Differences

This shows you the differences between two versions of the page.

toh:tp-link:tl-wr2543nd [2013/03/08 21:08]
nebbia88 Edited download links, with AArc1 and SQUASHFS images!
toh:tp-link:tl-wr2543nd [2014/05/10 23:46] (current)
arthro
Line 13: Line 13:
===== Supported Versions ===== ===== Supported Versions =====
^ Version/Model ^ S/N ^ Release Date ^ OpenWrt Version Supported ^ Model Specific Notes ^ ^ Version/Model ^ S/N ^ Release Date ^ OpenWrt Version Supported ^ Model Specific Notes ^
-| v1.0 | - | | R29680 |  | +| v1.0 | - | | 12.09 (R29680) |  | 
-| v1.2 | - | | R29680 |  |+| v1.2 | - | | 12.09 (R29680) |  |
===== Firmware Downloads ===== ===== Firmware Downloads =====
-[[http://downloads.openwrt.org/attitude_adjustment/12.09-rc1/ar71xx/generic/openwrt-ar71xx-generic-tl-wr2543-v1-squashfs-factory.bin|openwrt-ar71xx-generic-tl-wr2543n-v1-squashfs-factory.bin]] - Installing OpenWRT from factory+[[http://downloads.openwrt.org/attitude_adjustment/12.09/ar71xx/generic/openwrt-ar71xx-generic-tl-wr2543-v1-squashfs-factory.bin|openwrt-ar71xx-generic-tl-wr2543n-v1-squashfs-factory.bin]] - Installing OpenWRT from factory
-[[http://downloads.openwrt.org/attitude_adjustment/12.09-rc1/ar71xx/generic/openwrt-ar71xx-generic-tl-wr2543-v1-squashfs-sysupgrade.bin|openwrt-ar71xx-generic-tl-wr2543n-v1-squashfs-sysupgrade.bin]] - Upgrading an existing OpenWRT install+[[http://downloads.openwrt.org/attitude_adjustment/12.09/ar71xx/generic/openwrt-ar71xx-generic-tl-wr2543-v1-squashfs-sysupgrade.bin|openwrt-ar71xx-generic-tl-wr2543n-v1-squashfs-sysupgrade.bin]] - Upgrading an existing OpenWRT install
===== Installation ===== ===== Installation =====
Line 36: Line 36:
  * Check that you have a new DHCP lease such as 192.168.1.157   * Check that you have a new DHCP lease such as 192.168.1.157
  * Browse to http://192.168.1.1/   * Browse to http://192.168.1.1/
-  * Enjoy!+  * Enjoy! Though, before get going, you may like to boot to failsafe first, this means you can recover the original OpenWrt in case you configure badly. 
 +  * Failsafe is easy on this device. The lock icon light is the SYS key mentioned [[http://wiki.openwrt.org/doc/howto/generic.failsafe|here]], and the hardware button is the WPS button. On switch-on, the lock icon light always blink slowly for a good 30 secs and in that time you can give the WPS a simple press and the lock icon will start to blink rapidly, which represents failsafe mode. Now you can telnet in on 192.168.1.1 and follow the generic failsafe webpage. Which means you can return from any configuration mess you might make! 
Other installation methods will also work, such as via tftp.  See [[doc/howto/generic.flashing]] for more ideas. Other installation methods will also work, such as via tftp.  See [[doc/howto/generic.flashing]] for more ideas.
Line 175: Line 177:
===== Tags ===== ===== Tags =====
-{{tag>GigabitEthernet 5Port 1PHY USB JTAG 1Radio integrated 802.11abgn ath9k 3Ant 3x3 DetachableAntenna 64RAM 8Flash }}+{{tag>GigabitEthernet 5Port 1NIC 1WNIC USB JTAG integrated 802.11abgn ath9k 3Ant 3x3 DetachableAntenna 64RAM 8Flash}}

Back to top

toh/tp-link/tl-wr2543nd.1362773326.txt.bz2 · Last modified: 2013/03/08 21:08 by nebbia88