User Tools

Site Tools


toh:zte:zxhnh108n

ZTE ZXHN H108N

ZTE ZXHN H108N is ADSL/ADSL2+ Wi-Fi router based on Broadcom 6328.

Everything working except USB port.

Tested Versions

Version/Model Launch Date S/N OpenWrt Version Supported Model Specific Notes
AZRFC V1.0 - - CHAOS CALMER (15.05.1, r48532) -

Hardware Highlights

SoC Ram Flash WLAN Network USB Serial JTag
BCM63281 @320Mhz 64MiB 8MiB BCM43225 4 x 1 1 ? ?

Hardware

Info

Architecture: MIPS
Vendor: Broadcom
Bootloader: ?
System-On-Chip: Broadcom BCM63281 KFBG
CPU/Speed 320Mhz
Flash-Chip: Macronix MX25L6406E 8MiB)
RAM: Nanya Technology Corporation NT5TU32M16DG-AC (64MiB)
Wireless: Broadcom BCM43225 2.4ghz 802.11bgn
Ethernet: in-SoC?
Internet: ADSL/ADSL2+
USB: 1 x ?
Serial: ?
JTAG: ?

Installation

Download openwrt-15.05.1-brcm63xx-generic-96328avng-8M-flash-generic-squashfs-cfe.bin

Then access CFE upload page:

  1. Turn off modem.
  2. Press "reset" and keeping it pressed, turn on the router.
  3. Wait 20 seconds and then release "reset" button.
  4. Browse to "192.168.1.1"
  5. Select the previously downloaded image and press "upgrade".
  6. Power led will flash from green to red (aprox 2 minutes) and finally stays orange.
  7. Once it finishes, OpenWRT will be installed.

Photos

Model Number

Front:

Photo of front of the casing

Back:

Photo of back of the casing

Main PCB

Photo of PCB

Serial

port.serial general information about the serial port, serial port cable, etc.

Serial log:

Photo of PCB with markings

JTAG

port.jtag general information about the JTAG port, JTAG cable, etc.

How to connect to the JTAG Port of this specific device:

Photo of PCB with markings

Debricking

Notes

Tags

toh/zte/zxhnh108n.txt · Last modified: 2017/02/07 17:49 by danitool