARNING: Unknown Parameter Type ifmfilter
 +WARNING: Unknown Parameter Type ifmfilter
 +S67stopload:​ wait until configuration load reaches phase 9...
 +S67stopload:​ wait until configuration load reaches phase 9 (now -1, 1s)
 +WARNING: Unknown Parameter Type brgroup
 +WARNING: Unknown Parameter Type brgroup
 +adsl: adsl_open entry
 +ADSL Line state is: DOWN 
 +[adsl] trace = 5 0
 +S67stopload:​ wait until configuration load reaches phase 9 (now -1, 2s)
 +The OBC bridge interface cannot be removed from this VLAN, because OBC is defined as untagged.
 +S67stopload:​ wait until configuration load reaches phase 9 (now -1, 3s)
 +S67stopload:​ wait until configuration load reaches phase 9 (now 3, 4s)
 +S67stopload:​ wait until configuration load reaches phase 9 (now 3, 5s)
 +S67stopload:​ wait until configuration load reaches phase 9 (now 3, 6s)
 +S67stopload:​ wait until configuration load reaches phase 9 (now 3, 7s)
 +ADSL configuration:​
 + adslmultimode = adsl2plus ​
 + syslog = disabled ​
 +ADSL configuration:​
 + adslmultimode = adsl2plus ​
 + syslog = disabled ​
 +Invalid interface name specified ​
 +Bad value for parameter 'intf Be_3G_Dongle' ​
 +Bad value for parameter '​dstintf mobile' ​
 +S67stopload:​ wait until configuration load reaches phase 9 (now 3, 8s)
 +Invalid service name: SNMP_AGENT.
 +Bad value for parameter 'name SNMP_AGENT' ​
 +stopping the pureftp-server ... 
 +the pureftp-server is stopped
 +stopping the pure-authd ...
 +the pure-authd is stopped
 +S67stopload:​ wait until configuration load reaches phase 9 (now 6, 9s)
 +S67stopload:​ wait until configuration load reaches phase 9 (now 6, 10s)
 +S67stopload:​ wait until configuration load reaches phase 9 (now 6, 11s)
 +S67stopload:​ configuration load reached phase 9...
 +nlplugd start ...
 +Intel MicroStack 1.0 - Digital Media Server (DLNA 1.5)(pid = 823),
 +
 +loc_generate_uuid:​4a66457e-89f9-5f37-9bf1-641ce4861999
 +Initializing.
 +Starting netlink plugin
 +Daemonize netlink plugin
 +
 +udhcpcd start ...
 +monitoripd start ...
 +anti_spoofd start ...
 +anti_spoofd : process exit !
 + start mud ...
 +Using /​lib/​modules/​2.6.30/​kernel/​drivers/​usb/​host/​ehci-hcd.ko
 +ehci_hcd: USB 2.0 '​Enhanced'​ Host Controller (EHCI) Driver
 +PCI: Enabling device 0000:​00:​0a.0 (0000 -> 0002)
 +PCI: Setting latency timer of device 0000:​00:​0a.0 to 64
 +ehci_hcd 0000:​00:​0a.0:​ EHCI Host Controller
 +ehci_hcd 0000:​00:​0a.0:​ new USB bus registered, assigned bus number 1
 +ehci_hcd 0000:​00:​0a.0:​ Enabling legacy PCI PM
 +ehci_hcd 0000:​00:​0a.0:​ irq 50, io mem 0x10002500
 +ehci_hcd 0000:​00:​0a.0:​ USB f.f started, EHCI 1.00
 +usb usb1: configuration #1 chosen from 1 choice
 +hub 1-0:1.0: USB hub found
 +hub 1-0:1.0: 1 port detected
 +Using /​lib/​modules/​2.6.30/​kernel/​drivers/​usb/​host/​ohci-hcd.ko
 +ohci_hcd: USB 1.1 '​Open'​ Host Controller (OHCI) Driver
 +PCI: Enabling device 0000:​00:​09.0 (0000 -> 0002)
 +PCI: Setting latency timer of device 0000:​00:​09.0 to 64
 +ohci_hcd 0000:​00:​09.0:​ OHCI Host Controller
 +ohci_hcd 0000:​00:​09.0:​ new USB bus registered, assigned bus number 2
 +ohci_hcd 0000:​00:​09.0:​ irq 49, io mem 0x10002600
 +usb usb2: configuration #1 chosen from 1 choice
 +hub 2-0:1.0: USB hub found
 +hub 2-0:1.0: 1 port detected
 +Using /​lib/​modules/​2.6.30/​kernel/​drivers/​usb/​class/​usblp.ko
 +usbcore: registered new interface driver usblp
 +Using /​lib/​modules/​2.6.30/​kernel/​drivers/​usb/​serial/​usbserial.ko
 +usbcore: registered new interface driver usbserial
 +USB Serial support registered for generic
 +usbcore: registered new interface driver usbserial_generic
 +usbserial: USB Serial Driver core
 +modprobe: module cp210x not found.
 +modprobe: failed to load module cp210x
 +Using /​lib/​modules/​2.6.30/​kernel/​drivers/​scsi/​scsi_mod.ko
 +SCSI subsystem initialized
 +Using /​lib/​modules/​2.6.30/​kernel/​drivers/​scsi/​sd_mod.ko
 +Driver '​sd'​ needs updating - please use bus_type methods
 +Using /​lib/​modules/​2.6.30/​kernel/​drivers/​usb/​storage/​usb-storage.ko
 +Initializing USB Mass Storage driver...
 +usbcore: registered new interface driver usb-storage
 +USB Mass Storage support registered.
 +Using /​lib/​modules/​2.6.30/​kernel/​fs/​fat/​fat.ko
 +Using /​lib/​modules/​2.6.30/​kernel/​fs/​fat/​vfat.ko
 +modprobe: module msdos not found.
 +modprobe: failed to load module msdos
 +Using /​lib/​modules/​2.6.30/​kernel/​fs/​nls/​nls_cp437.ko
 +Using /​lib/​modules/​2.6.30/​kernel/​fs/​nls/​nls_iso8859-1.ko
 +Using /​lib/​modules/​2.6.30/​kernel/​fs/​nls/​nls_cp850.ko
 +mount all usbdisks not implemented !
 +Name: /​etc/​usbmgr/​usbmgr.conf
 +Starting power manager...
 +
 +Username :
 </​code>​ </​code>​
 </p> </p>
Line 265: Line 815:
 <​code>​ <​code>​
  
-PUT HERE YOUR BOOTLOG+Resetting board...HELO 
 +CPUI 
 +L1CI 
 +DRAM 
 +---- 
 +PHYS 
 +ZQDN 
 +PHYE 
 +DINT 
 +LSYN 
 +USYN 
 +MSYN 
 +LMBE 
 +PASS 
 +---- 
 +ZBSS 
 +CODE 
 +DATA 
 +L12F 
 +MAIN 
 + 
 + 
 +CFE version 2.0.3 for DGN2200v2 (32bit,​SP,​BE) 
 +Build Date: Mon May 25 14:29:46 BST 2015 (aspeed@ubuntu1504) 
 +Copyright (C) 2000-2009 Broadcom Corporation. 
 + 
 +HS Serial flash device: name EN25P128, id 0x1c18 size 16384KB 
 +Total Flash size: 16384K with 256 sectors 
 +Chip ID: BCM6328B0, MIPS: 320MHz, DDR: 320MHz, Bus: 160MHz 
 +Main Thread: TP0 
 +Memory Test Passed 
 +Total Memory: 67108864 bytes (64MB) 
 +Boot Address: 0xb8000000 
 + 
 +Board IP address ​                 : 192.168.1.1:​ffffff00 
 +Host IP address ​                  : 192.168.1.100 
 +Gateway IP address ​               : 
 +Run from flash/host (f/h)         : f 
 +Default host run file name        : vmlinux 
 +Default host flash file name      : bcm963xx_fs_kernel 
 +Boot delay (0-9 seconds) ​         : 1 
 +Board Id (0-3)                    : 963281TAN 
 +Number of MAC Addresses (1-32) ​   : 10 
 +Base MAC Address ​                 : a4:​b1:​e9:​3c:​7e:​5a 
 +PSI Size (1-64) KBytes ​           : 24 
 +Enable Backup PSI [0|1]           : 0 
 +System Log Size (0-256) KBytes ​   : 0 
 +Main Thread Number [0|1]          : 0 
 + 
 +*** Press any key to stop auto run (1 seconds) *** 
 +Auto run second count down: 0 
 +*** Press any key to stop auto run (1 seconds) *** 
 +Auto run second count down: 0 
 +Booting from only image (0xb8010000) ... 
 +Code Address: 0x80A00000, Entry Address: 0x80a00000 
 +LZMA: Prossible old LZMA format, trying to decompress.. 
 +Decompression OK! 
 +Entry at 0x80a00000 
 +Closing network. 
 +Disabling Switch ports. 
 +Flushing Receive Buffers... 
 +1 buffers found. 
 +Closing DMA Channels. 
 +Starting program at 0x80a00000 
 +Linux version 3.18.14 (aspeed@ubuntu1504) (gcc version 4.8.3 (OpenWrt/​Linaro GCC 4.8-2014.04 r45712) ) #2 Wed Jun 3 11:56:16 BST 2015 
 +Detected Broadcom 0x6328 CPU revision b0 
 +CPU frequency is 320 MHz 
 +64MB of RAM installed 
 +board_bcm963xx:​ Boot address 0xb8000000 
 +board_bcm963xx:​ CFE version: 1.0.37-106.24 
 +bootconsole [early0] enabled 
 +CPU0 revision is: 0002a075 (Broadcom BMIPS4350) 
 +board: board name: TG582N 
 +MIPS: machine is TG582N 
 +Determined physical RAM map: 
 + ​memory:​ 04000000 @ 00000000 (usable) 
 +Initrd not found or empty - disabling initrd 
 +Zone ranges: 
 +  Normal ​  [mem 0x00000000-0x03ffffff] 
 +Movable zone start for each node 
 +Early memory node ranges 
 +  node   0: [mem 0x00000000-0x03ffffff] 
 +Initmem setup node 0 [mem 0x00000000-0x03ffffff] 
 +Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes. 
 +Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes 
 +Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256 
 +Kernel command line:  root=/​dev/​mtdblock2 rootfstype=squashfs,​jffs2 noinitrd console=ttyS0,​115200 
 +PID hash table entries: 256 (order: -2, 1024 bytes) 
 +Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) 
 +Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) 
 +Memory: 60292K/​65536K available (2531K kernel code, 131K rwdata, 476K rodata, 1204K init, 192K bss, 5244K reserved) 
 +NR_IRQS:​256 
 +Calibrating delay loop... 319.74 BogoMIPS (lpj=639488) 
 +pid_max: default: 32768 minimum: 301 
 +Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) 
 +NET: Registered protocol family 16 
 +registering PCI controller with io_map_base unset 
 +PCI host bridge to bus 0000:00 
 +pci_bus 0000:00: root bus resource [mem 0x10f00000-0x10ffffff] 
 +pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] 
 +pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] 
 +pci 0000:​00:​00.0:​ bridge configuration invalid ([bus 00-00]), reconfiguring 
 +pci 0000:​00:​00.0:​ BAR 8: assigned [mem 0x10f00000-0x10ffffff] 
 +pci 0000:​01:​00.0:​ BAR 0: assigned [mem 0x10f00000-0x10f03fff 64bit] 
 +pci 0000:​00:​00.0:​ PCI bridge to [bus 01] 
 +pci 0000:​00:​00.0: ​  ​bridge window [mem 0x10f00000-0x10ffffff] 
 +Switched to clocksource MIPS 
 +PCI: Enabling device 0000:​00:​00.0 (0000 -> 0002) 
 +PCI: Enabling device 0000:​01:​00.0 (0000 -> 0002) 
 +bcma: bus0: Found chip with id 43227, rev 0x00 and package 0x08 
 +bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0) 
 +bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0) 
 +bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x12, class 0x0) 
 +bcma: bus0: Core 3 found: SDIO Device (manuf 0x4BF, id 0x829, rev 0x07, class 0x0) 
 +bcma: bus0: Bus registered 
 +NET: Registered protocol family 2 
 +TCP established hash table entries: 1024 (order: 0, 4096 bytes) 
 +TCP bind hash table entries: 1024 (order: 0, 4096 bytes) 
 +TCP: Hash tables configured (established 1024 bind 1024) 
 +TCP: reno registered 
 +UDP hash table entries: 256 (order: 0, 4096 bytes) 
 +UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) 
 +NET: Registered protocol family 1 
 +futex hash table entries: 256 (order: -1, 3072 bytes) 
 +squashfs: version 4.0 (2009/​01/​31) Phillip Lougher 
 +jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 
 +msgmni has been set to 117 
 +io scheduler noop registered 
 +io scheduler deadline registered (default) 
 +bcm63xx_uart.0:​ ttyS0 at MMIO 0xb0000100 (irq = 36, base_baud = 1562500) is a bcm63xx_uart 
 +console [ttyS0] enabled 
 +console [ttyS0] enabled 
 +bootconsole [early0] disabled 
 +bootconsole [early0] disabled 
 +m25p80 spi1.0: found en25q128, expected m25p80 
 +m25p80 spi1.0: en25q128 (16384 Kbytes) 
 +bcm63xxpart:​ CFE boot tag found with version 6 and board type 963281T_TEF 
 +bcm63xxpart:​ Partition 0 is CFE offset 0 and length 10000 
 +bcm63xxpart:​ Partition 1 is kernel offset 10100 and length 1135a8 
 +bcm63xxpart:​ Partition 2 is rootfs offset 1236a8 and length ecc958 
 +bcm63xxpart:​ Partition 3 is nvram offset ff0000 and length 10000 
 +bcm63xxpart:​ Partition 4 is linux offset 10000 and length fe0000 
 +5 bcm63xxpart partitions found on MTD device spi1.0 
 +Creating 5 MTD partitions on "​spi1.0":​ 
 +0x000000000000-0x000000010000 : "​CFE"​ 
 +0x000000010100-0x0000001236a8 : "​kernel"​ 
 +0x0000001236a8-0x000000ff0000 : "​rootfs"​ 
 +mtd: device 2 (rootfs) set to be root filesystem 
 +1 squashfs-split partitions found on MTD device rootfs 
 +0x0000006d0000-0x000000ff0000 : "​rootfs_data"​ 
 +0x000000ff0000-0x000001000000 : "​nvram"​ 
 +0x000000010000-0x000000ff0000 : "​linux"​ 
 +b53_common: found switch: BCM63xx, rev 0 
 +bcm63xx-wdt bcm63xx-wdt: ​ started, timer margin: 30 sec 
 +TCP: cubic registered 
 +NET: Registered protocol family 17 
 +bridge: automatic filtering via arp/​ip/​ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. 
 +8021q: 802.1Q VLAN Support v1.8 
 +VFS: Mounted root (squashfs filesystem) readonly on device 31:2. 
 +Freeing unused kernel memory: 1204K (80323000 - 80450000) 
 +init: Console is alive 
 +init: - watchdog - 
 +random: nonblocking pool is initialized 
 +usbcore: registered new interface driver usbfs 
 +usbcore: registered new interface driver hub 
 +usbcore: registered new device driver usb 
 +SCSI subsystem initialized 
 +ehci_hcd: USB 2.0 '​Enhanced'​ Host Controller (EHCI) Driver 
 +ehci-platform:​ EHCI generic platform driver 
 +ehci-platform ehci-platform:​ EHCI Host Controller 
 +ehci-platform ehci-platform:​ new USB bus registered, assigned bus number 1 
 +ehci-platform ehci-platform:​ irq 50, io mem 0xb0002500 
 +ehci-platform ehci-platform:​ USB 2.0 started, EHCI 1.00, overcurrent ignored 
 +hub 1-0:1.0: USB hub found 
 +hub 1-0:1.0: 1 port detected 
 +ehci-pci: EHCI PCI platform driver 
 +usbcore: registered new interface driver usb-storage 
 +input: gpio-keys-polled as /​devices/​gpio-keys-polled/​input/​input0 
 +init: - preinit - 
 +Press the [f] key and hit [enter] to enter failsafe mode 
 +Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level 
 +mount_root: loading kmods from internal overlay 
 +block: attempting to load /​etc/​config/​fstab 
 +block: unable to load configuration (fstab: Entry not found) 
 +block: no usable configuration 
 +mount_root: jffs2 not ready yet, using temporary tmpfs overlay 
 +ifconfig: SIOCGIFFLAGS:​ No such device 
 +procd: - early - 
 +procd: - watchdog - 
 +procd: - ubus - 
 +procd: - init - 
 +Please press Enter to activate this console. 
 +NET: Registered protocol family 10 
 +NET: Registered protocol family 8 
 +NET: Registered protocol family 20 
 +device-mapper:​ ioctl: 4.28.0-ioctl (2014-09-17) initialised:​ dm-devel@redhat.com 
 +RPC: Registered named UNIX socket transport module. 
 +RPC: Registered udp transport module. 
 +RPC: Registered tcp transport module. 
 +RPC: Registered tcp NFSv4.1 backchannel transport module. 
 +Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) 
 +Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 
 +PPP generic driver version 2.4.2 
 +ip6_tables: (C) 2000-2006 Netfilter Core Team 
 +Loading modules backported from Linux version master-2015-03-09-0-g141f155 
 +Backport generated by backports.git backports-20150129-0-gdd4a670 
 +ip_tables: (C) 2000-2006 Netfilter Core Team 
 +nf_conntrack version 0.5.0 (960 buckets, 3840 max) 
 +NET: Registered protocol family 24 
 +xt_time: kernel timezone is -0000 
 +cfg80211: Calling CRDA to update world regulatory domain 
 +cfg80211: World regulatory domain updated: 
 +cfg80211: ​ DFS Master region: unset 
 +cfg80211: ​  ​(start_freq - end_freq @ bandwidth), (max_antenna_gain,​ max_eirp), (dfs_cac_time) 
 +cfg80211: ​  ​(2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) 
 +cfg80211: ​  ​(2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) 
 +cfg80211: ​  ​(2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) 
 +cfg80211: ​  ​(5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) 
 +cfg80211: ​  ​(5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) 
 +cfg80211: ​  ​(5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) 
 +cfg80211: ​  ​(5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) 
 +cfg80211: ​  ​(57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) 
 +b43-phy0: Broadcom 43227 WLAN found (core revision 30) 
 +b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 16 
 +b43-phy0: Found Radio: Manuf 0x17F, ID 0x2057, Revision 9, Version 1 
 +Broadcom 43xx driver loaded [ Features: PNL ] 
 +bcm63xx_enetsw bcm63xx_enetsw.0:​ link UP on Port 1, 10Mbps, half-duplex 
 +jffs2_scan_eraseblock():​ End of filesystem marker found at 0x0 
 +jffs2_build_filesystem():​ unlocking the mtd device... done. 
 +jffs2_build_filesystem():​ erasing all blocks after the end marker... 
 + 
 + 
 +BusyBox v1.23.2 (2015-06-03 11:49:25 BST) built-in shell (ash) 
 + 
 +  _______ ​                    ​________ ​       __ 
 + ​| ​      ​|.-----.-----.-----.| ​ |  |  |.----.| ​ |_ 
 + ​| ​  ​- ​  ​|| ​ _  |  -__|     ​|| ​ |  |  ||   ​_|| ​  _| 
 + ​|_______|| ​  ​__|_____|__|__||________||__| ​ |____| 
 +          |__| W I R E L E S S   F R E E D O M 
 + ​----------------------------------------------------- 
 + CHAOS CALMER (Bleeding Edge, r45856) 
 + ​----------------------------------------------------- 
 +  * 1 1/2 oz Gin            Shake with a glassful 
 +  * 1/4 oz Triple Sec       of broken ice and pour 
 +  * 3/4 oz Lime Juice       ​unstrained into a goblet. 
 +  * 1 1/2 oz Orange Juice 
 +  * 1 tsp. Grenadine Syrup 
 + ​----------------------------------------------------- 
 +root@OpenWrt:/#​
  
 </​code>​ </​code>​
Line 278: Line 1077:
 For some Help with the Tags, please have a look here: [[meta/​tags]] For some Help with the Tags, please have a look here: [[meta/​tags]]
  
-{{tag>​FastEthernet 1NIC 1WNIC 4Port USB 64RAM 8Flash 16Flash MIPS}}+{{tag>bcm63xx bcm6328 ​FastEthernet 1NIC 1WNIC 4Port USB 64RAM 8Flash 16Flash MIPS}}
toh/thomson/tg582n.1382428079.txt.bz2 · Last modified: 2013/10/22 09:47 (external edit)