Differences

This shows you the differences between two versions of the page.

toh:tp-link:olinuxino [2012/11/07 13:03]
wigyori
— (current)
Line 1: Line 1:
-====== Olimex IMX233 (OLinuXino) ====== 
-The Olinuxino is a low-cost development board for applications like point-of-sale terminals. It comes in different buildouts, all include a microSD slot to boot the OS from. 
- 
-====== Supported Versions ====== 
-^ Model Version ^ Launch Date ^ OpenWrt Version Supported ^ Model Specific Notes ^ 
-| v1 | - | BB | WiP | 
- 
-====== Hardware Highlights ====== 
-^ CPU ^ Ram ^ Flash ^ Network ^ USB ^ Serial ^ JTag ^ UEXT ^ 
-| Freescale i.MX233 | 64 MiB | None | 1x FE, depends on model | yes | Yes | No | Depends on model | 
- 
-UEXT is an open standard port to provide serial, I2C and SPI expansion ports. 
- 
-  * IMX233-MAXI 
- 
-Ethernet, 2 USB, UEXT, TV-out 
- 
-  * IMX233-MICRO 
- 
-1 USB, TV-out 
- 
-  * IMX233-MINI 
- 
-3 USB, UEXT, TV-out 
- 
-  * IMX233-MINI-WIFI 
- 
-Optional RTL8188 WIFI, 3 USB, UEXT, TV-out 
- 
- 
-===== Installation ===== 
- 
-This section details what is required to install and upgrade OpenWrt.  First we link to software that you should download before you start reading the instructions on how to install. 
- 
-*This is a WiP board. No snapshot or release is complete yet.* 
- 
-  * Partition the SD card 
- 
-We assume /dev/sdc is the SD card. 
- 
-<code> 
-# fdisk /dev/sdc1 
-Command (m for help): n 
-Partition type: 
-  p  primary (0 primary, 0 extended, 4 free) 
-  e  extended 
-Select (default p): p 
-Partition number (1-4, default 1): 1 
-First sector (2048-7626751, default 2048): 
-Using default value 2048 
-Last sector, +sectors or +size{K,M,G} (2048-7626751, default 7626751): +16MB 
-Partition 1 of type Linux and of size 15.3 MiB is set 
- 
-Command (m for help): t 
-Selected partition 1 
-Hex code (type L to list codes): 53 
-Changed system type of partition 1 to 53 (OnTrack DM6 Aux3) 
- 
-Command (m for help): n 
-Partition type: 
-  p  primary (1 primary, 0 extended, 3 free) 
-  e  extended 
-Select (default p): 
-Using default response p 
-Partition number (1-4, default 2): 
-Using default value 2 
-First sector (33298-7626751, default 33298): 
-Using default value 33298 
-Last sector, +sectors or +size{K,M,G} (33298-7626751, default 7626751): 
-Using default value 7626751 
-Partition 2 of type Linux and of size 3.6 GiB is set 
- 
-Command (m for help): w 
-The partition table has been altered! 
- 
-Calling ioctl() to re-read partition table. 
-Syncing disks. 
-</code> 
- 
-  * Copy the kernel and the rootfs to the SD card 
- 
-<code> 
-# dd if=openwrt-imx23-sbImage of=/dev/sdc1 
-[...] 
- 
-# dd if=openwrt-imx23-squashfs of=/dev/sdc2 
-[...] 
- 
-# 
- 
-</code> 
- 
- 
- 
- 
-==== Upgrading OpenWRT ==== 
- 
-*WiP* 
- 
-If you have already installed OpenWrt and like to reflash for e.g. upgrading to a new OpenWrt version you can upgrade using the mtd command line tool. It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing. 
- 
-==== Serial for IMX-233-MAXI ==== 
- 
-You can use your usual serial levelshifter. Pinout is: 
- 
-<code> 
-[UEXT] 
- 
- o o o o 
- 
-[USB/ethernet] 
- 
-</code> 
- 
-==== Further notes ==== 
- 
-The board uses a special boot image called bootstream / safeboot. The file includes a zImage, a compiled devicetree, and various preparation bootlets (power_, sdram_, linux_)- these are contained in package/imx-bootlets. The image is created by the elftosb tool. 
- 
-A U-boot is being prepared by various people to replace the bootlets to enable easier debugging and further functions in the boot process. 
- 
-====Links==== 
- 
- 
-[[http://trabant.uid0.hu/openwrt/IMX23_ROM_Error_Codes.pdf|i.MX23 ROM error codes]] 
- 
-===== Tags ===== 
----- 
-{{tag>FastEthernet Serial integrated ARM}} 

Back to top

toh/tp-link/olinuxino.1352289815.txt.bz2 · Last modified: 2012/11/07 13:03 by wigyori