Table of Contents
TP-Link TL-WR1041ND
The TL-WR1041N/ND is a Low-Cost Gigabit Ethernet 2.4Ghz-band dual-stream (2x2) 300mbps wireless router.
Supported Versions
| Version/Model | Release Date | OpenWrt Version Supported | Model Specific Notes |
|---|---|---|---|
| v2.0 | - | trunk since R31609 | - |
Hardware Highlights
| CPU | Flash | RAM | Network | USB | Serial | JTag |
|---|---|---|---|---|---|---|
| Atheros AR9342 Rev 1 @ 525 Mhz | 4MiB | 32MiB | 4 x 1 | Mod | Yes | Yes |
Hardware
| Architecture: | MIPS |
| Vendor: | Qualcomm Atheros |
| Bootloader: | U-Boot |
| System-On-Chip: | Atheros AR9342 |
| CPU/Speed | 525 Mhz |
| Flash-Chip: | cFeon Q32B-104HIP |
| Flash size: | 4096 KiB |
| RAM: | Winbond W9425G6JH-5 |
| Wireless: | Atheros AR9340 |
| Ethernet: | Atheros (integrated) |
| Switch: | Atheros AR8327 |
| USB: | Mod |
| Serial: | Yes |
| JTAG: | Yes |
OEM easy installation
Install openwrt-ar71xx-tl-wr1041n-v2-squashfs-factory.bin using the "Firmware Upgrade" page of web interface of the original firmware.
- Enjoy
Photos
The Board
Serial/TTL Port
Blank USB Header
Tags
toh/tp-link/tl-wr1041nd.txt · Last modified: 2012/08/28 10:58 by jow