User Tools

Site Tools


toh:ubiquiti:edgerouter.lite

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
toh:ubiquiti:edgerouter.lite [2014/08/21 15:01]
thiagoc
toh:ubiquiti:edgerouter.lite [2016/02/08 04:37] (current)
DZU6ixi Added a few instructions before the code in the "Install" section
Line 1: Line 1:
 +====== Ubiquiti EdgeRouter Lite ======
  
 +3 Port Gigabit Router
 +
 +  * [[https://​dev.openwrt.org/​changeset/​37684|r37684]]
 +
 +===== Supported Versions =====
 +
 +
 +---- datatable ----
 +cols    : Brand, Model, Versions, Supported Current Rel, OEM device homepage URL_url, Forum Topic URL_url, Device Techdata_pageid
 +headers : Brand, Model, Version, Current Release, OEM Info, Forum Topic, Technical Data
 +align   : c,​c,​c,​c,​c,​c,​c,​c
 +filter ​ : Brand=Ubiquiti
 +filter ​ : Model=EdgeRouter Lite
 +filter ​ : Versions~
 +----
 +
 +===== Hardware Highlights =====
 +---- datatable ----
 +cols    : Model, Versions, Platform, CPU MHz, Flash MB_mbflashs,​ RAM MB_mbram, WLAN Hardware, WLAN 2.4Ghz, WLAN 5.0Ghz, Ethernet 100M ports_, Ethernet Gbit ports_, Modem, USB ports_
 +header ​ : Model, Version,​SoC,​CPU MHz,Flash MB,RAM MB,WLAN Hardware,​WLAN2.4,​WLAN5.0,​100M ports,Gbit ports,​Modem,​USB
 +align   : c,​c,​c,​c,​c,​c,​c,​c,​c,​c,​c,​c
 +filter ​ : Brand=Ubiquiti
 +filter ​ : Model=EdgeRouter Lite
 +filter ​ : Versions~
 +----
 +
 +===== Installation =====
 +  - → [[doc:​howto:​obtain.firmware|Obtain firmware]]
 +  - → [[doc:​howto:​generic.flashing|Install OpenWrt]]
 +  - → [[about:​latest|Latest OpenWrt release]]
 +
 +---- datatable ----
 +cols    : Model, Versions, Supported Current Rel, Firmware OpenWrt Install URL_url, Firmware OpenWrt Upgrade URL_url, Firmware OEM Stock URL_url
 +align   : l,c
 +filter ​ : Brand=Ubiquiti
 +filter ​ : Model=EdgeRouter Lite
 +filter ​ : Versions~
 +----
 +
 +==== Flash Layout ====
 +<WRAP BOX>
 +FIXME //​[[:​doc:​techref:​flash.layout#​discovery_how_to_find_out|Find out flash layout]], then add the flash layout table here (copy, paste, modify the [[doc:​techref:​flash.layout#​partitioning_of_squashfs-images|example]]).//​
 +
 +Please check out the article [[doc:​techref:​Flash.Layout|Flash layout]]. It contains examples and explanations that describe how to document the flash layout.
 +</​WRAP>​
 +Additional useful information about developing for this router can be found at: http://​www.crashcourse.ca/​wiki/​index.php/​EdgeRouter_Lite
 +
 +[[http://​www.smallnetbuilder.com/​lanwan/​lanwan-reviews/​32012-first-look-ubiquiti-edgerouter-lite|Review]] of Edgerouter Lite.
 +
 +=== Installation (WIP) ===
 +
 +  * You will need to remove the USB drive found within the EdgeRouter Lite, insert the USB drive into a computer, and then follow the below steps on said computer to flash OpenWrt onto the USB drive. ​
 +  * I was not able to get the router to boot after following the below steps with both of the 15.05 edge router sysupgrade .tar archives. I was only able to install 14.07 and then upgrade to 15.05.
 +  * The closest .tar archive I could find to the one used below (and the one that I got to work) can be found here: [[https://​downloads.openwrt.org/​barrier_breaker/​14.07/​octeon/​generic/​openwrt-octeon-erlite-sysupgrade.tar|https://​downloads.openwrt.org/​barrier_breaker/​14.07/​octeon/​generic/​openwrt-octeon-erlite-sysupgrade.tar]]
 +
 +<code bash>
 +$ sudo fdisk -l
 +...
 +Disk /dev/sdc: 3,9 GiB, 4127195136 bytes, 8060928 sectors
 +Unidades: setor de 1 * 512 = 512 bytes
 +Tamanho de setor (lógico/​físico):​ 512 bytes / 512 bytes
 +Tamanho E/S (mínimo/​ótimo):​ 512 bytes / 512 bytes
 +Tipo de rótulo do disco: dos
 +Identificador do disco: 0x96610b00
 +
 +Device ​    ​Boot ​ Start     End Sectors ​ Size Id Type
 +/​dev/​sdc1 ​        ​2048 ​ 292863 ​ 290816 ​ 142M  c W95 FAT32 (LBA)
 +/​dev/​sdc2 ​      ​292864 3710975 3418112 ​ 1,6G 83 Linux
 +
 +$ sudo mkfs.vfat /dev/sdc1
 +
 +$ sudo mount /dev/sdc1 /mnt/sdc1
 +
 +$ tar xf Downloads/​openwrt-octeon-erlite-sysupgrade.tar
 +
 +$ ls -l ./​sysupgrade-erlite
 +total 53808
 +-rw-r--r-- 1 thiagoc users       13 Ago 10 04:06 CONTROL
 +-rwxr-xr-x 1 thiagoc users  4760712 Ago 10 04:06 kernel*
 +-rw-r--r-- 1 thiagoc users 50331648 Ago 10 04:06 root
 +
 +$ sudo cp ./​sysupgrade-erlite/​kernel /​mnt/​sdc1/​vmlinux.64
 +
 +$ md5sum /​mnt/​sdc1/​vmlinux.64 | cut -d " " -f 1 | sudo tee /​mnt/​sdc1/​vmlinux.64.md5
 +
 +$ sudo dd if=sysupgrade-erlite/​root of=/​dev/​sdc2 bs=4096
 +</​code>​
 +
 +
 +===== Basic configuration =====
 +-> [[doc:​howto:​basic.config|Basic configuration]] After flashing, proceed with this.\\
 +Set up your Internet connection, configure wireless, configure USB port, etc.
 +
 +===== Specific Configuration =====
 +
 +==== Network interfaces ====
 +The default network configuration is:
 +^ Interface Name   ^ Description ​                 ^ Default configuration ​   ^
 +| br-lan (eth0) ​   | LAN port 0                   | 192.168.1.1/​24 ​  |
 +| wan (eth1) ​      | LAN port 1                   | DHCP             |
 +| (eth2) ​          | LAN port 2                   | Not configured ​  |
 +
 +
 +
 +===== Hardware =====
 +==== Info ====
 +
 +| **[[wp>​Instruction set]]:​** ​              | [[wp>​MIPS architecture#​MIPS64|MIPS64]] ​ |
 +| **Vendor:​** ​                              | [[wp>​Cavium Networks]] ​ |
 +| **[[doc:​techref:​Bootloader]]:​** ​          | [[doc:​techref:​bootloader:​uboot|U-Boot]] |
 +| **[[doc:​hardware:​soc|System-On-Chip]]:​** ​ | [[http://​www.cavium.com/​OCTEON-Plus_CN50XX.html|Octeon5020]] |
 +| **[[doc:​hardware:​cpu|CPU]] @Frq** ​        | Cavium Dual cnMIPS Core V?.? @x500MHz |
 +| **Flash size:​** ​                | 4MiB + 2048 MiB USB Stick |
 +| **Flash Chip:​** ​                | Macronix MX29LV320ETTI-70G/​Toshiba ​ |
 +| **RAM size:​** ​                  | 512 MiB   |
 +| **RAM Chip:​** ​                  | Winbond W971GG8JB-25 x 4 |
 +| **Wireless:​** ​              | na   |
 +| **[[doc:​hardware:​Switch]]:​** ​   | Atheros AR8035 Gigabit PHY x3 |
 +| **Modem:​** ​                     | na  |
 +| **USB:​** ​                       | Yes 1 x 2.0 |
 +| **[[doc:​hardware:​port.serial|Serial]]:​** ​ | [[#​Serial|Yes]] |
 +| **[[doc:​hardware:​port.jtag|JTAG]]:​** ​     | [[#​JTAG|Yes]] ​  |
 +
 +==== Serial ====
 +-> [[doc:​hardware:​port.serial]] general information about the serial port, serial port cable, etc.
 +
 +There is an RJ45 console port which can be used with an RJ45 to 9pin serial cable
 +
 +
 +^ Serial connection parameters for Ubiquiti EdgeRouter Lite | 115200, 8N1 |
 +
 +
 +
 +===== Bootlogs =====
 +
 +==== OEM bootlog ====
 +<WRAP bootlog>
 +<​nowiki>​
 +Looking for valid bootloader image....
 +Jumping to start of image at address 0xbfc80000
 +
 +
 +U-Boot 1.1.1 (UBNT Build ID: 4493936-g009d77b) (Build time: Sep 20 2012 - 15:48:51)
 +
 +BIST check passed.
 +UBNT_E100 r1:2, r2:14, serial #: DC9FDB80387F
 +Core clock: 500 MHz, DDR clock: 266 MHz (532 Mhz data rate)
 +DRAM:  512 MB
 +Clearing DRAM....... done
 +Flash: ​ 4 MB
 +Net:   ​octeth0,​ octeth1, octeth2
 +
 +USB:   (port 0) scanning bus for devices... 1 USB Devices found
 +       ​scanning bus for storage devices...
 +  Device 0: Vendor: ​         Prod.: USB DISK 2.0     Rev: PMAP
 +            Type: Removable Hard Disk
 +            Capacity: 3700.6 MB = 3.6 GB (7579008 x 512)
 +^H^H^H 0 
 +reading vmlinux.64
 +........................................
 +
 +8081560 bytes read
 +argv[2]: coremask=0x3
 +argv[3]: root=/​dev/​sda2
 +argv[4]: rootdelay=15
 +argv[5]: rw
 +argv[6]: rootsqimg=squashfs.img
 +argv[7]: rootsqwdir=w
 +argv[8]: mtdparts=phys_mapped_flash:​512k(boot0),​512k(boot1),​64k@3072k(eeprom)
 +ELF file is 64 bit
 +Allocating memory for ELF segment: addr: 0xffffffff81100000 (adjusted to: 0x1100000), size 0x7f2a90
 +Allocated memory for ELF segment: addr: 0xffffffff81100000,​ size 0x7f2a90
 +Processing PHDR 0
 +  Loading 79a980 bytes at ffffffff81100000
 +  Clearing 58110 bytes at ffffffff8189a980
 +## Loading Linux kernel with entry point: 0xffffffff81105cd0 ...
 +Bootloader: Done loading app on coremask: 0x3
 +Linux version 2.6.32.13-UBNT (ancheng@ubnt-builder2) (gcc version 4.3.3 (Cavium Networks Version: 2_0_0 build 99) ) #1 SMP Wed Oct 24 01:08:06 PDT 2012
 +CVMSEG size: 2 cache lines (256 bytes)
 +Cavium Networks SDK-2.0
 +CPU revision is: 000d0601 (Cavium Octeon+)
 +Checking for the multiply/​shift bug... no.
 +Checking for the daddiu bug... no.
 +Determined physical RAM map:
 + ​memory:​ 0000000000034000 @ 000000000186c000 (usable after init)
 + ​memory:​ 0000000006800000 @ 0000000001900000 (usable)
 + ​memory:​ 0000000007c00000 @ 0000000008200000 (usable)
 + ​memory:​ 000000000fc00000 @ 0000000410000000 (usable)
 +Wasting 350112 bytes for tracking 6252 unused pages
 +Zone PFN ranges:
 +  DMA32    0x0000186c -> 0x00100000
 +  Normal ​  ​0x00100000 -> 0x0041fc00
 +Movable zone start PFN for each node
 +early_node_map[4] active PFN ranges
 +    0: 0x0000186c -> 0x000018a0
 +    0: 0x00001900 -> 0x00008100
 +    0: 0x00008200 -> 0x0000fe00
 +    0: 0x00410000 -> 0x0041fc00
 +Cavium Hotplug: Available coremask 0x0
 +PERCPU: Embedded 10 pages/cpu @a8000000020b8000 s10624 r8192 d22144 u65536
 +pcpu-alloc: s10624 r8192 d22144 u65536 alloc=16*4096
 +pcpu-alloc: [0] 0 [0] 1 
 +Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 63895
 +Kernel command line:  bootoctlinux $loadaddr coremask=0x3 root=/​dev/​sda2 rootdelay=15 rw rootsqimg=squashfs.img rootsqwdir=w mtdparts=phys_mapped_flash:​512k(boot0),​512k(boot1),​64k@3072k(eeprom) console=ttyS0,​115200
 +PID hash table entries: 1024 (order: 1, 8192 bytes)
 +Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
 +Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
 +Primary instruction cache 32kB, virtually tagged, 4 way, 64 sets, linesize 128 bytes.
 +Primary data cache 16kB, 64-way, 2 sets, linesize 128 bytes.
 +Memory: 483444k/​491728k available (3478k kernel code, 8064k reserved, 4118k data, 208k init, 0k highmem)
 +Hierarchical RCU implementation.
 +NR_IRQS:152
 +Calibrating delay loop (skipped) preset value.. 1000.00 BogoMIPS (lpj=5000000)
 +Security Framework initialized
 +Mount-cache hash table entries: 256
 +Checking for the daddi bug... no.
 +SMP: Booting CPU01 (CoreId ​ 1)...
 +CPU revision is: 000d0601 (Cavium Octeon+)
 +Brought up 2 CPUs
 +NET: Registered protocol family 16
 +bio: create slab <​bio-0>​ at 0
 +SCSI subsystem initialized
 +usbcore: registered new interface driver usbfs
 +usbcore: registered new interface driver hub
 +usbcore: registered new device driver usb
 +Switching to clocksource OCTEON_CVMCOUNT
 +NET: Registered protocol family 2
 +IP route cache hash table entries: 2048 (order: 2, 16384 bytes)
 +TCP established hash table entries: 8192 (order: 5, 131072 bytes)
 +TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
 +TCP: Hash tables configured (established 8192 bind 8192)
 +TCP reno registered
 +NET: Registered protocol family 1
 +/​proc/​octeon_perf:​ Octeon performace counter interface loaded
 +octeon_wdt: Initial granularity 5 Sec.
 +squashfs: version 4.0 (2009/​01/​31) Phillip Lougher
 +Registering unionfs 2.5.11 (for 2.6.32.55)
 +msgmni has been set to 944
 +alg: No test for stdrng (krng)
 +io scheduler noop registered
 +io scheduler cfq registered (default)
 +Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
 +serial8250.0:​ ttyS0 at MMIO 0x1180000000800 (irq = 58) is a OCTEON
 +console [ttyS0] enabled
 +loop: module loaded
 +ohci_hcd: USB 1.1 '​Open'​ Host Controller (OHCI) Driver
 +OcteonUSB: Detected 1 ports
 +OcteonUSB OcteonUSB.0:​ Octeon Host Controller
 +OcteonUSB OcteonUSB.0:​ new USB bus registered, assigned bus number 1
 +OcteonUSB OcteonUSB.0:​ irq 80, io mem 0x00000000
 +usb usb1: configuration #1 chosen from 1 choice
 +hub 1-0:1.0: USB hub found
 +hub 1-0:1.0: 1 port detected
 +OcteonUSB: Registered HCD for port 0 on irq 80
 +Initializing USB Mass Storage driver...
 +usbcore: registered new interface driver usb-storage
 +USB Mass Storage support registered.
 +usbcore: registered new interface driver libusual
 +Probing USB hub...
 +hub 1-0:1.0: USB hub found
 +hub 1-0:1.0: 1 port detected
 +TCP cubic registered
 +NET: Registered protocol family 17
 +NET: Registered protocol family 15
 +L2 lock: TLB refill 256 bytes
 +L2 lock: General exception 128 bytes
 +L2 lock: low-level interrupt 128 bytes
 +L2 lock: interrupt 640 bytes
 +L2 lock: memcpy 1152 bytes
 +Bootbus flash: Setting flash for 4MB flash at 0x1f800000
 +phys_mapped_flash:​ Found 1 x16 devices at 0x0 in 8-bit bank
 + ​Amd/​Fujitsu Extended Query Table at 0x0040
 +phys_mapped_flash:​ Swapping erase regions for broken CFI table.
 +number of CFI chips: 1
 +cfi_cmdset_0002:​ Disabling erase-suspend-program due to code brokenness.
 +3 cmdlinepart partitions found on MTD device phys_mapped_flash
 +Creating 3 MTD partitions on "​phys_mapped_flash":​
 +0x000000000000-0x000000080000 : "​boot0"​
 +0x000000080000-0x000000100000 : "​boot1"​
 +0x000000300000-0x000000310000 : "​eeprom"​
 +Waiting 15sec before mounting root device...
 +hub 1-0:1.0: activate --> -22
 +usb 1-1: new high speed USB device using OcteonUSB and address 2
 +usb 1-1: configuration #1 chosen from 1 choice
 +scsi0 : SCSI emulation for USB Mass Storage devices
 +scsi 0:0:0:0: Direct-Access ​             USB DISK 2.0     PMAP PQ: 0 ANSI: 4
 +sd 0:0:0:0: [sda] 7579008 512-byte logical blocks: (3.88 GB/3.61 GiB)
 +sd 0:0:0:0: [sda] Write Protect is off
 +sd 0:0:0:0: [sda] Assuming drive cache: write through
 +sd 0:0:0:0: [sda] Assuming drive cache: write through
 + sda: sda1 sda2
 +sd 0:0:0:0: [sda] Assuming drive cache: write through
 +sd 0:0:0:0: [sda] Attached SCSI removable disk
 +kjournald starting. ​ Commit interval 5 seconds
 +EXT3 FS on sda2, internal journal
 +EXT3-fs: recovery complete.
 +EXT3-fs: mounted filesystem with writeback data mode.
 +VFS: Mounted root (unionfs filesystem) on device 0:12.
 +Freeing unused kernel memory: 208k freed
 +Algorithmics/​MIPS FPU Emulator v1.5
 +^MINIT: version 2.88 booting^M
 +^MINIT: Entering runlevel: 2^M
 +Starting routing daemon: rib.
 +Starting EdgeOS router: migrate rl-system configure.
 +
 +Welcome to EdgeOS ubnt ttyS0
 +
 +By logging in, accessing, or using the Ubiquiti product, you
 +acknowledge that you have read and understood the Ubiquiti
 +License Agreement (available in the Web UI at, by default,
 +http://​192.168.1.1) and agree to be bound by its terms.
 +
 +ubnt login: ubnt
 +Password: ​
 +Linux ubnt 2.6.32.13-UBNT #1 SMP Wed Oct 24 01:08:06 PDT 2012 mips64
 +Welcome to EdgeOS
 +ubnt@ubnt:​~$ ​
 +</​nowiki>​
 +</​WRAP>​
 +
 +
 +==== OpenWrt bootlog ====
 +<WRAP bootlog>
 +<​nowiki>​
 +Looking for valid bootloader image....
 +Jumping to start of image at address 0xbfc80000
 +
 +
 +U-Boot 1.1.1 (UBNT Build ID: 4493936-g009d77b) (Build time: Sep 20 2012 - 15:48:51)
 +
 +BIST check passed.
 +UBNT_E100 r1:2, r2:14, serial #: DC9FDB80387F
 +Core clock: 500 MHz, DDR clock: 266 MHz (532 Mhz data rate)
 +DRAM:  512 MB
 +Clearing DRAM....... done
 +Flash: ​ 4 MB
 +Net:   ​octeth0,​ octeth1, octeth2
 +
 +USB:   (port 0) scanning bus for devices... 1 USB Devices found
 +       ​scanning bus for storage devices...
 +  Device 0: Vendor: SanDisk ​ Prod.: Cruzer Fit       Rev: 1.27
 +            Type: Removable Hard Disk
 +            Capacity: 30532.5 MB = 29.8 GB (62530624 x 512)
 +^H^H^H 0 
 +reading vmlinux.64
 +........................
 +
 +4874120 bytes read
 +argv[2]: coremask=0x3
 +argv[3]: root=/​dev/​sda2
 +argv[4]: rootdelay=15
 +argv[5]: rw
 +argv[6]: rootsqimg=squashfs.img
 +argv[7]: rootsqwdir=w
 +argv[8]: mtdparts=phys_mapped_flash:​512k(boot0),​512k(boot1),​64k@3072k(eeprom)
 +ELF file is 64 bit
 +Allocating memory for ELF segment: addr: 0xffffffff81100000 (adjusted to: 0x1100000), size 0x14fd878
 +Allocated memory for ELF segment: addr: 0xffffffff81100000,​ size 0x14fd878
 +Processing PHDR 0
 +  Loading 4a4a00 bytes at ffffffff81100000
 +  Clearing 1058e78 bytes at ffffffff815a4a00
 +## Loading Linux kernel with entry point: 0xffffffff81107610 ...
 +Bootloader: Done loading app on coremask: 0x3
 +[    0.000000] Linux version 3.18.20 (buildbot@builder1) (gcc version 4.6.4 (OpenWrt/​Linaro GCC 4.6-2013.05 r46450) ) #1 SMP Fri Sep 4 18:32:59 CEST 2015
 +[    0.000000] CVMSEG size: 2 cache lines (256 bytes)
 +[    0.000000] bootconsole [early0] enabled
 +[    0.000000] CPU0 revision is: 000d0601 (Cavium Octeon+)
 +[    0.000000] Checking for the multiply/​shift bug... no.
 +[    0.000000] Checking for the daddiu bug... no.
 +[    0.000000] Determined physical RAM map:
 +[    0.000000] ​ memory: 0000000005800000 @ 0000000002600000 (usable)
 +[    0.000000] ​ memory: 0000000007c00000 @ 0000000008200000 (usable)
 +[    0.000000] ​ memory: 000000000fc00000 @ 0000000410000000 (usable)
 +[    0.000000] ​ memory: 00000000014fd878 @ 0000000001100000 (usable)
 +[    0.000000] Wasting 243712 bytes for tracking 4352 unused pages
 +[    0.000000] Initrd not found or empty - disabling initrd
 +[    0.000000] Using internal Device Tree.
 +[    0.000000] software IO TLB [mem 0x0358e000-0x0758e000] (64MB) mapped at [800000000358e000-800000000758dfff]
 +[    0.000000] Zone ranges:
 +[    0.000000] ​  ​DMA32 ​   [mem 0x01100000-0xefffffff]
 +[    0.000000] ​  ​Normal ​  [mem 0xf0000000-0x41fbfffff]
 +[    0.000000] Movable zone start for each node
 +[    0.000000] Early memory node ranges
 +[    0.000000] ​  ​node ​  0: [mem 0x01100000-0x025fcfff]
 +[    0.000000] ​  ​node ​  0: [mem 0x02600000-0x07dfffff]
 +[    0.000000] ​  ​node ​  0: [mem 0x08200000-0x0fdfffff]
 +[    0.000000] ​  ​node ​  0: [mem 0x410000000-0x41fbfffff]
 +[    0.000000] Initmem setup node 0 [mem 0x01100000-0x41fbfffff]
 +[    0.000000] Primary instruction cache 32kB, virtually tagged, 4 way, 64 sets, linesize 128 bytes.
 +[    0.000000] Primary data cache 16kB, 64-way, 2 sets, linesize 128 bytes.
 +[    0.000000] PERCPU: Embedded 12 pages/cpu @8000000007649000 s10752 r8192 d30208 u49152
 +[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 122459
 +[    0.000000] Kernel command line:  bootoctlinux $loadaddr coremask=0x3 root=/​dev/​sda2 rootdelay=15 rw rootsqimg=squashfs.img rootsqwdir=w mtdparts=phys_mapped_flash:​512k(boot0),​512k(boot1),​64k@3072k(eeprom) console=ttyS0,​115200
 +[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
 +[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
 +[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
 +[    0.000000] Memory: 400752K/​496628K available (3661K kernel code, 269K rwdata, 584K rodata, 260K init, 16694K bss, 95876K reserved)
 +[    0.000000] Hierarchical RCU implementation.
 +[    0.000000] ​ CONFIG_RCU_FANOUT set to non-default value of 32
 +[    0.000000] ​ RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2.
 +[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16,​ nr_cpu_ids=2
 +[    0.000000] NR_IRQS:127
 +[    7.155498] Calibrating delay loop (skipped) preset value.. 1000.00 BogoMIPS ​
 +(lpj=2000000)
 +[    7.163591] pid_max: default: 32768 minimum: 301
 +[    7.168453] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
 +[    7.174930] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
 +[    7.182838] Checking for the daddi bug... no.
 +[    7.189525] SMP: Booting CPU01 (CoreId ​ 1)...
 +[    7.193896] CPU1 revision is: 000d0601 (Cavium Octeon+)
 +[    7.194067] Brought up 2 CPUs
 +[    7.208091] NET: Registered protocol family 16
 +[    7.213435] Not in host mode, PCI Controller not initialized
 +[    7.241280] SCSI subsystem initialized
 +[    7.245592] usbcore: registered new interface driver usbfs
 +[    7.251140] usbcore: registered new interface driver hub
 +[    7.256505] usbcore: registered new device driver usb
 +[    7.263131] Switched to clocksource OCTEON_CVMCOUNT
 +[    7.269507] NET: Registered protocol family 2
 +[    7.274961] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
 +[    7.282025] TCP bind hash table entries: 4096 (order: 5, 131072 bytes)
 +[    7.288583] TCP: Hash tables configured (established 4096 bind 4096)
 +[    7.294876] TCP: reno registered
 +[    7.298027] UDP hash table entries: 256 (order: 2, 24576 bytes)
 +[    7.303932] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes)
 +[    7.310577] NET: Registered protocol family 1
 +[    7.321577] futex hash table entries: 512 (order: 4, 65536 bytes)
 +[    7.329568] squashfs: version 4.0 (2009/​01/​31) Phillip Lougher
 +[    7.335402] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
 +[    7.345551] msgmni has been set to 782
 +[    7.349869] io scheduler noop registered
 +[    7.353680] io scheduler deadline registered (default)
 +[    7.359124] octeon_gpio 1070000000800.gpio-controller:​ OCTEON GPIO driver probed.
 +[    7.366864] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
 +[    7.377417] console [ttyS0] disabled
 +[    7.380915] 1180000000800.serial:​ ttyS0 at MMIO 0x1180000000800 (irq = 41, base_baud = 31250000) is a OCTEON
 +[    7.390685] console [ttyS0] enabled
 +[    7.390685] console [ttyS0] enabled
 +[    7.397597] bootconsole [early0] disabled
 +[    7.397597] bootconsole [early0] disabled
 +[    7.406065] 1180000000c00.serial:​ ttyS1 at MMIO 0x1180000000c00 (irq = 42, base_baud = 31250000) is a OCTEON
 +[    7.416579] octeon_rng octeon_rng: Octeon Random Number Generator
 +[    7.424226] of-flash 1f400000.nor:​ Can't get bank width from device tree
 +[    7.431364] libphy: mdio-octeon:​ probed
 +[    7.437409] mdio-octeon 1180000001800.mdio:​ Version 1.0
 +[    7.443107] ehci_hcd: USB 2.0 '​Enhanced'​ Host Controller (EHCI) Driver
 +[    7.449827] ehci-pci: EHCI PCI platform driver
 +[    7.454438] ehci-platform:​ EHCI generic platform driver
 +[    7.459943] ohci_hcd: USB 1.1 '​Open'​ Host Controller (OHCI) Driver
 +[    7.466341] ohci-platform:​ OHCI generic platform driver
 +[    7.471931] usbcore: registered new interface driver usb-storage
 +[    7.477984] octeon_wdt: Initial granularity 5 Sec
 +[    7.483415] cavium-ethernet 1.9
 +[    7.489361] Interface 0 has 3 ports (RGMII)
 +[    7.507929] OcteonUSB 16f0010000000.usbc:​ Octeon Host Controller
 +[    7.514015] OcteonUSB 16f0010000000.usbc:​ new USB bus registered, assigned bus number 1
 +[    7.522121] OcteonUSB 16f0010000000.usbc:​ irq 124, io mem 0x00000000
 +[    7.529500] hub 1-0:1.0: USB hub found
 +[    7.533398] hub 1-0:1.0: 1 port detected
 +[    7.537855] OcteonUSB 16f0010000000.usbc:​ Registered HCD for port 0 on irq 124
 +[    7.545470] TCP: cubic registered
 +[    7.548838] NET: Registered protocol family 17
 +[    7.553430] bridge: automatic filtering via arp/​ip/​ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
 +[    7.566112] Bridge firewalling registered
 +[    7.570159] 8021q: 802.1Q VLAN Support v1.8
 +[    7.574582] Bootbus flash: Setting flash for 4MB flash at 0x1f800000
 +[    7.581027] phys_mapped_flash:​ Found 1 x16 devices at 0x0 in 8-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0000a7
 +[    7.591405] Amd/Fujitsu Extended Query Table at 0x0040
 +[    7.596578] ​  ​Amd/​Fujitsu Extended Query version 1.1.
 +[    7.601650] phys_mapped_flash:​ Swapping erase regions for top-boot CFI table.
 +[    7.608803] number of CFI chips: 1
 +[    7.612247] 3 cmdlinepart partitions found on MTD device phys_mapped_flash
 +[    7.619143] Creating 3 MTD partitions on "​phys_mapped_flash":​
 +[    7.624909] 0x000000000000-0x000000080000 : "​boot0"​
 +[    7.631014] 0x000000080000-0x000000100000 : "​boot1"​
 +[    7.637020] 0x000000300000-0x000000310000 : "​eeprom"​
 +[    7.644963] Waiting 15 sec before mounting root device...
 +[    7.903003] usb 1-1: new high-speed USB device number 2 using OcteonUSB
 +[    8.088333] usb-storage 1-1:1.0: USB Mass Storage device detected
 +[    8.094929] scsi host0: usb-storage 1-1:1.0
 +[    9.100109] scsi 0:0:0:0: Direct-Access ​    ​SanDisk ​ Cruzer Fit       1.27 PQ: 0 ANSI: 6
 +[    9.110864] sd 0:0:0:0: [sda] 62530624 512-byte logical blocks: (32.0 GB/29.8 GiB)
 +[    9.119423] sd 0:0:0:0: [sda] Write Protect is off
 +[    9.124706] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn'​t support DPO or FUA
 +[    9.139098] ​ sda: sda1 sda2
 +[    9.144692] sd 0:0:0:0: [sda] Attached SCSI removable disk
 +[   ​21.591004] random: nonblocking pool is initialized
 +[   ​22.663435] EXT4-fs (sda2): couldn'​t mount as ext3 due to feature incompatibilities
 +[   ​22.672567] EXT4-fs (sda2): couldn'​t mount as ext2 due to feature incompatibilities
 +[   ​22.705233] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
 +[   ​22.712988] VFS: Mounted root (ext4 filesystem) on device 8:2.
 +[   ​22.719137] Freeing unused kernel memory: 260K (ffffffff8156f000 - ffffffff815b0000)
 +[   ​22.863758] init: Console is alive
 +[   ​22.867664] init: - watchdog -
 +[   ​23.875320] init: - preinit -
 +cat: can't open '/​proc/​device-tree/​model':​ No such file or directory
 +Press the [f] key and hit [enter] to enter failsafe mode
 +Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
 +[   ​27.072217] mount_root: mounting /dev/root
 +[   ​27.076960] EXT4-fs (sda2): re-mounted. Opts: (null)
 +[   ​27.103111] procd: - early -
 +[   ​27.106176] procd: - watchdog -
 +[   ​27.695465] procd: - ubus -
 +[   ​28.712293] procd: - init -
 +Please press Enter to activate this console.
 +[   ​29.344728] NET: Registered protocol family 10
 +[   ​29.355138] ip6_tables: (C) 2000-2006 Netfilter Core Team
 +[   ​29.379427] ip_tables: (C) 2000-2006 Netfilter Core Team
 +[   ​29.392393] nf_conntrack version 0.5.0 (3132 buckets, 12528 max)
 +[   ​29.443418] xt_time: kernel timezone is -0000
 +[   ​29.456306] PPP generic driver version 2.4.2
 +[   ​29.461800] NET: Registered protocol family 24
 +[   ​33.150085] device eth0 entered promiscuous mode
 +[   ​33.162001] br-lan: port 1(eth0) entered forwarding state
 +[   ​33.167506] br-lan: port 1(eth0) entered forwarding state
 +[   ​33.233722] IPv6: ADDRCONF(NETDEV_UP):​ eth1: link is not ready
 +[   ​34.135103] br-lan: port 1(eth0) entered disabled state
 +[   ​37.139095] eth0: 1000 Mbps Full duplex, port 0
 +[   ​37.143706] br-lan: port 1(eth0) entered forwarding state
 +[   ​37.149196] br-lan: port 1(eth0) entered forwarding state
 +[   ​37.231109] eth1: 1000 Mbps Full duplex, port 1
 +[   ​37.235712] IPv6: ADDRCONF(NETDEV_CHANGE):​ eth1: link becomes ready
 +[   ​39.150996] br-lan: port 1(eth0) entered forwarding state
 +
 +
 +
 +BusyBox v1.23.2 (2015-07-25 01:39:02 CEST) built-in shell (ash)
 +
 +  _______ ​                    ​________ ​       __
 + ​| ​      ​|.-----.-----.-----.| ​ |  |  |.----.| ​ |_
 + ​| ​  ​- ​  ​|| ​ _  |  -__|     ​|| ​ |  |  ||   ​_|| ​  _|
 + ​|_______|| ​  ​__|_____|__|__||________||__| ​ |____|
 +          |__| W I R E L E S S   F R E E D O M
 + ​-----------------------------------------------------
 + CHAOS CALMER (15.05, r46767)
 + ​-----------------------------------------------------
 +  * 1 1/2 oz Gin            Shake with a glassful
 +  * 1/4 oz Triple Sec       of broken ice and pour
 +  * 3/4 oz Lime Juice       ​unstrained into a goblet.
 +  * 1 1/2 oz Orange Juice
 +  * 1 tsp. Grenadine Syrup
 + ​-----------------------------------------------------
 +root@OpenWrt:/# ​
 +</​nowiki>​
 +</​WRAP>​
 +===== Tags =====
 +{{tag>​GigabitEthernet 0WNIC MIPS64 cavium octeon Ubiquiti crypto}}