Differences
This shows you the differences between two versions of the page.
|
toh:tp-link:tl-wdr3600 [2013/02/19 16:44] mandrawes |
toh:tp-link:tl-wdr3600 [2013/04/27 21:06] (current) jamest42 |
||
|---|---|---|---|
| Line 6: | Line 6: | ||
| ^ Version/Model ^Release Date ^ OpenWrt Version Supported ^ Model Specific Notes ^ | ^ Version/Model ^Release Date ^ OpenWrt Version Supported ^ Model Specific Notes ^ | ||
| | 1.1 | 2012/07| trunk [[https://dev.openwrt.org/changeset/33219|r33219]] | Similar to [[.:TL-WDR4300|TP-Link TL-WDR4300]] | | | 1.1 | 2012/07| trunk [[https://dev.openwrt.org/changeset/33219|r33219]] | Similar to [[.:TL-WDR4300|TP-Link TL-WDR4300]] | | ||
| + | |||
| + | The latest firmware available is the release build [[http://downloads.openwrt.org/attitude_adjustment/12.09/ar71xx/generic/|Attitude Adjustment 12.09]] or the trunk build [[http://downloads.openwrt.org/snapshots/trunk/ar71xx/|Barrier Breaker]], with working ethernet and dual-band wireless (disabled by default). If your wireless cannot be enabled when using wide channel modes, this may be due to the friendly neighbour "feature" that prohibits operation of such a mode and you may have to use the standard modes before wireless can be enabled. | ||
| ==== Info ==== | ==== Info ==== | ||
| Line 18: | Line 20: | ||
| | **Wireless:** | Atheros AR9340 2.4GHz 802.11bgn | Atheros AR9582 5GHz 802.11an | | | **Wireless:** | Atheros AR9340 2.4GHz 802.11bgn | Atheros AR9582 5GHz 802.11an | | ||
| | **Ethernet:** | Atheros AR8327N Gigabit Switch | | | **Ethernet:** | Atheros AR8327N Gigabit Switch | | ||
| - | | **USB:** | Yes 2 x 2.0 | | + | | **USB:** | Yes 2 x 2.0 (GL850G chip - 4 port's capable) | |
| ==== Switch Ports (for VLANs) ==== | ==== Switch Ports (for VLANs) ==== | ||
| Line 30: | Line 32: | ||
| | LAN 4 | 5 | | | LAN 4 | 5 | | ||
| | unknown | 6 | | | unknown | 6 | | ||
| + | |||
| + | ==== Hardware Modifications ==== | ||
| + | |||
| + | |||
| + | === USB Modification === | ||
| + | |||
| + | The task was to make ext-root without using the default ports. | ||
| + | |||
| + | It turns out that the GL850G chipset used by the TP-Link in WDR3600/4300/4900 models can handle up to four ports. | ||
| + | |||
| + | {{:media:gl850g.png|}} | ||
| + | |||
| + | Analysing the router's PCB it appears that pins 8(D-), 9(D+), 11(D-) and 12(D+) are unused. | ||
| + | Aditionaly each factory USB port has separate power section. | ||
| + | |||
| + | GND is at the TP7 pin point. +5 V was taken directly from the MOSFET. | ||
| + | |||
| + | {{:media:tplinkwrd3600-usbmod-small.jpg|}} | ||
| + | {{:media:tplinkwrd3600-usbmod1-small.jpg|}} | ||
| ==== Photos ==== | ==== Photos ==== | ||
toh/tp-link/tl-wdr3600.1361288652.txt.bz2 · Last modified: 2013/02/19 16:44 by mandrawes