User Tools

Site Tools


toh:tp-link:tl-wr1043nd:flashlog

Serial log of flash procedure

U-Boot 1.1.4 (Nov 17 2009 - 11:56:26) AP83 (ar9100) U-boot 0.0.11 DRAM: sri 32 MB id read 0x100000ff flash size 8MB, sector count = 128 Flash: 8 MB Using default environment In: serial Out: serial Err: serial Net: ag7100_enet_initialize… No valid address in Flash. Using fixed address : cfg1 0xf cfg2 0x7114 eth0: 00:03:7f:09:0b:ad eth0 up eth0 Autobooting in 1 secondsar7100> erase 0xbf020000 +7c0000 First 0x2 last 0x7d sector size 0x10000 125 Erased 124 sectors ar7100> ar7100> tftpboot 0x81000000 code.bin dup 1 speed 1000 Using eth0 device TFTP from server 192.168.0.5; our IP address is 192.168.0.2 Filename 'code.bin'. Load address: 0x81000000 Loading: T T T checksum bad T ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################ done Bytes transferred = 8126464 (7c0000 hex) ar7100> ar7100> cp.b 0x81000000 0xbf020000 0x7c0000 Copy to Flash… write addr: bf020000 done ar7100> bootm 0xbf020000 ## Booting image at bf020000 … Uncompressing Kernel Image … OK Starting kernel … Linux version 2.6.32.10 (openwrt@wrt1.marcant.net) (gcc version 4.3.3 (GCC) ) #20 Tue Apr 6 15:01:26 CEST 2010 bootconsole [early0] enabled CPU revision is: 00019374 (MIPS 24Kc) Atheros AR9132 rev 2, CPU:400.000 MHz, AHB:200.000 MHz, DDR:400.000 MHz Determined physical RAM map: memory: 02000000 @ 00000000 (usable) Initrd not found or empty - disabling initrd Zone PFN ranges: Normal 0x00000000 → 0x00002000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 → 0x00002000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 Kernel command line: rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200 board=TL-WR1043ND PID hash table entries: 128 (order: -3, 512 bytes) Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes Writing ErrCtl register=00000000 Readback ErrCtl register=00000000 Memory: 29332k/32768k available (2101k kernel code, 3436k reserved, 397k data, 152k init, 0k highmem) SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. NR_IRQS:56 Calibrating delay loop… 266.24 BogoMIPS (lpj=1331200) Mount-cache hash table entries: 512 NET: Registered protocol family 16 MIPS: machine is TP-LINK TL-WR1043ND bio: create slab <bio-0> at 0 Switching to clocksource MIPS NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered NET: Registered protocol family 1 squashfs: version 4.0 (2009/01/31) Phillip Lougher Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) ■■ 2001-2006 Red Hat, Inc. yaffs Mar 28 2010 17:53:41 Installing. msgmni has been set to 57 io scheduler noop registered io scheduler deadline registered (default) Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A console [ttyS0] enabled, bootconsole disabled console [ttyS0] enabled, bootconsole disabled Atheros AR71xx SPI Controller driver version 0.2.4 m25p80 spi0.0: s25sl064a (8192 Kbytes) Searching for RedBoot partition table in spi0.0 at offset 0x7f0000 No RedBoot partition table detected in spi0.0 spi0.0: no WRT160NL signature found Creating 5 MTD partitions on "spi0.0": 0x000000000000-0x000000020000 : "u-boot" 0x000000020000-0x000000160000 : "kernel" 0x000000160000-0x0000007f0000 : "rootfs" mtd: partition "rootfs" set to be root filesystem mtd: partition "rootfs_data" created automatically, ofs=2A0000, len=550000 0x0000002a0000-0x0000007f0000 : "rootfs_data" 0x0000007f0000-0x000000800000 : "art" 0x000000020000-0x0000007f0000 : "firmware" Realtek RTL8366RB ethernet switch driver version 0.2.0 rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK) rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found rtl8366-rtl: probed eth0: Atheros AG71xx at 0xb9000000, irq 4 Atheros AR71xx hardware watchdog driver version 0.1.0 TCP westwood registered NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear greearb@candelatech.com All bugs added by David S. Miller davem@redhat.com VFS: Mounted root (squashfs filesystem) readonly on device 31:2. Freeing unused kernel memory: 152k freed Please be patient, while OpenWrt loads … gpio-buttons driver version 0.1.2 input: gpio-buttons as /devices/platform/gpio-buttons/input/input0 Button Hotplug driver version 0.3.1 eth0: link up (1000Mbps/Full duplex) - preinit - Registered led device: tl-wr1043nd:green:usb Registered led device: tl-wr1043nd:green:system Registered led device: tl-wr1043nd:green:qss Registered led device: tl-wr1043nd:green:wlan Press the [f] key and hit [enter] to enter failsafe mode - regular preinit - jffs2 not ready yet; using ramdisk mini_fo: using base directory: / mini_fo: using storage directory: /tmp/root - init - eth0: link down Please press Enter to activate this console. eth0: link up (1000Mbps/Full duplex) device eth0.1 entered promiscuous mode device eth0 entered promiscuous mode br-lan: port 1(eth0.1) entering forwarding state PPP generic driver version 2.4.2 ip_tables: (C) 2000-2006 Netfilter Core Team NET: Registered protocol family 24 nf_conntrack version 0.5.0 (460 buckets, 1840 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. jffs2_scan_eraseblock(): End of filesystem marker found at 0x0 jffs2_build_filesystem(): unlocking the mtd device… done. jffs2_build_filesystem(): erasing all blocks after the end marker… done. mini_fo: using base directory: / mini_fo: using storage directory: /overlay

toh/tp-link/tl-wr1043nd/flashlog.txt · Last modified: 2010/06/02 11:41 by jow