ZyXEL G-560

Hardware Highlights

SoC Ram Flash Network USB Serial JTag
TI TNETW5306 16MiB 4MiB 1 No Yes ?

Manufacturer's site: link

Forum: https://forum.openwrt.org/viewtopic.php?id=???

Photos

Model Number

Front:

Photo of front of the casing

Back:

Photo of back of the casing

Opening the case

Note: This will void your warranty!

Similar to AirLive WL-8000AP

  • To remove the cover just unscrew the two screws at the bottom.

Main PCB

Serial

port.serial general information about the serial port, serial port cable, etc.

How to connect to the Serial Port of this specific device:

Photo of PCB with markings

Hardware mods

  1. as a beginner, you really should inform yourself about soldering in general and then obtain some practical experience!

32MiB RAM Mod

Uses a 8Mbit x 16bit (8Mibit*16=128 mebibit. 128 mebibit/8=16MiByte) SDRAM chip @133MHz

Working chips

Type ID Code Vendor
SDR 16Mx16 PC133 48LC16M16A2 MT

Bootlogs

OEM bootlog

VxWorks System Boot Copyright 1984-1998 Wind River Systems, Inc. CPU: Texas Instruments AP Version: 5.4 BSP version: 1.2/1 Creation date: Jul 22 2004, 19:37:22 Press any key to stop auto-boot... 0 auto-booting... boot device : flash unit number : 0 processor number : 0 host name : host file name : g560.img inet on ethernet (e) : 192.168.1.2:ffffff00 host inet (h) : 192.168.1.100 user (u) : ax5 ftp password (pw) : ax5 flags (f) : 0x8 Now enter NORMAL CODE mode. inflate 893232 bytes from 0xb0100000 to 0x94001000 inflate Finish Starting at 0x94001000... Target Name: vxTarget Adding 6611 symbols for standalone. ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] ]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R) ] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]] ]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]] ]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]] ]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]0x]] ]] ]]]] 9 4ff fdf0 (]]]]] ] tRootTask ]]]] ]): ]]]] ]]]]]]]Loading Ethernet Swi] ]]]] ]] ]]]] tch WAN End Driver..]]]]]]] ]]]] . 0 x]]]]]] ]]]]] 94fffdf0 ]]]]]] ( ] ]]]]] ]]]] tRootTask ]] ]]]] ): ]]]]]]]] ]]]]Memory setup complet e 0x]]]]]]] ]]]94fffdf0]] ] ]]] (]]] ] ]]] ]]tRootTask]] ]] ]]]): ] ]]]] ]]]] Done loading Etherne ]]]]tSwitch WAN END . 0x]]]]]]]] ]]]]94fffdf0] ]]] ]] (]]]]] ] ]tRootTask]]]]]] ]]]): ] ]]]] ]]]] ]Done loading Etherne]]]]tSwitch WAN END. 0x]]]]]]]]]]]]]]]94fffdf0]]]]]]]]]]]] (]]]tRootTask ): E]]]]]]]]]]]]]]]]]]]]thernetSwitchStart ]]]]]]]]] DeveinitEmacFlag = lopme0nt System ]]]]]]]]]]]]]]]]]]]]]]]]]]]] ]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks version 5.4 ]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.5 ]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-1999 CPU: Texas Instruments AP. Processor #0. Memory Size: 0x1000000. BSP version 1.2/1. WDB: Ready. -> Installed MIPS exception handler **** **** ******o*** ********_///_**** ******/_//_/***** ** ***(__|***** ********* **** *** *********************************** ** Texas Instruments *** **** 802.11g Access Point ***** *********************************** Version 5.2.2.22 - Creation Date/Time: Oct 7 2005 / 10:51:53 CPU type = TNETW5306 Board type = TNETWA1130V usrNetInit2 entry Bridge Initialization Succesful. Found brgEnd32 interface. Attaching IP stack to it. Setting IP address 192.168.1.2 for brgEnd32 interface. Attached TCP/IP interface to brgEnd unit 32 WAPP_ROOT: WLAN application Initialization Start... 802.11d is disabled. 802.11h is disabled. reset_acx111_vlynq() -- VLYNQ_RESET_ASSERT reset_acx111_vlynq() -- VLYNQ_RESET_DEASSERT reset_acx111_vlynq() -- VLYNQ_RESET_LINKESTABLISH, boosting clock reset_acx111_vlynq() -- INITOK 0x94ed9b50 (ROOT): boardInitVlynqDriverAcx111() -- return code = 0, driver state = 2 [dbg] Set Preamble Mode (2) whal_acxProcInitiate: found DEVICE_VENDOR ID = 0x9066104c whal_acxProcInitiate: Cpu halt -> download code whal_acxProcLoadFwImage: 0xa4000000, 0x0 whal_acxProcLoadFwImage() -- Loading FW image Detecting Radia bg radio whal_acxProcLoadFwImage: 1, pBuf=0x94215920, len=0x13b18 whal_acxProcLoadFwImage: 2, pBuf=0x94215920, len=0x13b18 whal_acxProcLoadFwImage: 3, pBuf=0x94215920, len=0x13b18, DataLen=0x13b10 whal_acxProcLoadFwImage: 4, pBuf=0x94215920, len=0x13b18 whal_acxProcLoadFwImage: Checksum, calc=0x6b8d07, file=0x6b8d07 pBuf=0x94215920, len=0x13b18 whal_acxProcInitiate: run whal_acxProcWaitInitComplete: whal_acxMboxInit: pCmdMbox=0xa401dd00, pInfoMbox=0xa401de88 Whal Tracer Disable ---------------------------------------------------------------- ACX Firmaware Version = Rev 0.8.0.40 ---------------------------------------------------------------- whal_acxProcConfigure: templates (beacon, probe response, tim) for [0] Network whal_acxProcConfigure: Host Queue is in 0x94e8fa70 TxQueue[0] NumDesc = 32 TxQueue[0] Priority = 0 TxQueue[1] NumDesc = 32 TxQueue[1] Priority = 129 whal_acxConfigMemory() -- HostRxDescriptorsAddr = 14e8fa70 RxQueue NumDesc = 32 RxQueue Priority = 0 RxQueue type = 7 whal_acxProcConfigure: WEP cache whal_acxProcConfigure: read queue heads whal_acxConfigRead_QueueHead() - RxMemBlkQ - 00015240 RxQueueHead - 00012834 TxMemBlkQ - 0001b140 TxMemBlkQ[0]- 00012eb4 TxMemBlkQ[1]- 00013534 whal_acxProcConfigure: configure RxQueue/TxQueue objects whal_txQueue_Init: [Qid=0] HwBaseAddr=0xa4012eb4, NumDesc=32 whal_txQueue_Init: [Qid=1] HwBaseAddr=0xa4013534, NumDesc=32 whal_ParamsPrintMemMap: Code (0x00000000, 0x00011e08) Wep (0x00012100, 0x00012210) Sta (0x00012210, 0x00012818) Tmpl (0x00011e24, 0x00011ede) Queue (0x00012834, 0x00013bb4) Pool (0x00015240, 0x0001c740) whal_apiConfig: beaconInterval = 200 WATCH_DOG_TIMER_VAL = 520 wd_beacon_limiter = 1 Attaching network interface lo0... done. [00:00:00.010]WDRV_WPA: WPA Is Openning AP DEV port [00:00:00.070]WDRV_WPA: WPA module initialized successfully [dbg] Intoto iGateway File System... [dbg] Intoto iGateway DHCP client... [dbg] Intoto iGateway HTTP server... [dbg] register Web page's Callback func. and Tag... [00:00:03.470]WDRV_MAINSM: WLAN Driver initialized successfully [00:00:03.470]WAPP_ROOT: WLAN application Initialization Ended Successfully [00:00:03.470]WDRV_4X: 4x Disabled [00:00:03.470]WDRV_4X: Concatenation Disabled [00:00:03.470]WDRV_4X: Ack Emulation Disabled [00:00:03.470]whal_apiStartBss: Enable Tx, Rx and Start the Bss [00:00:03.470]-[dbg] Bypass (Auto-WLAN Security) Connection State --------------------------------------------------------------- [00:00:03.470]---------------------------------------------------------------- [00:00:03.470] START BSS, SSID=ZyXEL G-560, BSSID=00-A0-C5-93-1B-61 [00:00:03.470]---------------------------------------------------------------- [00:00:03.470]---------------------------------------------------------------- [00:00:03.470] AP Power Level = 1 [00:00:03.470] Regulatory Domain = FCC [00:00:03.470] Net[0] : Channel=6 [00:00:03.470]---------------------------------------------------------------- [00:00:03.490]FW Watchdog is Enabled standard_tftp_server launched on port 69.

OpenWrt bootlog

PUT HERE YOUR BOOTLOG

Notes

Tags

For some Help with the Tags, please have a look here: tags

Back to top

toh/zyxel/zyxel_g560.txt · Last modified: 2013/11/12 22:54 by tesarmar