User Tools

Site Tools


toh:zte:zxv10h108l

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Previous revision
toh:zte:zxv10h108l [2012/11/20 22:03]
toh:zte:zxv10h108l [2016/11/15 11:04] (current)
v_2e [Opening the case] A PCB photo from other user's link embedded
Line 1: Line 1:
 +====== ZTE ZXV10 H108L ======
 +ZTE ZXV10 H108L is ADSL/ADSL2+ Wi-Fi router based on Lantiq AMAZON-SE (PSB 50601 HL). Ukrainian operator Ukrtelecom distributes it for free to clients.
  
 +
 +===== Supported Versions =====
 +^ Version/​Model ^ Launch Date ^ S/N ^ OpenWrt Version Supported ^ Model Specific Notes ^
 +| v1   ​| ​ -  | - | - | - |
 +
 +
 +===== Hardware Highlights =====
 +^ CPU ^ Ram ^ Flash ^ WLAN ^ Network ^ USB ^ Serial ^ JTag ^
 +| [[doc:​hardware:​soc:​soc.lantiq|32-bit MIPS 4KEc procesor@133/​266 MHz]] | 16MiB | ? 4MiB from ram ? | b/g/n | 4 x 1| 0-2 | ? | ? |
 +
 +
 +===== Installation =====
 +  - -> [[doc:​howto:​obtain.firmware]]
 +  - -> [[doc:​howto:​generic.flashing|Install OpenWrt]]
 +
 +===== Hardware =====
 +==== Info ====
 +| **[[wp>​Instruction set|Architecture]]:​** ​   | [[wp>​MIPS architecture|MIPS]] |
 +| **Vendor:​** ​         | [[wp>​Lantiq]] |
 +| **[[doc:​techref:​Bootloader]]:​** ​    | U-Boot |
 +| **[[doc:​hardware:​soc|System-On-Chip]]:​** ​ | [[doc:​hardware:​soc:​soc.lantiq|Lantiq AMAZON-SE PSB 50601 HL]] |
 +| **[[doc:​hardware:​cpu|CPU]]/​Speed** ​       | 32-bit MIPS 4KEc procesor@133/​266 MHz |
 +| **Flash-Chip:​** ​     | [[http://​www.macronix.com/​QuickPlace/​hq/​PageLibrary4825740B00298A3B.nsf/​h_Index/​3F21BAC2E121E17848257639003A3146/​$File/​MX25L3206E,​%203V,​%2032Mb,​%20v1.4.pdf|Macronix MX25L3206E]] (4MiB) |
 +| **Flash size:​** ​     | 2944 KiB |
 +| **RAM:​** ​            | 13568 KiB   ​[[http://​www.esmt.com.tw/​DB/​manager/​upload/​M12L128168A.pdf|ESMT M12L128168A-6T]] (16MiB) |
 +| **Wireless:​** ​       | Atheros AR9271 2.4ghz 802.11bgn |
 +| **Ethernet:​** ​       | RealTek RTL8306G [[doc:​techref:​swconfig]] |
 +| **Internet:​** ​       | ADSL/​ADSL2+ ​ |
 +| **USB:​** ​            | 0 x 2.0 or 2 x 2.0 (different versions) |
 +| **[[doc:​hardware:​port.serial|Serial]]:​** ​         | [[#​Serial|yes]] |
 +| **[[doc:​hardware:​port.jtag|JTAG]]:​** ​           | [[#​JTAG|?​]] ​ |
 +
 +==== Photos ====
 +Model Number
 +
 +//Front://
 +
 +**Photo of front of the casing**
 +
 +{{:​media:​zte:​zxv10-h108l_case.jpg?​200|}}
 +
 +//Back://
 +
 +**Photo of back of the casing**
 +
 +==== Opening the case ====
 +**Note:** This will void your warranty!
 +
 +  *To remove the cover do a/b/c
 +
 +//Main PCB//
 +
 +**Photo of PCB**
 +[[http://​info.kp.km.ua/​images/​zte_zxv10h108l.jpg|Here]]
 +
 +{{:​media:​zte:​zte-zxv10-h108l-pcb-top.jpg?​200|}}
 +
 +{{:​media:​zte:​zte_zxv10h108l.jpg?​200|}}
 +==== Serial ====
 +-> [[doc:​hardware:​port.serial]] general information about the serial port, serial port cable, etc.
 +
 +In this model the serial port works in "''​115200 8N1''"​ mode.
 +
 +Serial log:
 +
 +**Photo of PCB with markings**
 +
 +{{:​media:​zte:​zte-zxv10-h108l-pcb-serial.jpg?​200|}}
 +
 +==== JTAG ====
 +-> [[doc:​hardware:​port.jtag]] general information about the JTAG port, JTAG cable, etc.
 +
 +How to connect to the JTAG Port of this specific device:
 +
 +**Photo of PCB with markings**
 +
 +
 +===== Debricking =====
 +-> [[doc:​howto:​generic.debrick]]
 +
 +===== Bootloader Mods =====
 +  - you could read about [[doc:​techref:​bootloader]] in general
 +
 +===== Hardware mods =====
 +  - as a beginner, you really should inform yourself about [[doc:​hardware:​soldering]] in general and then obtain some practical experience!
 +
 +==== 128MiB RAM Mod ====
 +==== I²C GPIO Mod ====
 +==== I²C Tiny-USB Mod ====
 +
 +===== Notes =====
 +
 +  * [[http://​ogo.in.ua/​forums/​topic/​8133-%D0%BE%D0%B1%D1%81%D1%83%D0%B6%D0%B4%D0%B5%D0%BD%D0%B8%D0%B5-%D0%BC%D0%BE%D0%B4%D0%B5%D0%BC%D0%BE%D0%B2-zxv10-h108l/​page__st__420|In Russian]]. ​
 +
 +  * For those who have this modem, by the Greek Vendor "​Wind",​ there is a exploit who lets you get into the system as root and run any command the router supports. Check it in GitHub at [[https://​github.com/​stasinopoulos/​ZTExploit]]
 +
 +
 + 
 +
 +===== Tags =====
 +[[meta:​tags|How to add tags]]
 +
 +{{tag>​lantiq amazon FastEthernet MIPS32}}